[U-Boot-Users] (no subject)

[U-Boot-Users] (no subject)

[C Doyle]

Hello all,
Ive been trying to compile u-boot0.4 for the mpc8266ads board. I am using 
the hardhat ppc-cross compiler and am coming across problems with the 
compilation. First of all make fails at a bootp error which can be fixed by 
placing parenthesis around the #define. It next fails in the examples folder 
where I think it is trying the hello_world.bin & others and this can be 
fixed by doing a chmod on each of the examples it fails on. Just wondering 
if anyone is coming across the same problems and if any official fixes are 
available for this? After I change these the project compiles ok.
Cheers

_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE* 
http://join.msn.com/?page=features/virus

[U-Boot-Users] (no subject)

[Allen Curtis]

I proposed a patch a while ago that addressed this issue. There is a bug 
and undocumented feature in the Hardhat objdump program. It can not convert 
between .bin and .srec. However there is a ppcboot option to their utility 
that works.


>Ive been trying to compile u-boot0.4 for the mpc8266ads board. I am using 
>the hardhat ppc-cross compiler and am coming across problems with the 
>compilation. First of all make fails at a bootp error which can be fixed 
>by placing parenthesis around the #define. It next fails in the examples 
>folder where I think it is trying the hello_world.bin & others and this 
>can be fixed by doing a chmod on each of the examples it fails on. Just 
>wondering if anyone is coming across the same problems and if any official 
>fixes are available for this? After I change these the project compiles ok.
>Cheers

[U-Boot-Users] (no subject)

[Jon Loeliger]

On Sun, 2008-07-06 at 10:11 +0300, David Saada wrote:

> Kumar,
> 
> Does this RFC also include support for identifying and initializing
> more than one DDR module?
> 
> David.

Yes, it should.

jdl

[U-Boot-Users] (no subject)

[David Saada]

Kumar Gala-3 wrote:
>
> This is a series of patches that are a work-in-progress towards a new
> DDR initialization for the Freescale 8{3,5,6}xxx devices that have a
> common DDR controller.
>

Kumar,
Does this RFC also include support for identifying and initializing more than one DDR module?
David.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080706/d8ed9bda/attachment.htm 

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[Shreeram]

Hi

I am using a MPC8349 based board. I have ported the U-boot-1.3.2. When i
transfer some files using the TFTP command the board hangs. Please find
the attached console output. However if i enable ET_DEBUG its getting
through and also tftp transfer is successful from the kernel. Are there
any fixes available for TSEC.








Regards,
R.S.Shree Ram
GDA Technologies,
L&T infotech Park,
Mt.Ponamalle Road,
Manapakkam,
Chennai-600089

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: tftphang.txt
Url: http://lists.denx.de/pipermail/u-boot/attachments/20080702/52b37c46/attachment.txt 

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[Andrejs Cainikovs]

Please, someone, block this spammer.


Translation: Chinese ? English

Members chiefs: you!
Cheng Chu: you, in 2008; mice not have the joy! Not the harvest mouse!
Rats not money!
Rat endless happiness! The mice not happy life! To: your family fun!
Happiness and good health!
My company can provide long-term: export declarations, to write off
alone, and so on a series of formalities; Agent: exports
Customs declaration, commodity inspection, inside and outside the
transport ...... etc. can also charge d'affaires: permit exports to the
EU, the EU certificate;
And there (Guangzhou International Trade Fair) booth may be transferred;
prices special offers; Interested parties invited to e-mail
Or call contact. Thank you for your cooperation!


Kind regards,
Andrejs Cainikovs.



??? wrote:
> ?????????
>                 
>     ??????2008?????????????????????????
> ?
> ?????????????????? ????????????
>     
>     ?????????????????????????????????
>
> ???????????......???????????????????????
>
> ?????????????????????????????????????
>
> ???????????
> ?
>                               ???0755-81153047?
> ?
>                               ???0755-81172940?
> ?
>                               ???15817477278?
> ?
>                               ????????
> ?
>    
>                               ????:shanhu.dao at 163.com  
>
>
> ???
>                                                          
>
>                                                                 ???
>
>   
> ------------------------------------------------------------------------
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> ------------------------------------------------------------------------
>
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>   

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   
                              ????:shanhu.dao at 163.com  


???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

???????????/???????
    
    ?????2008????????????????????????? 
?
?????????????????? ????????????
    
    ??????????????????????????????

?????????????????????????????????

????????????????????????????????

?????????????????????????????????

????????????????????????????????????

                    ???0755-81153047?
?
                    ???0755-81172940?
?
                    ???15817477278?
?
                    ????????
?
                    ?????shenzhenshanhudao at 126.com 

                    ?????http://541012091.qzone.qq.c

           ???
                                                           ???



                        ?  ?  ?  ?  ?  ?

[U-Boot-Users] (no subject)

[钟文辉]

???????????/???????
    
    ?????2008????????????????????????? 
?
?????????????????? ????????????
    
    ??????????????????????????????

?????????????????????????????????

????????????????????????????????

?????????????????????????????????

????????????????????????????????????

                    ???0755-81153047?
?
                    ???0755-81172940?
?
                    ???15817477278?
?
                    ????????
?
                    ?????shenzhenshanhudao at 126.com 

                    ?????http://541012091.qzone.qq.c

           ???
                                                           ???



                        ?  ?  ? ? ?  ?

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   ???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

?????????
                
    ??????2008?????????????????????????
?
?????????????????? ????????????
    
    ?????????????????????????????????

???????????......???????????????????????

?????????????????????????????????????

???????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
   ???
                                                         

                                                                ???

[U-Boot-Users] (no subject)

[钟文辉]

         ?????????
                
             ??????2008?????????????????????????
?
         ?????????????????? ????????????
    
             ?????????????????????????????????
?
         ???????????????????????????......?????

         ???????????????????????????????????

         ????????????????????????
?
                              ???0755-81153047?
?
                              ???0755-81172940?
?
                              ???15817477278?
?
                              ????????
?
             

                 ???
                                                                         

                                                                  ???

[U-Boot-Users] (no subject)

[钟文辉]

             ?????????
                
                 ??????2008?????????????????????????
?
             ??????????????????????????????
    
                 ?????????????????????????????????
?
            ???????????????????????????......?????

            ???????????????????????????????????

            ???????????????????
?
                                          ???0755-81153047?
?
                                          ???0755-81172940?
?
                                          ???15817477278?
?
                                          ????????
?
                        ???
                                                                       

                                                                         ???

[U-Boot-Users] (no subject)

[钟文辉]

             ?????????
                
                 ??????2008?????????????????????????
?
             ??????????????????????????????
    
                 ?????????????????????????????????
?
            ???????????????????????????......?????

            ???????????????????????????????????

            ???????????????????
?
                                          ???0755-81153047?
?
                                          ???0755-81172940?
?
                                          ???15817477278?
?
                                          ????????
?
                        ???
                                                                       

                                                                         ???

[U-Boot-Users] (no subject)

[Wolfgang Denk]

Note: this commit breaks booting on trab.h

commit 80767a6cead9990d9e77e62be947843c2c72f469
Author: Peter Pearse <peter.pearse@arm.com>
Date:   Wed Sep 5 16:04:41 2007 +0100

    Changed API name to coloured_led.h
    Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
    Tidied other cpu/arm920t/start.S code

Harald, did you run any later revision successfully on a SMDK2400
board?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"You can have my Unix system when you  pry  it  from  my  cold,  dead
fingers."                                                - Cal Keegan

[U-Boot-Users] (no subject)

[钟文辉]

                 


               ?????????
                
                   ??????2008????????????????????????? 
?
               ??????????????????????????????
    
                   ?????????????????????????????????
?
               ???????????????????????????......?????

               ???????????????????????????????????

               ???????????????????
?
                                             ???0755-81153047?
?
                                             ???0755-81172940?
?
                                             ???15817477278?
?
                                             ????????
?
                         ???
                                                                 

                                                                          ???
?

[U-Boot-Users] (no subject)

[钟文辉]

               ?????????
                
                   ??????2008?????????????????????????
?
               ?????????????????? ????????????
    
                   ?????????????????????????????????
?
               ???????????????????????????......??? 
               
               ???????????????????????????????????

               ?????????????????????
?
                                                 ???0755-81153047?
?
                                                 ???0755-81172940?
?
                                                 ???15817477278?
?
                                                 ????????
?
                     


                  ???
                                                                           ???
?

[U-Boot-Users] (no subject)

[Stefan Roese]

On Friday 29 February 2008, Maupin, Chase wrote:
> > implementation.  Is this
> > > problem in the 1.2.0 version of u-boot?
> >
> > No, I don't think so. This thread was related to problem with the
> > rewrite of the U-Boot NAND subsystem. The current implementation
> > should handle writing images (YAFFS, JFFS2) just fine. Please make
> > sure that you use the ".jffs2"
> > extension.
>
> I wrote the image by doing (my file system partition is at offset
> 0x460000 and my jffs2 image size is 0x288000 downloaded to 0x80700000):
> 	# nand erase 0x460000 0x288000
> 	# nand write.jffs2 0x80700000 0x460000 0x288000
>
> I can successfully write this same image from a booted Linux system
> using the "nandwrite" command.

Perhaps its a problem of the U-Boot NAND driver for your platform. Is this 
board/platform supported in the official U-Boot version? What platform are 
you using btw? And are using software or hardware ECC generation in the NAND 
driver?

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

[U-Boot-Users] (no subject)

[Maupin, Chase]

> 
> On Friday 29 February 2008, Maupin, Chase wrote:
> > I'm a little confused here.  I have been trying to write a
> jffs2 image
> > to NAND flash using u-boot 1.2.0 but when I do so I cannot
> mount the
> > file system when booting the kernel.
> 
> What error messages do you get?

I see is ECC errors for every read such as the following.
mtd->read(0x400 bytes from 0x0) returned ECC error read(0x7c3c bytes 
mtd->from 0x3c4) returned ECC error

I also noticed a bunch of magic bitmask erros such as the following.
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0007861c:
0x0162 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00078620:
0x61c8 instead

> 
> > It looks from your e-mail thread
> > that there is a problem with the write.jffs2
> implementation.  Is this
> > problem in the 1.2.0 version of u-boot?
> 
> No, I don't think so. This thread was related to problem with the 
> rewrite of the U-Boot NAND subsystem. The current implementation 
> should handle writing images (YAFFS, JFFS2) just fine. Please make 
> sure that you use the ".jffs2"
> extension.

I wrote the image by doing (my file system partition is at offset
0x460000 and my jffs2 image size is 0x288000 downloaded to 0x80700000):
	# nand erase 0x460000 0x288000
	# nand write.jffs2 0x80700000 0x460000 0x288000

I can successfully write this same image from a booted Linux system
using the "nandwrite" command.

> 
> > Do you know if there is a fix
> > for this?
> >
> > Please let me know if you have more information.
> 
> It would be much better, if you wrote to the mailing list too. This 
> way many people could try to help out here. So I suggest to send you 
> question again to the list.

I am including the list here.  Any help someone can give on writing a
JFFS2 image into NAND Flash would be greatly appreciated.

> 
> Thanks.
> 
> Best regards,
> Stefan
> 
> =====================================================================
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: 
> office at denx.de
> =====================================================================
> 

[U-Boot-Users] (no subject)

[刁卓]

reject
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080216/ba567ecf/attachment.htm 

[U-Boot-Users] (no subject)

[Исаев Ислам]

[U-Boot-Users] (no subject)

[Tien ChenLi]

No, at least in official U-Boot tree.

Chen-Li Tien

On 06/08/2007, Yotam Admon <yotam@marvell.com> wrote:
>
>
> Hi,
> I am trying to find EHCI drivers for U-boot, does any one know of a
> board supporting EHCI in U-boot?
>
> Thanks,
> Yotam
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems?  Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >>  http://get.splunk.com/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>

[U-Boot-Users] (no subject)

[keng_629]

us
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20071128/25715877/attachment.htm 

[U-Boot-Users] (no subject)

[gvb.uboot]

Mazhar Umer wrote:
> Hi,
> 
> I am working on GENE-8610 Celeron-M board. Request all of you to send me
> steps to be followed to get the support of u-boot for this board,
> 
> Thanks,
> 
> Maz

Hi Maz,

Three answers, none very satisfactory:

1) http://www.catb.org/~esr/faqs/smart-questions.html

2) Support for the x86 architecture is not very active in u-boot so I 
don't know how much help you will get from fellow sufferers.  :-/

3) Read the README in the top level u-boot directory, especially...

"Testing of U-Boot Modifications, Ports to New Hardware, etc.:"
<http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=blob;f=README;h=3dad5fc726f76e72eaa797a31370cca8348e03b3;hb=HEAD#l2476>

"U-Boot Porting Guide:"
<http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=blob;f=README;h=3dad5fc726f76e72eaa797a31370cca8348e03b3;hb=HEAD#l3592>

Best regards,
gvb

[U-Boot-Users] (no subject)

[Mazhar Umer]

Hi,

I am working on GENE-8610 Celeron-M board. Request all of you to send me
steps to be followed to get the support of u-boot for this board,

Thanks,

Maz

[U-Boot-Users] (no subject)

[Pugh S. Terry]

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20071113/9137fbe3/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Journal.pdf
Type: application/pdf
Size: 25621 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20071113/9137fbe3/attachment.pdf 

[U-Boot-Users] (no subject)

[DI BACCO ANTONIO - technolabs]

mw.w f0000970 0001
mw.w f0000976 0401
 
 
 
 
protect off F8000000 F803FFFF
run dl_boot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20071011/2eafcd4e/attachment.htm 

[U-Boot-Users] (no subject)

[briano manoj]

Special internet pricing!

* Cheap erection packs
* Men`s Health
* Anti-depressants
* Weight Loss
* Women`s Health
* Anti-diabetics
* Blood Pressure/Cholesterol
* Anti-Allergic/Asthma preparations
* Anti Intragastric Acidity

We ship WorldWide directly to your home!
No Doctor visit,prescription is not required.
Worm out at once!!!
http://medscit.com  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070926/9b0dfcd0/attachment.htm 

[U-Boot-Users] (no subject)

[杨进忠]

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070921/c1af32ba/attachment.htm 

[U-Boot-Users] (no subject)

[杨进忠]

_________________________________________________________________
? Live Search ???????
http://www.live.com/?searchOnly=true
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070921/10394d3b/attachment.htm 

[U-Boot-Users] (no subject)

[gb sudeep]

hi,

email gbsudeep at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070911/86bec566/attachment.htm 

[U-Boot-Users] (no subject)

[couture mamn]

Cash flow
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070821/f9575a7f/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Analyst_Coverage.pdf
Type: application/octet-stream
Size: 16515 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20070821/f9575a7f/attachment.obj 

[U-Boot-Users] (no subject)

[Jas Pramov]

Portfolio updates
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070821/26e0f302/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Income report.pdf
Type: application/octet-stream
Size: 12027 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20070821/26e0f302/attachment.obj 

[U-Boot-Users] (no subject)

[Neuhaus]

-------------- next part --------------
A non-text attachment was scrubbed...
Name: post.pdf
Type: application/octet-stream
Size: 16986 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20070821/27b91086/attachment.obj 

[U-Boot-Users] (no subject)

[Peninsula]

John Warner Armed Services

News Latest Current We Report.

