From: "Cardenas Jose Antonio (JCARDENA)" <JoseAntonio.Cardenas@niko.eu>
To: Khem Raj <raj.khem@gmail.com>,
Michael Opdenacker <michael.opdenacker@bootlin.com>
Cc: "yocto@lists.yoctoproject.org" <yocto@lists.yoctoproject.org>
Subject: RE: [yocto] perf compilation fails
Date: Mon, 17 Jan 2022 07:46:30 +0000 [thread overview]
Message-ID: <PR3PR08MB56574E98786D04B046E60B1A8B579@PR3PR08MB5657.eurprd08.prod.outlook.com> (raw)
In-Reply-To: <CAMKF1sp4WgtW16BZ=dYb9xD+yDdoFVAzT6b9ioWDm47Da767vQ@mail.gmail.com>
Yes, that worked! Thank you very much!
-----Mensaje original-----
De: Khem Raj <raj.khem@gmail.com>
Enviado el: viernes, 14 de enero de 2022 20:54
Para: Michael Opdenacker <michael.opdenacker@bootlin.com>
CC: Cardenas Jose Antonio (JCARDENA) <JoseAntonio.Cardenas@niko.eu>; yocto@lists.yoctoproject.org
Asunto: Re: [yocto] perf compilation fails
CAUTION: This email originated from outside the organization. Do not click on links or open attachments unless you recognize the sender and know the content is safe.
take a look at following link, it will help solve this hopefully
https://wiki.gentoo.org/wiki/Project:Toolchain/Binutils_2.34_porting_notes/undefined_reference_to_bfd_get_section_*
On Fri, Jan 14, 2022 at 2:02 AM Michael Opdenacker <michael.opdenacker@bootlin.com> wrote:
>
> Hi Jose Antonio
>
> On 1/13/22 3:29 PM, Cardenas Jose Antonio (JCARDENA) wrote:
> >
> > Hi guys
> >
> >
> >
> > I’m no table to build correctly perf package.
> >
> >
> >
> > It looks like some sources have no been compiled because I’m getting
> > an “undefined reference to” error.
> >
> >
> >
> > This problem has appeared since we have upgraded the version of
> > yocto zeus.
> >
> >
> >
> > I’m getting this error
> >
> >
> >
> > arm-poky-linux-gnueabi-ld
> > --sysroot=/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-
> > gnueabi/perf/1.0-r9/recipe-sysroot
> > -r -o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/perf-in.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-bench.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-annotate.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-config.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-diff.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-evlist.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-ftrace.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-help.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-sched.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-buildid-list.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-buildid-cache.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-kallsyms.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-list.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-record.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-report.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-stat.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-timechart.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-top.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-script.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-kmem.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-lock.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-kvm.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-inject.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-mem.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-data.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-version.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-c2c.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/builtin-probe.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/bench/perf-in.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/tests/perf-in.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/perf.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/util/perf-in.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/arch/perf-in.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/ui/perf-in.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/scripts/perf-in.o
> >
> > arm-poky-linux-gnueabi-gcc -march=armv7-a -mfpu=neon
> > -mfloat-abi=hard -fstack-protector-strong -D_FORTIFY_SOURCE=2
> > -Wformat -Wformat-security -Werror=format-security -Os -pipe -g
> > -feliminate-unused-debug-types
> > -fmacro-prefix-map=/home/bob/develop/yocto/build/tmp/work/emperor-po
> > ky-linux-gnueabi/perf/1.0-r9=/usr/src/debug/perf/1.0-r9
> > -fdebug-prefix-map=/home/bob/develop/yocto/build/tmp/work/emperor-po
> > ky-linux-gnueabi/perf/1.0-r9=/usr/src/debug/perf/1.0-r9
> > -fdebug-prefix-map=/home/bob/develop/yocto/build/tmp/work/emperor-po
> > ky-linux-gnueabi/perf/1.0-r9/recipe-sysroot=
> > -fdebug-prefix-map=/home/bob/develop/yocto/build/tmp/work/emperor-po
> > ky-linux-gnueabi/perf/1.0-r9/recipe-sysroot-native=
> > --sysroot=/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-
> > gnueabi/perf/1.0-r9/recipe-sysroot
> > -ldw -Wbad-function-cast -Wdeclaration-after-statement
> > -Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations
> > -Wmissing-prototypes -Wnested-externs -Wno-system-headers
> > -Wold-style-definition -Wpacked -Wredundant-decls
