Re: [SPDK] Need help for iSCSI configuration for NVMe disc

[Liu, Changpeng <changpeng.liu at intel.com>]

[-- Attachment #1: Type: text/plain, Size: 4787 bytes --]

Hi Kiran,

Can you try set TransportID “trtype:PCIe traddr:0000.0a:00.0” Nvme3  in your configuration file, and also
change your “LUN0 Nvme3” with “LUN0 Nvme3n1” ?

Nvme3 is not a block device name


From: SPDK [mailto:spdk-bounces(a)lists.01.org] On Behalf Of Harris, James R
Sent: Friday, May 26, 2017 11:42 PM
To: Kiran Dikshit <kdikshit(a)cloudsimple.com>
Cc: Storage Performance Development Kit <spdk(a)lists.01.org>
Subject: Re: [SPDK] Need help for iSCSI configuration for NVMe disc

Hi Kiran,

Could you attach the following:


1)      A log of “lspci –vvv”

2)      Your full SPDK iscsi.conf file

3)      A full log of the iscsi_tgt output.  Please enable debug (./configure --enable-debug) and add “-t all” to your command line to enable some extra debug logging

Thanks,

-Jim


From: Kiran Dikshit <kdikshit(a)cloudsimple.com<mailto:kdikshit(a)cloudsimple.com>>
Date: Thursday, May 25, 2017 at 7:07 PM
To: James Harris <james.r.harris(a)intel.com<mailto:james.r.harris(a)intel.com>>
Cc: Storage Performance Development Kit <spdk(a)lists.01.org<mailto:spdk(a)lists.01.org>>
Subject: Re: [SPDK] Need help for iSCSI configuration for NVMe disc

Hi Harris,

After the previous mail, i did check out the masters and DPDK version 17.05 and found the same issue.

SPDK git commit ID : 5597e835c8981d6500d00c0f88fd10edae173621

Thank you
Kiran

On 26-May-2017, at 12:38 AM, Harris, James R <james.r.harris(a)intel.com<mailto:james.r.harris(a)intel.com>> wrote:

Hi Kiran,

Can you confirm which SPDK git commit ID you are working from?  Since there have been changes in this transport ID format, I want to make sure I provide you the correct details based on the SPDK version you are using.

Thanks,

-Jim


From: Kiran Dikshit <kdikshit(a)cloudsimple.com<mailto:kdikshit(a)cloudsimple.com>>
Date: Wednesday, May 24, 2017 at 10:50 PM
To: James Harris <james.r.harris(a)intel.com<mailto:james.r.harris(a)intel.com>>
Cc: Storage Performance Development Kit <spdk(a)lists.01.org<mailto:spdk(a)lists.01.org>>
Subject: Re: [SPDK] Need help for iSCSI configuration for NVMe disc

Hi Harris,

I did try with the TransportID “trtype:PCIe traddr:0000.0a:00.0” Nvme3  option i am still seeing the same issue.

Thank you
Kiran

On 24-May-2017, at 9:50 PM, Harris, James R <james.r.harris(a)intel.com<mailto:james.r.harris(a)intel.com>> wrote:


On May 24, 2017, at 4:10 AM, Kiran Dikshit <kdikshit(a)cloudsimple.com<mailto:kdikshit(a)cloudsimple.com>> wrote:

Hi All,

I am trying to configure iSCSI for a NVMe drive and getting the below error’s. I have unbound the NVMe drive from kernel using the setup.sh.

tgt_node.c: 718:spdk_iscsi_tgt_node_construct: ***ERROR*** Could not construct SCSI device
tgt_node.c: 984:spdk_cf_add_iscsi_tgt_node: ***ERROR*** tgt_node1: add_iscsi_target_node error
tgt_node.c:1010:spdk_iscsi_init_tgt_nodes: ***ERROR*** spdk_cf_add_iscsi_tgt_node() failed
iscsi_subsystem.c: 965:spdk_iscsi_subsystem_init: ***ERROR*** spdk_iscsi_init_tgt_nodes() failed
app.c: 404:spdk_app_init: ***ERROR*** spdk_subsystem_init() failed



Below is the section of my iscsi.conf.in<http://iscsi.conf.in/> file for reference.

# NVMe configuration options
[Nvme]
# NVMe Device Whitelist
# Users may specify which NVMe devices to claim by their PCI
# domain, bus, device, and function. The format is dddd:bb:dd.f, which is
# the same format displayed by lspci or in /sys/bus/pci/devices. The second
# argument is a "name" for the device that can be anything. The name
# is referenced later in the Subsystem section.
#
# Alternatively, the user can specify ClaimAllDevices. All
# NVMe devices will be claimed and named Nvme0, Nvme1, etc.
# BDF 0000:00:00.0 Nvme0
 BDF 0000:0a:00.0 Nvme3

Hi Kiran,

The format of the NVMe section changed in the last SPDK release, so that we could add support for remote NVMe-oF devices as well.

Can you try the following instead?

[Nvme]
 TransportID “trtype:PCIe traddr:0000.0a:00.0” Nvme3

The comment for spdk_nvme_transport_id_parse() in include/spdk/nvme.h describes the format in more detail, including how to specify NVMe-oF targets.

Thanks,

-Jim



[TargetNode1]
 TargetName disk2
 TargetAlias "Data Disk2"
 Mapping PortalGroup1 InitiatorGroup1
 AuthMethod Auto
 AuthGroup AuthGroup1
 UseDigest Auto
 LUN0 Nvme3
 QueueDepth 64


Thank you
Kiran
_______________________________________________
SPDK mailing list
SPDK(a)lists.01.org<mailto:SPDK(a)lists.01.org>
https://lists.01.org/mailman/listinfo/spdk

_______________________________________________
SPDK mailing list
SPDK(a)lists.01.org<mailto:SPDK(a)lists.01.org>
https://lists.01.org/mailman/listinfo/spdk



[-- Attachment #2: attachment.html --]
[-- Type: text/html, Size: 63638 bytes --]