BombsBy Roger Kidmans movie The bombs dubbed tax

eight years President Does God care about name Morris Imam Shamsi Ali

Special Senators Praise Surge brief

Material leaving label next two albums possible going really just who

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070820/0215d751/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 4977 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20070820/0215d751/attachment.gif 

[U-Boot-Users] (no subject)

[Ludia Chirnside]

http://finance.yahoo.com/q?s=EXMT.PK 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070820/e7c1904f/attachment.htm 

[U-Boot-Users] (no subject)

[Kimberle Iliev]

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070820/ad898e38/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: abuse.pdf
Type: application/octet-stream
Size: 14193 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20070820/ad898e38/attachment.obj 

[U-Boot-Users] (no subject)

[notices]

varicosis Swift assisted Z. A. healing animals humans Greulich damages

suggests calls market. radically declare humanity

Although

CHARTS Monthly

caused probably scattered formed operate. excellent evident Guy defensive offensive concluded provided greatest field:

derived classical green feminist South. caused probably

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070819/1bc639d1/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 4979 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20070819/1bc639d1/attachment.gif 

[U-Boot-Users] (no subject)

[Blanch L. Rosario]

-------------- next part --------------
A non-text attachment was scrubbed...
Name: Magazine.pdf
Type: application/pdf
Size: 14902 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20070818/f87da25f/attachment.pdf 

[U-Boot-Users] (no subject)

[ventasruggeri at doc.state.or.us]

-------------- next part --------------
A non-text attachment was scrubbed...
Name: bill.pdf
Type: application/pdf
Size: 14431 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20070813/7a47fc4c/attachment.pdf 

[U-Boot-Users] (no subject)

[Xu Mao]

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070811/cb3d5f07/attachment.htm 

[U-Boot-Users] (no subject)

[Xu Mao]

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070811/90ee3944/attachment.htm 

[U-Boot-Users] (no subject)

[Mychal sd]

B,U,L,L MARKET R_E_PORT!!!
Insider B_u_ying A-l-e-r-t!!!

Tr Date: Friday, Aug 10, 2007
Com: P-R-I_M_E T.I.M.E GROUP INC
Symbol: (P)(R)(T)(H)
Cur Pr: $0.105
Thur Close: Gain (19.32%)
Recomm: S!trong B.u.y/H.o.l.d

DO YOU LOVE T_R-A-D-I-N_G P*ENNY S,T.O,C.K,S?
[P][R][T][H] WILL MOVE LIKE A COMET AND ITS
ONLY GOING TO GET BETTER!
Wat ch this S-U.P-E.RNOVA closely FRIDAY!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070810/b66264b0/attachment.htm 

[U-Boot-Users] (no subject)

[Tiffany Lemaire]

B,U,L,L MARKET R_E_PORT!!!
Insider B_u_ying A-l-e-r-t!!!

Tr Date: Friday, Aug 10, 2007
Com: P-R-I_M_E T.I.M.E GROUP INC
Symbol: (P)(R)(T)(H)
Cur Pr: $0.105
Thur Close: Gain (19.32%)
Recomm: S!trong B.u.y/H.o.l.d

DO YOU LOVE T_R-A-D-I-N_G P*ENNY S,T.O,C.K,S?
[P][R][T][H] WILL MOVE LIKE A COMET AND ITS
ONLY GOING TO GET BETTER!
Wat ch this S-U.P-E.RNOVA closely FRIDAY!

[U-Boot-Users] (no subject)

[Turner Paddy]

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070807/e215f65e/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: log.pdf
Type: application/pdf
Size: 15927 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20070807/e215f65e/attachment.pdf 

[U-Boot-Users] (no subject)

[Yotam Admon]

Hi,
I am trying to find EHCI drivers for U-boot, does any one know of a
board supporting EHCI in U-boot?

Thanks,
Yotam
 

[U-Boot-Users] (no subject)

[sun]

thanks,Mr. Dyer
      I got it where's EXPORT_FUNC(x) defined,but I am not sure what  the func. jumptable_init() does in U-Boot
   
   
   
          Best regards!
          sun 

       
---------------------------------
????????3.5G???20M??? 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070730/7984e85c/attachment.htm 

[U-Boot-Users] (no subject)

[Brady D. Maggie]

-------------- next part --------------
A non-text attachment was scrubbed...
Name: warning.pdf
Type: application/pdf
Size: 19349 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20070728/ce05c01c/attachment.pdf 

[U-Boot-Users] (no subject)

[Simeon T. Calderon]

-------------- next part --------------
A non-text attachment was scrubbed...
Name: publication.pdf
Type: application/pdf
Size: 6848 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20070723/231dd29e/attachment.pdf 

[U-Boot-Users] (no subject)

[Jo N. Bonilla]

-------------- next part --------------
A non-text attachment was scrubbed...
Name: notification.pdf
Type: application/pdf
Size: 21640 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20070718/d81fb186/attachment.pdf 

[U-Boot-Users] (no subject)

[hi5 Support]

Hi,

Thanks for writing to hi5 Support!
We apologize for the uncomfortable situation you've experienced on hi5 and thank you for reporting this to us. It is very important to us to provide our members a safe and friendly community.

At hi5 we do not associate ourselves with any sort of spam. We would like to assure you that the member you reported no longer exists with us.

We hope you recognize our commitment to maintain a high level of quality.

Sincerely,
Steven - hi5 Support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070711/b367f33d/attachment.htm 

[U-Boot-Users] (no subject)

[Libor Fiedler - Alistar Systems s.r.o.]

Hi all,

    help please, I have a board with AT91RM9200 and AT49BV6416. Everything works fine but atmel stopped to produce the flash. So I'd like to use AT49BV642D. Do everybody have any version (the higher the better) of u-boot working with this new flash chip ? If so, could send me a patch ??

Thanx for help

Libor



------------------------------
Alistar Systems Ltd.
Strnadova 51
54701 Nachod
CZECH REPUBLIC

Phone: +420 491 428 385
Mobile: +420 604 672 252

I?O: 25936867
VAT: CZ25936867
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070606/85adfc51/attachment.htm 

[U-Boot-Users] (no subject)

[Karl Chen]

Hi


Best regards,

2007-05-14
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070514/bcc0c675/attachment.htm 

[U-Boot-Users] (no subject)

[Vivek Ananda BHADRA]

Hi All,
             I am trying to compile the u-boot for loading into the 7109 cut 3.0 coco ref board. Could anybody tell me what should be the right board name which I should use in the following command: 
                                                      
                                        Make distclean
                                        Make <BOARD NAME>_config
Please let me know if you have got any information about it .

Thanks and regards,
Vivek Bhadra
-----------------------------------------------------
Vivek Bhadra                
Software Engineer
STMicroelectronics Pvt. Ltd.
Plot No.1, Knowledge Park III,
GREATER NOIDA-201 308
Email: vivek-ananda.bhadra at st.com, 
Tel: 91-120-4003088,Extn.3561
Mob: +919899377091
------------------------------------------------------




-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070110/cc4e6dff/attachment.htm 

[U-Boot-Users] (no subject)

[Sangmoon Kim]

Hi,

This patch fixes kvme080 board compiling error and enables the board in
MAKEALL file.

Best Regards,
Sangmoon Kim

Signed-off-by: Sangmoon Kim <dogoil@etinsys.com>

diff --git a/MAKEALL b/MAKEALL
index d2159ef..d95be12 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -106,7 +106,7 @@ ########################################
 LIST_824x="	\
 	A3000		barco		BMW		CPC45		\
 	CU824		debris		eXalion		HIDDEN_DRAGON	\
-			MOUSSE		MUSENKI		MVBLUE		\
+	kvme080		MOUSSE		MUSENKI		MVBLUE		\
 	OXC		PN62		Sandpoint8240	Sandpoint8245	\
 	sbc8240		SL8245		utx8245				\
 "
diff --git a/board/etin/kvme080/u-boot.lds b/board/etin/kvme080/u-boot.lds
index dda3687..13b38b2 100644
--- a/board/etin/kvme080/u-boot.lds
+++ b/board/etin/kvme080/u-boot.lds
@@ -67,6 +67,8 @@ SECTIONS
     . = ALIGN(16);
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
@@ -99,10 +101,12 @@ SECTIONS
   _edata  =  .;
   PROVIDE (edata = .);
 
+  . = .;
   __u_boot_cmd_start = .;
   .u_boot_cmd : { *(.u_boot_cmd) }
   __u_boot_cmd_end = .;
 
+  . = .;
   __start___ex_table = .;
   __ex_table : { *(__ex_table) }
   __stop___ex_table = .;

[U-Boot-Users] (no subject)

[Robert Deliën]

Hi,

The patch attached adds support for the Infineon ADM5120 (formerly ADMtek
ADM5120) SoC to U-Boot. This SoC can be found in countless low-end router
products. See
	http://www.linux-mips.org/wiki/Adm5120#Products_based_on_the_ADM5120
for a list of devices using the ADM5120.

This patch applies cleanly if my previous patches have been applied:
1. pnx8550support.diff
2. nxp_i2c.diff
3. mips_timer2.diff
4. nxp_pci.diff
5. serial_pl010.patch (required)

This U-Boot port for ADM5120 is a private project of mine.

With kind regards,

	Robert.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: adm5120_support.diff.gz
Type: application/octet-stream
Size: 12343 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20061211/b783b046/attachment.obj 

[U-Boot-Users] (no subject)

[Wolfgang Denk]

In message <OF015105FC.2114DF88-ON6525723E.001A1966-6525723E.001A23E0@tcs.com> you wrote:
>
> Now I wanted to upgrade my busybox-0.65 to busybox-1.1.3
>  So I installed the new busy box and copied the bin sbin and usr 
> directories  to the filesytem . When i tried to do tftp it is giving 
> following errors.
...
> kmod: failed to exec /sbin/modprobe -s -k binfmt-4c46, errno = 8 (endless 
> loop)

Are you sure you cross-compile the busybox you iunstalled for the
target system?


Note that all this is completely off topic on this  list.


> Notice: The information contained in this e-mail
..


Please omit such stupid trailers when posting to public mailing lists.

> --=_alternative 001A235B6525723E_=
> Content-Transfer-Encoding: 7bit
> Content-Type: text/html; charset="us-ascii"

And NEVER post HTML here!

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Live long and prosper.
	-- Spock, "Amok Time", stardate 3372.7

[U-Boot-Users] (no subject)

[s.maiti at tcs.com]

Hi All,
I am using linux-2.4.25 kernel and ELDK3.1 toolchain for my Custom 
PPC(MPC8260) board. I am using the ramdisk image which is come along with 
the ELDK.

With this board is coming up.
Now I wanted to upgrade my busybox-0.65 to busybox-1.1.3
 So I installed the new busy box and copied the bin sbin and usr 
directories  to the filesytem . When i tried to do tftp it is giving 
following errors.

Looking up port of RPC 100005/1 on 172.18.18.59
VFS: Mounted root (nfs filesystem).
Freeing unused kernel memory: 56k init
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
kmod: failed to exec /sbin/modprobe -s -k binfmt-4c46, errno = 8 (endless 
loop)


With the old busybox it is working fine.

Please kindly help me in this regard.

Thanks and regards,
Souvik Maiti
Tata Consultancy Services
Mailto: s.maiti at tcs.com
Website: http://www.tcs.com
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain 
confidential or privileged information. If you are 
not the intended recipient, any dissemination, use, 
review, distribution, printing or copying of the 
information contained in this e-mail message 
and/or attachments to it are strictly prohibited. If 
you have received this communication in error, 
please notify us by reply e-mail or telephone and 
immediately and permanently delete the message 
and any attachments. Thank you


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20061208/27928d33/attachment.htm 

[U-Boot-Users] (no subject)

[Rajucm]

[U-Boot-Users] (no subject)

[Gerald Jackson]

Stefan,

Thank you for the init.S file.  But the problem still persists.

Here is what I get:
U-Boot 1.1.4 (Oct  1 2006 - 02:58:55)

CPU:   AMCC PowerPC 440GX Rev. F at 800 MHz (PLB=160, OPB=80, EBC=40
MHz)
       I2C boot EEPROM enabled
       Internal PCI arbiter enabled
       32 kB I-Cache 32 kB D-Cache
Board: Ocotea - AMCC PPC440GX Evaluation Board
I2C:   ready
DRAM:  DIMM slot 0: populated
DIMM slot 1: populated
DIMM slot 0: DDR SDRAM detected
DIMM slot 1: DDR SDRAM detected
DIMM 0 voltage level supported.
Finish program_cfg0
Finish program_cfg1
Finish program_rtr
tr0: 410b401a
Finish program_tr0
Finish program_bxcr Total_Size 805306368     <----  Here is part of the
problem this should return  about a 1Gig of memory but it only returns
805Megs.   

If I try only one dimm and move it to either slot it shows the correct
amount but with two dimms the calculation is wrong.

It seems like I am miss about two (or one) banks from the Dimm which I
assume equals 256M.

I am still working on what is causing the wrong amount.

Gerald


 
 
 

-----Original Message-----
From: Stefan Roese [mailto:sr at denx.de] 
Sent: Sunday, October 01, 2006 2:00 PM
To: u-boot-users@lists.sourceforge.net
Cc: Gerald Jackson
Subject: Re: [U-Boot-Users] (no subject)

Hi Gerald,

On Sunday 01 October 2006 19:15, Gerald Jackson wrote:
> I look more into using both dimms issue and I see two interesting
> things.
>
> 1. With two dimms it never get pass line 1478 - 1500 in spd_sdram.c.
It
> loops once then hangs.
>
> 2. If I disable this part (ie break) I get the ERROR: Cannot determine
a
> common read delay. If I comment out the hang()  It returns but it only
> calculated 768MB of memory.

Only 768MB? Does this mean you are using more than 512MB? As I mentioned

earlier, this can't work right now. The TLB setup is for a max. of
512MB.

Please try the attached init.S file. It fixes the issue mentioned by
Marc 
Howard _and_ adds TLB entries for a max. of 1GB of DDR. It will be
checked 
into the official git tree in a few days.

Please let me know if this changes anything.

Best regards,
Stefan

[U-Boot-Users] (no subject)

[Stefan Roese]

Hi Gerald,

On Sunday 01 October 2006 19:15, Gerald Jackson wrote:
> I look more into using both dimms issue and I see two interesting
> things.
>
> 1. With two dimms it never get pass line 1478 - 1500 in spd_sdram.c.  It
> loops once then hangs.
>
> 2. If I disable this part (ie break) I get the ERROR: Cannot determine a
> common read delay. If I comment out the hang()  It returns but it only
> calculated 768MB of memory.

Only 768MB? Does this mean you are using more than 512MB? As I mentioned 
earlier, this can't work right now. The TLB setup is for a max. of 512MB.

Please try the attached init.S file. It fixes the issue mentioned by Marc 
Howard _and_ adds TLB entries for a max. of 1GB of DDR. It will be checked 
into the official git tree in a few days.

Please let me know if this changes anything.

Best regards,
Stefan
-------------- next part --------------
A non-text attachment was scrubbed...
Name: init.S
Type: text/x-objcsrc
Size: 3481 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20061001/69752937/attachment.bin 

[U-Boot-Users] (no subject)

[Gerald Jackson]

Stefan,

I look more into using both dimms issue and I see two interesting
things.

1. With two dimms it never get pass line 1478 - 1500 in spd_sdram.c.  It
loops once then hangs.

2. If I disable this part (ie break) I get the ERROR: Cannot determine a
common read delay. If I comment out the hang()  It returns but it only
calculated 768MB of memory.

Any sugguests?

Gerald

 
 

-----Original Message-----
From: Stefan Roese [mailto:sr at denx.de] 
Sent: Sunday, October 01, 2006 5:23 AM
To: u-boot-users at lists.sourceforge.net
Cc: Gerald Jackson; Marc.Howard at kla-tencor.com
Subject: Re: [U-Boot-Users] (no subject)

Hi Gerald,

On Sunday 01 October 2006 05:04, Gerald Jackson wrote:
> I made the change that Marc suggested and still no luck. If both dimms
> are in use the system hangs

Hangs where? Also upon SDRAM initialization?

> and if only the second Dimm slot is in use I 
> get:
>
> U-Boot 1.1.4 (Sep 30 2006 - 10:08:43)
>
> CPU:   AMCC PowerPC 440GX Rev. F at 800 MHz (PLB=160, OPB=80, EBC=40
> MHz)
>        I2C boot EEPROM enabled
>        Internal PCI arbiter enabled
>        32 kB I-Cache 32 kB D-Cache
> Board: Ocotea - AMCC PPC440GX Evaluation Board
> I2C:   ready
> DRAM:  ERROR: Cannot determine a common read delay.
> ### ERROR ### Please RESET the board ###
>
> Any Ideals?

