From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shengjiu Wang Subject: Re: [PATCH] pcm: Don't store the state for SND_PCM_STATE_SUSPENDED Date: Tue, 31 May 2016 07:30:49 +0000 Message-ID: References: <1462866346-11878-1-git-send-email-shengjiu.wang@freescale.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from emea01-am1-obe.outbound.protection.outlook.com (mail-am1on0094.outbound.protection.outlook.com [157.56.112.94]) by alsa0.perex.cz (Postfix) with ESMTP id 9B2802651D5 for ; Tue, 31 May 2016 09:30:50 +0200 (CEST) In-Reply-To: Content-Language: en-US List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Takashi Iwai Cc: "alsa-devel@alsa-project.org" List-Id: alsa-devel@alsa-project.org Hi > On Tue, 24 May 2016 12:12:49 +0200, > Shengjiu Wang wrote: > > > > Hi > > > > > -----Original Message----- > > > From: Takashi Iwai [mailto:tiwai@suse.de] > > > Sent: Friday, May 20, 2016 10:32 PM > > > To: Shengjiu Wang > > > Cc: perex@perex.cz; alsa-devel@alsa-project.org > > > Subject: Re: [PATCH] pcm: Don't store the state for > > > SND_PCM_STATE_SUSPENDED > > > > > > On Fri, 20 May 2016 12:46:37 +0200, > > > Takashi Iwai wrote: > > > > > > > > On Fri, 20 May 2016 11:41:25 +0200, > > > > Shengjiu Wang wrote: > > > > > > > > > > Hi Takashi > > > > > > > > > > I tested your patch, after suspend and resume, the playback > is > > > stopped. > > > > > It is caused by the DMA. DMA is not started after resume. > > > > > > > > > > With your patch, DMA is not terminated but then is re-started. > The > > > driver don't > > > > > support this behavior. > > > > > > > > If so, it's simply a driver bug. Blame the kernel driver instead. > > > > > > Which driver did you see the problem? We should fix it. > > > > But my thought is when suspended, the dmaengine_pause() is called, > then > > dmaengine_resume() should be called in resume(). If there is no > resume() > > Just call the prepare() and start(), it seems not reasonable. What do > > you think? > > There are several ways to fix the problem, but the point is that, from > the API POV, the direct state change from SUSPENDED to PREPARED is > valid. So, the kernel driver has to support such a state change, no > matter how. > > An easier way would be to add a check and some trigger in PCM core > side. OTOH, this would affect effectively all drivers, thus we'd need > a wider test coverage, too. > > Judging from your comment, the broken driver is ASoC one, right? > No, the driver is in dma folder, path is /drivers/dma/. We use the /drivers/dma/imx-sdma.c But the driver in community is old. We have updated the dma driver to support virtual-dma, just like the drivers/dma/omap-dma.c. The c->desc should be released in terminate_all() function, if it not Released, the issue_pending() will not go to start dma. I can't find a good way to fix this issue in dma driver. > > Takashi