All of lore.kernel.org
 help / color / mirror / Atom feed
From: Philip Stewart <philip.stewart.public@gmail.com>
To: iwd@lists.01.org
Subject: Re: DEL_INTERFACE and CMD_SET_CQM failed; Could not register frame watch type 00d0: -95
Date: Mon, 19 Apr 2021 21:41:12 +0100	[thread overview]
Message-ID: <O4WTRQ.I7V6LWH79YWO2@gmail.com> (raw)
In-Reply-To: <2fe3ffc75401a5ce154b87ecafbd9d9a77c7483b.camel@gmail.com>

[-- Attachment #1: Type: text/plain, Size: 10915 bytes --]

Hi James,

Interestingly, I do see them:

src/eapol.c:eapol_handle_ptk_1_of_4() ifindex=3
src/eapol.c:eapol_handle_ptk_3_of_4() ifindex=3

Full debug log attached.

I'm using iwd version 1.12 and iw version 5.9, in Debian bullseye.

Cheers,
Phil

On Mon, 19 Apr, 2021 at 13:10, James Prestwood <prestwoj@gmail.com> 
wrote:
> Hi Philip,
> 
> <snip>
>>  	Supported commands:
>>  		 * set_interface
>>  		 * new_key
>>  		 * join_ibss
>>  		 * set_pmksa
>>  		 * del_pmksa
>>  		 * flush_pmksa
>>  		 * connect
>>  		 * disconnect
> 
> Yes, this appears to be a fullmac card based on the commands it
> supports.
> 
>>  	software interface modes (can always be added):
>>  	interface combinations are not supported
>>  	Device supports scan flush.
>>  	max # scan plans: 1
>>  	max scan plan interval: -1
>>  	max scan plan iterations: 0
>>  	Supported extended features:
> 
> No extended features could be due to an outdated iw version, though my
> thought was that is would support handshake offloading which is
> somewhat old at this point.
> 
> Since its working well for you I wouldn't worry about it, though I am
> somewhat curious how exactly the 4-way handshake is working with a 
> zero
> MAC. Do you by chance see any eapol messages in your IWD logs (running
> in debug mode):
> 
> src/eapol.c:eapol_handle_ptk_1_of_4() ifindex=50
> src/netdev.c:netdev_mlme_notify() MLME notification Unknown(139)
> src/netdev.c:netdev_unicast_notify() Unicast notification 129
> src/netdev.c:netdev_control_port_frame_event()
> src/eapol.c:eapol_handle_ptk_3_of_4() ifindex=50
> 
> Those "handle_ptk_" calls mean the 4-way is happening in userspace. If
> you don't see them then the 4-way is being offloaded to the firmware
> which would make the most sense based on your zero MAC.
> 
>> 
>>  Given it appears to be performing well, I can live with it :)
>> 
>>  All the best,
>>  Phil
>> 
>>  On Mon, 19 Apr, 2021 at 12:06, James Prestwood <prestwoj@gmail.com>
>>  wrote:
>>  > Hi Philip,
>>  >
>>  > On Mon, 2021-04-19 at 19:16 +0100, Philip Stewart wrote:
>>  > >  Hi James,
>>  > >
>>  > >  Thanks for the clarification around DEL_INTERFACE/CQM, that's
>>  > >  reassuring and makes sense!
>>  > >
>>  > >  On the MAC address, yes - /sys/class/ieee80211/phy0/macaddress
>>  > >  reports
>>  > >  all zeros. Would you expect the wl driver to set this?
>>  >
>>  > I would expect that yeah. My only guess is that broadcom-wl is a
>>  > fullmac driver that doesn't set this and handles everything in the
>>  > firmware. You could see what extended features and commands it
>>  > advertises with 'iw list' to verify.
>>  >
>>  > >  n.b. I note that '[iwd]# station wlan0 show' and '# iw wlan0
>>  > > link'
>>  > >  both
>>  > >  successfully report the MAC address for the access point.
