From mboxrd@z Thu Jan 1 00:00:00 1970 From: Avi Shchislowski Subject: [RFC PATCH 1/1 ]mmc: Support-FFU-for-eMMC-v5.0 Date: Sun, 9 Feb 2014 09:07:39 +0000 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT Return-path: Received: from co1ehsobe005.messaging.microsoft.com ([216.32.180.188]:17161 "EHLO co1outboundpool.messaging.microsoft.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751469AbaBIJHn convert rfc822-to-8bit (ORCPT ); Sun, 9 Feb 2014 04:07:43 -0500 Content-Language: en-US Sender: linux-mmc-owner@vger.kernel.org List-Id: linux-mmc@vger.kernel.org To: "'cjb@laptop.org'" , "linux-mmc@vger.kernel.org" Cc: Grant Grundler , Alex Lemberg Add Support to Field Firmware Update (FFU) for eMMC v5.0 and up devices. The code implemented according to JEDEC eMMC spec - JESD84-B50.pdf http://www.jedec.org/standards-documents/technology-focus-areas/flash-memory-ssds-ufs-emmc/e-mmc Signed-off-by: Avi Shchislowski Signed-off-by: Alex Lemberg diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig index 5562308..19ba729 100644 --- a/drivers/mmc/card/Kconfig +++ b/drivers/mmc/card/Kconfig @@ -68,3 +68,11 @@ config MMC_TEST This driver is only of interest to those developing or testing a host driver. Most people should say N here. + +config MMC_FFU + bool "FFU SUPPORT" + depends on MMC != n + help + This is an option to run firmware update on eMMC 5.0. + Field firmware updates (FFU) enables features enhancement + in the field. diff --git a/drivers/mmc/card/Makefile b/drivers/mmc/card/Makefile index c73b406..1e9223b 100644 --- a/drivers/mmc/card/Makefile +++ b/drivers/mmc/card/Makefile @@ -8,3 +8,4 @@ obj-$(CONFIG_MMC_TEST) += mmc_test.o obj-$(CONFIG_SDIO_UART) += sdio_uart.o +obj-$(CONFIG_MMC_FFU) += ffu.o diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 7b5424f..8311200 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -41,6 +41,7 @@ #include #include #include +#include #include @@ -525,6 +526,17 @@ static int mmc_blk_ioctl_cmd(struct block_device *bdev, mmc_get_card(card); + if (cmd.opcode == MMC_FFU_DOWNLOAD_OP) { + err = mmc_ffu_download(card, &cmd , idata->buf, + idata->buf_bytes); + goto cmd_rel_host; + } + + if (cmd.opcode == MMC_FFU_INSTALL_OP) { + err = mmc_ffu_install(card); + goto cmd_rel_host; + } + err = mmc_blk_part_switch(card, md); if (err) goto cmd_rel_host; diff --git a/drivers/mmc/card/ffu.c b/drivers/mmc/card/ffu.c new file mode 100644 index 0000000..ed5f30a --- /dev/null +++ b/drivers/mmc/card/ffu.c @@ -0,0 +1,605 @@ +/* + * * ffu.c + * + * Modified by SanDisk Corp., Copyright (c) 2013 SanDisk Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or +(at + * your option) any later version. + * + * The original, unmodified version of this program - the mmc_test.c + * Copyright 2007-2008 Pierre Ossman + * The file - is obtained under the GPL v2.0 license that is available +via + * http://www.gnu.org/licenses/, + * or http://www.opensource.org/licenses/gpl-2.0.php +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/** + * struct mmc_ffu_pages - pages allocated by 'alloc_pages()'. + * @page: first page in the allocation + * @order: order of the number of pages allocated */ struct +mmc_ffu_pages { + struct page *page; + unsigned int order; +}; + +/** + * struct mmc_ffu_mem - allocated memory. + * @arr: array of