Ideals? Not really. But I have an idea! ;-)

How did you get the Board? Directly from AMCC? Did it never work at all?

Your PLB frequency seems strange to me (160MHz). Please try to configure
your 
Ocotea to use a different setup, for example 533MHz CPU and 133MHz PLB.
Here 
is the output from our Ocotea:

U-Boot 1.1.4-g887e2ec9-dirty (Sep  7 2006 - 11:55:16)

CPU:   AMCC PowerPC 440GX Rev. F at 533.333 MHz (PLB=133, OPB=66, EBC=66
MHz)
       I2C boot EEPROM enabled
       Bootstrap Option F - Boot ROM Location I2C (Addr 0x54)
       Internal PCI arbiter enabled
       32 kB I-Cache 32 kB D-Cache
Board: Ocotea - AMCC PPC440GX Evaluation Board
I2C:   ready
DRAM:  256 MB
FLASH:  5 MB
PCI:   Bus Dev VenId DevId Class Int
        00  01  8086  107c  0200  00
In:    serial
Out:   serial
Err:   serial
Net:   ppc_4xx_eth0, ppc_4xx_eth1, ppc_4xx_eth2, ppc_4xx_eth3

Type "run flash_nfs" to mount root filesystem over NFS

Hit any key to stop autoboot:  0
=>   

Best regards,
Stefan

[U-Boot-Users] (no subject)

[Gerald Jackson]

Stefan,

Yes the board works and Pibs works with both Dimms slot in use.
The board came from AMCC and it is the latest board with the 800MHz
440GX chip on it.

The system hangs upon SDRAM initialization, but only with both dimms
slots used.

I didn't even know this problem exist until another company that is
writing a device driver for me told me that the second DIMMS slot
doesn't work on there board. Sure enough it doesn't work on mines
either.

Gerald

-----Original Message-----
From: Stefan Roese [mailto:sr at denx.de] 
Sent: Sunday, October 01, 2006 5:23 AM
To: u-boot-users at lists.sourceforge.net
Cc: Gerald Jackson; Marc.Howard at kla-tencor.com
Subject: Re: [U-Boot-Users] (no subject)

Hi Gerald,

On Sunday 01 October 2006 05:04, Gerald Jackson wrote:
> I made the change that Marc suggested and still no luck. If both dimms
> are in use the system hangs

Hangs where? Also upon SDRAM initialization?

> and if only the second Dimm slot is in use I 
> get:
>
> U-Boot 1.1.4 (Sep 30 2006 - 10:08:43)
>
> CPU:   AMCC PowerPC 440GX Rev. F at 800 MHz (PLB=160, OPB=80, EBC=40
> MHz)
>        I2C boot EEPROM enabled
>        Internal PCI arbiter enabled
>        32 kB I-Cache 32 kB D-Cache
> Board: Ocotea - AMCC PPC440GX Evaluation Board
> I2C:   ready
> DRAM:  ERROR: Cannot determine a common read delay.
> ### ERROR ### Please RESET the board ###
>
> Any Ideals?

Ideals? Not really. But I have an idea! ;-)

How did you get the Board? Directly from AMCC? Did it never work at all?

Your PLB frequency seems strange to me (160MHz). Please try to configure
your 
Ocotea to use a different setup, for example 533MHz CPU and 133MHz PLB.
Here 
is the output from our Ocotea:

U-Boot 1.1.4-g887e2ec9-dirty (Sep  7 2006 - 11:55:16)

CPU:   AMCC PowerPC 440GX Rev. F at 533.333 MHz (PLB=133, OPB=66, EBC=66
MHz)
       I2C boot EEPROM enabled
       Bootstrap Option F - Boot ROM Location I2C (Addr 0x54)
       Internal PCI arbiter enabled
       32 kB I-Cache 32 kB D-Cache
Board: Ocotea - AMCC PPC440GX Evaluation Board
I2C:   ready
DRAM:  256 MB
FLASH:  5 MB
PCI:   Bus Dev VenId DevId Class Int
        00  01  8086  107c  0200  00
In:    serial
Out:   serial
Err:   serial
Net:   ppc_4xx_eth0, ppc_4xx_eth1, ppc_4xx_eth2, ppc_4xx_eth3

Type "run flash_nfs" to mount root filesystem over NFS

Hit any key to stop autoboot:  0
=>   

Best regards,
Stefan

[U-Boot-Users] (no subject)

[Stefan Roese]

Hi Gerald,

On Sunday 01 October 2006 05:04, Gerald Jackson wrote:
> I made the change that Marc suggested and still no luck. If both dimms
> are in use the system hangs

Hangs where? Also upon SDRAM initialization?

> and if only the second Dimm slot is in use I 
> get:
>
> U-Boot 1.1.4 (Sep 30 2006 - 10:08:43)
>
> CPU:   AMCC PowerPC 440GX Rev. F at 800 MHz (PLB=160, OPB=80, EBC=40
> MHz)
>        I2C boot EEPROM enabled
>        Internal PCI arbiter enabled
>        32 kB I-Cache 32 kB D-Cache
> Board: Ocotea - AMCC PPC440GX Evaluation Board
> I2C:   ready
> DRAM:  ERROR: Cannot determine a common read delay.
> ### ERROR ### Please RESET the board ###
>
> Any Ideals?

Ideals? Not really. But I have an idea! ;-)

How did you get the Board? Directly from AMCC? Did it never work at all?

Your PLB frequency seems strange to me (160MHz). Please try to configure your 
Ocotea to use a different setup, for example 533MHz CPU and 133MHz PLB. Here 
is the output from our Ocotea:

U-Boot 1.1.4-g887e2ec9-dirty (Sep  7 2006 - 11:55:16)

CPU:   AMCC PowerPC 440GX Rev. F at 533.333 MHz (PLB=133, OPB=66, EBC=66 MHz)
       I2C boot EEPROM enabled
       Bootstrap Option F - Boot ROM Location I2C (Addr 0x54)
       Internal PCI arbiter enabled
       32 kB I-Cache 32 kB D-Cache
Board: Ocotea - AMCC PPC440GX Evaluation Board
I2C:   ready
DRAM:  256 MB
FLASH:  5 MB
PCI:   Bus Dev VenId DevId Class Int
        00  01  8086  107c  0200  00
In:    serial
Out:   serial
Err:   serial
Net:   ppc_4xx_eth0, ppc_4xx_eth1, ppc_4xx_eth2, ppc_4xx_eth3

Type "run flash_nfs" to mount root filesystem over NFS

Hit any key to stop autoboot:  0
=>   

Best regards,
Stefan

[U-Boot-Users] (no subject)

[Gerald Jackson]

I made the change that Marc suggested and still no luck. If both dimms
are in use the system hangs and if only the second Dimm slot is in use I
get:

U-Boot 1.1.4 (Sep 30 2006 - 10:08:43)

CPU:   AMCC PowerPC 440GX Rev. F at 800 MHz (PLB=160, OPB=80, EBC=40
MHz)
       I2C boot EEPROM enabled
       Internal PCI arbiter enabled
       32 kB I-Cache 32 kB D-Cache
Board: Ocotea - AMCC PPC440GX Evaluation Board
I2C:   ready
DRAM:  ERROR: Cannot determine a common read delay.
### ERROR ### Please RESET the board ###
 

Any Ideals?

 Gerald

-----Original Message-----
From: Gerald Jackson 
Sent: Saturday, September 30, 2006 10:13 AM
To: Marc.Howard at KLA-Tencor.com; sr at denx.de;
u-boot-users at lists.sourceforge.net
Subject: RE: [U-Boot-Users] (no subject)


Here is the error I get if I use the second DIMMS

U-Boot 1.1.4 (Jul 18 2006 - 07:36:20)

CPU:   AMCC PowerPC 440GX Rev. F at 800 MHz (PLB=160, OPB=80, EBC=40
MHz)
       I2C boot EEPROM enabled
       Internal PCI arbiter enabled
       32 kB I-Cache 32 kB D-Cache
Board: Ocotea - AMCC PPC440GX Evaluation Board
I2C:   ready
DRAM:  ERROR: Cannot determine a common read delay.
### ERROR ### Please RESET the board ###

Gerald
 
 
-----Original Message-----
From: Gerald Jackson 
Sent: Friday, September 29, 2006 6:16 PM
To: Marc.Howard at KLA-Tencor.com; sr at denx.de;
u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] (no subject)

Marc,

After you make that change you can use both dimms slot on the ocotea
board?

What error did you receive before the modification?

if I use only the second dimm slot with 256M it errors. if I use the
first dimm slot it is ok and if I use both dimms slot it error as well.


I am using 1.1.4.

Gerald

-----Original Message-----
From: "Howard, Marc"<Marc.Howard@KLA-Tencor.com>
Sent: 9/28/06 5:06:26 PM
To: "Stefan Roese"<sr@denx.de>,
"u-boot-users at lists.sourceforge.net"<u-boot-users@lists.sourceforge.net>
Subject: Re: [U-Boot-Users] (no subject)

Stefan,

Actually > 256MB won't work correctly.  There is a problem in
board/amcc/ocotea/init.S:

tlbtab:
    tlbtab_start
    tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1,
AC_R|AC_W|AC_X|SA_G|SA_I)
    tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1,
AC_R|AC_W|SA_G|SA_I)
    tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
    tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0,
AC_R|AC_W|AC_X )
    tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0,
AC_R|AC_W|AC_X|SA_G|SA_I )
    tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x00000000, 0,
AC_R|AC_W|AC_X|SA_G|SA_I )
    tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I
)
    tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3,
AC_R|AC_W|SA_G|SA_I )
    tlbtab_en

The line:
 
tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x00000000, 0,
AC_R|AC_W|AC_X|SA_G|SA_I )

...should be...

tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0,
AC_R|AC_W|AC_X|SA_G|SA_I )
                                                ^
------------------------------------------------^

The way it currently stands virtual addresses 256-512MB are mapped into
the same region as the 1st 256MB of SDRAM.

Marc Howard


> -----Original Message-----
> From: u-boot-users-bounces at lists.sourceforge.net 
> [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf 
> Of Stefan Roese
> Sent: Thursday, September 28, 2006 5:48 AM
> To: u-boot-users at lists.sourceforge.net
> Subject: Re: [U-Boot-Users] (no subject)
> 
> Hi Gerald,
> 
> On Thursday 28 September 2006 04:03, Gerald Jackson wrote:
> > Does anyone know why u-boot 1.1.4 fails if you use two dimms in the
> > Ocotea Amcc board?
> >
> > I have try two 256 dimm, two 512 dimm, and one 256 dimm in 
> the second
> > slot ( nothing in the first slot) it all fails.
> >
> > Is this a know problem with the Ocotea board?
> 
> No. IIRC, we have tested Ocotea with different DIMM modules. 
> Which U-Boot 
> version are you using? What DIMM modules are you using? And 
> what combination 
> _is_ working?
> 
> A quick look at the TLB setup shows me, that a maximum of 
> 512MBytes could be 
> working. For more at least the TLB setup has to be changed.
> 
> Best regards,
> Stefan
> 
> --------------------------------------------------------------
> -----------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the 
> chance to share your
> opinions on IT & business topics through brief surveys -- and 
> earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge
&CID=DEVDEV
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
> 

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDE
V
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

[U-Boot-Users] (no subject)

[Gerald Jackson]

Here is the error I get if I use the second DIMMS

U-Boot 1.1.4 (Jul 18 2006 - 07:36:20)

CPU:   AMCC PowerPC 440GX Rev. F at 800 MHz (PLB=160, OPB=80, EBC=40
MHz)
       I2C boot EEPROM enabled
       Internal PCI arbiter enabled
       32 kB I-Cache 32 kB D-Cache
Board: Ocotea - AMCC PPC440GX Evaluation Board
I2C:   ready
DRAM:  ERROR: Cannot determine a common read delay.
### ERROR ### Please RESET the board ###

Gerald
 
 
-----Original Message-----
From: Gerald Jackson 
Sent: Friday, September 29, 2006 6:16 PM
To: Marc.Howard at KLA-Tencor.com; sr at denx.de;
u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] (no subject)

Marc,

After you make that change you can use both dimms slot on the ocotea
board?

What error did you receive before the modification?

if I use only the second dimm slot with 256M it errors. if I use the
first dimm slot it is ok and if I use both dimms slot it error as well.


I am using 1.1.4.

Gerald

-----Original Message-----
From: "Howard, Marc"<Marc.Howard@KLA-Tencor.com>
Sent: 9/28/06 5:06:26 PM
To: "Stefan Roese"<sr@denx.de>,
"u-boot-users at lists.sourceforge.net"<u-boot-users@lists.sourceforge.net>
Subject: Re: [U-Boot-Users] (no subject)

Stefan,

Actually > 256MB won't work correctly.  There is a problem in
board/amcc/ocotea/init.S:

tlbtab:
    tlbtab_start
    tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1,
AC_R|AC_W|AC_X|SA_G|SA_I)
    tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1,
AC_R|AC_W|SA_G|SA_I)
    tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
    tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0,
AC_R|AC_W|AC_X )
    tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0,
AC_R|AC_W|AC_X|SA_G|SA_I )
    tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x00000000, 0,
AC_R|AC_W|AC_X|SA_G|SA_I )
    tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I
)
    tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3,
AC_R|AC_W|SA_G|SA_I )
    tlbtab_en

The line:
 
tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x00000000, 0,
AC_R|AC_W|AC_X|SA_G|SA_I )

...should be...

tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0,
AC_R|AC_W|AC_X|SA_G|SA_I )
                                                ^
------------------------------------------------^

The way it currently stands virtual addresses 256-512MB are mapped into
the same region as the 1st 256MB of SDRAM.

Marc Howard


> -----Original Message-----
> From: u-boot-users-bounces at lists.sourceforge.net 
> [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf 
> Of Stefan Roese
> Sent: Thursday, September 28, 2006 5:48 AM
> To: u-boot-users at lists.sourceforge.net
> Subject: Re: [U-Boot-Users] (no subject)
> 
> Hi Gerald,
> 
> On Thursday 28 September 2006 04:03, Gerald Jackson wrote:
> > Does anyone know why u-boot 1.1.4 fails if you use two dimms in the
> > Ocotea Amcc board?
> >
> > I have try two 256 dimm, two 512 dimm, and one 256 dimm in 
> the second
> > slot ( nothing in the first slot) it all fails.
> >
> > Is this a know problem with the Ocotea board?
> 
> No. IIRC, we have tested Ocotea with different DIMM modules. 
> Which U-Boot 
> version are you using? What DIMM modules are you using? And 
> what combination 
> _is_ working?
> 
> A quick look at the TLB setup shows me, that a maximum of 
> 512MBytes could be 
> working. For more at least the TLB setup has to be changed.
> 
> Best regards,
> Stefan
> 
> --------------------------------------------------------------
> -----------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the 
> chance to share your
> opinions on IT & business topics through brief surveys -- and 
> earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge
&CID=DEVDEV
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
> 

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDE
V
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

[U-Boot-Users] (no subject)

[Stefan Roese]

Hi Marc,

On Thursday 28 September 2006 23:07, Howard, Marc wrote:
> Actually > 256MB won't work correctly.  There is a problem in
> board/amcc/ocotea/init.S:

<snip>

> The line:
>
> tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x00000000, 0,
> AC_R|AC_W|AC_X|SA_G|SA_I )
>
> ...should be...
>
> tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0,
> AC_R|AC_W|AC_X|SA_G|SA_I )
>                                                 ^
> ------------------------------------------------^
>
> The way it currently stands virtual addresses 256-512MB are mapped into
> the same region as the 1st 256MB of SDRAM.