>>  > >
>>  > >  Cheers,
>>  > >  Phil
>>  > >
>>  > >  On Mon, 19 Apr, 2021 at 09:07, James Prestwood <
>>  > > prestwoj(a)gmail.com>
>>  > >  wrote:
>>  > >  > Hi Philip,
>>  > >  >
>>  > >  > On Sun, 2021-04-18 at 18:21 +0100, Philip Stewart wrote:
>>  > >  > >  Hello,
>>  > >  > >
>>  > >  > >  I've recently switched from NetworkManager and
>>  > > wpasupplicant to
>>  > >  > >  systemd-networkd and iwd. Whilst everything appears to be
>>  > >  > > working
>>  > >  > >  fine,
>>  > >  > >  I'm curious about some failures reported by iwd:
>>  > >  > >
>>  > >  > >  Apr 18 15:10:32 systemd[1]: Starting Wireless service...
>>  > >  > >  Apr 18 15:10:33 iwd[661]: Wireless daemon version 1.12
>>  > >  > >  Apr 18 15:10:33 systemd[1]: Started Wireless service.
>>  > >  > >  Apr 18 15:10:33 iwd[661]: station: Network configuration 
>> is
>>  > >  > > disabled.
>>  > >  > >  Apr 18 15:10:33 iwd[661]: Wiphy: 0, Name: phy0
>>  > >  > >  Apr 18 15:10:33 iwd[661]:         Permanent Address:
>>  > >  > >  00:00:00:00:00:00
>>  > >  > >  Apr 18 15:10:33 iwd[661]:         Bands: 2.4 GHz 5 GHz
>>  > >  > >  Apr 18 15:10:33 iwd[661]:         Ciphers: CCMP TKIP BIP
>>  > >  > >  Apr 18 15:10:33 iwd[661]:         Supported iftypes: 
>> ad-hoc
>>  > >  > > station
>>  > >  > >  Apr 18 15:10:33 iwd[661]: DEL_INTERFACE failed: Operation
>>  > > not
>>  > >  > >  supported
>>  > >  > >  Apr 18 15:10:33 iwd[661]: Could not register frame watch
>>  > > type
>>  > >  > > 00d0:
>>  > >  > >  -95
>>  > >  > >  Apr 18 15:10:33 iwd[661]: Could not register frame watch
>>  > > type
>>  > >  > > 00d0:
>>  > >  > >  -95
>>  > >  > >  Apr 18 15:10:33 iwd[661]: Could not register frame watch
>>  > > type
>>  > >  > > 00d0:
>>  > >  > >  -95
>>  > >  > >  Apr 18 15:10:33 iwd[661]: Could not register frame watch
>>  > > type
>>  > >  > > 00d0:
>>  > >  > >  -95
>>  > >  > >  Apr 18 15:10:33 iwd[661]: CMD_SET_CQM failed: Operation 
>> not
>>  > >  > > supported
>>  > >  > >  Apr 18 15:10:33 iwd[661]: Could not register frame watch
>>  > > type
>>  > >  > > 00d0:
>>  > >  > >  -95
>>  > >  > >  Apr 18 15:10:33 iwd[661]: Could not register frame watch
>>  > > type
>>  > >  > > 00d0:
>>  > >  > >  -95
>>  > >  > >
>>  > >  > >  Further, I note that in the output of 'networkctl status
>>  > > wlan0',
>>  > >  > > the
>>  > >  > >  WiFi access point MAC address is reported as
>>  > > 00:00:00:00:00:00
>>  > >  > > and
>>  > >  > >  I'm
>>  > >  > >  wondering if this is a consequence of these failures and 
>> if
>>  > >  > > there is
>>  > >  > >  anything I can do about it?
>>  > >  >
>>  > >  > I'm not familiar with the wl driver specifically but I'm
>>  > > guessing
>>  > >  > it
>>  > >  > does not support DEL_INTERFACE/CQM.