allocations + * @cnt: number of allocations + */ +struct mmc_ffu_mem { + struct mmc_ffu_pages *arr; + unsigned int cnt; +}; + +struct mmc_ffu_area { + unsigned long max_sz; + unsigned int max_tfr; + unsigned int max_segs; + unsigned int max_seg_sz; + unsigned int blocks; + unsigned int sg_len; + struct mmc_ffu_mem *mem; + struct scatterlist *sg; +}; + +static void mmc_ffu_prepare_mrq(struct mmc_card *card, + struct mmc_request *mrq, struct scatterlist *sg, unsigned int sg_len, + u32 arg, unsigned int blocks, unsigned int blksz, int write) { + BUG_ON(!mrq || !mrq->cmd || !mrq->data || !mrq->stop); + + if (blocks > 1) { + mrq->cmd->opcode = write ? + MMC_WRITE_MULTIPLE_BLOCK : MMC_READ_MULTIPLE_BLOCK; + } else { + mrq->cmd->opcode = write ? MMC_WRITE_BLOCK : + MMC_READ_SINGLE_BLOCK; + } + + mrq->cmd->arg = arg; + if (!mmc_card_blockaddr(card)) + mrq->cmd->arg <<= 9; + + mrq->cmd->flags = MMC_RSP_R1 | MMC_CMD_ADTC; + if (blocks == 1) { + mrq->stop = NULL; + } else { + mrq->stop->opcode = MMC_STOP_TRANSMISSION; + mrq->stop->arg = 0; + mrq->stop->flags = MMC_RSP_R1B | MMC_CMD_AC; + } + + mrq->data->blksz = blksz; + mrq->data->blocks = blocks; + mrq->data->flags = write ? MMC_DATA_WRITE : MMC_DATA_READ; + mrq->data->sg = sg; + mrq->data->sg_len = sg_len; + + mmc_set_data_timeout(mrq->data, card); } + +/* + * Checks that a normal transfer didn't have any errors */ static int +mmc_ffu_check_result(struct mmc_request *mrq) { + BUG_ON(!mrq || !mrq->cmd || !mrq->data); + + if (mrq->cmd->error != 0) + return -EINVAL; + + if (mrq->data->error != 0) + return -EINVAL; + + if (mrq->stop != NULL && mrq->stop->error != 0) + return -1; + + if (mrq->data->bytes_xfered != (mrq->data->blocks * mrq->data->blksz)) + return -EINVAL; + + return 0; +} + +static int mmc_ffu_busy(struct mmc_command *cmd) { + return !(cmd->resp[0] & R1_READY_FOR_DATA) || + (R1_CURRENT_STATE(cmd->resp[0]) == R1_STATE_PRG); } + +static int mmc_ffu_wait_busy(struct mmc_card *card) { + int ret, busy = 0; + struct mmc_command cmd = {0}; + + memset(&cmd, 0, sizeof(struct mmc_command)); + cmd.opcode = MMC_SEND_STATUS; + cmd.arg = card->rca << 16; + cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC; + + do { + ret = mmc_wait_for_cmd(card->host, &cmd, 0); + if (ret) + break; + + if (!busy && mmc_ffu_busy(&cmd)) { + busy = 1; + if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) { + pr_warn("%s: Warning: Host did not " + "wait for busy state to end.\n", + mmc_hostname(card->host)); + } + } + + } while (mmc_ffu_busy(&cmd)); + + return ret; +} + +/* + * transfer with certain parameters + */ +static int mmc_ffu_simple_transfer(struct mmc_card *card, + struct scatterlist *sg, unsigned int sg_len, u32 arg, + unsigned int blocks, unsigned int blksz, int write) { + struct mmc_request mrq = {0}; + struct mmc_command cmd = {0}; + struct mmc_command stop = {0}; + struct mmc_data data = {0}; + + mrq.cmd = &cmd; + mrq.data = &data; + mrq.stop = &stop; + mmc_ffu_prepare_mrq(card, &mrq, sg, sg_len, arg, blocks, blksz, + write); + mmc_wait_for_req(card->host, &mrq); + + mmc_ffu_wait_busy(card); + + return mmc_ffu_check_result(&mrq); } + +/* + * Map memory into a scatterlist. + */ +static int mmc_ffu_map_sg(struct mmc_ffu_mem *mem, unsigned long size, + struct scatterlist *sglist, unsigned int max_segs, + unsigned