From: "Guy Watkins" <linux-raid@watkins-home.com>
To: 'Mikael Abrahamsson' <swmike@swm.pp.se>, linux-raid@vger.kernel.org
Subject: RE: SSD - TRIM command
Date: Mon, 21 Feb 2011 21:22:35 -0500 [thread overview]
Message-ID: <FA27C2E0242645B795811DDF282BFA05@m5> (raw)
In-Reply-To: <alpine.DEB.1.10.1102220300400.11974@uplift.swm.pp.se>
} -----Original Message-----
} From: linux-raid-owner@vger.kernel.org [mailto:linux-raid-
} owner@vger.kernel.org] On Behalf Of Mikael Abrahamsson
} Sent: Monday, February 21, 2011 9:02 PM
} To: linux-raid@vger.kernel.org
} Subject: Re: SSD - TRIM command
}
} On Mon, 21 Feb 2011, Roberto Spadim wrote:
}
} > it can be used for badblock reallocation if harddisk have it a harddisk
} > is near to NOR ssd with variable accesstime, if head is near sector to
} > be read/write accesstime is small, if sector is far from head, access
} > time increase (normaly <=1 disk revolution if head control system is
} > good, for 7200rpm 1revolution is near to 8.33ms)
}
} Could we please stop this discussion. If you think HDDs should have this
} kind of bad sector reallocation scheme, please go to the HDD manufacturers
} and lobby to them. It is not on-topic for linux-raid ml.
}
} --
} Mikael Abrahamsson email: swmike@swm.pp.se
What about tape drives? :)
next prev parent reply other threads:[~2011-02-22 2:22 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-07 20:07 SSD - TRIM command Roberto Spadim
2011-02-08 17:37 ` maurice
2011-02-08 18:31 ` Roberto Spadim
[not found] ` <AANLkTik5SumqyTN5LZVntna8nunvPe7v38TSFf9eCfcU@mail.gmail.com>
2011-02-08 20:50 ` Roberto Spadim
2011-02-08 21:18 ` maurice
2011-02-08 21:33 ` Roberto Spadim
2011-02-09 7:44 ` Stan Hoeppner
2011-02-09 9:05 ` Eric D. Mudama
2011-02-09 15:45 ` Chris Worley
2011-02-09 13:29 ` David Brown
2011-02-09 14:39 ` Roberto Spadim
2011-02-09 15:00 ` Scott E. Armitage
2011-02-09 15:52 ` Chris Worley
2011-02-09 19:15 ` Doug Dumitru
2011-02-09 19:22 ` Roberto Spadim
2011-02-09 16:19 ` Eric D. Mudama
2011-02-09 16:28 ` Scott E. Armitage
2011-02-09 17:17 ` Eric D. Mudama
2011-02-09 18:18 ` Roberto Spadim
2011-02-09 18:24 ` Piergiorgio Sartor
2011-02-09 18:30 ` Roberto Spadim
2011-02-09 18:38 ` Piergiorgio Sartor
2011-02-09 18:46 ` Roberto Spadim
2011-02-09 18:52 ` Roberto Spadim
2011-02-09 19:13 ` Piergiorgio Sartor
2011-02-09 19:16 ` Roberto Spadim
2011-02-09 19:21 ` Piergiorgio Sartor
2011-02-09 19:27 ` Roberto Spadim
2011-02-21 18:24 ` Phillip Susi
2011-02-21 18:30 ` Roberto Spadim
2011-02-09 15:49 ` David Brown
2011-02-21 18:20 ` Phillip Susi
2011-02-21 18:25 ` Roberto Spadim
2011-02-21 18:34 ` Phillip Susi
2011-02-21 18:48 ` Roberto Spadim
2011-02-21 18:51 ` Mathias Burén
2011-02-21 19:32 ` Roberto Spadim
2011-02-21 19:38 ` Mathias Burén
2011-02-21 19:39 ` Mathias Burén
2011-02-21 19:43 ` Roberto Spadim
2011-02-21 20:45 ` Phillip Susi
2011-02-21 19:39 ` Roberto Spadim
2011-02-21 19:51 ` Doug Dumitru
2011-02-21 19:57 ` Roberto Spadim
2011-02-21 20:47 ` Phillip Susi
2011-02-21 21:02 ` Mathias Burén
2011-02-21 22:52 ` Roberto Spadim
2011-02-21 23:41 ` Mathias Burén
2011-02-21 23:42 ` Mathias Burén
2011-02-21 23:52 ` Roberto Spadim
2011-02-22 0:25 ` Mathias Burén
2011-02-22 0:30 ` Brendan Conoboy
2011-02-22 0:36 ` Eric D. Mudama
2011-02-22 1:46 ` Roberto Spadim
2011-02-22 1:52 ` Mathias Burén
2011-02-22 1:55 ` Roberto Spadim
2011-02-22 2:01 ` Eric D. Mudama
2011-02-22 2:02 ` Mikael Abrahamsson
2011-02-22 2:22 ` Guy Watkins [this message]
2011-02-22 2:27 ` Roberto Spadim
2011-02-22 3:45 ` NeilBrown
2011-02-22 4:37 ` Roberto Spadim
2011-02-22 2:38 ` Phillip Susi
2011-02-22 3:29 ` Roberto Spadim
2011-02-22 3:42 ` Roberto Spadim
2011-02-22 4:04 ` Phillip Susi
2011-02-22 4:30 ` Roberto Spadim
2011-02-22 14:45 ` Phillip Susi
2011-02-22 17:15 ` Roberto Spadim
2011-02-22 0:32 ` Eric D. Mudama
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=FA27C2E0242645B795811DDF282BFA05@m5 \
--to=linux-raid@watkins-home.com \
--cc=linux-raid@vger.kernel.org \
--cc=swmike@swm.pp.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.