From mboxrd@z Thu Jan 1 00:00:00 1970 From: Woodruff, Richard Date: Tue, 22 Jul 2003 19:12:33 -0500 Subject: [U-Boot-Users] ECC code used in cmd_nand.c Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello, Can anyone verify that the write using "nand write aaaa offf ssss" should work with ECC enabled? I'm finding that if I disable the ECC generation I can write uImages and compare them and get what I expect and boot from them. If I enable ECC generation, on read it complains that they are all wrong (but there is no errors on the write which I think it should give if the written ecc does not match the calculated one). If I disregard the ecc warnings and then "cmp" the data starting which was loaded, the first 16k are indeed the same (16k is my block size), however, there is some differences at the end of the first block. Again, if I disable ECC no such problem. ...If I do a read.oob of the first block, it appears that the data_buf[0] is written to the first position of the oob, instead of the expected data. Regards/Thanks for any info, Richard W. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.denx.de/pipermail/u-boot/attachments/20030722/7882c023/attachment.htm