int max_seg_sz, unsigned int *sg_len, + int min_sg_len) +{ + struct scatterlist *sg = NULL; + unsigned int i; + unsigned long sz = size; + + sg_init_table(sglist, max_segs); + if (min_sg_len > max_segs) + min_sg_len = max_segs; + + *sg_len = 0; + do { + for (i = 0; i < mem->cnt; i++) { + unsigned long len = PAGE_SIZE << + mem->arr[i].order; + + if (min_sg_len && (size / min_sg_len < len)) + len = ALIGN(size / min_sg_len, CARD_BLOCK_SIZE); + if (len > sz) + len = sz; + if (len > max_seg_sz) + len = max_seg_sz; + if (sg) + sg = sg_next(sg); + else + sg = sglist; + if (!sg) + return -EINVAL; + sg_set_page(sg, mem->arr[i].page, len, 0); + sz -= len; + *sg_len += 1; + if (!sz) + break; + } + } while (sz); + + if (sg) + sg_mark_end(sg); + + return 0; +} + +static void mmc_ffu_free_mem(struct mmc_ffu_mem *mem) { + if (!mem) + return; + while (mem->cnt--) + __free_pages(mem->arr[mem->cnt].page, mem->arr[mem->cnt].order); + kfree(mem->arr); +} + +/* + * Cleanup struct mmc_ffu_area. + */ +static int mmc_ffu_area_cleanup(struct mmc_ffu_area *area) { + kfree(area->sg); + mmc_ffu_free_mem(area->mem); + + return 0; +} + +/* + * Allocate a lot of memory, preferably max_sz but at least min_sz. In +case + * there isn't much memory do not exceed 1/16th total low mem pages. +Also do + * not exceed a maximum number of segments and try not to make segments +much + * bigger than maximum segment size. + */ +static struct mmc_ffu_mem *mmc_ffu_alloc_mem(unsigned long min_sz, + unsigned long max_sz, unsigned int max_segs, unsigned int +max_seg_sz) { + unsigned long max_page_cnt = DIV_ROUND_UP(max_sz, PAGE_SIZE); + unsigned long min_page_cnt = DIV_ROUND_UP(min_sz, PAGE_SIZE); + unsigned long max_seg_page_cnt = DIV_ROUND_UP(max_seg_sz, PAGE_SIZE); + unsigned long page_cnt = 0; + unsigned long limit = nr_free_buffer_pages() >> 4; + struct mmc_ffu_mem *mem; + + if (max_page_cnt > limit) + max_page_cnt = limit; + if (min_page_cnt > max_page_cnt) + min_page_cnt = max_page_cnt; + + if (max_seg_page_cnt > max_page_cnt) + max_seg_page_cnt = max_page_cnt; + + if (max_segs > max_page_cnt) + max_segs = max_page_cnt; + + mem = kzalloc(sizeof(struct mmc_ffu_mem), GFP_KERNEL); + if (!mem) + return NULL; + + mem->arr = kzalloc(sizeof(struct mmc_ffu_pages) * max_segs, GFP_KERNEL); + if (!mem->arr) + goto out_free; + + while (max_page_cnt) { + struct page *page; + unsigned int order; + gfp_t flags = GFP_KERNEL | GFP_DMA | __GFP_NOWARN | + __GFP_NORETRY; + + order = get_order(max_seg_page_cnt << PAGE_SHIFT); + while (1) { + page = alloc_pages(flags, order); + if (page || !order) + break; + order -= 1; + } + if (!page) { + if (page_cnt < min_page_cnt) + goto out_free; + break; + } + mem->arr[mem->cnt].page = page; + mem->arr[mem->cnt].order = order; + mem->cnt += 1; + if (max_page_cnt <= (1UL << order)) + break; + max_page_cnt -= 1UL << order; + page_cnt += 1UL << order; + if (mem->cnt >= max_segs) { + if (page_cnt < min_page_cnt) + goto out_free; + break; + } + } + + return mem; + +out_free: + mmc_ffu_free_mem(mem); + return NULL; +} + +/* + * Initialize an area for data transfers. + * Copy the data to the allocated pages. + */ +static int mmc_ffu_area_init(struct mmc_ffu_area *area, struct mmc_card *card, + u8 *data, unsigned int size) +{ + int ret, i, length; + + area->max_segs = card->host->max_segs; + area->max_seg_sz = card->host->max_seg_size & ~(CARD_BLOCK_SIZE - 1); + area->max_tfr = size; + + if (area->max_tfr >> 9 > card->host->max_blk_count) + area->max_tfr = card->host->max_blk_count << 9; + if (area->max_tfr > card->host->max_req_size) + area->max_tfr = card->host->max_req_size; + if (area->max_tfr / area->max_seg_sz > area->max_segs) + area->max_tfr = area->max_segs * area->max_seg_sz; + + /* + * Try to allocate enough memory for a max. sized transfer. Less is OK + * because the same memory can be mapped into the scatterlist more than + * once. Also, take into account the limits imposed on scatterlist + * segments by the host driver. + */ + area->mem = mmc_ffu_alloc_mem(1, area->max_tfr, area->max_segs, + area->max_seg_sz); + if (!area->mem) + return -ENOMEM; + + /* copy data to page */ + length = 0; + for (i = 0; i < area->mem->cnt; i++) { + memcpy(page_address(area->mem->arr[i].page), data + length, + min(size - length, area->max_seg_sz)); + length += area->max_seg_sz; + } + + area->sg = kmalloc(sizeof(struct scatterlist) * area->max_segs, + GFP_KERNEL); + if (!area->sg) { + ret = -ENOMEM; + goto out_free; + } + + ret = mmc_ffu_map_sg(area->mem, size, area->sg, + area->max_segs, area->max_seg_sz, &area->sg_len, + 1); + + if (ret != 0) + goto out_free; + + return 0; + +out_free: + mmc_ffu_area_cleanup(area); + return ret; +} + +static int mmc_ffu_write(struct mmc_card *card, u8 *src, u32 arg, + int size) +{ + int rc; + struct mmc_ffu_area mem; + + mem.sg = NULL; + mem.mem = NULL; + + if (!src) { + pr_err("FFU: %s: data buffer is NULL\n", + mmc_hostname(card->host)); + return -EINVAL; + } + rc = mmc_ffu_area_init(&mem, card, src, size); + if (rc != 0) + goto exit; + + rc = mmc_ffu_simple_transfer(card, mem.sg, mem.sg_len, arg, + size / CARD_BLOCK_SIZE, CARD_BLOCK_SIZE, 1); + +exit: + mmc_ffu_area_cleanup(&mem); + return rc; +} +/* Flush all scheduled work from the MMC work queue. + * and initialize the MMC device */ +static int mmc_ffu_restart(struct mmc_card *card) { + struct mmc_host *host = card->host; + int err = 0; + + mmc_cache_ctrl(host, 0); + err = mmc_power_save_host(host); + if (err) { + pr_warn("%s: going to sleep failed (%d)!!!\n", + __func__ , err); + goto exit; + } + + err = mmc_power_restore_host(host); + +exit: + + return err; +} + +/* Host set the EXT_CSD */ +static int mmc_host_set_ffu(struct mmc_card *card, u32 ffu_enable) { + int err; + + /* check if card is eMMC 5.0 or higher */ + if (card->ext_csd.rev < 7) + return -EINVAL; + + if (FFU_ENABLED(ffu_enable)) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_FW_CONFIG, MMC_FFU_ENABLE, + card->ext_csd.generic_cmd6_time); + if (err) { + pr_err("%s: switch to FFU failed with error %d\n", + mmc_hostname(card->host), err); + return err; + } + } + + return 0; +} + +int mmc_ffu_download(struct mmc_card *card, struct mmc_command *cmd, + u8 *data, int buf_bytes) +{ + u8 ext_csd[CARD_BLOCK_SIZE]; + int err; + int ret; + + /* Read the EXT_CSD */ + err = mmc_send_ext_csd(card, ext_csd); + if (err) { + pr_err("FFU: %s: error %d sending ext_csd\n", + mmc_hostname(card->host), err); + goto exit; + } + + /* Check if FFU is supported by card */ + if (!FFU_SUPPORTED_MODE(ext_csd[EXT_CSD_SUPPORTED_MODE])) { + err = -EINVAL; + pr_err("FFU: %s: