On May 24, 2017, at 4:10 AM, Kiran Dikshit <kdikshit@cloudsimple.com>
wrote:
Hi All,
I am trying to configure iSCSI for a NVMe drive and getting the below error’s. I have unbound the NVMe drive
from kernel using the setup.sh.
tgt_node.c:
718:spdk_iscsi_tgt_node_construct: ***ERROR*** Could not construct SCSI device
tgt_node.c:
984:spdk_cf_add_iscsi_tgt_node: ***ERROR*** tgt_node1: add_iscsi_target_node error
tgt_node.c:1010:spdk_iscsi_init_tgt_nodes: ***ERROR*** spdk_cf_add_iscsi_tgt_node() failed
iscsi_subsystem.c: 965:spdk_iscsi_subsystem_init: ***ERROR*** spdk_iscsi_init_tgt_nodes() failed
app.c: 404:spdk_app_init: ***ERROR*** spdk_subsystem_init() failed
Below is the section of my iscsi.conf.in file for reference.
# NVMe configuration options
[Nvme]
# NVMe Device Whitelist
# Users may specify which NVMe devices to claim by their PCI
# domain, bus, device, and function. The format is dddd:bb:dd.f, which is
# the same format displayed by lspci or in /sys/bus/pci/devices.
The second
# argument is a "name" for the device that can be anything. The name
# is referenced later in the Subsystem section.
#
# Alternatively, the user can specify ClaimAllDevices. All
# NVMe devices will be claimed and named Nvme0, Nvme1, etc.
# BDF 0000:00:00.0 Nvme0
BDF 0000:0a:00.0 Nvme3