All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alan Elder <alan.elder@microsoft.com>
To: Ferruh Yigit <ferruh.yigit@amd.com>,
	Long Li <longli@microsoft.com>,
	Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Cc: "dev@dpdk.org" <dev@dpdk.org>, stephen <stephen@networkplumber.org>
Subject: [PATCH v5] net/netvsc: fix parsing of VLAN metadata
Date: Thu, 15 Feb 2024 18:12:35 +0000	[thread overview]
Message-ID: <PA4PR83MB0526A094C53E5613C0A669A3974D2@PA4PR83MB0526.EURPRD83.prod.outlook.com> (raw)
In-Reply-To: <cd727ea7-6353-4b94-acde-08a93b43f315@amd.com>

The previous code incorrectly parsed the VLAN ID and priority.
If the 16-bits of VLAN ID and priority/CFI on the wire was
0123456789ABCDEF the code parsed it as 456789ABCDEF3012.  There
were macros defined to handle this conversion but they were not
used.

Fixes: 4e9c73e96e83 ("net/netvsc: add Hyper-V network device")
Cc: sthemmin@microsoft.com
Cc: stable@dpdk.org

Signed-off-by: Alan Elder <alan.elder@microsoft.com>
---
v5:
* Move the VLAN parsing macros to rte_ether.h

v4:
* Make consistent with FreeBSD code

---
 .mailmap                     |  1 +
 drivers/net/netvsc/hn_rxtx.c |  8 ++++++--
 lib/net/rte_ether.h          | 16 ++++++++++++++++
 3 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/.mailmap b/.mailmap
index a0756974e2..eca02318d6 100644
--- a/.mailmap
+++ b/.mailmap
@@ -33,6 +33,7 @@ Alain Leon <xerebz@gmail.com>
 Alan Brady <alan.brady@intel.com>
 Alan Carew <alan.carew@intel.com>
 Alan Dewar <alan.dewar@att.com> <adewar@brocade.com>
+Alan Elder <alan.elder@microsoft.com>
 Alan Liu <zaoxingliu@gmail.com>
 Alan Winkowski <walan@marvell.com>
 Alejandro Lucero <alejandro.lucero@netronome.com>
diff --git a/drivers/net/netvsc/hn_rxtx.c b/drivers/net/netvsc/hn_rxtx.c
index e4f5015aa3..9bf1ec5509 100644
--- a/drivers/net/netvsc/hn_rxtx.c
+++ b/drivers/net/netvsc/hn_rxtx.c
@@ -612,7 +612,9 @@ static void hn_rxpkt(struct hn_rx_queue *rxq, struct hn_rx_bufinfo *rxb,
 					   RTE_PTYPE_L4_MASK);
 
 	if (info->vlan_info != HN_NDIS_VLAN_INFO_INVALID) {
-		m->vlan_tci = info->vlan_info;
+		m->vlan_tci = RTE_VLAN_TCI_MAKE(NDIS_VLAN_INFO_ID(info->vlan_info),
+						NDIS_VLAN_INFO_PRI(info->vlan_info),
+						NDIS_VLAN_INFO_CFI(info->vlan_info));
 		m->ol_flags |= RTE_MBUF_F_RX_VLAN_STRIPPED | RTE_MBUF_F_RX_VLAN;
 
 		/* NDIS always strips tag, put it back if necessary */
@@ -1332,7 +1334,9 @@ static void hn_encap(struct rndis_packet_msg *pkt,
 	if (m->ol_flags & RTE_MBUF_F_TX_VLAN) {
 		pi_data = hn_rndis_pktinfo_append(pkt, NDIS_VLAN_INFO_SIZE,
 						  NDIS_PKTINFO_TYPE_VLAN);
-		*pi_data = m->vlan_tci;
+		*pi_data = NDIS_VLAN_INFO_MAKE(RTE_VLAN_TCI_ID(m->vlan_tci),
+					       RTE_VLAN_TCI_PRI(m->vlan_tci),
+					       RTE_VLAN_TCI_DEI(m->vlan_tci));
 	}
 
 	if (m->ol_flags & RTE_MBUF_F_TX_TCP_SEG) {
diff --git a/lib/net/rte_ether.h b/lib/net/rte_ether.h
index ce073ea818..b27f38b3a9 100644
--- a/lib/net/rte_ether.h
+++ b/lib/net/rte_ether.h
@@ -46,6 +46,22 @@ extern "C" {
 
 #define RTE_ETHER_MIN_MTU 68 /**< Minimum MTU for IPv4 packets, see RFC 791. */
 
+/* VLAN header fields */
+#define RTE_VLAN_DEI_SHIFT	12
+#define RTE_VLAN_PRI_SHIFT	13
+#define RTE_VLAN_PRI_MASK	0xe000 /* Priority Code Point */
+#define RTE_VLAN_DEI_MASK	0x1000 /* Drop Eligible Indicator */
+#define RTE_VLAN_ID_MASK	0x0fff /* VLAN Identifier */
+
+#define RTE_VLAN_TCI_ID(vlan_tci)	((vlan_tci) & RTE_VLAN_ID_MASK)
+#define RTE_VLAN_TCI_PRI(vlan_tci)	(((vlan_tci) & RTE_VLAN_PRI_MASK) >>	\
+					 RTE_VLAN_PRI_SHIFT)
+#define RTE_VLAN_TCI_DEI(vlan_tci)	(((vlan_tci) & RTE_VLAN_DEI_MASK) >>	\
+					 RTE_VLAN_DEI_SHIFT)
+#define RTE_VLAN_TCI_MAKE(id, pri, dei)	((id) |					\
+					 ((pri) << RTE_VLAN_PRI_SHIFT) |	\
+					 ((dei) << RTE_VLAN_DEI_SHIFT))
+
 /**
  * Ethernet address:
  * A universally administered address is uniquely assigned to a device by its
-- 
2.25.1


  reply	other threads:[~2024-02-15 18:12 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-08 15:09 [PATCH v3] net/netvsc: fix parsing of VLAN metadata Alan Elder
2024-02-09  1:18 ` Long Li
2024-02-09 15:50   ` [PATCH v4] " Alan Elder
2024-02-14 22:17     ` Long Li
2024-02-15 11:46       ` Ferruh Yigit
2024-02-15 18:12         ` Alan Elder [this message]
2024-02-15 18:25           ` [PATCH v5] " Stephen Hemminger
2024-02-16  9:43           ` [PATCH v6] " Alan Elder
2024-02-16 11:39             ` Ferruh Yigit
2024-02-19  9:31               ` [PATCH v7 0/2] " Alan Elder
2024-02-19  9:31               ` [PATCH v7 1/2] lib/net: " Alan Elder
2024-02-19 11:12                 ` Ferruh Yigit
2024-02-19 11:14                   ` Ferruh Yigit
2024-02-19  9:31               ` [PATCH v7 2/2] net/netvsc: " Alan Elder
2024-02-19 11:12                 ` Ferruh Yigit
2024-02-19  9:34               ` [EXTERNAL] Re: [PATCH v6] " Alan Elder
2024-02-16 11:33           ` [PATCH v5] " Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=PA4PR83MB0526A094C53E5613C0A669A3974D2@PA4PR83MB0526.EURPRD83.prod.outlook.com \
    --to=alan.elder@microsoft.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@amd.com \
    --cc=longli@microsoft.com \
    --cc=stephen@networkplumber.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.