>>  > >  >
>>  > >  > This is fine though. In the DEL_INTERFACE case IWD will just
>>  > > use
>>  > >  > the
>>  > >  > interface that already exists on the system. Effectively
>>  > >  > [General].UseDefaultInterface=true.
>>  > >  >
>>  > >  > CQM is also ok as the driver (presumably) manages low RSSI
>>  > > itself
>>  > >  > and
>>  > >  > will roam on its own. At least this is what I would expect.
>>  > >  >
>>  > >  > We pull the permanent address from
>>  > >  > /sys/class/ieee80211/<phy>/macaddress. Is that reporting
>>  > > zero's?
>>  > >  >
>>  > >  > Thanks,
>>  > >  > James
>>  > >  >
>>  > >  > >  Kind regards,
>>  > >  > >  Phil
>>  > >  > >
>>  > >  > >  # lspci -vv -d 14e4:
>>  > >  > >  03:00.0 Network controller: Broadcom Inc. and subsidiaries
>>  > >  > > BCM4322
>>  > >  > >  802.11a/b/g/n Wireless LAN Controller (rev 01)
>>  > >  > >  	Subsystem: Apple Inc. AirPort Extreme
>>  > >  > >  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
>>  > > VGASnoop-
>>  > >  > >  ParErr-
>>  > >  > >  Stepping- SERR- FastB2B- DisINTx-
>>  > >  > >  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>>  > > >TAbort-
>>  > >  > >  <TAbort- <MAbort- >SERR- <PERR- INTx-
>>  > >  > >  	Latency: 0, Cache Line Size: 256 bytes
>>  > >  > >  	Interrupt: pin A routed to IRQ 20
>>  > >  > >  	Region 0: Memory at d3200000 (64-bit, non-prefetchable)
>>  > >  > >  [size=16K]
>>  > >  > >  	Capabilities: [40] Power Management version 3
>>  > >  > >  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>>  > >  > >  PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>  > >  > >  		Status: D0 NoSoftRst+ PME-Enable- DSel=0
>>  > > DScale=2 PME-
>>  > >  > >  	Capabilities: [58] Vendor Specific Information: Len=78
>>  > > <?>
>>  > >  > >  	Capabilities: [e8] MSI: Enable- Count=1/1 Maskable-
>>  > > 64bit+
>>  > >  > >  		Address: 0000000000000000  Data: 0000
>>  > >  > >  	Capabilities: [d0] Express (v1) Endpoint, MSI 00
>>  > >  > >  		DevCap:	MaxPayload 128 bytes, PhantFunc
>>  > > 0,
>>  > >  > > Latency
>>  > >  > >  L0s <4us, L1
>>  > >  > >  unlimited
>>  > >  > >  			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+
>>  > > FLReset-
>>  > >  > >  SlotPowerLimit 0.000W
>>  > >  > >  		DevCtl:	CorrErr- NonFatalErr- FatalErr-
>>  > > UnsupReq-
>>  > >  > >  			RlxdOrd- ExtTag+ PhantFunc- AuxPwr-
>>  > > NoSnoop-
>>  > >  > >  			MaxPayload 128 bytes, MaxReadReq 128
>>  > > bytes
>>  > >  > >  		DevSta:	CorrErr- NonFatalErr- FatalErr-
>>  > > UnsupReq-
>>  > >  > >  AuxPwr- TransPend-
>>  > >  > >  		LnkCap:	Port #0, Speed 2.5GT/s, Width x1,
>>  > > ASPM
>>  > >  > > L0s
>>  > >  > >  L1, Exit Latency
>>  > >  > >  L0s <4us, L1 <64us
>>  > >  > >  			ClockPM+ Surprise- LLActRep- BwNot-
>>  > >  > >  ASPMOptComp-
>>  > >  > >  		LnkCtl:	ASPM L0s L1 Enabled; RCB 64
