From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pragnesh Patel Date: Tue, 17 Mar 2020 17:30:53 +0000 Subject: [PATCH v5 01/14] misc: add driver for the SiFive otp controller In-Reply-To: References: <20200311070320.21323-1-pragnesh.patel@sifive.com> <20200311070320.21323-2-pragnesh.patel@sifive.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Bin, >-----Original Message----- >From: Bin Meng >Sent: 11 March 2020 15:55 >To: Pragnesh Patel >Cc: U-Boot Mailing List ; Atish Patra >; Palmer Dabbelt ; Paul >Walmsley ; Jagan Teki >; Troy Benjegerdes >; Anup Patel ; Sagar >Kadam ; Rick Chen ; Simon >Glass ; Eugen Hristev ; >Lukasz Majewski ; Heiko Stuebner >; Adam Ford >; Peng Fan ; Finley Xiao >; Tero Kristo ; Kever Yang > >Subject: Re: [PATCH v5 01/14] misc: add driver for the SiFive otp controller > >On Wed, Mar 11, 2020 at 3:03 PM Pragnesh Patel > wrote: >> >> Added a misc driver to handle OTP memory in SiFive SoCs. >> >> Signed-off-by: Pragnesh Patel >> --- >> drivers/misc/Kconfig | 7 ++ >> drivers/misc/Makefile | 1 + >> drivers/misc/sifive-otp.c | 241 >> ++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 249 insertions(+) >> create mode 100644 drivers/misc/sifive-otp.c >> >> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index >> f18aa8f7ba..fcb45c63d4 100644 >> --- a/drivers/misc/Kconfig >> +++ b/drivers/misc/Kconfig >> @@ -68,6 +68,13 @@ config ROCKCHIP_OTP >> addressing and a length or through child-nodes that are generated >> based on the e-fuse map retrieved from the DTS. >> >> +config SIFIVE_OTP >> + bool "SiFive Ememory OTP driver" > >nits: eMemory > >> + depends on RISCV && MISC >> + help >> + Enable support for reading and writing the ememory OTP on >> + the > >nits: eMemory Will update all in v6. > >> + SiFive SoCs. >> + >> config VEXPRESS_CONFIG >> bool "Enable support for Arm Versatile Express config bus" >> depends on MISC >> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index >> 2b843de93c..ee888631b6 100644 >> --- a/drivers/misc/Makefile >> +++ b/drivers/misc/Makefile >> @@ -58,6 +58,7 @@ obj-$(CONFIG_$(SPL_)PWRSEQ) += pwrseq-uclass.o >> obj-$(CONFIG_QFW) += qfw.o >> obj-$(CONFIG_ROCKCHIP_EFUSE) += rockchip-efuse.o >> obj-$(CONFIG_ROCKCHIP_OTP) += rockchip-otp.o >> +obj-$(CONFIG_SIFIVE_OTP) += sifive-otp.o >> obj-$(CONFIG_SANDBOX) += syscon_sandbox.o misc_sandbox.o >> obj-$(CONFIG_SMSC_LPC47M) += smsc_lpc47m.o >> obj-$(CONFIG_SMSC_SIO1007) += smsc_sio1007.o diff --git >> a/drivers/misc/sifive-otp.c b/drivers/misc/sifive-otp.c new file mode >> 100644 index 0000000000..1e6c1a11b2 >> --- /dev/null >> +++ b/drivers/misc/sifive-otp.c >> @@ -0,0 +1,241 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * This is a driver for the eMemory EG004K32TQ028XW01 NeoFuse >> + * One-Time-Programmable (OTP) memory used within the SiFive FU540. >> + * It is documented in the FU540 manual here: >> + * >> +https://www.sifive.com/documentation/chips/freedom-u540-c000- >manual/ >> + * >> + * Copyright (C) 2018 Philipp Hug >> + * Copyright (C) 2018 Joey Hewitt >> + * >> + * Copyright (C) 2020 SiFive, Inc >> + */ >> + >> +/* >> + * The FU540 stores 4096x32 bit (16KiB) values. >> + * Index 0x00-0xff are reserved for SiFive internal use. (first 1KiB) >> + * Right now first 1KB is used to store only serial number. > >nits: 1KiB Will update. > >> + */ >> + >> +#include >> +#include >> +#include >> +#include >> +#include >> + >> +#define BYTES_PER_FUSE 4 >> + >> +#define PA_RESET_VAL 0x00 >> +#define PAS_RESET_VAL 