Yes, you are right. Thanks. I will fix this in a few days and add some more 
tlb's to supports at least 512MB.

Best regards,
Stefan

[U-Boot-Users] (no subject)

[Howard, Marc]

Stefan,

Actually > 256MB won't work correctly.  There is a problem in
board/amcc/ocotea/init.S:

tlbtab:
    tlbtab_start
    tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1,
AC_R|AC_W|AC_X|SA_G|SA_I)
    tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1,
AC_R|AC_W|SA_G|SA_I)
    tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
    tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0,
AC_R|AC_W|AC_X )
    tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0,
AC_R|AC_W|AC_X|SA_G|SA_I )
    tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x00000000, 0,
AC_R|AC_W|AC_X|SA_G|SA_I )
    tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I
)
    tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3,
AC_R|AC_W|SA_G|SA_I )
    tlbtab_en

The line:
 
tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x00000000, 0,
AC_R|AC_W|AC_X|SA_G|SA_I )

...should be...

tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0,
AC_R|AC_W|AC_X|SA_G|SA_I )
                                                ^
------------------------------------------------^

The way it currently stands virtual addresses 256-512MB are mapped into
the same region as the 1st 256MB of SDRAM.

Marc Howard


> -----Original Message-----
> From: u-boot-users-bounces at lists.sourceforge.net 
> [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf 
> Of Stefan Roese
> Sent: Thursday, September 28, 2006 5:48 AM
> To: u-boot-users at lists.sourceforge.net
> Subject: Re: [U-Boot-Users] (no subject)
> 
> Hi Gerald,
> 
> On Thursday 28 September 2006 04:03, Gerald Jackson wrote:
> > Does anyone know why u-boot 1.1.4 fails if you use two dimms in the
> > Ocotea Amcc board?
> >
> > I have try two 256 dimm, two 512 dimm, and one 256 dimm in 
> the second
> > slot ( nothing in the first slot) it all fails.
> >
> > Is this a know problem with the Ocotea board?
> 
> No. IIRC, we have tested Ocotea with different DIMM modules. 
> Which U-Boot 
> version are you using? What DIMM modules are you using? And 
> what combination 
> _is_ working?
> 
> A quick look at the TLB setup shows me, that a maximum of 
> 512MBytes could be 
> working. For more at least the TLB setup has to be changed.
> 
> Best regards,
> Stefan
> 
> --------------------------------------------------------------
> -----------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the 
> chance to share your
> opinions on IT & business topics through brief surveys -- and 
> earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge
&CID=DEVDEV
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
> 

[U-Boot-Users] (no subject)

[Stefan Roese]

Hi Gerald,

On Thursday 28 September 2006 04:03, Gerald Jackson wrote:
> Does anyone know why u-boot 1.1.4 fails if you use two dimms in the
> Ocotea Amcc board?
>
> I have try two 256 dimm, two 512 dimm, and one 256 dimm in the second
> slot ( nothing in the first slot) it all fails.
>
> Is this a know problem with the Ocotea board?

No. IIRC, we have tested Ocotea with different DIMM modules. Which U-Boot 
version are you using? What DIMM modules are you using? And what combination 
_is_ working?

A quick look at the TLB setup shows me, that a maximum of 512MBytes could be 
working. For more at least the TLB setup has to be changed.

Best regards,
Stefan

[U-Boot-Users] (no subject)

[Gerald Jackson]

Does anyone know why u-boot 1.1.4 fails if you use two dimms in the
Ocotea Amcc board?

 

I have try two 256 dimm, two 512 dimm, and one 256 dimm in the second
slot ( nothing in the first slot) it all fails.

 

 

Is this a know problem with the Ocotea board?

 

 

Gerald 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060927/823592cb/attachment.htm 

[U-Boot-Users] (no subject)

[tianxue lian]

liantianxue at gmail.com

[U-Boot-Users] (no subject)

[Jeff Mann]

I am having a problem in board.c. I realize the problem is probobly a
configuration error, and would appreciate help from those most
experienced in identifying the cause. 

I am having a problem in board_init(...) in ./lib_ppc/board.c (see
except below). The problem seems to be the result of incorrect
__u_boot_cmd_start and __u_boot_cmd_end values. You see,
__u_boot_cmd_end - __u_boot_cmd_start = 0xFF01C118-0xFFff01B838 = 0x8E0
= 2272. 

[cmdtp++] is preforming [cmdtp = cmdtp + 24] (as you know, cmdtp is a
pointer of type cmd_tbl_t). However, 2272 is not divisible by 24. Thus
in "for (cmdtp = &__u_boot_cmd_start; cmdtp !=  &__u_boot_cmd_end;
cmdtp++)," [cmdtp !=  &__u_boot_cmd_end] will always be true; cmdtp will
never equal &__u_boot_cmd_end. So, &__u_boot_cmd_end is jumped over and
cmdtp continues until it exceeds the DRAM boundary (64MB or 0x03FFFFFF)
and results in an error

U-boot is runing from RAM at this point. It had been coppied to
0x03FDF000. so __u_boot_cmd_end actually = 0x03FFb118 and
__u_boot_cmd_start actually = 0x03FFa838. 

Thanks for your help,
JM

    ./lib_ppc/board.c

    IN: void board_init_r(...)

 629         /*
 630          * We have to relocate the command table manually
 631          */
 632         for (cmdtp = &__u_boot_cmd_start; cmdtp !=
&__u_boot_cmd_end; cmdtp++) {
 633                 ulong addr;
 634                 addr = (ulong) (cmdtp->cmd) + gd->reloc_off;
 635 #if 0
 636                 printf ("Command \"%s\": 0x%08lx => 0x%08lx\n",
 637                                 cmdtp->name, (ulong) (cmdtp->cmd),
addr);
 638 #endif
 639                 cmdtp->cmd =
 640                         (int (*)(struct cmd_tbl_s *, int, int, char
*[]))addr;
 641 
 642                 addr = (ulong)(cmdtp->name) + gd->reloc_off;
 643                 cmdtp->name = (char *)addr;
 644 
 645                 if (cmdtp->usage) {
 646                         addr = (ulong)(cmdtp->usage) +
gd->reloc_off;
 647                         cmdtp->usage = (char *)addr;
 648                 }
 649 #ifdef  CFG_LONGHELP
 650                 if (cmdtp->help) {
 651                         addr = (ulong)(cmdtp->help) +
gd->reloc_off;
 652                         cmdtp->help = (char *)addr;
 653                 }
 654 #endif
 655         }

MAP
...
ff01b838 A __u_boot_cmd_start
...
ff01bd40 D __u_boot_cmd_autoscr
ff01bd58 D __u_boot_cmd_bdinfo
ff01bd70 D __u_boot_cmd_reset
ff01bd88 D __u_boot_cmd_go
ff01bda0 D __u_boot_cmd_imls
ff01bdb8 D __u_boot_cmd_iminfo
ff01bdd0 D __u_boot_cmd_bootd
ff01bde8 D __u_boot_cmd_boot
ff01be00 D __u_boot_cmd_bootm
ff01be18 D __u_boot_cmd_coninfo
ff01be30 D __u_boot_cmd_bootvx
ff01be48 D __u_boot_cmd_bootelf
ff01be60 D __u_boot_cmd_protect
ff01be78 D __u_boot_cmd_erase
ff01be90 D __u_boot_cmd_flinfo
ff01bea8 D __u_boot_cmd_itest
ff01bec0 D __u_boot_cmd_loadb
ff01bed8 D __u_boot_cmd_loads
ff01bef0 D __u_boot_cmd_mtest
ff01bf08 D __u_boot_cmd_loop
ff01bf20 D __u_boot_cmd_base
ff01bf38 D __u_boot_cmd_crc32
ff01bf50 D __u_boot_cmd_cmp
ff01bf68 D __u_boot_cmd_cp
ff01bf80 D __u_boot_cmd_mw
ff01bf98 D __u_boot_cmd_nm
ff01bfb0 D __u_boot_cmd_mm
ff01bfc8 D __u_boot_cmd_md
ff01bfe0 D __u_boot_cmd_sleep
ff01bff8 D __u_boot_cmd_nfs
ff01c010 D __u_boot_cmd_rarpboot
ff01c028 D __u_boot_cmd_tftpboot
ff01c040 D __u_boot_cmd_bootp
ff01c058 D __u_boot_cmd_run
ff01c070 D __u_boot_cmd_saveenv
ff01c088 D __u_boot_cmd_setenv
ff01c0a0 D __u_boot_cmd_printenv
ff01c0b8 D __u_boot_cmd_question_mark
ff01c0d0 D __u_boot_cmd_help
ff01c0e8 D __u_boot_cmd_echo
ff01c100 D __u_boot_cmd_version
ff01c118 A __start___ex_table
ff01c118 A __stop___ex_table
ff01c118 A __u_boot_cmd_end
...

[U-Boot-Users] (no subject)

[shizhi21cn]

I port u-boot to magicarm board based on lpc2290, this board has a nor flash whose address range form 0x80000000 to 0x801fffff 
ram address(0x81000000-0x817fffff). I modified the micro TEXT_BASE to 0x81080000 and dowmload the u-boot.bin into the flash. the u-boot doesn't work at all . when i modified the micao TEXT_BASE to 0x80000000 and download to flash ,it only work for  a while and soon collapsed .  who can tell me what the problem is.
    this is  the ld sccript 
      
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(_start)
SECTIONS
{
 . = 0x80000000;

 . = ALIGN(4);
 .text      :
 {
   cpu/lpc2200/start.o (.text)
   *(.text)
 }

 . = ALIGN(4);
 .rodata : { *(.rodata) }

 . = ALIGN(4);
 .data : { *(.data) }

 . = ALIGN(4);
 .got : { *(.got) }

  . = .;
  __u_boot_cmd_start = .;
  .u_boot_cmd : { *(.u_boot_cmd) }
  __u_boot_cmd_end = .;

 armboot_end_data = .;

 . = ALIGN(4);
 __bss_start = .;
 .bss : { *(.bss) }
 _end = .;
}





shizhi21cn
2006-06-18
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060618/3793d593/attachment.htm 

[U-Boot-Users] (no subject)

[shizhi21cn]

I port u-boot to magicarm board based on lpc2290, this board has a nor flash whose address range form 0x80000000 to 0x801fffff 
ram address(0x81000000-0x817fffff). I modified the micro TEXT_BASE to 0x81080000 and dowmload the u-boot.bin into the flash. the u-boot doesn't work at all . when i modified the micao TEXT_BASE to 0x80000000 and download to flash ,it only work for  a while and soon collapsed .  who can tell me what the problem is.
    this is  the ld sccript 
      
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(_start)
SECTIONS
{
 . = 0x80000000;

 . = ALIGN(4);
 .text      :
 {
   cpu/lpc2200/start.o (.text)
   *(.text)
 }

 . = ALIGN(4);
 .rodata : { *(.rodata) }

 . = ALIGN(4);
 .data : { *(.data) }

 . = ALIGN(4);
 .got : { *(.got) }

  . = .;
  __u_boot_cmd_start = .;
  .u_boot_cmd : { *(.u_boot_cmd) }
  __u_boot_cmd_end = .;

 armboot_end_data = .;

 . = ALIGN(4);
 __bss_start = .;
 .bss : { *(.bss) }
 _end = .;
}





shizhi21cn
2006-06-18
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060618/7dec0c1f/attachment.htm 

[U-Boot-Users] (no subject)

[Norman Baier]

> please keep the list cc'ed.

Sorry, I did just notice the mistake when you've already answered.

Norman

-- 


Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
      Ideal f?r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer
    

[U-Boot-Users] (no subject)

[Wolfgang Denk]

In message <E7E846FF4F1FE947AABFF850350820780CC09B@PTLISI051MSX.PT001.SIEMENS.NET> you wrote:
> 
> 	Hello,
> 
> 	I've had a similar problem when booting an MPC8541E custom board.
...
> -----Original Message-----


Grrrrgh.. No subject, even though replying to a previous message, and
top-post/full-quote?

PLEASE read the netiquette, see
http://www.netmeister.org/news/learn2quote.html

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If a man had a child who'd gone  anti-social,  killed  perhaps,  he'd
still tend to protect that child.
	-- McCoy, "The Ultimate Computer", stardate 4731.3

[U-Boot-Users] (no subject)

[Joao, Nuno]

	Hello,

	I've had a similar problem when booting an MPC8541E custom board.
	It was caused by having configured 2 chipselects only 32K apart
	(which should be supported). Changed to have 64K separation and
	the problem went away. I've never investigated the issue further.

	Best Regards


-----Original Message-----
From: u-boot-users-admin@lists.sourceforge.net [mailto:u-boot-users-admin at lists.sourceforge.net] On Behalf Of Peter Wright
Sent: sexta-feira, 5 de Maio de 2006 21:50
To: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] (no subject)

I have a custom MPC8560 Board that I've been told to get U-Boot working on.

I've added in board definition into it and modified the default MPC8560ADS
configuration for it.? I have been able to burn it into flash on the board,
and step through it.? U-Boot boots up and configures the TLB and then jumps
to the proper place in FLASH to continue the load.? But it seems to go off
into the middle of nowhere when it comes to the serial_puts command.? From
the JTAG and using the memory map that U-Boot compile makes it gets into the
serial_puts function and then jumps off into main memory for some reason.?
It then halts at where the debugger says is an invalid opcode.

Has anyone seen these sorts of problems before?

[U-Boot-Users] (no subject)

[Wolfgang Denk]

Dear Peter,

please provide a *descriptive* Subject next time. And ask  short  and
simple  questions  instead  of  posting  hundrets  of  lines of ighly
specific stuff which nobody will read. Maybe you should (re-) read
http://www.catb.org/%7eesr/faqs/smart-questions.html

N message <007601c67085$77b32bf0$3b8119ac@bc.ca.utstar.com> you wrote:
> 
> I?ve added in board definition into it and modified the default MPC8560ADS
> configuration for it.? I have been able to burn it into flash on the > board,

What makes you think the MPC8560ADS would be a good starting point?

> The board I?ve been given is very bare.? It has 256 MByte DDR Main > RAM,? 32
> MByte Flash (64k sectors), Ethernet on MII, and Serial on SCC1.? > Nothing
> else on it.

I bet this is wrong. There are probabnly ten times more components on
your board which you did not mention that there are you did.

> This board use to run VxWorks so I took most of the settings used for > that
> and modified U-boot as following (I hope someone can tell me if I did
> something wrong)

No. How could we? We have absolutely no idea what your hardware looks like.

> Anyone have any idea on what I?ve done wrong?? Are there any other board
> definitions in U-Boot I could use that might meet what I have better?

How could we without even having the slightest ideas of what you have?

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
panic: kernel trap (ignored)

[U-Boot-Users] (no subject)

[Peter Wright]

I have a custom MPC8560 Board that I?ve been told to get U-Boot working on.

I?ve added in board definition into it and modified the default MPC8560ADS
configuration for it.? I have been able to burn it into flash on the board,
and step through it.? U-Boot boots up and configures the TLB and then jumps
to the proper place in FLASH to continue the load.? But it seems to go off
into the middle of nowhere when it comes to the serial_puts command.? From
the JTAG and using the memory map that U-Boot compile makes it gets into the
serial_puts function and then jumps off into main memory for some reason.?
It then halts at where the debugger says is an invalid opcode.

Has anyone seen these sorts of problems before?

The board I?ve been given is very bare.? It has 256 MByte DDR Main RAM,? 32
MByte Flash (64k sectors), Ethernet on MII, and Serial on SCC1.? Nothing
else on it.

This board use to run VxWorks so I took most of the settings used for that
and modified U-boot as following (I hope someone can tell me if I did
something wrong)

Made a new directory for the board
Copied the MPC8560ADS board files to the new location
Copied include/configs/MPC8560ADS.h? to a file matching my new board.

