[PATCH v4 01/10] dt-bindings: usb: generic-ohci: Document dr_mode property

[PATCH v4 01/10] dt-bindings: usb: generic-ohci: Document dr_mode property

[Biju Das]

Document the optional property dr_mode present on both RZ/G2 and
R-Car Gen3 SoCs.

It fixes the dtbs_check warning,
'dr_mode' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
---
v3->v4:
  * Added Rob's Acked-by tag.
v2->v3:
  * Dropped RZ/G2L SoC and USBPHY control IP is modelled as reset binding.
v2:
  * New patch
---
 Documentation/devicetree/bindings/usb/generic-ohci.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
index 0f5f6ea702d0..569777a76c90 100644
--- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
@@ -109,6 +109,11 @@ properties:
   iommus:
     maxItems: 1
 
+  dr_mode:
+    enum:
+      - host
+      - otg
+
 required:
   - compatible
   - reg
-- 
2.17.1

[PATCH v4 02/10] dt-bindings: usb: generic-ehci: Document dr_mode property

[Biju Das]

Document the optional property dr_mode present on both RZ/G2 and
R-Car Gen3 SoCs.

It fixes dtbs_check warning,
'dr_mode' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
---
v3->v4:
  * Added Rob's Acked-by tag.
v2->v3:
  * Dropped RZ/G2L SoC and USBPHY control IP is modelled as reset binding.
v2:
  * New patch
---
 Documentation/devicetree/bindings/usb/generic-ehci.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index 8089dc956ba3..f6e5e4abb85b 100644
--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -142,6 +142,11 @@ properties:
   iommus:
     maxItems: 1
 
+  dr_mode:
+    enum:
+      - host
+      - otg
+
 required:
   - compatible
   - reg
-- 
2.17.1

[PATCH v4 03/10] dt-bindings: reset: Document RZ/G2L USBPHY Control bindings

[Biju Das]

Add device tree binding document for RZ/G2L USBPHY Control Device.
It mainly controls reset and power down of the USB/PHY.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
v3->v4:
  * Dropped reset reference.
  * Added Rb-tag from Rob.
 v3:
  * New patch.
  * Modelled USBPHY control from phy bindings to reset bindings, since the
    IP mainly contols the reset of USB PHY.     
---
 .../reset/renesas,rzg2l-usbphy-ctrl.yaml      | 65 +++++++++++++++++++
 1 file changed, 65 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml

diff --git a/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
new file mode 100644
index 000000000000..b13514e6783d
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/renesas,rzg2l-usbphy-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L USBPHY Control
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description:
+  The RZ/G2L USBPHY Control mainly controls reset and power down of the
+  USB/PHY.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-usbphy-ctrl # RZ/G2{L,LC}
+      - const: renesas,rzg2l-usbphy-ctrl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+    description: |
+      The phandle's argument in the reset specifier is the PHY reset associated
+      with the USB port.
+      0 = Port 1 Phy reset
+      1 = Port 2 Phy reset
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - power-domains
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    phyrst: usbphy-ctrl@11c40000 {
+        compatible = "renesas,r9a07g044-usbphy-ctrl",
+                     "renesas,rzg2l-usbphy-ctrl";
+        reg = <0x11c40000 0x10000>;
+        clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>;
+        resets = <&cpg R9A07G044_USB_PRESETN>;
+        power-domains = <&cpg>;
+        #reset-cells = <1>;
+    };
-- 
2.17.1

[PATCH v4 04/10] reset: renesas: Add RZ/G2L usbphy control driver

[Biju Das]

Add support for RZ/G2L USBPHY Control driver. It mainly controls
reset and power down of the USB/PHY.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v3->v4:
 * Incorporated the changes suggested by Philipp
 * removed *dev pointer, replaced the magic number 0xff
 * started using of_reset_simple_xlate
 * Added spinlock for read-modify-writes
 v3:
  * New driver. As per Rob's suggestion, Modelled IP as a reset driver,
    since it mainly controls reset and power down of the PHY.
---
 drivers/reset/Kconfig                   |   7 +
 drivers/reset/Makefile                  |   1 +
 drivers/reset/reset-rzg2l-usbphy-ctrl.c | 175 ++++++++++++++++++++++++
 3 files changed, 183 insertions(+)
 create mode 100644 drivers/reset/reset-rzg2l-usbphy-ctrl.c

diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 328f70f633eb..ed65ea66987b 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -181,6 +181,13 @@ config RESET_RASPBERRYPI
 	  interfacing with RPi4's co-processor and model these firmware
 	  initialization routines as reset lines.
 
+config RESET_RZG2L_USBPHY_CTRL
+	tristate "Renesas RZ/G2L USBPHY control driver"
+	depends on ARCH_R9A07G044 || COMPILE_TEST
+	help
+	  Support for USBPHY Control found on RZ/G2L family. It mainly
+	  controls reset and power down of the USB/PHY.
+
 config RESET_SCMI
 	tristate "Reset driver controlled via ARM SCMI interface"
 	depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index ea8b8d9ca565..21d46d8869ff 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
 obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
 obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o
 obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o
+obj-$(CONFIG_RESET_RZG2L_USBPHY_CTRL) += reset-rzg2l-usbphy-ctrl.o
 obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
 obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
 obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
diff --git a/drivers/reset/reset-rzg2l-usbphy-ctrl.c b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
new file mode 100644
index 000000000000..e0704fd2b533
--- /dev/null
+++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G2L USBPHY control driver
+ *
+ * Copyright (C) 2021 Renesas Electronics Corporation
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/reset-controller.h>
+
+#define RESET			0x000
+
+#define RESET_SEL_PLLRESET	BIT(12)
+#define RESET_PLLRESET		BIT(8)
+
+#define RESET_SEL_P2RESET	BIT(5)
+#define RESET_SEL_P1RESET	BIT(4)
+#define RESET_PHYRST_2		BIT(1)
+#define RESET_PHYRST_1		BIT(0)
+
+#define PHY_RESET_PORT2		(RESET_SEL_P2RESET | RESET_PHYRST_2)
+#define PHY_RESET_PORT1		(RESET_SEL_P1RESET | RESET_PHYRST_1)
+
+#define NUM_PORTS		2
+
+struct rzg2l_usbphy_ctrl_priv {
+	struct reset_controller_dev rcdev;
+	struct reset_control *rstc;
+	void __iomem *base;
+
+	spinlock_t lock;
+};
+
+#define rcdev_to_priv(x)	container_of(x, struct rzg2l_usbphy_ctrl_priv, rcdev)
+
+static int rzg2l_usbphy_ctrl_assert(struct reset_controller_dev *rcdev,
+				    unsigned long id)
+{
+	struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev);
+	u32 port_mask = PHY_RESET_PORT1 | PHY_RESET_PORT2;
+	void __iomem *base = priv->base;
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	val = readl(base + RESET);
+	val |= id ? PHY_RESET_PORT2 : PHY_RESET_PORT1;
+	if (port_mask == (val & port_mask))
+		val |= RESET_PLLRESET;
+	writel(val, base + RESET);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int rzg2l_usbphy_ctrl_deassert(struct reset_controller_dev *rcdev,
+				      unsigned long id)
+{
+	struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev);
+	void __iomem *base = priv->base;
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	val = readl(base + RESET);
+
+	val |= RESET_SEL_PLLRESET;
+	val &= ~(RESET_PLLRESET | (id ? PHY_RESET_PORT2 : PHY_RESET_PORT1));
+	writel(val, base + RESET);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int rzg2l_usbphy_ctrl_status(struct reset_controller_dev *rcdev,
+				    unsigned long id)
+{
+	struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev);
+	u32 port_mask;
+
+	port_mask = id ? PHY_RESET_PORT2 : PHY_RESET_PORT1;
+
+	return !!(readl(priv->base + RESET) & port_mask);
+}
+
+static const struct of_device_id rzg2l_usbphy_ctrl_match_table[] = {
+	{ .compatible = "renesas,rzg2l-usbphy-ctrl" },
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rzg2l_usbphy_ctrl_match_table);
+
+static const struct reset_control_ops rzg2l_usbphy_ctrl_reset_ops = {
+	.assert = rzg2l_usbphy_ctrl_assert,
+	.deassert = rzg2l_usbphy_ctrl_deassert,
+	.status = rzg2l_usbphy_ctrl_status,
+};
+
+static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rzg2l_usbphy_ctrl_priv *priv;
+	unsigned long flags;
+	int error;
+	u32 val;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(priv->rstc))
+		return dev_err_probe(dev, PTR_ERR(priv->rstc),
+				     "failed to get reset\n");
+
+	reset_control_deassert(priv->rstc);
+
+	priv->rcdev.ops = &rzg2l_usbphy_ctrl_reset_ops;
+	priv->rcdev.of_reset_n_cells = 1;
+	priv->rcdev.nr_resets = NUM_PORTS;
+	priv->rcdev.of_node = dev->of_node;
+	priv->rcdev.dev = dev;
+
+	error = devm_reset_controller_register(dev, &priv->rcdev);
+	if (error)
+		return error;
+
+	spin_lock_init(&priv->lock);
+	dev_set_drvdata(dev, priv);
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_resume_and_get(&pdev->dev);
+
+	/* put pll and phy into reset state */
+	spin_lock_irqsave(&priv->lock, flags);
+	val = readl(priv->base + RESET);
+	val |= RESET_SEL_PLLRESET | RESET_PLLRESET | PHY_RESET_PORT2 | PHY_RESET_PORT1;
+	writel(val, priv->base + RESET);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int rzg2l_usbphy_ctrl_remove(struct platform_device *pdev)
+{
+	struct rzg2l_usbphy_ctrl_priv *priv = dev_get_drvdata(&pdev->dev);
+
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	reset_control_assert(priv->rstc);
+
+	return 0;
+}
+
+static struct platform_driver rzg2l_usbphy_ctrl_driver = {
+	.driver = {
+		.name		= "rzg2l_usbphy_ctrl",
+		.of_match_table	= rzg2l_usbphy_ctrl_match_table,
+	},
+	.probe	= rzg2l_usbphy_ctrl_probe,
+	.remove	= rzg2l_usbphy_ctrl_remove,
+};
+module_platform_driver(rzg2l_usbphy_ctrl_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas RZ/G2L USBPHY Control");
+MODULE_AUTHOR("biju.das.jz@bp.renesas.com>");
-- 
2.17.1

