From mboxrd@z Thu Jan 1 00:00:00 1970 From: Z.q. Hou Date: Mon, 15 Jun 2020 08:56:14 +0000 Subject: [PATCHv3 03/15] net: tsec: convert to use DM_MDIO when DM_ETH enabled In-Reply-To: References: <20200612151735.49048-1-Zhiqiang.Hou@nxp.com> <20200612151735.49048-4-Zhiqiang.Hou@nxp.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Vladimir, Thanks a lot for your comments! > -----Original Message----- > From: Vladimir Oltean [mailto:olteanv at gmail.com] > Sent: 2020?6?13? 4:31 > To: Z.q. Hou > Cc: u-boot ; Priyanka Jain ; > Bin Meng ; Vladimir Oltean > > Subject: Re: [PATCHv3 03/15] net: tsec: convert to use DM_MDIO when > DM_ETH enabled > > On Fri, 12 Jun 2020 at 18:23, Zhiqiang Hou wrote: > > > > From: Hou Zhiqiang > > > > For the platforms on which the eTSEC driver uses DM_ETH, convert its > > MDIO controller code to also use DM_MDIO. > > > > Note that for handling the TBI PHY (the MAC PCS for SGMII), we still > > don't register a udevice for it, since we can drive it locally and > > there is no point in doing otherwise. > > > > Signed-off-by: Vladimir Oltean > > Signed-off-by: Hou Zhiqiang > > --- > > V3: > > - Draw from the tsec.c part of the Vladimir's patch below and do some > > slightly tweaking: > > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc > > > hwork.ozlabs.org%2Fproject%2Fuboot%2Fpatch%2F20200503185227.28731- > 4-ol > > > teanv%40gmail.com%2F&data=02%7C01%7CZhiqiang.Hou%40nxp.com > %7Ce4ec9 > > > e0d5ef84ddf730408d80f0f9963%7C686ea1d3bc2b4c6fa92cd99c5c301635%7 > C0%7C0 > > %7C637275906955031325&sdata=muGA37v8K5glLrZJD2u63%2FFSmJ > eNeRVCX8u% > > 2F400xgQA%3D&reserved=0 > > > > drivers/net/tsec.c | 46 > > +++++++++++++--------------------------------- > > 1 file changed, 13 insertions(+), 33 deletions(-) > > > > diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index > > 3d75acb6b4..cb3e56d439 100644 > > --- a/drivers/net/tsec.c > > +++ b/drivers/net/tsec.c > > @@ -18,6 +18,7 @@ > > #include > > #include > > #include > > +#include > > #include > > #include > > > > @@ -681,8 +682,15 @@ static int init_phy(struct tsec_private *priv) > > if (priv->interface == PHY_INTERFACE_MODE_SGMII) > > tsec_configure_serdes(priv); > > > > +#ifdef CONFIG_DM_ETH > > + if (ofnode_valid(ofnode_find_subnode(priv->dev->node, > "fixed-link"))) > > + phydev = phy_connect(NULL, 0, priv->dev, > priv->interface); > > + else > > + phydev = dm_eth_phy_connect(priv->dev); #else > > You said it's better to split the fixed-link functionality into a separate patch, > but then you didn't :) Oops, I had amnesia? It will be split in next version. Thanks, Zhiqiang > > > phydev = phy_connect(priv->bus, priv->phyaddr, priv->dev, > > priv->interface); > > +#endif > > if (!phydev) > > return 0; > > > > @@ -787,14 +795,17 @@ int tsec_standard_init(bd_t *bis) > > return tsec_eth_init(bis, tsec_info, ARRAY_SIZE(tsec_info)); > > } #else /* CONFIG_DM_ETH */ > > + > > +#ifndef CONFIG_DM_MDIO > > +#error "TSEC with DM_ETH also requires DM_MDIO" > > +#endif > > + > > int tsec_probe(struct udevice *dev) > > { > > struct eth_pdata *pdata = dev_get_platdata(dev); > > struct tsec_private *priv = dev_get_priv(dev); > > - struct tsec_mii_mng __iomem *ext_phyregs_mii; > > struct ofnode_phandle_args phandle_args; > > u32 tbiaddr = CONFIG_SYS_TBIPA_VALUE; > > - struct fsl_pq_mdio_info mdio_info; > > const char *phy_mode; > > fdt_addr_t reg; > > ofnode parent; > > @@ -803,31 +814,6 @@ int tsec_probe(struct udevice *dev) > > pdata->iobase = (phys_addr_t)dev_read_addr(dev); > > priv->regs = dev_remap_addr(dev); > > > > - if (dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0, > > - &phandle_args)) { > > - printf("phy-handle does not exist under tsec %s\n", > dev->name); > > - return -ENOENT; > > - } else { > > - int reg = ofnode_read_u32_default(phandle_args.node, > "reg", 0); > > - > > - priv->phyaddr = reg; > > - } > > - > > - parent = ofnode_get_parent(phandle_args.node); > > - if (!ofnode_valid(parent)) { > > - printf("No parent node for PHY?\n"); > > - return -ENOENT; > > - } > > - > > - reg = ofnode_get_addr_index(parent, 0); > > - if (reg == FDT_ADDR_T_NONE) { > > - printf("No 'reg' property of MII for external PHY\n"); > > - return -ENOENT; > > - } > > - > > - ext_phyregs_mii = map_physmem(reg + > TSEC_MDIO_REGS_OFFSET, 0, > > - MAP_NOCACHE); > > - > > ret = dev_read_phandle_with_args(dev, "tbi-handle", NULL, 0, 0, > > &phandle_args); > > if (ret == 0) { > > @@ -865,12 +851,6 @@ int tsec_probe(struct udevice *dev) > > if (priv->interface == PHY_INTERFACE_MODE_SGMII) > > priv->flags |= TSEC_SGMII; > > > > - mdio_info.regs = ext_phyregs_mii; > > - mdio_info.name = (char *)dev->name; > > - ret = fsl_pq_mdio_init(NULL, &mdio_info); > > - if (ret) > > - return ret; > > - > > /* Reset the MAC */ > > setbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET); > > udelay(2); /* Soft Reset must be asserted for 3 TX clocks */ > > -- > > 2.25.1 > >