0x00 >> +#define PAIO_RESET_VAL 0x00 >> +#define PDIN_RESET_VAL 0x00 >> +#define PTM_RESET_VAL 0x00 >> + >> +#define PCLK_ENABLE_VAL BIT(0) >> +#define PCLK_DISABLE_VAL 0x00 >> + >> +#define PWE_WRITE_ENABLE BIT(0) >> +#define PWE_WRITE_DISABLE 0x00 >> + >> +#define PTM_FUSE_PROGRAM_VAL BIT(1) >> + >> +#define PCE_ENABLE_INPUT BIT(0) >> +#define PCE_DISABLE_INPUT 0x00 >> + >> +#define PPROG_ENABLE_INPUT BIT(0) >> +#define PPROG_DISABLE_INPUT 0x00 >> + >> +#define PTRIM_ENABLE_INPUT BIT(0) >> +#define PTRIM_DISABLE_INPUT 0x00 >> + >> +#define PDSTB_DEEP_STANDBY_ENABLE BIT(0) >> +#define PDSTB_DEEP_STANDBY_DISABLE 0x00 >> + >> +struct sifive_otp_regs { >> + u32 pa; /* Address input */ >> + u32 paio; /* Program address input */ >> + u32 pas; /* Program redundancy cell selection input */ >> + u32 pce; /* OTP Macro enable input */ >> + u32 pclk; /* Clock input */ >> + u32 pdin; /* Write data input */ >> + u32 pdout; /* Read data output */ >> + u32 pdstb; /* Deep standby mode enable input (active low) */ >> + u32 pprog; /* Program mode enable input */ >> + u32 ptc; /* Test column enable input */ >> + u32 ptm; /* Test mode enable input */ >> + u32 ptm_rep;/* Repair function test mode enable input */ >> + u32 ptr; /* Test row enable input */ >> + u32 ptrim; /* Repair function enable input */ >> + u32 pwe; /* Write enable input (defines program cycle) */ >> +} __packed; > >__packed is not needed Will update. > >> + >> +struct sifive_otp_platdata { >> + struct sifive_otp_regs __iomem *regs; >> + u32 total_fuses; >> +}; >> + >> +/* >> + * offset and size are assumed aligned to the size of the fuses (32bit). > >nits: 32-bit Will update. > >> + */ >> +static int sifive_otp_read(struct udevice *dev, int offset, >> + void *buf, int size) { >> + struct sifive_otp_platdata *plat = dev_get_platdata(dev); >> + struct sifive_otp_regs *regs = (struct sifive_otp_regs >> +*)plat->regs; >> + >> + int fuseidx = offset / BYTES_PER_FUSE; >> + int fusecount = size / BYTES_PER_FUSE; > >Should we check whether offset and size are multiple of BYTES_PER_FUSE? Will add a code for this and update in v6. > >> + u32 fusebuf[fusecount]; > >This utilizes C99 VLA. What is the largest fusecount this function could aspect? >If it's a large one we might have a stack overflow problem. Will add a check here. > >> + >> + /* check bounds */ >> + if (offset < 0 || size < 0) >> + return -EINVAL; >> + if (fuseidx >= plat->total_fuses) >> + return -EINVAL; >> + if ((fuseidx + fusecount) > plat->total_fuses) >> + return -EINVAL; >> + >> + /* init OTP */ >> + iowrite32(PDSTB_DEEP_STANDBY_ENABLE, ®s->pdstb); > >Use writel()? iowrite32() will anyway call writel(), so I think it's fine to use iowrite32() here. > >> + iowrite32(PTRIM_ENABLE_INPUT, ®s->ptrim); >> + iowrite32(PCE_ENABLE_INPUT, ®s->pce); >> + >> + /* read all requested fuses */ >> + for (unsigned int i = 0; i < fusecount; i++, fuseidx++) { >> + iowrite32(fuseidx, ®s->pa); >> + >> + /* cycle clock to read */ >> + iowrite32(PCLK_ENABLE_VAL, ®s->pclk); >> + mdelay(1); >> + iowrite32(PCLK_DISABLE_VAL, ®s->pclk); >> + mdelay(1); >> + >> + /* read the value */ >> + fusebuf[i] = ioread32(®s->pdout); >> + } >> + >> + /* shut down */ >> + iowrite32(PCE_DISABLE_INPUT, ®s->pce); >> + iowrite32(PTRIM_DISABLE_INPUT, ®s->ptrim); >> + iowrite32(PDSTB_DEEP_STANDBY_DISABLE, ®s->pdstb); >> + >> + // copy out > >Should use /* */ comment format Will update. > >> + memcpy(buf, fusebuf, size); >> + >> + return size; >> +} >> + >> +/* >> + * Caution: >> + * OTP can be written only once, so use carefully. >> + * >> + * offset and size are assumed aligned to the size of the fuses (32bit). > >nits: 32-bit Will update. > >> + */ >> +static int sifive_otp_write(struct udevice *dev, int offset, >> + const void *buf, int size) { >> + struct sifive_otp_platdata *plat = dev_get_platdata(dev); >> + struct sifive_otp_regs *regs = (struct sifive_otp_regs >> +*)plat->regs; >> + >> + int fuseidx = offset / BYTES_PER_FUSE; >> + int fusecount = size / BYTES_PER_FUSE; >> + u32 *write_buf = (u32 *)buf; >> + u32 write_data; >> + int i, pas, bit; >> + >> + /* check bounds */ >> + if (offset < 0 || size < 0) >> + return -EINVAL; >> + if (fuseidx >= plat->total_fuses) >> + return -EINVAL; >> + if ((fuseidx + fusecount) > plat->total_fuses) >> + return -EINVAL; >> + >> + /* init OTP */ >> + iowrite32(PDSTB_DEEP_STANDBY_ENABLE, ®s->pdstb); >> + iowrite32(PTRIM_ENABLE_INPUT, ®s->ptrim); >> + >> + /* reset registers */ >> + iowrite32(PCLK_DISABLE_VAL, ®s->pclk); >> + iowrite32(PA_RESET_VAL, ®s->pa); >> + iowrite32(PAS_RESET_VAL, ®s->pas); >> + iowrite32(PAIO_RESET_VAL, ®s->paio); >> + iowrite32(PDIN_RESET_VAL, ®s->pdin); >> + iowrite32(PWE_WRITE_DISABLE, ®s->pwe); >> + iowrite32(PTM_FUSE_PROGRAM_VAL, ®s->ptm); >> + mdelay(1); >> + >> + iowrite32(PCE_ENABLE_INPUT, ®s->pce); >> + iowrite32(PPROG_ENABLE_INPUT, ®s->pprog); >> + iowrite32(PTRIM_ENABLE_INPUT, ®s->ptrim); > >This is already enabled a few lines above, in the /* init OTP */ section. Will check and update. > >> + >> + /* write all requested fuses */ >> + for (i = 0; i < fusecount; i++, fuseidx++) { >> + iowrite32(fuseidx, ®s->pa); >> + write_data = *(write_buf++); >> + >> + for (pas = 0; pas < 2; pas++) { >> + iowrite32(pas, ®s->pas); >> + >> + for (bit = 0; bit < 32; bit++) { >> + iowrite32(bit, ®s->paio); >> + iowrite32(((write_data >> bit) & 1), >> + ®s->pdin); >> + mdelay(1); >> + >> + iowrite32(PWE_WRITE_ENABLE, ®s->pwe); >> + mdelay(1); >> + iowrite32(PWE_WRITE_DISABLE, ®s->pwe); >> + mdelay(1); >> + } >> + } >> + >> + iowrite32(PAS_RESET_VAL, ®s->pas); >> + } >> + >> + /* shut down */ >> + iowrite32(PWE_WRITE_DISABLE, ®s->pwe); >> + iowrite32(PPROG_DISABLE_INPUT, ®s->pprog); >> + iowrite32(PCE_DISABLE_INPUT, ®s->pce); >> + iowrite32(PTM_RESET_VAL, ®s->ptm); >> + >> + iowrite32(PTRIM_DISABLE_INPUT, ®s->ptrim); >> + iowrite32(PDSTB_DEEP_STANDBY_DISABLE, ®s->pdstb); >> + >> + return size; >> +} >> + >> +static int sifive_otp_ofdata_to_platdata(struct udevice *dev) { >> + struct sifive_otp_platdata *plat = dev_get_platdata(dev); >> + int ret; >> + >> + plat->regs = dev_read_addr_ptr(dev); >> + >> + ret = dev_read_u32(dev, "fuse-count", &plat->total_fuses); >> + if (ret < 0) { >> + pr_err("\"fuse-count\" not found\n"); >> + return ret; >> + } >> + >> + return 0; >> +} >> + >> +static const struct misc_ops sifive_otp_ops = { >> + .read = sifive_otp_read, >> + .write = sifive_otp_write, >> +}; >> + >> +static const struct udevice_id sifive_otp_ids[] = { >> + { .compatible = "sifive,fu540-otp" }, > >Based on other existing compatible strings, I think this should be named as >"sifive,fu540-c000-otp". Will update. > >> + {} >> +}; >> + >> +U_BOOT_DRIVER(sifive_otp) = { >> + .name = "sifive_otp", >> + .id = UCLASS_MISC, >> + .of_match = sifive_otp_ids, >> + .ofdata_to_platdata = sifive_otp_ofdata_to_platdata, >> + .platdata_auto_alloc_size = sizeof(struct sifive_otp_platdata), >> + .ops = &sifive_otp_ops, >> +}; >> -- > >Regards, >Bin