[PATCH v4 05/10] arm64: configs: defconfig: Enable RZ/G2L USBPHY control driver

[Biju Das]

RZ/G2L SoC supports USBPHY control,so enable it in ARM64 defconfig.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v3->v4:
 * No Change.
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index e77a2ed23910..cb2a0082b12c 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1100,6 +1100,7 @@ CONFIG_PWM_VISCONTI=m
 CONFIG_SL28CPLD_INTC=y
 CONFIG_QCOM_PDC=y
 CONFIG_RESET_IMX7=y
+CONFIG_RESET_RZG2L_USBPHY_CTRL=y
 CONFIG_RESET_QCOM_AOSS=y
 CONFIG_RESET_QCOM_PDC=m
 CONFIG_RESET_TI_SCI=y
-- 
2.17.1

[PATCH v4 05/10] arm64: configs: defconfig: Enable RZ/G2L USBPHY control driver

[Biju Das]

RZ/G2L SoC supports USBPHY control,so enable it in ARM64 defconfig.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v3->v4:
 * No Change.
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index e77a2ed23910..cb2a0082b12c 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1100,6 +1100,7 @@ CONFIG_PWM_VISCONTI=m
 CONFIG_SL28CPLD_INTC=y
 CONFIG_QCOM_PDC=y
 CONFIG_RESET_IMX7=y
+CONFIG_RESET_RZG2L_USBPHY_CTRL=y
 CONFIG_RESET_QCOM_AOSS=y
 CONFIG_RESET_QCOM_PDC=m
 CONFIG_RESET_TI_SCI=y
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 06/10] dt-bindings: phy: renesas,usb2-phy: Document RZ/G2L phy bindings

[Biju Das]

Document USB phy bindings for RZ/G2L SoC.

RZ/G2L USB2.0 phy uses line ctrl register for OTG_ID pin changes. It uses
a different OTG-BC interrupt bit for device recognition. Apart from this,
the PHY reset is controlled by USBPHY control IP and Document reset is a
required property.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v3->v4:
 * Removed second reset
 * Added family specific compatible string.
v2->v3
 * Created a new compatible for RZ/G2L as per Geert's suggestion.
 * Added resets required properties for RZ/G2L SoC.
---
 .../bindings/phy/renesas,usb2-phy.yaml        | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
index d5dc5a3cdceb..151158d7a224 100644
--- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
@@ -30,6 +30,11 @@ properties:
               - renesas,usb2-phy-r8a77995 # R-Car D3
           - const: renesas,rcar-gen3-usb2-phy
 
+      - items:
+          - enum:
+              - renesas,usb2-phy-r9a07g044 # RZ/G2{L,LC}
+          - const: renesas,rzg2l-usb2-phy  # RZ/G2L family
+
   reg:
     maxItems: 1
 
@@ -91,6 +96,20 @@ required:
   - clocks
   - '#phy-cells'
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rzg2l-usb2-phy
+    then:
+      properties:
+        resets:
+          description: |
+            USB/PHY reset associated with the port.
+      required:
+        - resets
+
 additionalProperties: false
 
 examples:
-- 
2.17.1

[PATCH v4 06/10] dt-bindings: phy: renesas, usb2-phy: Document RZ/G2L phy bindings

[Biju Das]

Document USB phy bindings for RZ/G2L SoC.

RZ/G2L USB2.0 phy uses line ctrl register for OTG_ID pin changes. It uses
a different OTG-BC interrupt bit for device recognition. Apart from this,
the PHY reset is controlled by USBPHY control IP and Document reset is a
required property.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v3->v4:
 * Removed second reset
 * Added family specific compatible string.
v2->v3
 * Created a new compatible for RZ/G2L as per Geert's suggestion.
 * Added resets required properties for RZ/G2L SoC.
---
 .../bindings/phy/renesas,usb2-phy.yaml        | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
index d5dc5a3cdceb..151158d7a224 100644
--- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
@@ -30,6 +30,11 @@ properties:
               - renesas,usb2-phy-r8a77995 # R-Car D3
           - const: renesas,rcar-gen3-usb2-phy
 
+      - items:
+          - enum:
+              - renesas,usb2-phy-r9a07g044 # RZ/G2{L,LC}
+          - const: renesas,rzg2l-usb2-phy  # RZ/G2L family
+
   reg:
     maxItems: 1
 
@@ -91,6 +96,20 @@ required:
   - clocks
   - '#phy-cells'
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rzg2l-usb2-phy
+    then:
+      properties:
+        resets:
+          description: |
+            USB/PHY reset associated with the port.
+      required:
+        - resets
+
 additionalProperties: false
 
 examples:
-- 
2.17.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 07/10] phy: renesas: phy-rcar-gen3-usb2: Add OTG support for RZ/G2L

[Biju Das]

This patch adds OTG support for RZ/G2L SoC.

We need to use a different compatible string due to some differences
with R-Car Gen3 USB2.0 PHY. It uses line ctrl register for OTG_ID
pin changes and different OTG-BC interrupt bit for device recognition.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 v3->v4;
  * using family compatible instead of SoC specific.
 v3:
  * Made seperate compatible for RZ/G2L.
  * Extended rcar_gen3_phy_usb2_match_table[].data to support RZ/G2L.
---
 drivers/phy/renesas/phy-rcar-gen3-usb2.c | 97 ++++++++++++++++++------
 1 file changed, 73 insertions(+), 24 deletions(-)

diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index fbc55232120e..9de617ca9daa 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -64,6 +64,7 @@
 /* VBCTRL */
 #define USB2_VBCTRL_OCCLREN		BIT(16)
 #define USB2_VBCTRL_DRVVBUSSEL		BIT(8)
+#define USB2_VBCTRL_VBOUT		BIT(0)
 
 /* LINECTRL1 */
 #define USB2_LINECTRL1_DPRPD_EN		BIT(19)
@@ -78,6 +79,10 @@
 #define USB2_ADPCTRL_IDPULLUP		BIT(5)	/* 1 = ID sampling is enabled */
 #define USB2_ADPCTRL_DRVVBUS		BIT(4)
 
+/*  RZ/G2L specific */
+#define USB2_OBINT_IDCHG_EN		BIT(0)
+#define USB2_LINECTRL1_USB2_IDMON	BIT(0)
+
 #define NUM_OF_PHYS			4
 enum rcar_gen3_phy_index {
 	PHY_INDEX_BOTH_HC,
@@ -112,9 +117,16 @@ struct rcar_gen3_chan {
 	struct mutex lock;	/* protects rphys[...].powered */
 	enum usb_dr_mode dr_mode;
 	int irq;
+	u32 obint_enable_bits;
 	bool extcon_host;
 	bool is_otg_channel;
 	bool uses_otg_pins;
+	bool soc_no_adp_ctrl;
+};
+
+struct rcar_gen3_phy_drv_data {
+	const struct phy_ops *phy_usb2_ops;
+	bool no_adp_ctrl;
 };
 