>>  > > bytes,
>>  > >  > > Disabled-
>>  > >  > >  CommClk+
>>  > >  > >  			ExtSynch- ClockPM+ AutWidDis- BWInt-
>>  > > AutBWInt-
>>  > >  > >  		LnkSta:	Speed 2.5GT/s (ok), Width x1 (ok)
>>  > >  > >  			TrErr- Train- SlotClk+ DLActive-
>>  > > BWMgmt-
>>  > >  > >  ABWMgmt-
>>  > >  > >  	Capabilities: [100 v1] Advanced Error Reporting
>>  > >  > >  		UESta:	DLP- SDES- TLP- FCP- CmpltTO-
>>  > > CmpltAbrt-
>>  > >  > >  UnxCmplt- RxOF-
>>  > >  > >  MalfTLP- ECRC- UnsupReq- ACSViol-
>>  > >  > >  		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO-
>>  > > CmpltAbrt-
>>  > >  > >  UnxCmplt- RxOF-
>>  > >  > >  MalfTLP- ECRC- UnsupReq- ACSViol-
>>  > >  > >  		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO-
>>  > > CmpltAbrt-
>>  > >  > >  UnxCmplt- RxOF+
>>  > >  > >  MalfTLP+ ECRC- UnsupReq- ACSViol-
>>  > >  > >  		CESta:	RxErr- BadTLP- BadDLLP- Rollover-
>>  > >  > > Timeout-
>>  > >  > >  AdvNonFatalErr-
>>  > >  > >  		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover-
>>  > >  > > Timeout-
>>  > >  > >  AdvNonFatalErr+
>>  > >  > >  		AERCap:	First Error Pointer: 00,
>>  > > ECRCGenCap+
>>  > >  > >  ECRCGenEn- ECRCChkCap+
>>  > >  > >  ECRCChkEn-
>>  > >  > >  			MultHdrRecCap- MultHdrRecEn-
>>  > > TLPPfxPres-
>>  > >  > >  HdrLogCap-
>>  > >  > >  		HeaderLog: 00000000 00000000 00000000 00000000
>>  > >  > >  	Capabilities: [13c v1] Virtual Channel
>>  > >  > >  		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>>  > >  > >  		Arb:	Fixed- WRR32- WRR64- WRR128-
>>  > >  > >  		Ctrl:	ArbSelect=Fixed
>>  > >  > >  		Status:	InProgress-
>>  > >  > >  		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1
>>  > >  > >  RejSnoopTrans-
>>  > >  > >  			Arb:	Fixed- WRR32- WRR64- WRR128-
>>  > > TWRR128-
>>  > >  > >  WRR256-
>>  > >  > >  			Ctrl:	Enable+ ID=0 ArbSelect=Fixed
>>  > > TC/VC=ff
>>  > >  > >  			Status:	NegoPending- InProgress-
>>  > >  > >  	Capabilities: [160 v1] Device Serial Number xx-xx-xx-
>>  > > xx-xx-xx-
>>  > >  > >  xx-xx
>>  > >  > >  	Capabilities: [16c v1] Power Budgeting <?>
>>  > >  > >  	Kernel driver in use: wl
>>  > >  > >  	Kernel modules: ssb, wl
>>  > >  > >
>>  > >  > >
>>  > >  > >  _______________________________________________
>>  > >  > >  iwd mailing list -- iwd(a)lists.01.org
>>  > >  > >  To unsubscribe send an email to iwd-leave(a)lists.01.org
>>  > >
>>  > >
>> 
>> 
> 


[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: iwd_debug.log --]
[-- Type: text/x-log, Size: 10286 bytes --]

# /usr/libexec/iwd --debug
Wireless daemon version 1.12
src/main.c:main() Using configuration directory /etc/iwd
src/storage.c:storage_create_dirs() Using state directory /var/lib/iwd
src/main.c:nl80211_appeared() Found nl80211 interface
src/module.c:iwd_modules_init() 
station: Network configuration is disabled.
