Hi Khem,


>do you have x11 in DISTRO_FEATURES

No, the DISTRO_FEATURES variable was not even declared in the default local.conf

Karim

________________________________
De : Khem Raj <raj.khem@gmail.com>
Envoyé : lundi 26 septembre 2016 09:28
À : Karim ATIKI
Cc : yocto
Objet : Re: [yocto] [meta-toraxdex] unrecoverable build error

On Sat, Sep 24, 2016 at 11:10 PM, Karim ATIKI <karim_atiki@hotmail.com> wrote:
> hi,
>
>
> During a core-image-x11  build   (yocto krogoth, meta-toradex) , I got the
> following error I never encountered with Yocto:
>
>
> ERROR: xf86-input-evdev-2_2.10.1-r0 do_populate_sysroot: The recipe
> xf86-input-evdev is trying to install files into a shared area when those
> files already exist. Those files and their manifest location are:
>
> /home/kai/yocto/colibri-t20-kts/tmp/sysroots/colibri-t20/usr/share/X11/xorg.conf.d/10-evdev.conf
>  Matched in manifest-colibri-t20-xserver-xorg.populate_sysroot
> Please verify which recipe should provide the above files.
> The build has stopped as continuing in this scenario WILL break things, if
> not now, possibly in the future (we've seen builds fail several months
> later). If the system knew how to recover from this automatically it would
> however there are several different scenarios which can result in this and
> we don't know which one this is. It may be you have switched providers of
> something like virtual/kernel (e.g. from linux-yocto to linux-yocto-dev), in
> that case you need to execute the clean task for both recipes and it will
> resolve this error. It may be you changed DISTRO_FEATURES from systemd to
> udev or vice versa. Cleaning those recipes should again resolve this error
> however switching DISTRO_FEATURES on an existing build directory is not
> supported, you should really clean out tmp and rebuild (reusing sstate
> should be safe). It could be the overlapping files detected are harmless in
> which case adding them to SSTATE_DUPWHITELIST may be the correct solution.
> It could also be your build is including two different conflicting versions
> of things (e.g. bluez 4 and bluez 5 and the correct solution for that would
> be to resolve the conflict. If in doubt, please ask on the mailing list,
> sharing the error and filelist above.
> ERROR: xf86-input-evdev-2_2.10.1-r0 do_populate_sysroot: If the above
> message is too much, the simpler version is you're advised to wipe out tmp
> and rebuild (reusing sstate is fine). That will likely fix things in most
> (but not all) cases.
> ERROR: xf86-input-evdev-2_2.10.1-r0 do_populate_sysroot: Function failed:
> sstate_task_postfunc
> ERROR: Logfile of failure stored in:
> /home/kai/yocto/colibri-t20-kts/tmp/work/armv7ahf-vfp-poky-linux-gnueabi/xf86-input-evdev/2_2.10.1-r0/temp/log.do_populate_sysroot.639
> ERROR: Task 2181
> (/home/kai/yocto/poky-toradex/meta/recipes-graphics/xorg-driver/xf86-input-evdev_2.10.1.bb,
> do_populate_sysroot) failed with exit code '1'
>
>
> I cant' get rid of this error. I have deleted the tmp and
> sstate-cache...nothing. it always occurs again.
>
>
> Any idea?



>
>
> Z.
>
>
> --
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
yocto -- Discussion of all things Yocto Project<https://lists.yoctoproject.org/listinfo/yocto>
lists.yoctoproject.org
Discussion of all things about the Yocto Project. Read our Community Guidelines or learn more about how to participate in other community discussions.



>