Modified the .h file to meet the new board definitions.? Removed the SDRAM
on LBC, and the SPD_EEPROM

Modified the DDR as follows:

??? #define CFG_SDRAM_SIZE????? 256???????????? /* DDR is 256MB */
??? #define CFG_DDR_CS0_BNDS??? 0x0000000f????? /* 0-256MB */
??? #define CFG_DDR_CS0_CONFIG? 0x80000102
??? #define CFG_DDR_TIMING_1??? 0x37344321
??? #define CFG_DDR_TIMING_2??? 0x00000800????? /* P9-45,may need tuning */
??? #define CFG_DDR_CONTROL???? 0xc2000000????? /* unbuffered,no DYN_PWR */
??? #define CFG_DDR_MODE??????? 0x00000062????? /* DLL,normal,seq,4/2.5 */
??? #define CFG_DDR_INTERVAL??? 0x05100100????? /* autocharge,no open page
*/

Modified flash section as:

#define CFG_FLASH_BASE????????? 0xfe000000????? /* start of FLASH 32M */
#define CFG_BR0_PRELIM????????? 0xfe001001????? /* port size 16bit */

#define CFG_OR0_PRELIM????????? 0xfe000797????? /* 16MB Flash */
#define CFG_MAX_FLASH_BANKS???? 1?????????????? /* number of banks */
#define CFG_MAX_FLASH_SECT????? 512???????????? /* sectors per device */

Which match the settings that were used for VxWorks for this area

I left I2C alone even though the board has no I2C? when I tried to remove it
u-boot wouldn?t compile.

I then modified init.S in the board directory so the TLB looks like:

tlb1_entry:
??????? entry_start

??????? /*
???????? * Number of TLB0 and TLB1 entries in the following table
???????? */
??????? .long 12

#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
??? ????/*
???????? * TLB0???????? 4K????? Non-cacheable, guarded
???????? * 0xff700000?? 4K????? Initial CCSRBAR mapping
???????? *
???????? * This ends up at a TLB0 Index==0 entry, and must not collide
???????? * with other TLB0 Entries.
???????? */
??????? .long TLB1_MAS0(0, 0, 0)
??????? .long TLB1_MAS1(1, 0, 0, 0, 0)
??????? .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
??????? .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT),
0,0,0,0,0,1,0,1,0,1)
#else
#error("Update the number of table entries in tlb1_entry")
#endif

??????? /*
???????? * TLB0???????? 16K???? Cacheable, non-guarded
???????? * 0xd001_0000? 16K???? Temporary Global data for initialization
???????? *
???????? * Use four 4K TLB0 entries.? These entries must be cacheable
???????? * as they provide the bootstrap memory before the memory
???????? * controler and real memory have been configured.
???????? *
???????? * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
???????? * and must not collide with other TLB0 entries.
???????? */
??????? .long TLB1_MAS0(0, 0, 0)
??????? .long TLB1_MAS1(1, 0, 0, 0, 0)
??????? .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
??????????????????????? 0,0,0,0,0,0,0,0)
??????? .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
??????????????????????? 0,0,0,0,0,1,0,1,0,1)

??????? .long TLB1_MAS0(0, 0, 0)
??????? .long TLB1_MAS1(1, 0, 0, 0, 0)
??????? .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
??? ????????????????????0,0,0,0,0,0,0,0)
??????? .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
??????????????????????? 0,0,0,0,0,1,0,1,0,1)

??????? .long TLB1_MAS0(0, 0, 0)
??????? .long TLB1_MAS1(1, 0, 0, 0, 0)
??????? .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
??????????????????????? 0,0,0,0,0,0,0,0)
??????? .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
??????????????????????? 0,0,0,0,0,1,0,1,0,1)
??????? .long TLB1_MAS0(0, 0, 0)
??????? .long TLB1_MAS1(1, 0, 0, 0, 0)
??????? .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
??????????????????????? 0,0,0,0,0,0,0,0)
??????? .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
???? ???????????????????0,0,0,0,0,1,0,1,0,1)


??????? /*
???????? * TLB 0:?????? 16M???? Non-cacheable, guarded
???????? * 0xff000000?? 16M???? FLASH
???????? * Out of reset this entry is only 4K.
???????? */
??????? .long TLB1_MAS0(1, 0, 0)
??????? .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
??????? .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE + 0x01000000),
0,0,0,1,0,1,1,0)
??????? .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE + 0x01000000),
0,0,0,0,1,1,1,1,1,1)

??????? /*
???????? * TLB 1:?????? 256M??? Non-cacheable, guarded
???????? * 0x80000000?? 256M??? PCI1 MEM First half
???????? */
??????? .long TLB1_MAS0(1, 1, 0)
??????? .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
??????? .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
??????? .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE),
0,0,0,0,0,1,0,1,0,1)

??????? /*
???????? * TLB 2:?????? 256M??? Non-cacheable, guarded
???????? * 0x90000000?? 256M??? PCI1 MEM Second half
???????? */
??????? .long TLB1_MAS0(1, 2, 0)
??????? .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
??????? .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
??????????????????????? 0,0,0,0,1,0,1,0)
??????? .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
??????????????????? ????0,0,0,0,0,1,0,1,0,1)

??????? /*
???????? * TLB 3:?????? 16M???? Non-cacheable, guarded
???????? * 0xfe000000?? 16M???? FLASH
???????? */
??????? .long TLB1_MAS0(1, 3, 0)
??????? .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
??????? .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,1,0,1,1,0)
??????? .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,1,1,1,1,1,1)


??????? /*
???????? * TLB 5:?????? 64M???? Non-cacheable, guarded
???????? * 0xe000_0000? 1M????? CCSRBAR
???????? * 0xe200_0000? 16M? ???PCI1 IO
???????? */
??????? .long TLB1_MAS0(1, 5, 0)
??????? .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
??????? .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
??????? .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)

??????? /*
???????? * TLB 7:?????? 16K???? Non-cacheable, guarded
???????? * 0xf8000000?? 16K???? BCSR registers
???????? */
??????? .long TLB1_MAS0(1, 7, 0)
??????? .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16K)
??????? .long TLB1_MAS2(E500_TLB_EPN(CFG_BCSR), 0,0,0,0,1,0,1,0)
??????? .long TLB1_MAS3(E500_TLB_RPN(CFG_BCSR), 0,0,0,0,0,1,0,1,0,1)

#if !defined(CONFIG_SPD_EEPROM)
??????? /*
???????? * TLB 8:?????? 256M??? DDR
???????? * 0x00000000?? 64M???? DDR System memory
???????? * 0x04000000?? 64M???? DDR System memory
???????? * Without SPD EEPROM configured DDR, this must be setup manually.
???????? * Make sure the TLB count at the top of this table is correct.
???????? * Likely it needs to be increased by two for these entries.
???????? */

??????? .long TLB1_MAS0(1, 8, 0)
??????? .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
??????? .long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,1,1,0)
??????? .long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE),
0,0,0,0,1,1,1,1,1,1)
#endif

??????? entry_end

Modified the Local Address window to:

#if !defined(CONFIG_SPD_EEPROM)
#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
/*#define LAWAR0??????? (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE &
LAWAR_SIZE_256M))*/
#define LAWAR0 0x80f0001b
#else
#define LAWBAR0 0
#define LAWAR0? ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) &
~LAWAR_EN)
#endif

#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
#define LAWAR1? (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE &
LAWAR_SIZE_512M))

/*
?* This is not so much the FLASH map as it is the whole localbus map.
?*/
#define LAWBAR2 ((CFG_FLASH_BASE>>12) & 0xfffff)
#define LAWAR2? (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE &
LAWAR_SIZE_32M))

law_entry:
??????? entry_start
??????? .long 0x04
??????? .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
??????? entry_end


Anyone have any idea on what I?ve done wrong?? Are there any other board
definitions in U-Boot I could use that might meet what I have better?

Peter Wright
Senior Software Engineer
Base Station Development
CDMA Division
Main: 1-604-276-0055
Direct: 1-604-303-8599? ext 267

[U-Boot-Users] (no subject)

[Wolfgang Denk]

In message <003701c64800$f989b7f0$091a1bac@serra.es> you wrote:
> 
> This patch add a utility to download the image through a bdm ti the
> avnet5282 board.

This is the same patch as you sent before, under a different  subject
and desrciption.

Rejected, too.

Please be more careful what you post!

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Documentation is like sex: when it is good, it is  very,  very  good;
and when it is bad, it is better than nothing.         - Dick Brandon

[U-Boot-Users] (no subject)

[Daniel Alomar]

Hi,

This patch add a utility to download the image through a bdm ti the
avnet5282 board.

Regards,

Daniel Alomar i Claramonte
Research & Development Electronic Dept.
SERRA SOLDADURA, S.A.
WEB Site: http://www.serrasold.com
Knowledge Site: http://serratron.serrasold.com 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bdm-uboot1.1.4-avnet5282.patch.tar.bz2
Type: application/octet-stream
Size: 17024 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20060315/3bc2d522/attachment.obj 

[U-Boot-Users] (no subject)

[tmike at recipes4linux.com]

confirm 723287

[U-Boot-Users] (no subject)

[Wolfgang Denk]

In message <NEBBKBLAILPMPGBGOPJLAEFLGNAA.jerry@schieffer.us> you wrote:
> Recently, I acquired a few surplus boards from a defunct product for
> the home entertainment industry.  The boards have an IBM PowerPC
> 405GP,support for DRAM, PCI bus cards and an onboard IDE controller
> (Promise PDC20265) as well as serial and Ethernet I/O.  The board
> originally has PPCBoot firmware (see attachment at end of this email
> for details).

I suggest you ask the manufacturer of these boards for the PPCboot sources. They must be available (GPL).

> configuring U-Boot for the board.  (Or if someone recognizes the board
> and could tell me a valid model configuration to use, so much
> better --Silk screen information says "Digital Home Technologies". ).

That's not much of information.

> I am new to ELDK, PPC, and Linux, so I need pointers to how to
> proceed.  I wonder if the interrupts for the IDE controller are

In general U-Boot does not use interrupts.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"In matters of principle, stand like a rock;  in  matters  of  taste,
swim with the current."                            - Thomas Jefferson

[U-Boot-Users] (no subject)

[Jerry K. Schieffer]

Recently, I acquired a few surplus boards from a defunct product for
the home entertainment industry.  The boards have an IBM PowerPC
405GP,support for DRAM, PCI bus cards and an onboard IDE controller
(Promise PDC20265) as well as serial and Ethernet I/O.  The board
originally has PPCBoot firmware (see attachment at end of this email
for details).

The PPCBoot firmware does not seem to properly save the environment
with saveenv - it says it does, but the new contents are not there
after a "reset" command.

So, I would like to generate a version of U-Boot for the board.  I
started with the current version of ELDK and files for the "walnut"
eval board.  I have been able to get U-Boot to work except for a
couple of items and would like to solicit help or advice in
configuring U-Boot for the board.  (Or if someone recognizes the board
and could tell me a valid model configuration to use, so much
better --Silk screen information says "Digital Home Technologies". ).

I cannot determine a proper configuration for the IDE controller. ( As
extra information, I have reconfigured the embedded linux from the
ELDK, rebuilt the kernel, and it boots ovet tftp and operates with the
IDE disk.- I just started with walnut config and added some ide
stuff - I can supply the config file if needed)  U-Boot displays the
following:

?> reset

U-Boot 1.1.4 (Feb 27 2006 - 14:36:36)

CPU:   AMCC PowerPC 405GP Rev. E at 266.640 MHz (PLB=66, OPB=33,
EBC=33 MHz)
       Internal PCI arbiter enabled, PCI async ext clock used
       16 kB I-Cache 8 kB D-Cache
Board: Walnut - AMCC PPC405GP Evaluation Board
I2C:   ready
DRAM:  32 MB
FLASH: 512 kB
PCI:   Bus Dev VenId DevId Class Int
        00  04  105a  0d30  0101  1d
In:    serial
Out:   serial
Err:   serial
Net:   ppc_4xx_eth0
IDE:   Bus 0:
............................................................** Timeout
**

Type "run flash_nfs" to mount root filesystem over NFS

Hit any key to stop autoboot:  0

Here is a diff between my version of the .../include/configs/walnut.h
and the original (note I used the

$ diff walnut.h walnut.h.orig
40d39
<                                         /* ...and on special board
*/
68c67
<       "rootpath=/home/jks/eldk/ppc_4xx\0"
\
---
>       "rootpath=/opt/eldk/ppc_4xx\0"
\
103d101
<                               CFG_CMD_IDE     | \
302,330d298
<
<
<
< /************************************************************
<  * IDE/ATA stuff
<  ************************************************************/
<
< #define CFG_IDE_MAXBUS          1               /* max. 1 IDE busses
*/
< #define CFG_IDE_MAXDEVICE       (CFG_IDE_MAXBUS*2) /* max. 2 drives
per IDE bus
< */
<
< #define CFG_ATA_BASE_ADDR       0xE8000000
< #define CFG_ATA_IDE0_OFFSET     0x01F0          /* ide0 offste */
< #define CFG_ATA_IDE1_OFFSET     0x0170          /* ide1 offset */
< #define CFG_ATA_DATA_OFFSET     0               /* data reg offset
*/
< #define CFG_ATA_REG_OFFSET      0               /* reg offset */
< #define CFG_ATA_ALT_OFFSET    0               /* alternate register
offset */
<
< #undef  CONFIG_IDE_8xx_DIRECT      /* no pcmcia interface required
*/
< #undef  CONFIG_IDE_LED         /* no led for ide supported     */
< #undef  CONFIG_IDE_RESET       /* no reset for ide supported     */
<
< /************************************************************
<  * DISK Partition support
<  ************************************************************/
< #define CONFIG_DOS_PARTITION
<
<
<

I am new to ELDK, PPC, and Linux, so I need pointers to how to
proceed.  I wonder if the interrupts for the IDE controller are
improperly configured, but don't see how to correct that.  I apologize
if I have included too much or inappropriate information in this
message.

