Re: [dpdk-dev] [PATCH v2 1/6] net/mlx5: change hairpin queue peer checking

[Slava Ovsiienko <viacheslavo@nvidia.com>]

> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Bing Zhao
> Sent: Thursday, October 22, 2020 17:07
> To: viacheslavo@mellanox.com; matan@mellanox.com
> Cc: dev@dpdk.org; Ori Kam <orika@nvidia.com>; Raslan Darawsheh
> <rasland@nvidia.com>
> Subject: [dpdk-dev] [PATCH v2 1/6] net/mlx5: change hairpin queue peer
> checking
> 
> In the current implementation of single port mode hairpin, the peer queue
> should belong to the same port of the current queue. When the two ports
> hairpin mode is introduced, such checking should be removed to make the
> hairpin queue setup execute successfully since it is not a valid condition
> anymore.
> 
> In the meanwhile, different devices could have different queue configurations.
> The queues number of peer port is unknown to the current device. The
> checking should be removed also.
> 
> If the Tx and Rx port IDs of a hairpin peer are different, only the manual
> binding and explicit Tx flows are supported. Or else, the four combinations of
> modes could be supported. The mode attributes consistency checking will be
> done when connecting the queue with its peer queue.
> 
> Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>

> ---
>  drivers/net/mlx5/mlx5_rxq.c | 23 +++++++++++++++++------
> drivers/net/mlx5/mlx5_txq.c | 23 +++++++++++++++++------
>  2 files changed, 34 insertions(+), 12 deletions(-)