 /*
@@ -172,14 +184,22 @@ static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
 static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
 {
 	void __iomem *usb2_base = ch->base;
-	u32 val = readl(usb2_base + USB2_ADPCTRL);
+	u32 vbus_ctrl_reg = USB2_ADPCTRL;
+	u32 vbus_ctrl_val = USB2_ADPCTRL_DRVVBUS;
+	u32 val;
 
 	dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, vbus);
+	if (ch->soc_no_adp_ctrl) {
+		vbus_ctrl_reg = USB2_VBCTRL;
+		vbus_ctrl_val = USB2_VBCTRL_VBOUT;
+	}
+
+	val = readl(usb2_base + vbus_ctrl_reg);
 	if (vbus)
-		val |= USB2_ADPCTRL_DRVVBUS;
+		val |= vbus_ctrl_val;
 	else
-		val &= ~USB2_ADPCTRL_DRVVBUS;
-	writel(val, usb2_base + USB2_ADPCTRL);
+		val &= ~vbus_ctrl_val;
+	writel(val, usb2_base + vbus_ctrl_reg);
 }
 
 static void rcar_gen3_control_otg_irq(struct rcar_gen3_chan *ch, int enable)
@@ -188,9 +208,9 @@ static void rcar_gen3_control_otg_irq(struct rcar_gen3_chan *ch, int enable)
 	u32 val = readl(usb2_base + USB2_OBINTEN);
 
 	if (ch->uses_otg_pins && enable)
-		val |= USB2_OBINT_BITS;
+		val |= ch->obint_enable_bits;
 	else
-		val &= ~USB2_OBINT_BITS;
+		val &= ~ch->obint_enable_bits;
 	writel(val, usb2_base + USB2_OBINTEN);
 }
 
@@ -252,6 +272,9 @@ static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
 	if (!ch->uses_otg_pins)
 		return (ch->dr_mode == USB_DR_MODE_HOST) ? false : true;
 
+	if (ch->soc_no_adp_ctrl)
+		return !!(readl(ch->base + USB2_LINECTRL1) & USB2_LINECTRL1_USB2_IDMON);
+
 	return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
 }
 
@@ -376,16 +399,17 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
 	      USB2_LINECTRL1_DMRPD_EN | USB2_LINECTRL1_DM_RPD;
 	writel(val, usb2_base + USB2_LINECTRL1);
 
-	val = readl(usb2_base + USB2_VBCTRL);
-	val &= ~USB2_VBCTRL_OCCLREN;
-	writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
-	val = readl(usb2_base + USB2_ADPCTRL);
-	writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
-
+	if (!ch->soc_no_adp_ctrl) {
+		val = readl(usb2_base + USB2_VBCTRL);
+		val &= ~USB2_VBCTRL_OCCLREN;
+		writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
+		val = readl(usb2_base + USB2_ADPCTRL);
+		writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
+	}
 	msleep(20);
 
 	writel(0xffffffff, usb2_base + USB2_OBINTSTA);
-	writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
+	writel(ch->obint_enable_bits, usb2_base + USB2_OBINTEN);
 
 	rcar_gen3_device_recognition(ch);
 }
@@ -397,9 +421,9 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
 	u32 status = readl(usb2_base + USB2_OBINTSTA);
 	irqreturn_t ret = IRQ_NONE;
 
-	if (status & USB2_OBINT_BITS) {
+	if (status & ch->obint_enable_bits) {
 		dev_vdbg(ch->dev, "%s: %08x\n", __func__, status);
-		writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
+		writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA);
 		rcar_gen3_device_recognition(ch);
 		ret = IRQ_HANDLED;
 	}
@@ -535,26 +559,45 @@ static const struct phy_ops rz_g1c_phy_usb2_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static const struct rcar_gen3_phy_drv_data rcar_gen3_phy_usb2_data = {
+	.phy_usb2_ops = &rcar_gen3_phy_usb2_ops,
+	.no_adp_ctrl = false,
+};
+
+static const struct rcar_gen3_phy_drv_data rz_g1c_phy_usb2_data = {
+	.phy_usb2_ops = &rz_g1c_phy_usb2_ops,
+	.no_adp_ctrl = false,
+};
+
+static const struct rcar_gen3_phy_drv_data rz_g2l_phy_usb2_data = {
+	.phy_usb2_ops = &rcar_gen3_phy_usb2_ops,
+	.no_adp_ctrl = true,
+};
+
 static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
 	{
 		.compatible = "renesas,usb2-phy-r8a77470",
-		.data = &rz_g1c_phy_usb2_ops,
+		.data = &rz_g1c_phy_usb2_data,
 	},
 	{
 		.compatible = "renesas,usb2-phy-r8a7795",
-		.data = &rcar_gen3_phy_usb2_ops,
+		.data = &rcar_gen3_phy_usb2_data,
 	},
 	{
 		.compatible = "renesas,usb2-phy-r8a7796",
-		.data = &rcar_gen3_phy_usb2_ops,
+		.data = &rcar_gen3_phy_usb2_data,
 	},
 	{
 		.compatible = "renesas,usb2-phy-r8a77965",
-		.data = &rcar_gen3_phy_usb2_ops,
+		.data = &rcar_gen3_phy_usb2_data,
+	},
+	{
+		.compatible = "renesas,rzg2l-usb2-phy",
+		.data = &rz_g2l_phy_usb2_data,
 	},
 	{
 		.compatible = "renesas,rcar-gen3-usb2-phy",
-		.data = &rcar_gen3_phy_usb2_ops,
+		.data = &rcar_gen3_phy_usb2_data,
 	},
 	{ /* sentinel */ },
 };
@@ -608,10 +651,10 @@ static enum usb_dr_mode rcar_gen3_get_dr_mode(struct device_node *np)
 
 static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 {
+	const struct rcar_gen3_phy_drv_data *phy_data;
 	struct device *dev = &pdev->dev;
 	struct rcar_gen3_chan *channel;
 	struct phy_provider *provider;
-	const struct phy_ops *phy_usb2_ops;
 	int ret = 0, i;
 
 	if (!dev->of_node) {
@@ -627,6 +670,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	if (IS_ERR(channel->base))
 		return PTR_ERR(channel->base);
 
+	channel->obint_enable_bits = USB2_OBINT_BITS;
 	/* get irq number here and request_irq for OTG in phy_init */
 	channel->irq = platform_get_irq_optional(pdev, 0);
 	channel->dr_mode = rcar_gen3_get_dr_mode(dev->of_node);
@@ -653,16 +697,21 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	 * And then, phy-core will manage runtime pm for this device.
 	 */
 	pm_runtime_enable(dev);
-	phy_usb2_ops = of_device_get_match_data(dev);
-	if (!phy_usb2_ops) {
+
+	phy_data = of_device_get_match_data(dev);
+	if (!phy_data) {
 		ret = -EINVAL;
 		goto error;
 	}
 
+	channel->soc_no_adp_ctrl = phy_data->no_adp_ctrl;
+	if (phy_data->no_adp_ctrl)
+		channel->obint_enable_bits = USB2_OBINT_IDCHG_EN;
+
 	mutex_init(&channel->lock);
 	for (i = 0; i < NUM_OF_PHYS; i++) {
 		channel->rphys[i].phy = devm_phy_create(dev, NULL,
-							phy_usb2_ops);
+							phy_data->phy_usb2_ops);
 		if (IS_ERR(channel->rphys[i].phy)) {
 			dev_err(dev, "Failed to create USB2 PHY\n");
 			ret = PTR_ERR(channel->rphys[i].phy);
-- 
2.17.1

[PATCH v4 07/10] phy: renesas: phy-rcar-gen3-usb2: Add OTG support for RZ/G2L

[Biju Das]

This patch adds OTG support for RZ/G2L SoC.

We need to use a different compatible string due to some differences
with R-Car Gen3 USB2.0 PHY. It uses line ctrl register for OTG_ID
pin changes and different OTG-BC interrupt bit for device recognition.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 v3->v4;
  * using family compatible instead of SoC specific.
 v3:
  * Made seperate compatible for RZ/G2L.
  * Extended rcar_gen3_phy_usb2_match_table[].data to support RZ/G2L.
---
 drivers/phy/renesas/phy-rcar-gen3-usb2.c | 97 ++++++++++++++++++------
 1 file changed, 73 insertions(+), 24 deletions(-)

diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index fbc55232120e..9de617ca9daa 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -64,6 +64,7 @@
 /* VBCTRL */
 #define USB2_VBCTRL_OCCLREN		BIT(16)
 #define USB2_VBCTRL_DRVVBUSSEL		BIT(8)
+#define USB2_VBCTRL_VBOUT		BIT(0)
 
 /* LINECTRL1 */
 #define USB2_LINECTRL1_DPRPD_EN		BIT(19)
@@ -78,6 +79,10 @@
 #define USB2_ADPCTRL_IDPULLUP		BIT(5)	/* 1 = ID sampling is enabled */
 #define USB2_ADPCTRL_DRVVBUS		BIT(4)
 
+/*  RZ/G2L specific */
+#define USB2_OBINT_IDCHG_EN		BIT(0)
+#define USB2_LINECTRL1_USB2_IDMON	BIT(0)
+
 #define NUM_OF_PHYS			4
 enum rcar_gen3_phy_index {
 	PHY_INDEX_BOTH_HC,
@@ -112,9 +117,16 @@ struct rcar_gen3_chan {
 	struct mutex lock;	/* protects rphys[...].powered */
 	enum usb_dr_mode dr_mode;
 	int irq;
+	u32 obint_enable_bits;
 	bool extcon_host;
 	bool is_otg_channel;
 	bool uses_otg_pins;
+	bool soc_no_adp_ctrl;
+};
+
+struct rcar_gen3_phy_drv_data {
+	const struct phy_ops *phy_usb2_ops;
+	bool no_adp_ctrl;
 };
 