Thank You,
Jerry Schieffer


Here is the reset message from the original PPCBoot firmware on the
board:


PPCBoot 1.1.2 (Feb 13 2002 - 15:46:54)

CPU:   IBM PowerPC 405GP Rev. E@264 MHz (PLB=66, OPB=33, EBC=33
MHz)
           PCI async ext clock used, internal PCI arbiter enabled

Board: ### No HW ID - assuming WALNUT405
=> reset^M\xff

PPCBoot 1.1.2 (Feb 13 2002 - 15:46:54)

CPU:   IBM PowerPC 405GP Rev. E at 264 MHz (PLB=66, OPB=33, EBC=33
MHz)
           PCI async ext clock used, internal PCI arbiter enabled

Board: ### No HW ID - assuming WALNUT405
DRAM:
Reading DIMM...
Config timing register
   Raw i2c data[27] 0x0f; data[29] 0x0f; data[127] 0xaf
   bus_period 15
single-sided DIMM
sdram0_pmit 7c00000
sdram0_besr0 ffffffff
sdram0_besr1 ffffffff
sdram0_ecccfg 0
sdram0_eccesr ffffffff
sdram0_rtr 20880000
sdram0_tr 10a801a
sdram0_b0cr 46001
sdram0_b1cr 0
sdram0_b2cr 1046001
sdram0_b3cr 0
sdram0_cfg 80800000
32 MB
Stack Pointer before machine check 01faef70
New Stack Pointer is: 01faef68
Relocating addr_sp 01faef68; bd 01faef8c; addr 01fd0000
Now running in RAM - PPCBoot at: 01fd0000
FLASH: 512 kB
*** Warning - bad CRC, using default environment

**EJK PCI_Init
PCI:   Bus Dev enId DevId Class Int
PCI_Scan:Device 0 is present Bus Func 0 ClassCode 600
PCI_Config_Device:Read Base Addr Reg 1 = 0x80000008
  ***PCI Memory space = 0x80000000 bytes
Device 1 not present
Device 2 not present
PCI_Scan:Device 3 is present Bus Func 1800 ClassCode c00
PCI_Config_Device:Read Base Addr Reg 0 = 0xfffff800
  ***PCI Memory space = 0x1000 bytes
PCI_Config_Device:Read Base Addr Reg 1 = 0xffffc000
  ***PCI Memory space = 0x4000 bytes
        00  03  104c  8021  0c00  1c
PCI_Scan:Device 4 is present Bus Func 2000 ClassCode 101
IDE device found:
PCI_Config_Device:Read Base Addr Reg 0 = 0x000001f1
  ***PCI I/O space = 0x10 bytes 0
IDE-Just Set CFG_ATA_BASE_ADDR to e8000000
PCI_Config_Device:Read Base Addr Reg 1 = 0x000003f5
  ***PCI I/O space = 0x4 bytes 10
PCI_Config_Device:Read Base Addr Reg 2 = 0x00000171
  ***PCI I/O space = 0x10 bytes 20
PCI_Config_Device:Read Base Addr Reg 3 = 0x00000375
  ***PCI I/O space = 0x4 bytes 30
PCI_Config_Device:Read Base Addr Reg 4 = 0xffffffc1
  ***PCI I/O space = 0x40 bytes 40
PCI_Config_Device:Read Base Addr Reg 5 = 0xfffe0000
  ***PCI Memory space = 0x20000 bytes
Hardcode address e80001f0
        00  04  105a  0d30  0101  1d
Device 5 not present
Device 6 not present
Device 7 not present
Device 8 not present
Device 9 not present
In:    serial
Out:   serial
Err:   serial
IDE:   cmd_ide:About to init PIO timing modes.
PIO Mode 0: setup=70 ns/325033 clk  len=165 ns/2300066 clk  hold=30
ns/1980000 c
lk
PIO Mode 1: setup=50 ns/3300000 clk  len=125 ns/3955033 clk  hold=20
ns/1320000
clk
PIO Mode 2: setup=30 ns/1980000 clk  len=101 ns/2371033 clk  hold=15
ns/990000 c
lk
PIO Mode 3: setup=30 ns/1980000 clk  len= 80 ns/985033 clk  hold=10
ns/660000 cl
k
PIO Mode 4: setup=25 ns/1650000 clk  len= 70 ns/325033 clk  hold=10
ns/660000 cl
k
cmd_ide:About to call reset.
Bus 0 dev 0: at address e80001f0not available  Status = 0x00
Hit any key to stop autoboot:  3 ^H^H^H 2 ^H^H^H 1 ^H^H^H 0

** Device 0 not available
## Booting image at 00100000 ...
Bad Magic Number
=>

[U-Boot-Users] (no subject)

[Wolfgang Denk]

In message <OFEB63BC56.1BE20D74-ON4825711C.004474B1@photontec.com> you wrote:
>
>        Where is the code about: 
>           SMC1 Register (SMCMR)Setting;
>           SCC1 Registers(GSMR_L,DSR and so on.) Setting;
>           FEC  Register(SDCR) Setting;
> 
>           PAPAR,PCPAR and PDPAR Setting;

May I suggest that you use tools like grep to search the source code?

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Clothes make the man. Naked people have little  or  no  influence  on
society.                                                 - Mark Twain

[U-Boot-Users] (no subject)

[???]

Dear Mr.Wolfgang:
       In the TQM860L
       Where is the code about: 
          SMC1 Register (SMCMR)Setting;
          SCC1 Registers(GSMR_L,DSR and so on.) Setting;
          FEC  Register(SDCR) Setting;

          PAPAR,PCPAR and PDPAR Setting;

	

       
Yours Sincerely,

       Yuwei Qin
        yuwei_qin at photontec.com
          2006-02-21

[U-Boot-Users] (no subject)

[Wilson Callan]

[U-Boot-Users] (no subject)

[Nguyen Nguyen]

Hello Group,

 

I am trying to put u-boot on my Embedded Planet Board EP8248 and it
keeps looping in the initialization cycle:

 

U-Boot 1.1.2 (Dec 13 2004 - 21:11:34)
MPC8248 Reset Status: Check Stop, External Soft, External Hard
MPC8248 Clock Configuration
 - Bus-to-Core Mult 3.5x, VCO Div 2, 60x Bus Freq  30-85 , Core Freq
100-300
 - dfbrg 1, corecnf 0x0e, busdf 3, cpmdf 1, plldf 0, pllmf 5
 - vco_out  396000000, scc_clk   99000000, brg_clk   24750000
 - cpu_clk  231000000, cpm_clk  198000000, bus_clk   66000000
 - pci_clk   66000000

CPU:   MPC8248 (HiP7 Rev 13, Mask 0.0 0K50M) at 231 MHz
Board: EP8248E 1.0 CPLD revision 2
I2C:   ready
DRAM:  128 M

U-Boot 1.1.2 (Dec 13 2004 - 21:11:34)

MPC8248 Reset Status: Check Stop, External Soft, External Hard

MPC8248 Clock Configuration
......

 

 

Could you make some suggestions?  I thought U-boot has been successfully
ported to EP8248 board.  My board has 128Mbyte SDRAM and 64MB of flash.

 

Thanks,

 

Nguyen 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060201/a2aeedee/attachment.htm 

[U-Boot-Users] (no subject)

[Wolfgang Denk]

Dear Cliff,

your port of U-Boot for the pxa255_idp has been broken since  it  was
added,  without  any  patches  /  fixes  in  my  queue? Are you still
maintaining this board? Or is it broken and orphaned  and  should  be
removed?

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
About the use of language: it is impossible to sharpen a pencil  with
a  blunt  ax.  It is equally vain to try to do it with ten blunt axes
instead.                                           -- Edsger Dijkstra

[U-Boot-Users] (no subject)

[Wolfgang Denk]

In message <C54B5772-835F-47B2-87A3-D528D722C511@freescale.com> you wrote:
> 
> Here's a patch which puts the PHYs for the 3rd and 4th eTSECS into  
> RGMII mode on the 8548 CDS.

This patch does not apply any more against current sources.  Can  you
please verify which parts are still relevant, and resubmit?

Thanks.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A good aphorism is too hard for the tooth of time, and  is  not  worn
away  by  all  the  centuries,  although  it serves as food for every
epoch.                                  - Friedrich Wilhelm Nietzsche
                          _Miscellaneous Maxims and Opinions_ no. 168

[U-Boot-Users] (no subject)

[刘辉]

Hi all:

	i want to build up a linux system with JFFS2. Is there any document show what shell i do in uboot to support JFFS2?

	thanks!

????????liuhuicumt at tom.com
??????????2005-08-22

[U-Boot-Users] (no subject)

[prabhu]

[U-Boot-Users] (no subject)

[Andy Fleming]

Here's a patch which puts the PHYs for the 3rd and 4th eTSECS into  
RGMII mode on the 8548 CDS.


-------------- next part --------------
A non-text attachment was scrubbed...
Name: rgmii_05192005.patch
Type: application/octet-stream
Size: 17197 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20050523/2945e87d/attachment.obj 

[U-Boot-Users] (no subject)

[Wolfgang Denk]

In message <200505111617.AA27328618@RCS-9000.COM> you wrote:
> Yes! My board has the different flash from icecube.Pls tell me which file I have to verify to make U-boot find my flash?

The flash driver in your board directory.

Ummm... you did rad the README, didn't you? Maybe you want to read it
again.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"He was so narrow minded he could see through  a  keyhole  with  both
eyes ..."

[U-Boot-Users] (no subject)

[Wolfgang Denk]

In message <200505111412.AA28574024@RCS-9000.COM> you wrote:
> When I fire up the board,the U-boot reports are as follows:
...
> U-Boot 1.1.2 (May 10 2005 - 08:54:34)                                     
> 
> CPU:   MPC5200 v1.2 at 396 MHz                              
>        Bus 132 MHz, IPB 66 MHz, PCI 33 MHz                                          
> Board: Motorola MPC5200 (IceCube)                                 
> I2C:   85 kHz, ready                    
> DRAM:  32 MB            
> FLASH:  0 kB            
^^^^^^^^^^^^^^
Problem here

> **********************************************************
> Is it ok? What's the problem on "FLASH:  0 kB            
> *** Warning - bad CRC, using default environment     "?
> It can not find my flash on board?

Correct. Seems you don't have an IceCube (aka  Lite5200)  board.  You
will have to port U-Boot to your hartware.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
... bacteriological warfare ... hard to believe we were once foolish
enough to play around with that.
	-- McCoy, "The Omega Glory", stardate unknown

[U-Boot-Users] (no subject)

[zhonglei]

When I fire up the board,the U-boot reports are as follows:
********************************************************
U-Boot 1.1.2 (May 10 2005 - 08:54:34)                                     

CPU:   MPC5200 v1.2 at 396 MHz                              
       Bus 132 MHz, IPB 66 MHz, PCI 33 MHz                                          
Board: Motorola MPC5200 (IceCube)                                 
I2C:   85 kHz, ready                    
DRAM:  32 MB            
FLASH:  0 kB            
*** Warning - bad CRC, using default environment                                                

PCI:   Bus Dev VenId DevId Class Int                                    
        00  1a  1057  5803  0680  00                                    
In:    serial             
Out:   serial             
Err:   serial             
Net:   FEC ETHERNET                   
IDE:   Bus 0: ............................................................** Tim                                                                                
eout **       

Type "run flash_nfs" to mount root filesystem over NFS                                                      

Hit any key to stop autoboot:  0                                
=>  
**********************************************************
Is it ok? What's the problem on "FLASH:  0 kB            
*** Warning - bad CRC, using default environment     "?
It can not find my flash on board?

Best Regards
zhonglei

[U-Boot-Users] (no subject)

[朱成]

hi,
you can use "loadb" from ttySx download img to ram
 

Best regards,
zhucheng

[U-Boot-Users] (no subject)

[zhonglei]

Hi:
   I don't have any ethernet device on my customer board.So I can not load   linux img via TFTP. I have succeeded in running U-boot on my board. But I don't know how to do next to load "img" file into flash to run linux kernel without TFTP.(My flash programmer can only load "bin" file into flash) Please gave me a help! Thanks a lot!

Best Regards

[U-Boot-Users] (no subject)

[Wolfgang Denk]

repl: bad addresses:
	C.Michael Sundius <msundius@sundius.com> -- no at-sign after local-part (Sundius)


FIX YOUR MAILER!!!!



In message <0a998cc8d476962de3099ffa36976db3@sundius.com> you wrote:
> 
> what kernel do you use? what version of jffs?

No. This is useless. Don't ask for a  list  of  50  different  kernel
versions with 30 different versions of MTD code which are all wokring
in any combination.

Provide some useful, reproducable information yourself.


Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A stone was placed at a ford in a river with the inscription:
"When this stone is covered it is dangerous to ford here."

[U-Boot-Users] (no subject)

[C. Michael Sundius]

scott,

what kernel do you use? what version of jffs?


On Mar 31, 2005, at 2:52 PM, Scott McNutt wrote:

> Hi Michael,
>
>> anyway, if anyone who has some experience with using JFFS2
> > in concert w/ u-boot could respond,
>
> I use it ... on several boards ... MPC8270 & Nios-II ...
> with Bluecat Linux (PPC) and uClinux (Nios-II).
>
> It works ... without fuss or problems for me :-)
>
> Regards,
> --Scott
>
>
C Michael Sundius
Brown Bear Realty
303 Cortland Ave
San Francisco, CA 94110
(415)608-0121
realtor at sundius.com

[U-Boot-Users] (no subject)

[Scott McNutt]

Hi Michael,

> anyway, if anyone who has some experience with using JFFS2
 > in concert w/ u-boot could respond,

I use it ... on several boards ... MPC8270 & Nios-II ...
with Bluecat Linux (PPC) and uClinux (Nios-II).

It works ... without fuss or problems for me :-)

Regards,
--Scott

[U-Boot-Users] (no subject)

[Woodruff, Richard]

I used it about a year ago with NAND flash.  For NOR the usage is a bit
less compelling.  As the scan time is slow, you end up using an extra
partition for it anyway to keep the time down...might have almost been
in raw at that point for nor.  Yaffs may be useable now for nand, but
don't think anyone has ported it in at the loader yet...

Some of the upsides is you can update using nice file based things at
the kernel level if jffs is there, and if you have the time to wait on
boot, then you can put it all in a big partition.

Regards,
Richard W.

> -----Original Message-----
> From: u-boot-users-admin at lists.sourceforge.net [mailto:u-boot-users-
> admin at lists.sourceforge.net] On Behalf Of C.Michael Sundius
> Sent: Thursday, March 31, 2005 4:32 PM
> To: u-boot-users at lists.sourceforge.net
> Subject: [U-Boot-Users] (no subject)
> 
> Hi,
> 
> sorry to be a pest,  A while ago I posted a message asking about
> support for JFFS2 within U-boot.
> 
> I didn't get a response so I'm wondering if anyone uses this feature?
> in reading the code, it seems
> as though there are many comments indicating that the support is a
> "less than elegant" implementation.
> (to be more specific they say have a paper bag ready in case you have
> to puke :]
> 
> that said, does anyone use this feature.. it seems to me that it is
> very useful to have and many would
> want it.. on the other hand I know that the JFFS2 people have moved
> forward and don't support older
> kernels and thus maybe this code is out of date.. or (more likely) my
> kernel is out of date.
> 
> anyway, if anyone who has some experience with using JFFS2 in concert
> w/ u-boot could respond,
> I would be very grateful
> 
> btw: the problems I am having seem to be related to reading symbolic
> links.
> 
> thanks for you help
> 
> 
> 
> C Michael Sundius
> Solico Group LLC
> 232 Nevada St
> San Francisco, CA 94110
> msundius at sundius.com
> (415)608-0121
> 
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by Demarc:
> A global provider of Threat Management Solutions.
> Download our HomeAdmin security software for free today!
> http://www.demarc.com/info/Sentarus/hamr30
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users

[U-Boot-Users] (no subject)

[C. Michael Sundius]

Hi,

sorry to be a pest,  A while ago I posted a message asking about 
support for JFFS2 within U-boot.

I didn't get a response so I'm wondering if anyone uses this feature? 
in reading the code, it seems
as though there are many comments indicating that the support is a 
"less than elegant" implementation.
(to be more specific they say have a paper bag ready in case you have 
to puke :]

that said, does anyone use this feature.. it seems to me that it is 
very useful to have and many would
want it.. on the other hand I know that the JFFS2 people have moved 
forward and don't support older
kernels and thus maybe this code is out of date.. or (more likely) my 
kernel is out of date.

anyway, if anyone who has some experience with using JFFS2 in concert 
w/ u-boot could respond,
I would be very grateful

btw: the problems I am having seem to be related to reading symbolic 
links.

thanks for you help



C Michael Sundius
Solico Group LLC
232 Nevada St
San Francisco, CA 94110
msundius at sundius.com
(415)608-0121

[U-Boot-Users] (no subject)

[SDI.-]

hello,
I?m developing under Linux 2.6.10 on the Atmel At91RM9200EK Evaluation Kit.
Now I want to bring up U-Boot 1.1.2 on the external Dataflash (AT45DB642).
I have a running (uncompressed!) U-Boot 1.1.2 on my parallel flash
(AT49BV6416), but I can?t erase
the externel dataflash. Do I need the nand utility in my u-boot commands?
Which settings are recommended in which header files to get my external
flash working?

any help would be appreciated, regards
Sascha Dikhoff
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20050302/6b67ef2b/attachment.htm 

[U-Boot-Users] (no subject)

[Wolfgang Denk]

In message <4bdc54b005020705577ecf6861@mail.gmail.com> you wrote:
> 
> i'm starting to use u-boot for the first time. But i encounter a lot
> of dificulties.

I see. It seems your first problem is that you don't understand  how
to enter a subject in the mailer?