src/wsc.c:wsc_init() 
src/eap.c:__eap_method_enable() 
src/eap-wsc.c:eap_wsc_init() 
src/eap-md5.c:eap_md5_init() 
src/eap-tls.c:eap_tls_init() 
src/eap-ttls.c:eap_ttls_init() 
src/eap-mschapv2.c:eap_mschapv2_init() 
src/eap-sim.c:eap_sim_init() 
src/eap-aka.c:eap_aka_prime_init() 
src/eap-aka.c:eap_aka_init() 
src/eap-peap.c:eap_peap_init() 
src/eap-gtc.c:eap_gtc_init() 
src/eap-pwd.c:eap_pwd_init() 
src/manager.c:manager_wiphy_dump_callback() New wiphy phy0 added (0)
Wiphy: 0, Name: phy0
	Permanent Address: 00:00:00:00:00:00
	Bands: 2.4 GHz 5 GHz
	Ciphers: CCMP TKIP BIP
	Supported iftypes: ad-hoc station
src/manager.c:manager_interface_dump_callback() 
src/manager.c:manager_get_interface_cb() 
src/manager.c:manager_get_interface_cb() 
src/wiphy.c:wiphy_update_reg_domain() New reg domain country code for (global) is 00
src/manager.c:manager_del_interface_cb() 
DEL_INTERFACE failed: Operation not supported
src/manager.c:manager_use_default() 
src/netdev.c:netdev_create_from_genl() Created interface wlan0[3 1]
src/netdev.c:netdev_cqm_rssi_update() 
Could not register frame watch type 00d0: -95
Could not register frame watch type 00d0: -95
src/netdev.c:netdev_link_notify() event 16 on ifindex 3
src/netdev.c:netdev_set_4addr() netdev: 3 use_4addr: 0
src/netdev.c:netdev_initial_up_cb() Interface 3 initialized
src/station.c:station_enter_state() Old State: disconnected, new state: autoconnect_quick
src/wiphy.c:wiphy_radio_work_insert() Inserting work item 1
src/wiphy.c:wiphy_radio_work_next() Starting work item 1
src/wsc.c:wsc_add_station() Simple Configuration isn't supported by ifindex 3
Could not register frame watch type 00d0: -95
Could not register frame watch type 00d0: -95
CMD_SET_CQM failed: Operation not supported
src/manager.c:manager_config_notify() Notification of command Set Interface(6)
Could not register frame watch type 00d0: -95
src/scan.c:scan_notify() Scan notification Trigger Scan(33)
src/scan.c:scan_request_triggered() Passive scan triggered for wdev 1
src/station.c:station_quick_scan_triggered() Quick scan triggered for wlan0
Could not register frame watch type 00d0: -95
src/wiphy.c:wiphy_reg_notify() Notification of command Reg Beacon Hint(42)
src/wiphy.c:wiphy_reg_notify() Notification of command Reg Beacon Hint(42)
src/netdev.c:netdev_link_notify() event 16 on ifindex 3
src/wiphy.c:wiphy_reg_notify() Notification of command Reg Beacon Hint(42)
src/scan.c:scan_notify() Scan notification New Scan Results(34)
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:scan_parse_bss_information_elements() Load: 193/255
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:scan_parse_bss_information_elements() Load: 140/255
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:scan_parse_bss_information_elements() Load: 56/255
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:scan_parse_bss_information_elements() Load: 56/255
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:scan_parse_bss_information_elements() Load: 84/255
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:scan_parse_bss_information_elements() Load: 75/255
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:scan_parse_bss_information_elements() Load: 20/255
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:scan_parse_bss_information_elements() Load: 16/255
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:scan_parse_bss_information_elements() Load: 2/255
