All of lore.kernel.org
 help / color / mirror / Atom feed
From: Biju Das <biju.das.jz@bp.renesas.com>
To: Biju Das <biju.das.jz@bp.renesas.com>,
	Sergey Shtylyov <s.shtylyov@omp.ru>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>
Cc: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Sergei Shtylyov <sergei.shtylyov@gmail.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Adam Ford <aford173@gmail.com>,
	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
	"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	"linux-renesas-soc@vger.kernel.org" 
	<linux-renesas-soc@vger.kernel.org>,
	Chris Paterson <Chris.Paterson2@renesas.com>,
	Biju Das <biju.das@bp.renesas.com>
Subject: RE: [RFC/PATCH 07/18] ravb: Add magic_pkt to struct ravb_hw_info
Date: Sun, 26 Sep 2021 13:56:59 +0000	[thread overview]
Message-ID: <OS0PR01MB59226404CEE3EE227E2B5AC686A69@OS0PR01MB5922.jpnprd01.prod.outlook.com> (raw)
In-Reply-To: <OS0PR01MB5922800C5282BDB42985A11286A49@OS0PR01MB5922.jpnprd01.prod.outlook.com>

Hi Sergei,

> Subject: RE: [RFC/PATCH 07/18] ravb: Add magic_pkt to struct ravb_hw_info
> 
> Hi Sergei,
> 
> Thanks for the feedback.
> 
> > Subject: Re: [RFC/PATCH 07/18] ravb: Add magic_pkt to struct
> > ravb_hw_info
> >
> > On 9/23/21 5:08 PM, Biju Das wrote:
> >
> > > E-MAC on R-Car supports magic packet detection, whereas RZ/G2L do
> > > not support this feature. Add magic_pkt to struct ravb_hw_info and
> > > enable this feature only for R-Car.
> > >
> > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > [...]
> > > diff --git a/drivers/net/ethernet/renesas/ravb_main.c
> > > b/drivers/net/ethernet/renesas/ravb_main.c
> > > index d37d73f6d984..529364d8f7fb 100644
> > > --- a/drivers/net/ethernet/renesas/ravb_main.c
> > > +++ b/drivers/net/ethernet/renesas/ravb_main.c
> > > @@ -811,12 +811,13 @@ static int ravb_stop_dma(struct net_device
> > > *ndev)  static void ravb_emac_interrupt_unlocked(struct net_device
> > > *ndev)  {
> > >  	struct ravb_private *priv = netdev_priv(ndev);
> > > +	const struct ravb_hw_info *info = priv->info;
> > >  	u32 ecsr, psr;
> > >
> > >  	ecsr = ravb_read(ndev, ECSR);
> > >  	ravb_write(ndev, ecsr, ECSR);	/* clear interrupt */
> > >
> > > -	if (ecsr & ECSR_MPD)
> > > +	if (info->magic_pkt && (ecsr & ECSR_MPD))
> >
> >    I think masking the MPD interrupt would be enough.
> 
> Agreed.
> 
> >
> > >  		pm_wakeup_event(&priv->pdev->dev, 0);
> > >  	if (ecsr & ECSR_ICD)
> > >  		ndev->stats.tx_carrier_errors++;
> > > @@ -1416,8 +1417,9 @@ static void ravb_get_wol(struct net_device
> > > *ndev, struct ethtool_wolinfo *wol)
> >
> >    Didn't you miss ravb_get_wol() -- it needs a change as well...
> 
> I don't think it is required. Framework is taking care of this. Please see
> the output from target.
> 
> root@smarc-rzg2l:~# ethtool -s eth0 wol g netlink error: Operation not
> supported root@smarc-rzg2l:~#
> 
> >
> > >  static int ravb_set_wol(struct net_device *ndev, struct
> > > ethtool_wolinfo *wol)  {
> > >  	struct ravb_private *priv = netdev_priv(ndev);
> > > +	const struct ravb_hw_info *info = priv->info;
> > >
> > > -	if (wol->wolopts & ~WAKE_MAGIC)
> > > +	if (!info->magic_pkt || (wol->wolopts & ~WAKE_MAGIC))
> > >  		return -EOPNOTSUPP;
> > >
> > >  	priv->wol_enabled = !!(wol->wolopts & WAKE_MAGIC);
> > [...]
> >

As discussed, the new patch removes info->magic_pkt from interrupt routine.