 /*
@@ -172,14 +184,22 @@ static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
 static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
 {
 	void __iomem *usb2_base = ch->base;
-	u32 val = readl(usb2_base + USB2_ADPCTRL);
+	u32 vbus_ctrl_reg = USB2_ADPCTRL;
+	u32 vbus_ctrl_val = USB2_ADPCTRL_DRVVBUS;
+	u32 val;
 
 	dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, vbus);
+	if (ch->soc_no_adp_ctrl) {
+		vbus_ctrl_reg = USB2_VBCTRL;
+		vbus_ctrl_val = USB2_VBCTRL_VBOUT;
+	}
+
+	val = readl(usb2_base + vbus_ctrl_reg);
 	if (vbus)
-		val |= USB2_ADPCTRL_DRVVBUS;
+		val |= vbus_ctrl_val;
 	else
-		val &= ~USB2_ADPCTRL_DRVVBUS;
-	writel(val, usb2_base + USB2_ADPCTRL);
+		val &= ~vbus_ctrl_val;
+	writel(val, usb2_base + vbus_ctrl_reg);
 }
 
 static void rcar_gen3_control_otg_irq(struct rcar_gen3_chan *ch, int enable)
@@ -188,9 +208,9 @@ static void rcar_gen3_control_otg_irq(struct rcar_gen3_chan *ch, int enable)
 	u32 val = readl(usb2_base + USB2_OBINTEN);
 
 	if (ch->uses_otg_pins && enable)
-		val |= USB2_OBINT_BITS;
+		val |= ch->obint_enable_bits;
 	else
-		val &= ~USB2_OBINT_BITS;
+		val &= ~ch->obint_enable_bits;
 	writel(val, usb2_base + USB2_OBINTEN);
 }
 
@@ -252,6 +272,9 @@ static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
 	if (!ch->uses_otg_pins)
 		return (ch->dr_mode == USB_DR_MODE_HOST) ? false : true;
 
+	if (ch->soc_no_adp_ctrl)
+		return !!(readl(ch->base + USB2_LINECTRL1) & USB2_LINECTRL1_USB2_IDMON);
+
 	return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
 }
 
@@ -376,16 +399,17 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
 	      USB2_LINECTRL1_DMRPD_EN | USB2_LINECTRL1_DM_RPD;
 	writel(val, usb2_base + USB2_LINECTRL1);
 
-	val = readl(usb2_base + USB2_VBCTRL);
-	val &= ~USB2_VBCTRL_OCCLREN;
-	writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
-	val = readl(usb2_base + USB2_ADPCTRL);
-	writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
-
+	if (!ch->soc_no_adp_ctrl) {
+		val = readl(usb2_base + USB2_VBCTRL);
+		val &= ~USB2_VBCTRL_OCCLREN;
+		writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
+		val = readl(usb2_base + USB2_ADPCTRL);
+		writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
+	}
 	msleep(20);
 
 	writel(0xffffffff, usb2_base + USB2_OBINTSTA);
-	writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
+	writel(ch->obint_enable_bits, usb2_base + USB2_OBINTEN);
 
 	rcar_gen3_device_recognition(ch);
 }
@@ -397,9 +421,9 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
 	u32 status = readl(usb2_base + USB2_OBINTSTA);
 	irqreturn_t ret = IRQ_NONE;
 
-	if (status & USB2_OBINT_BITS) {
+	if (status & ch->obint_enable_bits) {
 		dev_vdbg(ch->dev, "%s: %08x\n", __func__, status);
-		writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
+		writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA);
 		rcar_gen3_device_recognition(ch);
 		ret = IRQ_HANDLED;
 	}
@@ -535,26 +559,45 @@ static const struct phy_ops rz_g1c_phy_usb2_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static const struct rcar_gen3_phy_drv_data rcar_gen3_phy_usb2_data = {
+	.phy_usb2_ops = &rcar_gen3_phy_usb2_ops,
+	.no_adp_ctrl = false,
+};
+
+static const struct rcar_gen3_phy_drv_data rz_g1c_phy_usb2_data = {
+	.phy_usb2_ops = &rz_g1c_phy_usb2_ops,
+	.no_adp_ctrl = false,
+};
+
+static const struct rcar_gen3_phy_drv_data rz_g2l_phy_usb2_data = {
+	.phy_usb2_ops = &rcar_gen3_phy_usb2_ops,
+	.no_adp_ctrl = true,
+};
+
 static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
 	{
 		.compatible = "renesas,usb2-phy-r8a77470",
-		.data = &rz_g1c_phy_usb2_ops,
+		.data = &rz_g1c_phy_usb2_data,
 	},
 	{
 		.compatible = "renesas,usb2-phy-r8a7795",
-		.data = &rcar_gen3_phy_usb2_ops,
+		.data = &rcar_gen3_phy_usb2_data,
 	},
 	{
 		.compatible = "renesas,usb2-phy-r8a7796",
-		.data = &rcar_gen3_phy_usb2_ops,
+		.data = &rcar_gen3_phy_usb2_data,
 	},
 	{
 		.compatible = "renesas,usb2-phy-r8a77965",
-		.data = &rcar_gen3_phy_usb2_ops,
+		.data = &rcar_gen3_phy_usb2_data,
+	},
+	{
+		.compatible = "renesas,rzg2l-usb2-phy",
+		.data = &rz_g2l_phy_usb2_data,
 	},
 	{
 		.compatible = "renesas,rcar-gen3-usb2-phy",
-		.data = &rcar_gen3_phy_usb2_ops,
+		.data = &rcar_gen3_phy_usb2_data,
 	},
 	{ /* sentinel */ },
 };
@@ -608,10 +651,10 @@ static enum usb_dr_mode rcar_gen3_get_dr_mode(struct device_node *np)
 
 static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 {
+	const struct rcar_gen3_phy_drv_data *phy_data;
 	struct device *dev = &pdev->dev;
 	struct rcar_gen3_chan *channel;
 	struct phy_provider *provider;
-	const struct phy_ops *phy_usb2_ops;
 	int ret = 0, i;
 
 	if (!dev->of_node) {
@@ -627,6 +670,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	if (IS_ERR(channel->base))
 		return PTR_ERR(channel->base);
 
+	channel->obint_enable_bits = USB2_OBINT_BITS;
 	/* get irq number here and request_irq for OTG in phy_init */
 	channel->irq = platform_get_irq_optional(pdev, 0);
 	channel->dr_mode = rcar_gen3_get_dr_mode(dev->of_node);
@@ -653,16 +697,21 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	 * And then, phy-core will manage runtime pm for this device.
 	 */
 	pm_runtime_enable(dev);
-	phy_usb2_ops = of_device_get_match_data(dev);
-	if (!phy_usb2_ops) {
+
+	phy_data = of_device_get_match_data(dev);
+	if (!phy_data) {
 		ret = -EINVAL;
 		goto error;
 	}
 
+	channel->soc_no_adp_ctrl = phy_data->no_adp_ctrl;
+	if (phy_data->no_adp_ctrl)
+		channel->obint_enable_bits = USB2_OBINT_IDCHG_EN;
+
 	mutex_init(&channel->lock);
 	for (i = 0; i < NUM_OF_PHYS; i++) {
 		channel->rphys[i].phy = devm_phy_create(dev, NULL,
-							phy_usb2_ops);
+							phy_data->phy_usb2_ops);
 		if (IS_ERR(channel->rphys[i].phy)) {
 			dev_err(dev, "Failed to create USB2 PHY\n");
 			ret = PTR_ERR(channel->rphys[i].phy);
-- 
2.17.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v4 08/10] arm64: dts: renesas: r9a07g044: Add USB2.0 phy and host support

[Biju Das]

Add USB2.0 phy and host support to SoC DT.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
V3->v4:
 * Removed second reset from phy node.
 V3:
  * Added reset entries
  * Updated compatible, phy and reset entries.
---
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 94 ++++++++++++++++++++++
 1 file changed, 94 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index cdc1da1ede9c..24910ecc683c 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -236,6 +236,100 @@
 			      <0x0 0x11940000 0 0x60000>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
 		};
+
+		phyrst: usbphy-ctrl@11c40000 {
+			compatible = "renesas,r9a07g044-usbphy-ctrl",
+				     "renesas,rzg2l-usbphy-ctrl";
+			reg = <0 0x11c40000 0 0x10000>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>;
+			resets = <&cpg R9A07G044_USB_PRESETN>;
+			power-domains = <&cpg>;
+			#reset-cells = <1>;
+		};
+
+		ohci0: usb@11c50000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11c50000 0 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G044_USB_U2H0_HRESETN>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci1: usb@11c70000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11c70000 0 0x100>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A07G044_USB_U2H1_HRESETN>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci0: usb@11c50100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11c50100 0 0x100>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G044_USB_U2H0_HRESETN>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci1: usb@11c70100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11c70100 0 0x100>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A07G044_USB_U2H1_HRESETN>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@11c50200 {
+			compatible = "renesas,usb2-phy-r9a07g044",
+				     "renesas,rzg2l-usb2-phy";
+			reg = <0 0x11c50200 0 0x700>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@11c70200 {
+			compatible = "renesas,usb2-phy-r9a07g044",
+				     "renesas,rzg2l-usb2-phy";
+			reg = <0 0x11c70200 0 0x700>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
 	};
 
 	timer {
-- 
2.17.1

[PATCH v4 09/10] dt-bindings: usb: renesas,usbhs: Document RZ/G2L bindings

[Biju Das]

