Re: [PATCH v5 0/7] Introduce DPAA2 Command Interface raw driver

[Nipun Gupta <nipun.gupta@nxp.com>]

There is an intermediate patch compilation break. Will fix this and resend.
Apologies for this and I will take care of this from next time.

Thanks,
Nipun

> -----Original Message-----
> From: Nipun Gupta
> Sent: Thursday, May 3, 2018 10:04 PM
> To: thomas@monjalon.net; Hemant Agrawal <hemant.agrawal@nxp.com>;
> Shreyansh Jain <shreyansh.jain@nxp.com>
> Cc: dev@dpdk.org; Nipun Gupta <nipun.gupta@nxp.com>
> Subject: [PATCH v5 0/7] Introduce DPAA2 Command Interface raw driver
> 
> This patch set introduces DPAA2 based Command Interface
> device driver.
> 
> This driver is provides communication between the GPP and
> AIOP Firmware.
> 
> This patchset is based on top of:
> https://dpdk.org/dev/patchwork/patch/39246/
> 
> Patches 1-3:
>   Makes necessary changes and fixes in the DPAA2 bus and
>   mempool region
> Patches 4-6:
>   Add the DPAA2 CMDIF driver
> Patches 7:
>   Update the respective documentation
> 
> Changes in v2:
>   - Move CMDIF compilation to common_linuxapp
>   - Support physical addressing mode
> 
> Changes in v3:
>   - Rebased over DPAA2 QDMA patches
>   - Updated logging adding Data Path logs too
>   - Fix up error handling in patch 3
>   - Merged the two separate doc patches (patch 7)
> 
> Changes in v4:
>   - Added meson build support
> 
> Changes in v5:
>   - Fixed shared build for x86
> 
> Nipun Gupta (7):
>   mempool/dpaa2: add functions exposed to DPDK applications
>   bus/fslmc: expose API to free dpci device
>   bus/fslmc: keep Tx queues information for DPCI devices too
>   raw/dpaa2_cmdif: introduce DPAA2 command interface driver
>   raw/dpaa2_cmdif: add attribute get functionality
>   raw/dpaa2_cmdif: support enqueue dequeue operations
>   doc: add DPAA2 CMDIF rawdev guide
> 
>  MAINTAINERS                                        |   5 +
>  config/common_base                                 |   5 +
>  config/common_linuxapp                             |   1 +
>  doc/api/doxy-api-index.md                          |   2 +
>  doc/api/doxy-api.conf                              |   2 +
>  doc/guides/rawdevs/dpaa2_cmdif.rst                 | 144 ++++++++++
>  doc/guides/rawdevs/index.rst                       |   1 +
>  doc/guides/rel_notes/release_18_05.rst             |  11 +
>  drivers/bus/fslmc/portal/dpaa2_hw_dpci.c           |  86 ++++--
>  drivers/bus/fslmc/portal/dpaa2_hw_pvt.h            |   3 +-
>  drivers/bus/fslmc/rte_bus_fslmc_version.map        |   1 +
>  drivers/event/dpaa2/dpaa2_eventdev.c               |  10 +-
>  drivers/mempool/dpaa2/Makefile                     |   2 +
>  drivers/mempool/dpaa2/dpaa2_hw_mempool.c           |  30 +++
>  drivers/mempool/dpaa2/rte_dpaa2_mempool.h          |  53 ++++
>  .../mempool/dpaa2/rte_mempool_dpaa2_version.map    |   8 +
>  drivers/raw/Makefile                               |   1 +
>  drivers/raw/dpaa2_cmdif/Makefile                   |  36 +++
>  drivers/raw/dpaa2_cmdif/dpaa2_cmdif.c              | 300
> +++++++++++++++++++++
>  drivers/raw/dpaa2_cmdif/dpaa2_cmdif_logs.h         |  46 ++++
>  drivers/raw/dpaa2_cmdif/meson.build                |   9 +
>  drivers/raw/dpaa2_cmdif/rte_pmd_dpaa2_cmdif.h      |  35 +++
>  .../dpaa2_cmdif/rte_pmd_dpaa2_cmdif_version.map    |   4 +
>  drivers/raw/meson.build                            |   2 +-
>  mk/rte.app.mk                                      |   1 +
>  25 files changed, 768 insertions(+), 30 deletions(-)
>  create mode 100644 doc/guides/rawdevs/dpaa2_cmdif.rst
>  create mode 100644 drivers/mempool/dpaa2/rte_dpaa2_mempool.h
>  create mode 100644 drivers/raw/dpaa2_cmdif/Makefile
>  create mode 100644 drivers/raw/dpaa2_cmdif/dpaa2_cmdif.c
>  create mode 100644 drivers/raw/dpaa2_cmdif/dpaa2_cmdif_logs.h
>  create mode 100644 drivers/raw/dpaa2_cmdif/meson.build
>  create mode 100644 drivers/raw/dpaa2_cmdif/rte_pmd_dpaa2_cmdif.h
>  create mode 100644
> drivers/raw/dpaa2_cmdif/rte_pmd_dpaa2_cmdif_version.map
> 
> --
> 1.9.1