> The first problem is that i can't find my evaluation board in config
> files. how i can build u-boot withou this file?

If ther eis no config file, then there is probably no  port  yet.  In
this case you will have to port U-Boot.

> Need i to write my board configuration?

Yes, and all the rest which is necesary to complete a port.

> what memery is needeed to uboot? i want to put it in flash memory.

memery = memory? U-Boot needs some ROM (flash is fine) and RAM to run.

> i want to load linux via Ethernet and write into Flash memory, how i do it?

Read the manual and the FAQ.

> Thanks to give me some explanations, because english is not my
> language, and it is very difficult to find documentations in french.

We will try to help independent of your language skills. However, you
_are_ supposed to read the documentation (README, manual,  FAQ).  And
before posting.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Peace was the way.
	-- Kirk, "The City on the Edge of Forever", stardate unknown

[U-Boot-Users] (no subject)

[Bruce]

Hello!

i'm starting to use u-boot for the first time. But i encounter a lot
of dificulties.
Is there someone who can help me?. please

The first problem is that i can't find my evaluation board in config
files. how i can build u-boot withou this file?
my board is a Memec Virtex II Pro, xc2vp20-ff1152.

Need i to write my board configuration?

what memery is needeed to uboot? i want to put it in flash memory.
i want to load linux via Ethernet and write into Flash memory, how i do it?


Thanks to give me some explanations, because english is not my
language, and it is very difficult to find documentations in french.

John!

[U-Boot-Users] (no subject)

[George G. Davis]

On Fri, Jan 28, 2005 at 04:03:03PM +0530, Pankaj GOYAL wrote:
> Hi,
>    I m using the u-boot for am arm-926ejs based 
> architechture.In my board I only have a nand flash of 32 MB 
> and my system support the automatic reading the bootloader 
> to RAM from NAND and jump to that location in memeory.But it 
> support only 16KB of bootloader.So I want to minimize the 
> size of my bootloader to around 16Kb.I want only the support 
> of Nand flash and the jffs2 file system support.I do not 
> even want the consol support.Can any one please tell me how 
> to reduced the size of u-boot image.

16KB is large enough to install an "Initial Program Loader" which serves
the task of loading a more feature full bootloader or the OS itself but
not much more than that. Search the U-Boot mailing archives for arguments
against reducing the size of U-Boot, it's been asked many times
before. Besides, most vedors provide NAND flash IPL source code
which does what you want already. So why bother trying to gut
U-Boot to bare essentials when your vendor probably already
supplies that code?

--
Regards,
George
> 
> 
> Thanks
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
> Tool for open source databases. Create drag-&-drop reports. Save time
> by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
> Download a FREE copy at http://www.intelliview.com/go/osdn_nl
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users

[U-Boot-Users] (no subject)

[Wolfgang Denk]

In message <20050131121836.10368.qmail@webmail32.rediffmail.com> you wrote:
> 
>   =0Ahello all,=0Ai am new to embedded systems.=0Ai am trying to build a to=
> ol chain using binutils-2.14, gcc-3.3.2, glibc-2.3.2. All are downloaded fr=
> om kegel.com.=0A=0Ai built successfully the binutils.=0Awhen i trying to bu=
> ilt the gcc, i face the errors.=0Ai configured gcc using the following comm=

Please learn netiquette.

First provide a meaningful subject.

Then fix your mailer to post plaintext only.

Then find a mailing list where your request might be on topic.


This is the U-Boot mailing list. Your question is absolutely off topic here.

> --Next_1107173915---0-203.199.83.32-10234
> Content-type: text/html;
> 	charset=iso-8859-1
> Content-Transfer-Encoding: quoted-printable
> Content-Disposition: inline
> 
> <P>=0A&nbsp; <BR>=0Ahello all,<BR>=0Ai am new to embedded systems.<BR>=0Ai =
> am trying to build a tool chain using binutils-2.14, gcc-3.3.2, glibc-2.3.2=

And NEVER post HTML to this list.


Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The high cost of living hasn't affected its popularity.

[U-Boot-Users] (no subject)

[sudheer rao anmol]

  
hello all,
i am new to embedded systems.
i am trying to build a tool chain using binutils-2.14, gcc-3.3.2, glibc-2.3.2. All are downloaded from kegel.com.

i built successfully the binutils.
when i trying to built the gcc, i face the errors.
i configured gcc using the following command.

gcc-3.3.2#./configure --prefix=/usr/local/ --enable-version-specific-runtime-libs 
--enable-threads=posix --enable-shared
--enable-languages=c,c++,f77,objc,java,ada --enable-libgcj
--with-gc=simple --enable-nls  --enable-interpreter --with-libiconv-prefix=/usr/local/libiconv-1.8


This command is obtained from  http://gcc.gnu.org/ml/gcc/2003-11/msg00690.html  (given in a README file)

Here it got configured and when i gave make all the following error appears.
***********
In file included from tconfig.h:22,
                 from libgcc2.c:36:
config/rs6000/linux.h:89:20: signal.h: No such file or directory
In file included from tconfig.h:22,
                 from libgcc2.c:36:
config/rs6000/linux.h:98: error: parse error before "stack_t"
config/rs6000/linux.h:98: warning: no semicolon at end of struct or union
config/rs6000/linux.h:100: error: parse error before "uc_sigmask"
config/rs6000/linux.h:100: warning: type defaults to `int' in declaration of `uc_sigmask'
config/rs6000/linux.h:100: warning: data definition has no type or storage classconfig/rs6000/linux.h:99: error: storage size of `uc_mcontext' isn't known
make[2]: *** [libgcc/./_muldi3.o] Error 1
make[2]: Leaving directory `/home/sudheer/ToolChain/Kegel_Test/gcc-3.3.2/gcc'
make[1]: *** [stmp-multilib] Error 2
make[1]: Leaving directory `/home/sudheer/ToolChain/Kegel_Test/gcc-3.3.2/gcc'
make: *** [all-gcc] Error 2
[root at asudheer gcc-3.3.2]#
************************
Please kindly suggest me what to do and how to proceed.

thanks and regards
sudheer


sudheer A
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20050131/0f655520/attachment.htm 

[U-Boot-Users] (no subject)

[Pankaj GOYAL]

Hi,
   I m using the u-boot for am arm-926ejs based 
architechture.In my board I only have a nand flash of 32 MB 
and my system support the automatic reading the bootloader 
to RAM from NAND and jump to that location in memeory.But it 
support only 16KB of bootloader.So I want to minimize the 
size of my bootloader to around 16Kb.I want only the support 
of Nand flash and the jffs2 file system support.I do not 
even want the consol support.Can any one please tell me how 
to reduced the size of u-boot image.


Thanks

[U-Boot-Users] (no subject)

[richard at uclinux.net]

Damned...

Always be careful in "replying" since some people use
"u-boot-users-admin" as recipient like this "Yanjun Luo"
guy from freescale...*gggrrrr



Never mind...PCMCIA/CF card runs fine on Opus103 board now.
Problem was that I had to reverse engineer the CPLD design
on the board since com2gether won't disclose it but I will (o;


U-Boot 1.1.2 (Dec 27 2004 - 18:19:16)

CPU:   MPC852TxxZPnn at 50 MHz [40.0...50.0 MHz]
       4 kB I-Cache 4 kB D-Cache FEC present
Board: Opus103
DRAM:  16 MB
FLASH:  8 MB
In:    serial
Out:   serial
Err:   serial
Net:   FEC ETHERNET
PCMCIA: 3.3V card found: Apacer CF64MB
            Fixed Disk Card
            IDE interface 
            [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
Bus 0: OK 
  Device 0: Model: APACER_CF_64MB Firm: verB.65 Ser#: 02-86912507
            Type: Removable Hard Disk
            Capacity: 61.7 MB = 0.0 GB (126464 x 512)                                      
opus103> 



nice evening from .fi
rick

[U-Boot-Users] (no subject)

[Mark Rakes]

I've used e1000, dp83815, and dp83820 PCI cards on the Sandpoint
with an mpc8245. All 3 of those drivers are polling based, and need
no interrupts.

hth,
-mark


On Oct 7, 2004, at 9:55 AM, Eren Gurses wrote:

>
> Hello,
> I am new to u-boot, but have experience with high-level programming on
> Linux desktop. But this is my first time to deal with device drivers 
> and
> flash programming kind of issues. Please forgive my possible naive
> questions concerning to low level hardware and kernel concepts...
>
> We have sandpoint board with mpc8245 CPU. Our goal is to plug-in and 
> run
> an ethernet card on the PCI bus(specifically Digital DC2114x ethernet,
> surely it is supported in u-boot).
>
> I have been debugging the u-boot for a while, and I concluded that it 
> may
> be due to interrupt problems(but I may be totally wrong). And when I 
> saw
> that interrupt routines in cpu/824x/interrupt.c is not implemented 
> yet, I
> thought that "Yeahh, I found the problem". Then I saw Mr. Denk's 
> following
> mail, then I confused about the situation.
>
> Does u-boot communicate with any hardware on PCI bus without using
> interrupts. Is this the common way for u-boot (I mean u-boot ports for
> different architectures, especially comparing with prort for the 
> mpc824x
> arch.).
>
> By the way, I have to say that leds on the ethernet card did never 
> blink
> under u-boot. (Obviously it is running/blinking on some other Linux 
> PC's).
> Does it mean something informative (except that it doesn't work)...
>
> I am completely stucked at this point. Any kind of help is very 
> appreciated.
> Thanks in advance...
>
> --Eren
>
>
>  In message <001201c362f9$aaf09c60$240110ac@jsbae> you wrote:
>>
>> i use mpc824x and U-Boot ..
>> is there someone who used external interrupt to the mpc824x platform??
>> how can i setting EPIC for use external interrupt.
>
>  U-Boot has little (or no) need for interrupts at  all.  What  exactly
>  are you trying to do?
>
>  Best regards,
>
>  Wolfgang Denk
>
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: IT Product Guide on 
> ITManagersJournal
> Use IT products in your business? Tell us what you think of them. Give 
> us
> Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out 
> more
> http://productguide.itmanagersjournal.com/guidepromo.tmpl
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users

[U-Boot-Users] (no subject)

[Wolfgang Denk]

In message <24857.212.50.56.195.1097168150.squirrel@new.host.name> you wrote:
> 
> Does u-boot communicate with any hardware on PCI bus without using
> interrupts. Is this the common way for u-boot (I mean u-boot ports for
> different architectures, especially comparing with prort for the mpc824x
> arch.).

Normally U-Boot uses polled drivers only,  i.  e.  it  does  not  use
interrupts.

> By the way, I have to say that leds on the ethernet card did never blink
> under u-boot. (Obviously it is running/blinking on some other Linux PC's).
> Does it mean something informative (except that it doesn't work)...

It may mean anything. For example,  you  might  have  missed  to  add
DC2114x support to your configuration file.


Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
If I don't document something, it's usually either for a good reason,
or a bad reason.  In this case it's a good reason.  :-)
                 - Larry Wall in <1992Jan17.005405.16806@netlabs.com>

[U-Boot-Users] (no subject)

[Eren Gurses]

Hello,
I am new to u-boot, but have experience with high-level programming on
Linux desktop. But this is my first time to deal with device drivers and
flash programming kind of issues. Please forgive my possible naive
questions concerning to low level hardware and kernel concepts...

We have sandpoint board with mpc8245 CPU. Our goal is to plug-in and run
an ethernet card on the PCI bus(specifically Digital DC2114x ethernet,
surely it is supported in u-boot).

I have been debugging the u-boot for a while, and I concluded that it may
be due to interrupt problems(but I may be totally wrong). And when I saw
that interrupt routines in cpu/824x/interrupt.c is not implemented yet, I
thought that "Yeahh, I found the problem". Then I saw Mr. Denk's following
mail, then I confused about the situation.

Does u-boot communicate with any hardware on PCI bus without using
interrupts. Is this the common way for u-boot (I mean u-boot ports for
different architectures, especially comparing with prort for the mpc824x
arch.).

By the way, I have to say that leds on the ethernet card did never blink
under u-boot. (Obviously it is running/blinking on some other Linux PC's).
Does it mean something informative (except that it doesn't work)...

I am completely stucked at this point. Any kind of help is very appreciated.
Thanks in advance...

--Eren


 In message <001201c362f9$aaf09c60$240110ac@jsbae> you wrote:
 >
 > i use mpc824x and U-Boot ..
 > is there someone who used external interrupt to the mpc824x platform??
 > how can i setting EPIC for use external interrupt.

 U-Boot has little (or no) need for interrupts at  all.  What  exactly
 are you trying to do?

 Best regards,

 Wolfgang Denk

[U-Boot-Users] (no subject)

[Eren Gurses]

[U-Boot-Users] (no subject)

[Richard Dong]

u-boot-users at lists.sourceforge.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20040930/c9410124/attachment.htm 

[U-Boot-Users] (no subject)

[Wolfgang Denk]

In message <E1CBk2d-0000cF-Uu@sc8-sf-mx2.sourceforge.net> you wrote:
> aGVsbG8gZXZlcnlvbmUgDQogICAgIGkgaGF2ZSBzb21lIHF1ZXN0aW9uIGFib3V0IHUtYm9vdA0K
> ICAgICAgMaGiaW4gdGhlIGNvbmZpZ3VyYXRpb25zICAgd2hhdCBtZWFucyBvZiBLR0RCIGJhdWRy
> YXRlID8NCiAgICAgIDKhomluIHRoZSAgZXA3MzEyLmggIGF1dGhvciBkZWZpbmVkIHNvbWUgY29u
> ZmlndXJhdGlvbiBzdWNoIGFzIENGR19MT0FEX0FERFIsIGkgZm91bmQgdGhlc2UgY29uZmlndXJh
> dGlvbiBhcmVuJ3QgZGVmaW5lZCBpbiB0aGUgcmVhZG1lIHRoYXQgdGVsbHMgbWUgaG93IHRvIGRl
> ZmluZSBjb25maWd1cmF0aW9uLg0KICAgICAgDQoNCgkNCg0KoaGhoaGhoaGhoaGhoaGhodbCDQrA
> 8aOhDQogCQkJCQ0KDQqhoaGhoaGhoaGhoaGhoaGhzuKx+A0KoaGhoaGhoaGhoaGhoaGhoXNkdXN0
> aGQyMDAwQHlhaG9vLmNvbS5jbg0KoaGhoaGhoaGhoaGhoaGhoaGhoaEyMDA0LTA5LTI3DQo=


Please do not send base 64 encoded messages.

Please do not send HTML messages.

Please send plain text only.

Message unreadable, ignored. Sorry.

[U-Boot-Users] (no subject)

[Marc Leeman]

Dude, 

On Mon, 27 Sep 2004 09:10:59 +0800, ?? <sdusthd2000@yahoo.com.cn> wrote:
>

fix your mailer-setup. I keep getting empty mails.

-- 
ash nazg durbatul?k, ash nazg gimbatul,
ash nazg thrakatul?k agh burzum-ishi krimpatul

[U-Boot-Users] (no subject)

[吴兵]

hello everyone 
     i have some question about u-boot
      1?in the configurations   what means of KGDB baudrate ?
      2?in the  ep7312.h  author defined some configuration such as CFG_LOAD_ADDR, i found these configuration aren't defined in the readme that tells me how to define configuration.
      

	

?????????
??
 				

??????????
????????sdusthd2000 at yahoo.com.cn
??????????2004-09-27

[U-Boot-Users] (no subject)

[Ravi A]

An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20040925/e15c26b8/attachment.htm 

[U-Boot-Users] (no subject)

[Wolfgang Denk]

In message <207EE0F3DFEED4119B0100508B441B36015864C1@agni.dsil.danlawinc.com> you wrote:
> 
> (no subject)

Please always provide a meaningful subject when  posting  to  mailing
lists.

> For our custom board, based on AT91RM9200, we wants to use
> u-boot as a Linux bootloader.  We do not want to use any
> commercial software and hardware tools to program it.  We

No tools, he? Why do you want to make your life painful?