Document RZ/G2L (R9A07G044L) SoC bindings.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v3->v4:
 * Added maxitems in interrupt property as per Rob's suggestion.
v3:
 * Updated the bindings as per the USBPHY control IP.
---
 .../bindings/usb/renesas,usbhs.yaml           | 22 +++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
index ad73339ffe1d..a85ad392d443 100644
--- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
+++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
@@ -17,7 +17,9 @@ properties:
           - const: renesas,rza1-usbhs
 
       - items:
-          - const: renesas,usbhs-r7s9210 # RZ/A2
+          - enum:
+              - renesas,usbhs-r7s9210   # RZ/A2
+              - renesas,usbhs-r9a07g044 # RZ/G2{L,LC}
           - const: renesas,rza2-usbhs
 
       - items:
@@ -59,7 +61,8 @@ properties:
       - description: USB 2.0 clock selector
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
 
   renesas,buswait:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -108,6 +111,21 @@ required:
   - clocks
   - interrupts
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,usbhs-r9a07g044
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: U2P_IXL_INT
+            - description: U2P_INT_DMA[0]
+            - description: U2P_INT_DMA[1]
+            - description: U2P_INT_DMAERR
+
 additionalProperties: false
 
 examples:
-- 
2.17.1

[PATCH v4 10/10] arm64: dts: renesas: r9a07g044: Add USB2.0 device support

[Biju Das]

Add USB2.0 device support to RZ/G2L SoC DT.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v3->v4:
 * No change.
 V3:
  * Updated reset entries.
---
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 24910ecc683c..d846469ded7f 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -330,6 +330,25 @@
 			power-domains = <&cpg>;
 			status = "disabled";
 		};
+
+		hsusb: usb@11c60000 {
+			compatible = "renesas,usbhs-r9a07g044",
+				     "renesas,rza2-usbhs";
+			reg = <0 0x11c60000 0 0x10000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2P_EXR_CPUCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G044_USB_U2P_EXL_SYSRST>;
+			renesas,buswait = <7>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
 	};
 
 	timer {
-- 
2.17.1

Re: [PATCH v4 03/10] dt-bindings: reset: Document RZ/G2L USBPHY Control bindings

[Rob Herring]

On Mon, 19 Jul 2021 13:19:31 +0100, Biju Das wrote:
> Add device tree binding document for RZ/G2L USBPHY Control Device.
> It mainly controls reset and power down of the USB/PHY.
> 
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> v3->v4:
>   * Dropped reset reference.
>   * Added Rb-tag from Rob.
>  v3:
>   * New patch.
>   * Modelled USBPHY control from phy bindings to reset bindings, since the
>     IP mainly contols the reset of USB PHY.
> ---
>  .../reset/renesas,rzg2l-usbphy-ctrl.yaml      | 65 +++++++++++++++++++
>  1 file changed, 65 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.example.dts:25.30-31 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:380: Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1418: dt_binding_check] Error 2
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1506961

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

RE: [PATCH v4 03/10] dt-bindings: reset: Document RZ/G2L USBPHY Control bindings

[Biju Das]

Hi Rob,

> Subject: Re: [PATCH v4 03/10] dt-bindings: reset: Document RZ/G2L USBPHY
> Control bindings
> 
> On Mon, 19 Jul 2021 13:19:31 +0100, Biju Das wrote:
> > Add device tree binding document for RZ/G2L USBPHY Control Device.
> > It mainly controls reset and power down of the USB/PHY.
> >
> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > ---
> > v3->v4:
> >   * Dropped reset reference.
> >   * Added Rb-tag from Rob.
> >  v3:
> >   * New patch.
> >   * Modelled USBPHY control from phy bindings to reset bindings, since
> the
> >     IP mainly contols the reset of USB PHY.
> > ---
> >  .../reset/renesas,rzg2l-usbphy-ctrl.yaml      | 65 +++++++++++++++++++
> >  1 file changed, 65 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
> >
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> Error: Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-
> ctrl.example.dts:25.30-31 syntax error FATAL ERROR: Unable to parse input
> tree
> make[1]: *** [scripts/Makefile.lib:380:
> Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-
> ctrl.example.dt.yaml] Error 1
> make[1]: *** Waiting for unfinished jobs....
> make: *** [Makefile:1418: dt_binding_check] Error 2 \ndoc reference errors
> (make refcheckdocs):
> 
> See
> https://jpn01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwor
> k.ozlabs.org%2Fpatch%2F1506961&amp;data=04%7C01%7Cbiju.das.jz%40bp.renesas
> .com%7Cb02057306f9b4db2426008d94ac9ce37%7C53d82571da1947e49cb4625a166a4a2a
> %7C0%7C0%7C637623052878040806%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAi
> LCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=N4%2F9GofL
> NWbtPDddI38ActeGRqtfxdNANC4T241Or1M%3D&amp;reserved=0
> 
> This check can fail if there are any dependencies. The base for a patch
> series is generally the most recent rc1.

The dependency patch for the bot error is present on 5.14-rc2 but not on 5.14-rc1.

Regards,
Biju

> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit.

Re: [PATCH v4 03/10] dt-bindings: reset: Document RZ/G2L USBPHY Control bindings

[Rob Herring]

On Tue, Jul 20, 2021 at 5:26 AM Biju Das <biju.das.jz@bp.renesas.com> wrote:
>
> Hi Rob,
>
> > Subject: Re: [PATCH v4 03/10] dt-bindings: reset: Document RZ/G2L USBPHY
> > Control bindings
> >
> > On Mon, 19 Jul 2021 13:19:31 +0100, Biju Das wrote:
> > > Add device tree binding document for RZ/G2L USBPHY Control Device.
> > > It mainly controls reset and power down of the USB/PHY.
> > >
> > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > Reviewed-by: Rob Herring <robh@kernel.org>
> > > ---
> > > v3->v4:
> > >   * Dropped reset reference.
> > >   * Added Rb-tag from Rob.
> > >  v3:
> > >   * New patch.
> > >   * Modelled USBPHY control from phy bindings to reset bindings, since
> > the
> > >     IP mainly contols the reset of USB PHY.
> > > ---
> > >  .../reset/renesas,rzg2l-usbphy-ctrl.yaml      | 65 +++++++++++++++++++
> > >  1 file changed, 65 insertions(+)
> > >  create mode 100644
> > > Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
> > >
> >
> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> >
> > yamllint warnings/errors:
> >
> > dtschema/dtc warnings/errors:
> > Error: Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-
> > ctrl.example.dts:25.30-31 syntax error FATAL ERROR: Unable to parse input
> > tree
> > make[1]: *** [scripts/Makefile.lib:380:
> > Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-
> > ctrl.example.dt.yaml] Error 1
> > make[1]: *** Waiting for unfinished jobs....
> > make: *** [Makefile:1418: dt_binding_check] Error 2 \ndoc reference errors
> > (make refcheckdocs):
> >
> > See
> > https://jpn01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwor
> > k.ozlabs.org%2Fpatch%2F1506961&amp;data=04%7C01%7Cbiju.das.jz%40bp.renesas
> > .com%7Cb02057306f9b4db2426008d94ac9ce37%7C53d82571da1947e49cb4625a166a4a2a
> > %7C0%7C0%7C637623052878040806%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAi
> > LCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=N4%2F9GofL
> > NWbtPDddI38ActeGRqtfxdNANC4T241Or1M%3D&amp;reserved=0
> >
> > This check can fail if there are any dependencies. The base for a patch
> > series is generally the most recent rc1.
>
> The dependency patch for the bot error is present on 5.14-rc2 but not on 5.14-rc1.

Ok, I've updated the base to rc2. Please note a dependency like that
(anything that's not the last rc1) next time.

Rob

RE: [PATCH v4 03/10] dt-bindings: reset: Document RZ/G2L USBPHY Control bindings

[Biju Das]

Hi Rob,

Thanks for the feedback.