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:scan_parse_bss_information_elements() Load: 2/255
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:scan_parse_bss_information_elements() Load: 136/255
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:get_scan_callback() get_scan_callback
src/scan.c:get_scan_done() get_scan_done
src/station.c:station_add_seen_bss() Processing BSS '54:83:3a:07:40:ce' with SSID: bubble, freq: 5500, rank: 10689, strength: -4900
src/station.c:station_add_seen_bss() Added new Network "bubble" security psk
src/station.c:station_add_seen_bss() Processing BSS '72:83:3a:07:40:cb' with SSID: , freq: 5500, rank: 10689, strength: -4900
src/station.c:station_add_seen_bss() BSS has hidden SSID
src/station.c:station_add_seen_bss() Processing BSS '70:50:af:b5:15:85' with SSID: SKY8734E, freq: 5180, rank: 8332, strength: -5800
src/station.c:station_add_seen_bss() Added new Network "SKY8734E" security psk
src/station.c:station_add_seen_bss() Processing BSS '5c:03:39:8b:e0:23' with SSID: VodafoneConnect58472940, freq: 5260, rank: 7109, strength: -5700
src/station.c:station_add_seen_bss() Added new Network "VodafoneConnect58472940" security psk
src/station.c:station_add_seen_bss() Processing BSS '6a:83:3a:07:40:cc' with SSID: erebos, freq: 2437, rank: 4976, strength: -4800
src/station.c:station_add_seen_bss() Added new Network "erebos" security psk
src/station.c:station_add_seen_bss() Processing BSS '54:83:3a:07:40:cd' with SSID: bubble, freq: 2437, rank: 4976, strength: -4800
src/station.c:station_add_seen_bss() Processing BSS '78:65:59:84:95:5a' with SSID: PLUSNET-2JWN, freq: 2412, rank: 4167, strength: -4600
src/station.c:station_add_seen_bss() Added new Network "PLUSNET-2JWN" security psk
src/station.c:station_add_seen_bss() Processing BSS '70:50:af:b5:15:82' with SSID: SKY8734E, freq: 2437, rank: 3935, strength: -4900
src/station.c:station_add_seen_bss() Processing BSS '5c:03:39:8b:e0:21' with SSID: VodafoneConnect58472940, freq: 2472, rank: 3241, strength: -5800
src/station.c:station_add_seen_bss() Processing BSS '9c:31:c3:46:f3:ad' with SSID: SKY1E8VY, freq: 5180, rank: 2937, strength: -7300
src/station.c:station_add_seen_bss() Added new Network "SKY1E8VY" security psk
src/station.c:station_add_seen_bss() Processing BSS '78:65:59:84:95:5b' with SSID: PLUSNET-2JWN, freq: 5180, rank: 2538, strength: -7200
src/station.c:station_add_seen_bss() Processing BSS '9c:31:c3:46:f3:aa' with SSID: SKY1E8VY, freq: 2462, rank: 2495, strength: -6700
src/station.c:station_add_seen_bss() Processing BSS '24:7f:20:54:c2:cd' with SSID: Sagemcom-83K9PH, freq: 2462, rank: 2268, strength: -7000
src/station.c:station_add_seen_bss() Added new Network "Sagemcom-83K9PH" security psk
src/station.c:station_add_seen_bss() Processing BSS 'a0:04:60:3a:81:08' with SSID: SKY8734E_2GEXT, freq: 2437, rank: 2147, strength: -7100
src/station.c:station_add_seen_bss() Added new Network "SKY8734E_2GEXT" security psk
src/station.c:station_add_seen_bss() Processing BSS 'b0:5a:da:f6:7c:ad' with SSID: DIRECT-AC-HP OfficeJet 4650, freq: 2412, rank: 2117, strength: -7100
src/station.c:station_add_seen_bss() Added new Network "DIRECT-AC-HP OfficeJet 4650" security psk
src/station.c:station_add_seen_bss() Processing BSS '08:d5:9d:9f:2f:c4' with SSID: PLUSNET-TCF5, freq: 2437, rank: 2073, strength: -7200
