I ran across the following under the Yocto Project Profiling and Tracing Manual, and after checking my ipk data files/layout, I was wondering if someone could tell me, if ipk is capable of performing a similar set of operations to install my debug data ?, and if so, what would be the correct command sequence ?

“ The debug packages once built can be found in build/tmp/deploy/rpm/* on the host system. Find the busybox-dbg-...rpm file and copy it to the target. For example:

[trz@empanada core2]$ scp /home/trz/yocto/crownbay-tracing-dbg/build/tmp/deploy/rpm/core2_32/busybox-dbg-1.20.2r2.core2_32.rpm root@192.168.1.31:

     root@192.168.1.31's password:

     busybox-dbg-1.20.2-r2.core2_32.rpm                     100% 1826KB   1.8MB/s   00:01

Now install the debug rpm on the target:

     root@crownbay:~# rpm -i busybox-dbg-1.20.2-r2.core2_32.rpm

“

Thanks,

Steve