> Subject: Re: [PATCH v4 03/10] dt-bindings: reset: Document RZ/G2L USBPHY
> Control bindings
> 
> On Tue, Jul 20, 2021 at 5:26 AM Biju Das <biju.das.jz@bp.renesas.com>
> wrote:
> >
> > Hi Rob,
> >
> > > Subject: Re: [PATCH v4 03/10] dt-bindings: reset: Document RZ/G2L
> > > USBPHY Control bindings
> > >
> > > On Mon, 19 Jul 2021 13:19:31 +0100, Biju Das wrote:
> > > > Add device tree binding document for RZ/G2L USBPHY Control Device.
> > > > It mainly controls reset and power down of the USB/PHY.
> > > >
> > > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > > > Reviewed-by: Lad Prabhakar
> > > > <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > > Reviewed-by: Rob Herring <robh@kernel.org>
> > > > ---
> > > > v3->v4:
> > > >   * Dropped reset reference.
> > > >   * Added Rb-tag from Rob.
> > > >  v3:
> > > >   * New patch.
> > > >   * Modelled USBPHY control from phy bindings to reset bindings,
> > > > since
> > > the
> > > >     IP mainly contols the reset of USB PHY.
> > > > ---
> > > >  .../reset/renesas,rzg2l-usbphy-ctrl.yaml      | 65
> +++++++++++++++++++
> > > >  1 file changed, 65 insertions(+)
> > > >  create mode 100644
> > > > Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.
> > > > yaml
> > > >
> > >
> > > My bot found errors running 'make DT_CHECKER_FLAGS=-m
> dt_binding_check'
> > > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> > >
> > > yamllint warnings/errors:
> > >
> > > dtschema/dtc warnings/errors:
> > > Error: Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-
> > > ctrl.example.dts:25.30-31 syntax error FATAL ERROR: Unable to parse
> > > input tree
> > > make[1]: *** [scripts/Makefile.lib:380:
> > > Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-
> > > ctrl.example.dt.yaml] Error 1
> > > make[1]: *** Waiting for unfinished jobs....
> > > make: *** [Makefile:1418: dt_binding_check] Error 2 \ndoc reference
> > > errors (make refcheckdocs):
> > >
> > > See
> > > https://jpn01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpa
> > > tchwor
> > > k.ozlabs.org%2Fpatch%2F1506961&amp;data=04%7C01%7Cbiju.das.jz%40bp.r
> > > enesas
> > > .com%7Cb02057306f9b4db2426008d94ac9ce37%7C53d82571da1947e49cb4625a16
> > > 6a4a2a
> > > %7C0%7C0%7C637623052878040806%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLj
> > > AwMDAi
> > > LCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=N4%2
> > > F9GofL
> > > NWbtPDddI38ActeGRqtfxdNANC4T241Or1M%3D&amp;reserved=0
> > >
> > > This check can fail if there are any dependencies. The base for a
> > > patch series is generally the most recent rc1.
> >
> > The dependency patch for the bot error is present on 5.14-rc2 but not on
> 5.14-rc1.
> 
> Ok, I've updated the base to rc2. Please note a dependency like that
> (anything that's not the last rc1) next time.

Agreed. Do I need to resend the current binding patch? Please let me know.

Regards,
Biju

Re: [PATCH v4 03/10] dt-bindings: reset: Document RZ/G2L USBPHY Control bindings

[Rob Herring]

On Mon, Jul 19, 2021 at 01:19:31PM +0100, Biju Das wrote:
> Add device tree binding document for RZ/G2L USBPHY Control Device.
> It mainly controls reset and power down of the USB/PHY.
> 
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> v3->v4:
>   * Dropped reset reference.
>   * Added Rb-tag from Rob.
>  v3:
>   * New patch.
>   * Modelled USBPHY control from phy bindings to reset bindings, since the
>     IP mainly contols the reset of USB PHY.     
> ---
>  .../reset/renesas,rzg2l-usbphy-ctrl.yaml      | 65 +++++++++++++++++++
>  1 file changed, 65 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 06/10] dt-bindings: phy: renesas,usb2-phy: Document RZ/G2L phy bindings

[Rob Herring]

On Mon, Jul 19, 2021 at 01:19:34PM +0100, Biju Das wrote:
> Document USB phy bindings for RZ/G2L SoC.
> 
> RZ/G2L USB2.0 phy uses line ctrl register for OTG_ID pin changes. It uses
> a different OTG-BC interrupt bit for device recognition. Apart from this,
> the PHY reset is controlled by USBPHY control IP and Document reset is a
> required property.
> 
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v3->v4:
>  * Removed second reset
>  * Added family specific compatible string.
> v2->v3
>  * Created a new compatible for RZ/G2L as per Geert's suggestion.
>  * Added resets required properties for RZ/G2L SoC.
> ---
>  .../bindings/phy/renesas,usb2-phy.yaml        | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> index d5dc5a3cdceb..151158d7a224 100644
> --- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> @@ -30,6 +30,11 @@ properties:
>                - renesas,usb2-phy-r8a77995 # R-Car D3
>            - const: renesas,rcar-gen3-usb2-phy
>  
> +      - items:
> +          - enum:
> +              - renesas,usb2-phy-r9a07g044 # RZ/G2{L,LC}
> +          - const: renesas,rzg2l-usb2-phy  # RZ/G2L family
> +
>    reg:
>      maxItems: 1
>  
> @@ -91,6 +96,20 @@ required:
>    - clocks
>    - '#phy-cells'
>  
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: renesas,rzg2l-usb2-phy
> +    then:
> +      properties:
> +        resets:
> +          description: |
> +            USB/PHY reset associated with the port.

You don't need 'properties' part here. Just 'required'.

> +      required:
> +        - resets
> +
>  additionalProperties: false
>  
>  examples:
> -- 
> 2.17.1
> 
> 

Re: [PATCH v4 06/10] dt-bindings: phy: renesas,usb2-phy: Document RZ/G2L phy bindings

[Rob Herring]

On Mon, Jul 19, 2021 at 01:19:34PM +0100, Biju Das wrote:
> Document USB phy bindings for RZ/G2L SoC.
> 
> RZ/G2L USB2.0 phy uses line ctrl register for OTG_ID pin changes. It uses
> a different OTG-BC interrupt bit for device recognition. Apart from this,
> the PHY reset is controlled by USBPHY control IP and Document reset is a
> required property.
> 
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v3->v4:
>  * Removed second reset
>  * Added family specific compatible string.
> v2->v3
>  * Created a new compatible for RZ/G2L as per Geert's suggestion.
>  * Added resets required properties for RZ/G2L SoC.
> ---
>  .../bindings/phy/renesas,usb2-phy.yaml        | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> index d5dc5a3cdceb..151158d7a224 100644
> --- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> @@ -30,6 +30,11 @@ properties:
>                - renesas,usb2-phy-r8a77995 # R-Car D3
>            - const: renesas,rcar-gen3-usb2-phy
>  
> +      - items:
> +          - enum:
> +              - renesas,usb2-phy-r9a07g044 # RZ/G2{L,LC}
> +          - const: renesas,rzg2l-usb2-phy  # RZ/G2L family
> +
>    reg:
>      maxItems: 1
>  
> @@ -91,6 +96,20 @@ required:
>    - clocks
>    - '#phy-cells'
>  
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: renesas,rzg2l-usb2-phy
> +    then:
> +      properties:
> +        resets:
> +          description: |
> +            USB/PHY reset associated with the port.

You don't need 'properties' part here. Just 'required'.

> +      required:
> +        - resets
> +
>  additionalProperties: false
>  
>  examples:
> -- 
> 2.17.1
> 
> 

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v4 09/10] dt-bindings: usb: renesas,usbhs: Document RZ/G2L bindings

[Rob Herring]

On Mon, Jul 19, 2021 at 01:19:37PM +0100, Biju Das wrote:
> Document RZ/G2L (R9A07G044L) SoC bindings.
> 
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v3->v4:
>  * Added maxitems in interrupt property as per Rob's suggestion.
> v3:
>  * Updated the bindings as per the USBPHY control IP.
> ---
>  .../bindings/usb/renesas,usbhs.yaml           | 22 +++++++++++++++++--
>  1 file changed, 20 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
> index ad73339ffe1d..a85ad392d443 100644
> --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
> +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
> @@ -17,7 +17,9 @@ properties:
>            - const: renesas,rza1-usbhs
>  
>        - items:
> -          - const: renesas,usbhs-r7s9210 # RZ/A2
> +          - enum:
> +              - renesas,usbhs-r7s9210   # RZ/A2
> +              - renesas,usbhs-r9a07g044 # RZ/G2{L,LC}
>            - const: renesas,rza2-usbhs
>  
>        - items:
> @@ -59,7 +61,8 @@ properties:
>        - description: USB 2.0 clock selector
>  
>    interrupts:
> -    maxItems: 1
> +    minItems: 1
> +    maxItems: 4
>  
>    renesas,buswait:
>      $ref: /schemas/types.yaml#/definitions/uint32
> @@ -108,6 +111,21 @@ required:
>    - clocks
>    - interrupts
>  
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: renesas,usbhs-r9a07g044
> +    then:
> +      properties:
> +        interrupts:
> +          items:
> +            - description: U2P_IXL_INT
> +            - description: U2P_INT_DMA[0]
> +            - description: U2P_INT_DMA[1]
> +            - description: U2P_INT_DMAERR

else:
  properties:
    interrupts:
      maxItems: 1

> +
>  additionalProperties: false
>  
>  examples:
> -- 
> 2.17.1
> 
> 

RE: [PATCH v4 04/10] reset: renesas: Add RZ/G2L usbphy control driver

[Biju Das]

Hi All,

Gentle ping. Are we happy with this patch? Please let me know.