> u-boot to serial flash.  It is a two step process, first load
> an application called 'romboot.bin' then load the u-boot.  It
> seems 'romboot.bin' does preliminary set up, to load the u-boot

> image to serial flash.  The 'romboot.bin' image is built
> for the Atmel board.

... and is what you would probably call "commercial software"  ("pro-
prietary" or "non-free" are probably better desriptions).

> 1.
> Can I get the sources of this 'romboot.bin' or of similar
> program, that can be built with GNU tools of ARM?

Not here. Feel free to ask Atmel.

> 2.
> A Metrowerks project of 'romboot.bin' is available, but it uses
> some libraries (for example to have printf and scanf etc.) which

Feel free to ask Metrowerks, then.

> are not included in the project.  Is there any way I can compile
> it with GNU tools to make the complete application of
> 'romboot.bin'?

This is off topic here.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
"Unibus timeout fatal trap program lost sorry"  -  An  error  message
printed by DEC's RSTS operating system for the PDP-11

[U-Boot-Users] (no subject)

[chandrag at danlawinc.com]

Hi,

For our custom board, based on AT91RM9200, we wants to use
u-boot as a Linux bootloader.  We do not want to use any
commercial software and hardware tools to program it.  We
want to put the u-boot in the serial flash, connected to
the controller on SPI.

I found a document (doc6067.pdf) from Atmel on how to load the
u-boot to serial flash.  It is a two step process, first load
an application called 'romboot.bin' then load the u-boot.  It
seems 'romboot.bin' does preliminary set up, to load the u-boot
image to serial flash.  The 'romboot.bin' image is built
for the Atmel board.

1.
Can I get the sources of this 'romboot.bin' or of similar
program, that can be built with GNU tools of ARM?

2.
A Metrowerks project of 'romboot.bin' is available, but it uses
some libraries (for example to have printf and scanf etc.) which
are not included in the project.  Is there any way I can compile
it with GNU tools to make the complete application of
'romboot.bin'?

Thanks in advance.

regards,
chandra


* * * * * * * * * * * *
Information contained in this electronic mail transmission is confidential
and intended to be sent only to the stated recipient of the transmission. If
you are not the intended recipient, you are hereby notified that any review,
use, dissemination, distribution or copying of this communication is
strictly prohibited. You are also asked to notify us immediately and to
delete this transmission with any attachments and destroy all copies in any
form. Thankyou.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20040730/74cef602/attachment.htm 

[U-Boot-Users] (no subject)

[Vidya S]

hi,

i am using smc driver for blackfin processor. it working fine. i am not sure of the question u have asked.
i mean, i havent done any change other than what has been released by you. i havent added any init in eth.c

regards
vidya

-----Original Message-----
From: u-boot-users-admin@lists.sourceforge.net
[mailto:u-boot-users-admin at lists.sourceforge.net]On Behalf Of Wolfgang
Kanovsky
Sent: Thursday, May 13, 2004 9:37 PM
To: U-Boot-Users
Subject: [U-Boot-Users] (no subject)
Importance: High



Hi
anyone here who knows how the CONFIG_DRIVER_SMC91111  is used ..when the
chip is on the ISA - BUS

mean it is not in the eth.c file for init ( i have configured it in the
board.h file ...)?

greets
Wolfgang K.



-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

[U-Boot-Users] (no subject)

[Wolfgang Kanovsky]

Hi
anyone here who knows how the CONFIG_DRIVER_SMC91111  is used ..when the
chip is on the ISA - BUS

mean it is not in the eth.c file for init ( i have configured it in the
board.h file ...)?

greets
Wolfgang K.

[U-Boot-Users] (no subject)

[Alan J. Luse]

Previous patch attachment had stray white space; apologies :-)

The MII PHY utility (common/miiphyutil.c) does not report network speed
and duplex mode properly if auto-negotiate is not enabled.  The attached
patch checks if auto-negotiate is enabled and looks in the proper
registers based on that bit to return speed and duplex values.

* Patch by Alan J. Luse, 29 Apr 2004:
  Report MII network speed and duplex setting properly when
auto-negotiate
  is not enabled.

Alan J. Luse
Embedded Systems Engineer
Time America, Inc.
51 West Third Street, Suite 310
Tempe, AZ 85281
Voice:  (480) 296-0408
Fax:  (480) 296-0444
-------------- next part --------------
A non-text attachment was scrubbed...
Name: u-boot-1.1.1.miiphyutil.diff
Type: application/octet-stream
Size: 2286 bytes
Desc: u-boot-1.1.1.miiphyutil.diff
Url : http://lists.denx.de/pipermail/u-boot/attachments/20040429/f6e91209/attachment.obj 

[U-Boot-Users] (no subject)

[Alan J. Luse]

John-

Arabella software has done a build of U-Boot for the Motorola MPC885ADS
board.  I have a working binary from Arabella.  I am in the process of
building my own adaptation for our hardware; the  DUET_ADS_config in the
current release version is supposed to build for the MPC885ADS.

Alan J. Luse
Embedded Systems Engineer
Time America, Inc.
51 West Third Street, Suite 310
Tempe, AZ 85281
Voice:  (480) 296-0408
Fax:  (480) 296-0444


-----Original Message-----
From: u-boot-users-admin@lists.sourceforge.net
[mailto:u-boot-users-admin at lists.sourceforge.net] On Behalf Of Kerl,
John
Sent: Friday, 16 April 2004 2:30 PM
To: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] (no subject)


Is anyone starting work on 885 support?  We have an 885 board coming up
very soon, so I will be happy to help out.


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id\x1470&alloc_id638&op=ick
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

[U-Boot-Users] (no subject)

[Kerl, John]

Is anyone starting work on 885 support?  We have an 885 board
coming up very soon, so I will be happy to help out.

[U-Boot-Users] (no subject)

[listmember at orkun.us]

Wolfgang,

I am attaching the gzip compressed patch for Cogent CSB272 board.

This is based on CVS version of u-boot (checked out today: Feb 10)

Best regards,
Tolunay Orkun
-------------- next part --------------
A non-text attachment was scrubbed...
Name: csb272.patch.gz
Type: application/x-gzip
Size: 9319 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20040210/3f533364/attachment.bin 

[U-Boot-Users] (no subject)

[Wolfgang Denk]

In message <1538.81.227.175.195.1076440809.squirrel@webmail.unisite.se> you wrote:
>
> I built u-boot 1.0.1 with the new MontaVista Professional Edition 3.1, Dev
> Rocket Environment. It went well and I succeeded to flash the code to a
> Motorola Evaluation board ( PQ2FADS-VR ). However, when I tried to debug
> the code I started in start.S but after the the first jump bl in start.S I
> ended up in a C file that is handling U-boot CLI commands...

Can you prove this with a log of the exact steps you performed?

> I think that the GDB in BDI2000 is a 5.x version and GDB in the MontaVista
> Professional Edition 3.1 is a 6.0 version ( Gcc 3.3.2 ).

There is no "GDB in  BDI2000".  The  BDI2000  implements  GDB  remote
protocol   over   TCP/IP.   This  protocol  is  pretty  much  version
independent.

> Do you think that this could be a possible issue or is it only me doing
> some configuration faults?

I guess the later is the case.

Best regards,

Wolfgang Denk

-- 
See us @ Embedded World, Nuremberg, Feb 17 - 19,  Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
What is mind?  No matter.  What is matter?  Never mind.
                                      -- Thomas Hewitt Key, 1799-1875

[U-Boot-Users] (no subject)

[uboot at sundmangroup.com]

Greetings!
I built u-boot 1.0.1 with the new MontaVista Professional Edition 3.1, Dev
Rocket Environment. It went well and I succeeded to flash the code to a
Motorola Evaluation board ( PQ2FADS-VR ). However, when I tried to debug
the code I started in start.S but after the the first jump bl in start.S I
ended up in a C file that is handling U-boot CLI commands...

I think that the GDB in BDI2000 is a 5.x version and GDB in the MontaVista
Professional Edition 3.1 is a 6.0 version ( Gcc 3.3.2 ).

Do you think that this could be a possible issue or is it only me doing
some configuration faults?

Cheers // Matias ( Former matias.sundman at ericsson.com :))

[U-Boot-Users] (no subject)

[Wolfgang Denk]

Dear Muhammad,

in message <8529B5552D4EAA4DAEDF49650C64B2B4371366@tarpon.mangrovesystems.com> you wrote:
>
> I want to add FTP support in u-boot for MPC8270 based system. Was there

Are you really sure you want FTP, not TFTP?

TFTP is already there, just use it.

For FTP you will need a full-blown TCP/IP stack. This  is  a  lot  of
work, and little benefit over TFTP.

> any work done on this front?? 

TFTP yes, FTP no.

Best regards, and a Happy New Year!

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
It is easier to write an incorrect program than understand a  correct
one.

[U-Boot-Users] (no subject)

[Muhammad Sarwar]

Hi:
I want to add FTP support in u-boot for MPC8270 based system. Was there any work done on this front?? 
Any pointers will be appreciated. 

Thanks.


Regards,
?
Muhammad Sarwar
Mangrove Systems Inc.

[U-Boot-Users] (no subject)

[zhaodong]

Dear All,

I am porting U-Boot on a customize board with a IBM PPC405GP embedded processor on it.
At first I encountered a problem that the wait_ticks() function called by udelay() can't work,
and I replaced the assembly wait_ticks()function by a finite c loop(just count a number down). After that every thing seems ok,
until when I boot a linux kernel the kernel hang at "Calibrating delay loop... ".

The time base is configured to use internel CPU clock, 

Before the init_timebase() funciton, I did:

configure the cntr0 and cntr1(CPC0_CR0 and CPC0CR1) with 0x007010c0 and 0x00004000;
configure the EBC 
configure the SDRAM controller
configure OCM at 0xf8000000, and define CFG_TEMP_STACK_OCM
define CONFIG_BOARD_PRE_INIT and configure UIC

init_timebase(use the function in lib_ppc/time.c)
define CONFIG_BOARD_POSTCLK_INIT and init 405 on chip I2C interface, 

here needs the udelay()function, How can I init the time base correctly?

below is the information when I tftpboot a linux kernel image :
...
memsize     = 0x02000000
flashstart  = 0xFE000000
flashsize   = 0x02000000
flashoffset = 0x00000000
sramstart   = 0x00000000
sramsize    = 0x00000000
bootflags   = 0x001E8480
procfreq    = 198.512 MHz
plb_busfreq = 66.512 MHz
pci_busfreq = 33.512 MHz
ethaddr     = 08:00:3E:26:15:59
IP addr     = 192.168.0.199
baudrate    =  38400 bps
No initrd
## Transferring control to Linux (at address 00000000) ...
Linux version 2.4.18_mvl30-walnut (root at RedHat28.accu.com) 
board info structure size 116
RAM start        0x00000000 size 32MByte
FLASH start      0xfe000000 size 32MByte
Baudrate 38400
405GP on 198000000Hz
PLB BUS on 66000000Hz
PCI BUS on 33000000Hz
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,38400 root=/dev/nfs  rw 
Console: colour dummy device 80x25
Calibrating delay loop... 


Is this problem related with the macro CONFIG_CLOCKS_IN_MHZ? or just because the time base is not correctly inititalized ?

Thand you,

Zhaodong
 

[U-Boot-Users] (no subject)

[jxz]

hi, I have successfully compiled u-boot-1.0.0 for my target board, and debbugged it by trace32.How can I debug u-boot to start linux? I do like this, I download u-boot to my target board and download linux at th same time on another SDRAM place. How to make right linux image? I have successfully done those step, make config; make dep; make Image. How u-boot start linux? where it call linux?

Best regards
Dannel Zhang

[U-Boot-Users] (no subject)

[Wolfgang Denk]

Dear Wang Cheng,

in message <47429467b4.467b447429@rails.com.cn> you wrote:
> 
>    Thank you .
>    I'm porting U-Boot to the WindRiver MDP8xx PRO board.Now I think I
> should run the U-Boot on my board in the simpliest way, so I just
> configed the necessary devices like FLASH ,DRAM .
>    I can provide anything I have ,and thank you very very much .The
> include/configs/windriver.h and board/windrive/windriver.c have been
> included in the attachment.The MDP8xx PRO UM is too large to be
> attatched here.

So what do you expect?

You don't provide  any  information  about  the  hardware,  and  some
fragments  of  code  -  do  you by any chance expect that now sombody
volunteers and ports U-Boot to that board, based on zero information,
and for free?


I'm afraid it doesn't work like that.

Please make yourself clear and tell us what you want: on this mailing
list you can get free advice to solve specific problems etc., but  if
you  are  looking for someone who ports U-Boot to your board you will
either have to do it yourself or ask for professional support  (which
is _not_ free).

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
A penny saved is a penny to squander.
- Ambrose Bierce

[U-Boot-Users] (no subject)

[wang cheng]

Dear :
   Thank you .
   I'm porting U-Boot to the WindRiver MDP8xx PRO board.Now I think I 
should run the U-Boot on my board in the simpliest way, so I just 
configed the necessary devices like FLASH ,DRAM .
   I can provide anything I have ,and thank you very very much .The 
include/configs/windriver.h and board/windrive/windriver.c have been 
included in the attachment.The MDP8xx PRO UM is too large to be 
attatched here.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: windriver.c
Type: application/octet-stream
Size: 4006 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20031025/de1821c1/attachment.obj 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: windriver.h
Type: application/octet-stream
Size: 8517 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20031025/de1821c1/attachment-0001.obj 

[U-Boot-Users] (no subject)

[Wolfgang Denk]

In message <76E5F712842F5F49A35738622BAA0F4FDC4095@ESEALNT442.al.sw.ericsson.se> you wrote:
> 
> As I have understood questions about the former ppcboot and
> the new U-boot should be posted on this list?

Right, thanks.

> What happens is that I only get garbage on the terminal
> output screen whatever settings I am using in minicom,
> hyperterminal or /dev/ttyb in solaris..

Wrong settings of baudrate, bits/char, stop bits, parity?

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
The so-called "desktop metaphor" of today's workstations  is  instead
an  "airplane-seat"  metaphor.  Anyone who has shuffled a lap full of
papers while seated between two portly passengers will recognize  the
difference -- one can see only a very few things at once.
                                                   - Fred Brooks, Jr.

[U-Boot-Users] (no subject)

[Matias Sundman]

Hello,
As I have understood questions about the former ppcboot and
the new U-boot should be posted on this list?

I have a problem with the PPCBoot-1.2.0.

What happens is that I only get garbage on the terminal
output screen whatever settings I am using in minicom,
hyperterminal or /dev/ttyb in solaris..

I have a board from BroadCom with mpc824x , I can see in the boards LCD screen that it boots and the garbage that

I have a board from BroadCom with mpc824x , I can see in the boards LCD screen that it boots and the garbage that
comes on the screen seems to have somekind of a pattern
like a five second counter before it tries to download the
linux kernel image...however I cant type in anything because
e.g the enter key gives '-' characters..




Matias Sundman
Senior SW Designer

ERICSSON AB - Public Ethernet Access
Tellusborgsv?gen 90
126 25 Stockholm
S W E D E N

 <<...OLE_Obj...>>   +46 8 719 86 83

[U-Boot-Users] (no subject)

[Wolfgang Denk]

Hi,

I would like to get rid of some obsolete code which is only  good  to
cause confusion:


include/mpc75x.h:

        only referenced in board/eltec/bab7xx/asm_init.S;
	dangerous since it contains broken #defines for BATL_*

	Can I replace this by include/74xx_7xx.h ?

include/mpc74xx.h:

	only referenced in comments in include/configs/ELPPC.h,
	include/configs/EVB64260.h, include/configs/ZUMA.h

	Can I replace this by include/74xx_7xx.h ?


Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
See us @ electronica 2002 in Munich, Nov 12-15, Hall A3, Booth A3.325