RE: [PATCH] arm64: dts: renesas: r9a07g044: Add Cortex-A55 PMU node

[Biju Das <biju.das.jz@bp.renesas.com>]

Hi Prabhakar,

Thanks for the patch.

> Subject: [PATCH] arm64: dts: renesas: r9a07g044: Add Cortex-A55 PMU node
> 
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> Enable the performance monitor unit for the Cortex-A55 cores on the RZ/G2L
> (r9a07g044) SoC.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
>  arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
> b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
> index 80b2332798d9..ff9bdc03a3ed 100644
> --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
> @@ -161,6 +161,11 @@ opp-50000000 {
>  		};
>  	};
> 
> +	pmu_a55 {
> +		compatible = "arm,cortex-a55-pmu";
> +		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;

Just a question, Is it tested? timer node[1] defines irq type as LOW, here it is high.
Also do we need to define (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW) as it has 2 cores??

[1]
timer {
		compatible = "arm,armv8-timer";
		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
	};

Cheers,
Biju


> +	};
> +
>  	psci {
>  		compatible = "arm,psci-1.0", "arm,psci-0.2";
>  		method = "smc";
> --
> 2.25.1