Regards,
Biju

> Subject: [PATCH v4 04/10] reset: renesas: Add RZ/G2L usbphy control driver
> 
> Add support for RZ/G2L USBPHY Control driver. It mainly controls reset and
> power down of the USB/PHY.
> 
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v3->v4:
>  * Incorporated the changes suggested by Philipp
>  * removed *dev pointer, replaced the magic number 0xff
>  * started using of_reset_simple_xlate
>  * Added spinlock for read-modify-writes
>  v3:
>   * New driver. As per Rob's suggestion, Modelled IP as a reset driver,
>     since it mainly controls reset and power down of the PHY.
> ---
>  drivers/reset/Kconfig                   |   7 +
>  drivers/reset/Makefile                  |   1 +
>  drivers/reset/reset-rzg2l-usbphy-ctrl.c | 175 ++++++++++++++++++++++++
>  3 files changed, 183 insertions(+)
>  create mode 100644 drivers/reset/reset-rzg2l-usbphy-ctrl.c
> 
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index
> 328f70f633eb..ed65ea66987b 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -181,6 +181,13 @@ config RESET_RASPBERRYPI
>  	  interfacing with RPi4's co-processor and model these firmware
>  	  initialization routines as reset lines.
> 
> +config RESET_RZG2L_USBPHY_CTRL
> +	tristate "Renesas RZ/G2L USBPHY control driver"
> +	depends on ARCH_R9A07G044 || COMPILE_TEST
> +	help
> +	  Support for USBPHY Control found on RZ/G2L family. It mainly
> +	  controls reset and power down of the USB/PHY.
> +
>  config RESET_SCMI
>  	tristate "Reset driver controlled via ARM SCMI interface"
>  	depends on ARM_SCMI_PROTOCOL || COMPILE_TEST diff --git
> a/drivers/reset/Makefile b/drivers/reset/Makefile index
> ea8b8d9ca565..21d46d8869ff 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -25,6 +25,7 @@ obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
>  obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
>  obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o
>  obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o
> +obj-$(CONFIG_RESET_RZG2L_USBPHY_CTRL) += reset-rzg2l-usbphy-ctrl.o
>  obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
>  obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
>  obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o diff --git
> a/drivers/reset/reset-rzg2l-usbphy-ctrl.c b/drivers/reset/reset-rzg2l-
> usbphy-ctrl.c
> new file mode 100644
> index 000000000000..e0704fd2b533
> --- /dev/null
> +++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
> @@ -0,0 +1,175 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Renesas RZ/G2L USBPHY control driver
> + *
> + * Copyright (C) 2021 Renesas Electronics Corporation  */
> +
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +#include <linux/reset-controller.h>
> +
> +#define RESET			0x000
> +
> +#define RESET_SEL_PLLRESET	BIT(12)
> +#define RESET_PLLRESET		BIT(8)
> +
> +#define RESET_SEL_P2RESET	BIT(5)
> +#define RESET_SEL_P1RESET	BIT(4)
> +#define RESET_PHYRST_2		BIT(1)
> +#define RESET_PHYRST_1		BIT(0)
> +
> +#define PHY_RESET_PORT2		(RESET_SEL_P2RESET | RESET_PHYRST_2)
> +#define PHY_RESET_PORT1		(RESET_SEL_P1RESET | RESET_PHYRST_1)
> +
> +#define NUM_PORTS		2
> +
> +struct rzg2l_usbphy_ctrl_priv {
> +	struct reset_controller_dev rcdev;
> +	struct reset_control *rstc;
> +	void __iomem *base;
> +
> +	spinlock_t lock;
> +};
> +
> +#define rcdev_to_priv(x)	container_of(x, struct
> rzg2l_usbphy_ctrl_priv, rcdev)
> +
> +static int rzg2l_usbphy_ctrl_assert(struct reset_controller_dev *rcdev,
> +				    unsigned long id)
> +{
> +	struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev);
> +	u32 port_mask = PHY_RESET_PORT1 | PHY_RESET_PORT2;
> +	void __iomem *base = priv->base;
> +	unsigned long flags;
> +	u32 val;
> +
> +	spin_lock_irqsave(&priv->lock, flags);
> +	val = readl(base + RESET);
> +	val |= id ? PHY_RESET_PORT2 : PHY_RESET_PORT1;
> +	if (port_mask == (val & port_mask))
> +		val |= RESET_PLLRESET;
> +	writel(val, base + RESET);
> +	spin_unlock_irqrestore(&priv->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int rzg2l_usbphy_ctrl_deassert(struct reset_controller_dev *rcdev,
> +				      unsigned long id)
> +{
> +	struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev);
> +	void __iomem *base = priv->base;
> +	unsigned long flags;
> +	u32 val;
> +
> +	spin_lock_irqsave(&priv->lock, flags);
> +	val = readl(base + RESET);
> +
> +	val |= RESET_SEL_PLLRESET;
> +	val &= ~(RESET_PLLRESET | (id ? PHY_RESET_PORT2 : PHY_RESET_PORT1));
> +	writel(val, base + RESET);
> +	spin_unlock_irqrestore(&priv->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int rzg2l_usbphy_ctrl_status(struct reset_controller_dev *rcdev,
> +				    unsigned long id)
> +{
> +	struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev);
> +	u32 port_mask;
> +
> +	port_mask = id ? PHY_RESET_PORT2 : PHY_RESET_PORT1;
> +
> +	return !!(readl(priv->base + RESET) & port_mask); }
> +
> +static const struct of_device_id rzg2l_usbphy_ctrl_match_table[] = {
> +	{ .compatible = "renesas,rzg2l-usbphy-ctrl" },
> +	{ /* Sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, rzg2l_usbphy_ctrl_match_table);
> +
> +static const struct reset_control_ops rzg2l_usbphy_ctrl_reset_ops = {
> +	.assert = rzg2l_usbphy_ctrl_assert,
> +	.deassert = rzg2l_usbphy_ctrl_deassert,
> +	.status = rzg2l_usbphy_ctrl_status,
> +};
> +
> +static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev) {
> +	struct device *dev = &pdev->dev;
> +	struct rzg2l_usbphy_ctrl_priv *priv;
> +	unsigned long flags;
> +	int error;
> +	u32 val;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(priv->base))
> +		return PTR_ERR(priv->base);
> +
> +	priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
> +	if (IS_ERR(priv->rstc))
> +		return dev_err_probe(dev, PTR_ERR(priv->rstc),
> +				     "failed to get reset\n");
> +
> +	reset_control_deassert(priv->rstc);
> +
> +	priv->rcdev.ops = &rzg2l_usbphy_ctrl_reset_ops;
> +	priv->rcdev.of_reset_n_cells = 1;
> +	priv->rcdev.nr_resets = NUM_PORTS;
> +	priv->rcdev.of_node = dev->of_node;
> +	priv->rcdev.dev = dev;
> +
> +	error = devm_reset_controller_register(dev, &priv->rcdev);
> +	if (error)
> +		return error;
> +
> +	spin_lock_init(&priv->lock);
> +	dev_set_drvdata(dev, priv);
> +
> +	pm_runtime_enable(&pdev->dev);
> +	pm_runtime_resume_and_get(&pdev->dev);
> +
> +	/* put pll and phy into reset state */
> +	spin_lock_irqsave(&priv->lock, flags);
> +	val = readl(priv->base + RESET);
> +	val |= RESET_SEL_PLLRESET | RESET_PLLRESET | PHY_RESET_PORT2 |
> PHY_RESET_PORT1;
> +	writel(val, priv->base + RESET);
> +	spin_unlock_irqrestore(&priv->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int rzg2l_usbphy_ctrl_remove(struct platform_device *pdev) {
> +	struct rzg2l_usbphy_ctrl_priv *priv = dev_get_drvdata(&pdev->dev);
> +
> +	pm_runtime_put(&pdev->dev);
> +	pm_runtime_disable(&pdev->dev);
> +	reset_control_assert(priv->rstc);
> +
> +	return 0;
> +}
> +
> +static struct platform_driver rzg2l_usbphy_ctrl_driver = {
> +	.driver = {
> +		.name		= "rzg2l_usbphy_ctrl",
> +		.of_match_table	= rzg2l_usbphy_ctrl_match_table,
> +	},
> +	.probe	= rzg2l_usbphy_ctrl_probe,
> +	.remove	= rzg2l_usbphy_ctrl_remove,
> +};
> +module_platform_driver(rzg2l_usbphy_ctrl_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Renesas RZ/G2L USBPHY Control");
> +MODULE_AUTHOR("biju.das.jz@bp.renesas.com>");
> --
> 2.17.1

Re: [PATCH v4 04/10] reset: renesas: Add RZ/G2L usbphy control driver

[Philipp Zabel]

Hi Biju,

On Tue, 2021-07-27 at 07:55 +0000, Biju Das wrote:
> Hi All,
> 
> Gentle ping. Are we happy with this patch? Please let me know.