error %d FFU is not supported\n", + mmc_hostname(card->host), err); + goto exit; + } + + err = mmc_host_set_ffu(card, ext_csd[EXT_CSD_FW_CONFIG]); + if (err) { + pr_err("FFU: %s: error %d FFU is not supported\n", + mmc_hostname(card->host), err); + err = -EINVAL; + goto exit; + } + + /* set device to FFU mode */ + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_MODE_CONFIG, + MMC_FFU_MODE_SET, card->ext_csd.generic_cmd6_time); + if (err) { + pr_err("FFU: %s: error %d FFU is not supported\n", + mmc_hostname(card->host), err); + goto exit_normal; + } + + /* set CMD ARG */ + cmd->arg = ext_csd[EXT_CSD_FFU_ARG] | + ext_csd[EXT_CSD_FFU_ARG + 1] << 8 | + ext_csd[EXT_CSD_FFU_ARG + 2] << 16 | + ext_csd[EXT_CSD_FFU_ARG + 3] << 24; + + err = mmc_ffu_write(card, data, cmd->arg, buf_bytes); + +exit_normal: + /* host switch back to work in normal MMC Read/Write commands */ + ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_MODE_CONFIG, MMC_FFU_MODE_NORMAL, + card->ext_csd.generic_cmd6_time); + if (ret) + err = ret; + +exit: + return err; +} +EXPORT_SYMBOL(mmc_ffu_download); + +int mmc_ffu_install(struct mmc_card *card) { + u8 ext_csd[CARD_BLOCK_SIZE]; + int err; + u32 ffu_data_len; + u32 timeout; + + err = mmc_send_ext_csd(card, ext_csd); + if (err) { + pr_err("FFU: %s: error %d sending ext_csd\n", + mmc_hostname(card->host), err); + goto exit; + } + + /* Check if FFU is supported */ + if (!FFU_SUPPORTED_MODE(ext_csd[EXT_CSD_SUPPORTED_MODE]) || + FFU_CONFIG(ext_csd[EXT_CSD_FW_CONFIG])) { + err = -EINVAL; + pr_err("FFU: %s: error %d FFU is not supported\n", + mmc_hostname(card->host), err); + goto exit; + } + + ffu_data_len = ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG]| + ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG + 1] << 8 | + ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG + 2] << 16 | + ext_csd[EXT_CSD_NUM_OF_FW_SEC_PROG + 3] << 24; + + if (!ffu_data_len) { + err = -EPERM; + return err; + } + + /* check mode operation */ + if (!FFU_FEATURES(ext_csd[EXT_CSD_FFU_FEATURES])) { + /* restart the eMMC */ + err = mmc_ffu_restart(card); + if (err) { + pr_err("FFU: %s: error %d FFU install:\n", + mmc_hostname(card->host), err); + } + } else { + /* set device to FFU mode */ + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_MODE_CONFIG, 0x1, + card->ext_csd.generic_cmd6_time); + if (err) { + pr_err("FFU: %s: error %d FFU is not supported\n", + mmc_hostname(card->host), err); + goto exit; + } + + timeout = ext_csd[EXT_CSD_OPERATION_CODE_TIMEOUT]; + if (timeout == 0 || timeout > 0x17) { + timeout = 0x17; + pr_warn("FFU: %s: operation code timeout is out " + "of range. Using maximum timeout.\n", + mmc_hostname(card->host)); + } + + /* timeout is at millisecond resolution */ + timeout = (100 * (1 << timeout) / 1000) + 1; + + /* set ext_csd to install mode */ + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_MODE_OPERATION_CODES, + MMC_FFU_INSTALL_SET, timeout); + + if (err) { + pr_err("FFU: %s: error %d setting install mode\n", + mmc_hostname(card->host), err); + goto exit; + } + + /* read ext_csd */ + err = mmc_send_ext_csd(card, ext_csd); + if (err) { + pr_err("FFU: %s: error %d sending ext_csd\n", + mmc_hostname(card->host), err); + goto exit; + } + /* return status */ + err = ext_csd[EXT_CSD_FFU_STATUS]; + if (err) { + pr_err("FFU: %s: error %d FFU install:\n", + mmc_hostname(card->host), err); + err = -EINVAL; + goto exit; + } + } + +exit: + return err; +} +EXPORT_SYMBOL(mmc_ffu_install); + diff --git a/include/linux/mmc/ffu.h b/include/linux/mmc/ffu.h new file mode 100644 index 0000000..744696c --- /dev/null +++ b/include/linux/mmc/ffu.h @@ -0,0 +1,63 @@ +/* + * + * ffu.h + * + * Copyright (c) 2013 SanDisk Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or +(at + * your option) any later version. + * + * This program was created by SanDisk Corp + * The swrm_mmc_api.h file is obtained under the GPL v2.0 license that +is + * available via http://www.gnu.org/licenses/, + * or http://www.opensource.org/licenses/gpl-2.0.php +*/ + +#if !defined(_FFU_H_) +#define _FFU_H_ + +#include + +#define CARD_BLOCK_SIZE 512 + +/* + * eMMC5.0 Field Firmware Update (FFU) opcodes */ #define +MMC_FFU_DOWNLOAD_OP 302 #define MMC_FFU_INSTALL_OP 303 + +#define MMC_FFU_MODE_SET 0x1 +#define MMC_FFU_MODE_NORMAL 0x0 +#define MMC_FFU_INSTALL_SET 0x1 + +#ifdef CONFIG_MMC_FFU +#define MMC_FFU_ENABLE 0x0 +#define MMC_FFU_CONFIG 0x1 +#define MMC_FFU_SUPPORTED_MODES 0x1 +#define MMC_FFU_FEATURES 0x1 + +#define FFU_ENABLED(ffu_enable) (ffu_enable & MMC_FFU_CONFIG) +#define FFU_SUPPORTED_MODE(ffu_sup_mode) \ + (ffu_sup_mode && MMC_FFU_SUPPORTED_MODES) #define +FFU_CONFIG(ffu_config) (ffu_config & MMC_FFU_CONFIG) #define +FFU_FEATURES(ffu_fetures) (ffu_fetures & MMC_FFU_FEATURES) + +int mmc_ffu_download(struct mmc_card *card, struct mmc_command *cmd, + u8 *data, int buf_bytes); +int mmc_ffu_install(struct mmc_card *card); #else static inline int +mmc_ffu_download(struct mmc_card *card, + struct mmc_command *cmd, u8 *data, int buf_bytes) { + return -ENOSYS; +} +static inline int mmc_ffu_install(struct mmc_card *card) { + return -ENOSYS; +} + +#endif +#endif /* FFU_H_ */ + diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 50bcde3..bf29e52 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -272,6 +272,9 @@ struct _mmc_csd { * EXT_CSD fields */ +#define EXT_CSD_FFU_STATUS 26 /* R */ +#define EXT_CSD_MODE_OPERATION_CODES 29 /* W */ +#define EXT_CSD_MODE_CONFIG 30 /* R/W */ #define EXT_CSD_FLUSH_CACHE 32 /* W */ #define EXT_CSD_CACHE_CTRL 33 /* R/W */ #define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */ @@ -290,6 +293,7 @@ struct _mmc_csd { #define EXT_CSD_SANITIZE_START 165 /* W */ #define EXT_CSD_WR_REL_PARAM 166 /* RO */ #define EXT_CSD_RPMB_MULT 168 /* RO */ +#define EXT_CSD_FW_CONFIG 169 /* R/W */ #define EXT_CSD_BOOT_WP 173 /* R/W */ #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ #define EXT_CSD_PART_CONFIG 179 /* R/W */ @@ -325,6 +329,11 @@ struct _mmc_csd { #define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ #define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ #define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */ +#define EXT_CSD_NUM_OF_FW_SEC_PROG 302 /* RO */ +#define EXT_CSD_FFU_ARG 487 /* RO, 4 bytes */ +#define EXT_CSD_OPERATION_CODE_TIMEOUT 491 /* RO */ +#define EXT_CSD_FFU_FEATURES 492 /* RO */ +#define EXT_CSD_SUPPORTED_MODE 493 /* RO */ #define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */ #define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */ #define EXT_CSD_MAX_PACKED_WRITES 500 /* RO */ -- 1.7.5.4