src/station.c:station_add_seen_bss() Added new Network "PLUSNET-TCF5" security psk
src/station.c:station_add_seen_bss() Processing BSS 'd8:0d:17:9a:e0:4e' with SSID: TP-Link_E04E, freq: 2412, rank: 1935, strength: -6800
src/station.c:station_add_seen_bss() Added new Network "TP-Link_E04E" security psk
src/station.c:station_add_seen_bss() Processing BSS 'cc:40:d0:50:e3:15' with SSID: Familyhome_EXT, freq: 2412, rank: 1533, strength: -7900
src/station.c:station_add_seen_bss() Added new Network "Familyhome_EXT" security psk
src/station.c:station_add_seen_bss() Processing BSS '80:72:15:bc:83:f2' with SSID: SKYCE6EM, freq: 2462, rank: 1460, strength: -8000
src/station.c:station_add_seen_bss() Added new Network "SKYCE6EM" security psk
src/station.c:station_add_seen_bss() Processing BSS 'a0:04:60:3a:81:07' with SSID: SKY8734E_5GEXT, freq: 5180, rank: 1387, strength: -8100
src/station.c:station_add_seen_bss() Added new Network "SKY8734E_5GEXT" security psk
src/station.c:station_add_seen_bss() Processing BSS 'cc:32:e5:39:11:fe' with SSID: bubble, freq: 5180, rank: 1080, strength: -8500
src/station.c:station_add_seen_bss() Processing BSS '08:d5:9d:9f:2f:c5' with SSID: PLUSNET-TCF5, freq: 5240, rank: 1008, strength: -8600
src/station.c:station_autoconnect_next() Considering autoconnecting to BSS '54:83:3a:07:40:ce' with SSID: bubble, freq: 5500, rank: 10689, strength: -4900
src/wiphy.c:wiphy_radio_work_insert() Inserting work item 2
src/station.c:__station_connect_network() connecting to BSS 54:83:3a:07:40:ce
src/station.c:station_enter_state() Old State: autoconnect_quick, new state: connecting
src/scan.c:scan_cancel() Trying to cancel scan id 1 for wdev 1
src/wiphy.c:wiphy_radio_work_done() Work item 1 done
src/wiphy.c:wiphy_radio_work_next() Starting work item 2
src/station.c:station_netdev_event() Associating
src/netdev.c:netdev_mlme_notify() MLME notification Connect(46)
src/netdev.c:netdev_connect_event() 
src/netdev.c:netdev_link_notify() event 16 on ifindex 3
src/netdev.c:netdev_link_notify() event 16 on ifindex 3
src/netdev.c:netdev_link_notify() event 16 on ifindex 3
src/wiphy.c:wiphy_reg_notify() Notification of command Reg Change(36)
src/wiphy.c:wiphy_update_reg_domain() New reg domain country code for (global) is DE
src/eapol.c:eapol_handle_ptk_1_of_4() ifindex=3
src/eapol.c:eapol_handle_ptk_3_of_4() ifindex=3
src/netdev.c:netdev_set_gtk() 3
src/station.c:station_handshake_event() Setting keys
src/netdev.c:netdev_set_tk() 3
src/netdev.c:netdev_set_rekey_offload() 3
src/station.c:station_connect_cb() 3, result: 0
src/station.c:station_enter_state() Old State: connecting, new state: connected
src/wiphy.c:wiphy_radio_work_done() Work item 2 done


  reply	other threads:[~2021-04-19 20:41 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-18 17:21 DEL_INTERFACE and CMD_SET_CQM failed; Could not register frame watch type 00d0: -95 Philip Stewart
2021-04-19 16:07 ` James Prestwood
2021-04-19 18:16   ` Philip Stewart
2021-04-19 19:06     ` James Prestwood
2021-04-19 19:58       ` Philip Stewart
2021-04-19 20:10         ` James Prestwood
2021-04-19 20:41           ` Philip Stewart [this message]
2021-04-19 20:55           ` Denis Kenzior
2021-04-19 21:25             ` Philip Stewart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=O4WTRQ.I7V6LWH79YWO2@gmail.com \
    --to=philip.stewart.public@gmail.com \
    --cc=iwd@lists.01.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.