Do you want me to pick up patches 3 and 4? Are there any dependencies
that I should be aware of?

regards
Philipp

RE: [PATCH v4 04/10] reset: renesas: Add RZ/G2L usbphy control driver

[Biju Das]

Hi Philipp,

Thanks for the feedback

> Subject: Re: [PATCH v4 04/10] reset: renesas: Add RZ/G2L usbphy control
> driver
> 
> Hi Biju,
> 
> On Tue, 2021-07-27 at 07:55 +0000, Biju Das wrote:
> > Hi All,
> >
> > Gentle ping. Are we happy with this patch? Please let me know.
> 
> Do you want me to pick up patches 3 and 4? Are there any dependencies that
> I should be aware of?

Yes please. There is no compile time dependency at all.

But there is a runtime dependency related to clock and the clock patches are queued for v5.15 on renesas-clk
And is present in Linux-next[1] as well.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20210726&id=03fa6e4b2622035389a4beb9699551d63d130493

Regards,
Biju

Re: [PATCH v4 04/10] reset: renesas: Add RZ/G2L usbphy control driver

[Philipp Zabel]

Hi Biju,

On Tue, 2021-07-27 at 13:53 +0000, Biju Das wrote:
> Hi Philipp,
> 
> Thanks for the feedback
> 
> > Subject: Re: [PATCH v4 04/10] reset: renesas: Add RZ/G2L usbphy control
> > driver
> > 
> > Hi Biju,
> > 
> > On Tue, 2021-07-27 at 07:55 +0000, Biju Das wrote:
> > > Hi All,
> > > 
> > > Gentle ping. Are we happy with this patch? Please let me know.
> > 
> > Do you want me to pick up patches 3 and 4? Are there any dependencies that
> > I should be aware of?
> 
> Yes please. There is no compile time dependency at all.

Applied to reset/next, thanks.

regards
Philipp

RE: [PATCH v4 06/10] dt-bindings: phy: renesas,usb2-phy: Document RZ/G2L phy bindings

[Biju Das]

Hi Rob,

Thanks for the feedback.

> Subject: Re: [PATCH v4 06/10] dt-bindings: phy: renesas,usb2-phy: Document
> RZ/G2L phy bindings
> 
> On Mon, Jul 19, 2021 at 01:19:34PM +0100, Biju Das wrote:
> > Document USB phy bindings for RZ/G2L SoC.
> >
> > RZ/G2L USB2.0 phy uses line ctrl register for OTG_ID pin changes. It
> > uses a different OTG-BC interrupt bit for device recognition. Apart
> > from this, the PHY reset is controlled by USBPHY control IP and
> > Document reset is a required property.
> >
> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > v3->v4:
> >  * Removed second reset
> >  * Added family specific compatible string.
> > v2->v3
> >  * Created a new compatible for RZ/G2L as per Geert's suggestion.
> >  * Added resets required properties for RZ/G2L SoC.
> > ---
> >  .../bindings/phy/renesas,usb2-phy.yaml        | 19 +++++++++++++++++++
> >  1 file changed, 19 insertions(+)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> > b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> > index d5dc5a3cdceb..151158d7a224 100644
> > --- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> > @@ -30,6 +30,11 @@ properties:
> >                - renesas,usb2-phy-r8a77995 # R-Car D3
> >            - const: renesas,rcar-gen3-usb2-phy
> >
> > +      - items:
> > +          - enum:
> > +              - renesas,usb2-phy-r9a07g044 # RZ/G2{L,LC}
> > +          - const: renesas,rzg2l-usb2-phy  # RZ/G2L family
> > +
> >    reg:
> >      maxItems: 1
> >
> > @@ -91,6 +96,20 @@ required:
> >    - clocks
> >    - '#phy-cells'
> >
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: renesas,rzg2l-usb2-phy
> > +    then:
> > +      properties:
> > +        resets:
> > +          description: |
> > +            USB/PHY reset associated with the port.
> 
> You don't need 'properties' part here. Just 'required'.

OK. Will fix this in next version.

Regards,
Biju

> 
> > +      required:
> > +        - resets
> > +
> >  additionalProperties: false
> >
> >  examples:
> > --
> > 2.17.1
> >
> >

RE: [PATCH v4 06/10] dt-bindings: phy: renesas,usb2-phy: Document RZ/G2L phy bindings

[Biju Das]

Hi Rob,

Thanks for the feedback.

> Subject: Re: [PATCH v4 06/10] dt-bindings: phy: renesas,usb2-phy: Document
> RZ/G2L phy bindings
> 
> On Mon, Jul 19, 2021 at 01:19:34PM +0100, Biju Das wrote:
> > Document USB phy bindings for RZ/G2L SoC.
> >
> > RZ/G2L USB2.0 phy uses line ctrl register for OTG_ID pin changes. It
> > uses a different OTG-BC interrupt bit for device recognition. Apart
> > from this, the PHY reset is controlled by USBPHY control IP and
> > Document reset is a required property.
> >
> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > v3->v4:
> >  * Removed second reset
> >  * Added family specific compatible string.
> > v2->v3
> >  * Created a new compatible for RZ/G2L as per Geert's suggestion.
> >  * Added resets required properties for RZ/G2L SoC.
> > ---
> >  .../bindings/phy/renesas,usb2-phy.yaml        | 19 +++++++++++++++++++
> >  1 file changed, 19 insertions(+)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> > b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> > index d5dc5a3cdceb..151158d7a224 100644
> > --- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> > @@ -30,6 +30,11 @@ properties:
> >                - renesas,usb2-phy-r8a77995 # R-Car D3
> >            - const: renesas,rcar-gen3-usb2-phy
> >
> > +      - items:
> > +          - enum:
> > +              - renesas,usb2-phy-r9a07g044 # RZ/G2{L,LC}
> > +          - const: renesas,rzg2l-usb2-phy  # RZ/G2L family
> > +
> >    reg:
> >      maxItems: 1
> >
> > @@ -91,6 +96,20 @@ required:
> >    - clocks
> >    - '#phy-cells'
> >
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: renesas,rzg2l-usb2-phy
> > +    then:
> > +      properties:
> > +        resets:
> > +          description: |
> > +            USB/PHY reset associated with the port.
> 
> You don't need 'properties' part here. Just 'required'.

OK. Will fix this in next version.

Regards,
Biju

> 
> > +      required:
> > +        - resets
> > +
> >  additionalProperties: false
> >
> >  examples:
> > --
> > 2.17.1
> >
> >

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

RE: [PATCH v4 09/10] dt-bindings: usb: renesas,usbhs: Document RZ/G2L bindings

[Biju Das]

Hi Rob,

Thanks for the feedback.

> Subject: Re: [PATCH v4 09/10] dt-bindings: usb: renesas,usbhs: Document
> RZ/G2L bindings
> 
> On Mon, Jul 19, 2021 at 01:19:37PM +0100, Biju Das wrote:
> > Document RZ/G2L (R9A07G044L) SoC bindings.
> >
> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > v3->v4:
> >  * Added maxitems in interrupt property as per Rob's suggestion.
> > v3:
> >  * Updated the bindings as per the USBPHY control IP.
> > ---
> >  .../bindings/usb/renesas,usbhs.yaml           | 22 +++++++++++++++++--
> >  1 file changed, 20 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
> b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
> > index ad73339ffe1d..a85ad392d443 100644
> > --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
> > +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
> > @@ -17,7 +17,9 @@ properties:
> >            - const: renesas,rza1-usbhs
> >
> >        - items:
> > -          - const: renesas,usbhs-r7s9210 # RZ/A2
> > +          - enum:
> > +              - renesas,usbhs-r7s9210   # RZ/A2
> > +              - renesas,usbhs-r9a07g044 # RZ/G2{L,LC}
> >            - const: renesas,rza2-usbhs
> >
> >        - items:
> > @@ -59,7 +61,8 @@ properties:
> >        - description: USB 2.0 clock selector
> >
> >    interrupts:
> > -    maxItems: 1
> > +    minItems: 1
> > +    maxItems: 4
> >
> >    renesas,buswait:
> >      $ref: /schemas/types.yaml#/definitions/uint32
> > @@ -108,6 +111,21 @@ required:
> >    - clocks
> >    - interrupts
> >
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: renesas,usbhs-r9a07g044
> > +    then:
> > +      properties:
> > +        interrupts:
> > +          items:
> > +            - description: U2P_IXL_INT
> > +            - description: U2P_INT_DMA[0]
> > +            - description: U2P_INT_DMA[1]
> > +            - description: U2P_INT_DMAERR
> 
> else:
>   properties:
>     interrupts:
>       maxItems: 1

OK. Will fix this in next version.

Cheers,
Biju

> 
> > +
> >  additionalProperties: false
> >
> >  examples:
> > --
> > 2.17.1
> >
> >