Regards,
Biju


  reply	other threads:[~2021-09-26 13:57 UTC|newest]

Thread overview: 79+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-23 14:07 [RFC/PATCH 00/18] Add Gigabit Ethernet driver support Biju Das
2021-09-23 14:07 ` [RFC/PATCH 01/18] ravb: Rename "ravb_set_features_rx_csum" function to "ravb_set_features_rcar" Biju Das
2021-09-27 19:54   ` Sergey Shtylyov
2021-09-23 14:07 ` [RFC/PATCH 02/18] ravb: Rename the variables "no_ptp_cfg_active" and "ptp_cfg_active" Biju Das
2021-09-23 16:07   ` Sergey Shtylyov
2021-09-23 16:35     ` Biju Das
2021-09-23 17:57       ` Sergey Shtylyov
2021-09-23 18:20         ` Biju Das
2021-09-26 13:34           ` Biju Das
2021-09-23 14:07 ` [RFC/PATCH 03/18] ravb: Initialize GbEthernet dmac Biju Das
2021-09-23 17:41   ` Sergey Shtylyov
2021-09-23 18:42     ` Biju Das
2021-09-23 19:07   ` Sergey Shtylyov
2021-09-23 19:22     ` Biju Das
2021-09-23 19:29       ` Biju Das
2021-09-26 13:38         ` Biju Das
2021-09-23 14:07 ` [RFC/PATCH 04/18] ravb: Enable aligned_tx and tx_counters for RZ/G2L Biju Das
2021-09-23 18:05   ` Sergey Shtylyov
2021-09-23 18:10     ` Sergey Shtylyov
2021-09-23 18:13     ` Biju Das
2021-09-26 13:40       ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 05/18] ravb: Exclude gPTP feature support " Biju Das
2021-09-23 19:00   ` Sergey Shtylyov
2021-09-23 19:13     ` Biju Das
2021-09-23 19:41       ` Sergey Shtylyov
2021-09-23 19:45         ` Biju Das
2021-09-26 13:48           ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 06/18] ravb: Add multi_tsrq to struct ravb_hw_info Biju Das
2021-09-23 20:19   ` Sergey Shtylyov
2021-09-24  6:19     ` Biju Das
2021-09-26 13:54       ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 07/18] ravb: Add magic_pkt " Biju Das
2021-09-23 20:42   ` Sergey Shtylyov
2021-09-24  6:24     ` Biju Das
2021-09-26 13:56       ` Biju Das [this message]
2021-09-23 14:08 ` [RFC/PATCH 08/18] ravb: Add mii_rgmii_selection " Biju Das
2021-09-24 19:49   ` Sergey Shtylyov
2021-09-25  6:23     ` Biju Das
2021-09-26 15:49       ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 09/18] ravb: Add half_duplex " Biju Das
2021-09-24 20:07   ` Sergey Shtylyov
2021-09-25  6:37     ` Biju Das
2021-09-26 15:51     ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 10/18] ravb: Initialize GbEthernet E-MAC Biju Das
2021-09-24 20:44   ` Sergey Shtylyov
2021-09-25  6:38     ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 11/18] ravb: Add rx_2k_buffers to struct ravb_hw_info Biju Das
2021-09-24 19:35   ` Sergey Shtylyov
2021-09-26 15:48     ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 12/18] ravb: Add timestamp " Biju Das
2021-09-25 20:52   ` Sergey Shtylyov
2021-09-26  6:34     ` Biju Das
2021-09-26 16:52       ` Biju Das
2021-09-26 20:45       ` Sergey Shtylyov
2021-09-26 20:48         ` Sergei Shtylyov
2021-09-27  6:10           ` Biju Das
2021-09-27  6:04         ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 13/18] ravb: Add rx_ring_free function support for GbEthernet Biju Das
2021-09-27 19:28   ` Sergey Shtylyov
2021-09-28  9:24     ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 14/18] ravb: Add rx_ring_format function " Biju Das
2021-09-27 20:32   ` Sergey Shtylyov
2021-09-29  7:49     ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 15/18] ravb: Add rx_alloc helper " Biju Das
2021-09-23 14:08 ` [RFC/PATCH 16/18] ravb: Add Packet receive function for Gigabit Ethernet Biju Das
2021-10-01 17:27   ` Sergey Shtylyov
2021-10-04 14:56     ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 17/18] ravb: Add carrier_counters to struct ravb_hw_info Biju Das
2021-09-28 20:50   ` Sergey Shtylyov
2021-09-23 14:08 ` [RFC/PATCH 18/18] ravb: Add set_feature support for RZ/G2L Biju Das
2021-09-30 20:39   ` Sergey Shtylyov
2021-10-01  6:53     ` Biju Das
2021-10-01  9:13       ` Sergey Shtylyov
2021-10-01  9:26         ` Biju Das
2021-10-01  8:22     ` Biju Das
2021-09-23 15:11 ` [RFC/PATCH 00/18] Add Gigabit Ethernet driver support Sergey Shtylyov
2021-09-23 15:13   ` Sergey Shtylyov
2021-09-23 15:37   ` Jakub Kicinski
2021-09-23 17:43     ` Sergey Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=OS0PR01MB59226404CEE3EE227E2B5AC686A69@OS0PR01MB5922.jpnprd01.prod.outlook.com \
    --to=biju.das.jz@bp.renesas.com \
    --cc=Chris.Paterson2@renesas.com \
    --cc=aford173@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=biju.das@bp.renesas.com \
    --cc=davem@davemloft.net \
    --cc=geert+renesas@glider.be \
    --cc=kuba@kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=s.shtylyov@omp.ru \
    --cc=sergei.shtylyov@gmail.com \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.