> > -Wstrict-prototypes -Wswitch-default -Wswitch-enum -Wundef
> > -Wwrite-strings -Wformat
> > -Wstrict-aliasing=3 -Wshadow -DHAVE_PERF_REGS_SUPPORT -O6
> > -fno-omit-frame-pointer -ggdb3 -funwind-tables -Wall -Wextra
> > -std=gnu99 -fstack-protector-all -D_FORTIFY_SOURCE=2
> > -I/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/
> > perf/1.0-r9/perf-1.0/tools/perf/util/include
> > -I/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/
> > perf/1.0-r9/perf-1.0/tools/perf/arch/arm/include
> > -I/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/
> > perf/1.0-r9/perf-1.0/tools/include/uapi
> > -I/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/
> > perf/1.0-r9/perf-1.0/tools/include/
> > -I/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/
> > perf/1.0-r9/perf-1.0/tools/arch/arm/include/uapi
> > -I/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/
> > perf/1.0-r9/perf-1.0/tools/arch/arm/include/
> > -I/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/
> > perf/1.0-r9/perf-1.0/tools/arch/arm/
> > -I/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/
> > perf/1.0-r9/perf-1.0//util
> > -I/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/
> > perf/1.0-r9/perf-1.0/
> > -I/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/
> > perf/1.0-r9/perf-1.0/tools/perf/util
> > -I/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/
> > perf/1.0-r9/perf-1.0/tools/perf
> > -I/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/
> > perf/1.0-r9/perf-1.0/tools/lib/ -D_LARGEFILE64_SOURCE
> > -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
> > -DHAVE_SYNC_COMPARE_AND_SWAP_SUPPORT
> > -DHAVE_PTHREAD_ATTR_SETAFFINITY_NP -DHAVE_PTHREAD_BARRIER
> > -DHAVE_EVENTFD -DHAVE_GET_CURRENT_DIR_NAME -DHAVE_GETTID
> > -DHAVE_DWARF_GETLOCATIONS_SUPPORT -DHAVE_GLIBC_SUPPORT
> > -DHAVE_AIO_SUPPORT -DHAVE_SCHED_GETCPU_SUPPORT -DHAVE_SETNS_SUPPORT
> > -DHAVE_LIBELF_SUPPORT -DHAVE_LIBELF_MMAP_SUPPORT
> > -DHAVE_ELF_GETPHDRNUM_SUPPORT -DHAVE_GELF_GETNOTE_SUPPORT
> > -DHAVE_ELF_GETSHDRSTRNDX_SUPPORT -DHAVE_LIBBPF_SUPPORT
> > -DHAVE_JITDUMP -DHAVE_DWARF_UNWIND_SUPPORT -DHAVE_LIBUNWIND_SUPPORT
> > -I/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/
> > perf/1.0-r9/recipe-sysroot/usr/include
> > -DHAVE_LIBCRYPTO_SUPPORT -DHAVE_SLANG_SUPPORT -DNO_LIBPERL
> > -DHAVE_TIMERFD_SUPPORT -DNO_LIBPYTHON -DHAVE_CPLUS_DEMANGLE_SUPPORT
> > -DHAVE_LIBBFD_SUPPORT -DHAVE_ZLIB_SUPPORT -DHAVE_LZMA_SUPPORT
> > -DHAVE_BACKTRACE_SUPPORT -DDISASM_FOUR_ARGS_SIGNATURE
> > -DHAVE_AUXTRACE_SUPPORT
> > -I/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/
> > perf/1.0-r9/perf-1.0/ -ldl -lutil -Wl,-z,noexecstack -lunwind
> > -lunwind-arm
> > -L/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/
> > perf/1.0-r9/recipe-sysroot/usr/lib
> > -Xlinker
> > --dynamic-list=/home/bob/develop/yocto/build/tmp/work/emperor-poky-l
> > inux-gnueabi/perf/1.0-r9/perf-1.0/libtraceevent-dynamic-list
> > \
> >
> >
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/perf-in.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/pmu-events/pmu-events-in.o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/libperf-in.o
> > -Wl,--whole-archive
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/libapi.a
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/libtraceevent.a
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/libsubcmd.a
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/libbpf.a -Wl,--no-whole-archive -Wl,--start-group
> > -lpthread -lrt -lm -ldl -lelf -lunwind -lunwind-arm -lcrypto -lslang
> > -lbfd -lopcodes -liberty -lz -llzma -Wl,--end-group -o
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/perf
> >
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/perf/1.0-r9/recipe-sysroot-native/usr/bin/arm-poky-linux-gnueabi/../../libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/9.3.0/ld:
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/perf/1.0-r9/perf-1.0/perf-in.o:
> > in function `find_address_in_section':
> >
> > /usr/src/debug/perf/1.0-r9/perf-1.0/tools/perf/util/srcline.c:200:
> > undefined reference to `bfd_get_section_flags'
> >
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/perf/1.0-r9/recipe-sysroot-native/usr/bin/arm-poky-linux-gnueabi/../../libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/9.3.0/ld:
> > /usr/src/debug/perf/1.0-r9/perf-1.0/tools/perf/util/srcline.c:204:
> > undefined reference to `bfd_get_section_vma'
> >
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/perf/1.0-r9/recipe-sysroot-native/usr/bin/arm-poky-linux-gnueabi/../../libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/9.3.0/ld:
> > /usr/src/debug/perf/1.0-r9/perf-1.0/tools/perf/util/srcline.c:205:
> > undefined reference to `bfd_get_section_size'
> >
> > collect2: error: ld returned 1 exit status
> >
> > make[2]: *** [Makefile.perf:608:
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/perf-1.0/perf]
> > Error 1
> >
> > make[1]: *** [Makefile.perf:219: sub-make] Error 2
> >
> > make: *** [Makefile:70: all] Error 2
> >
> > make: Leaving directory
> > '/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/perf/1.0-r9/perf-1.0/tools/perf'
> >
> > ERROR: oe_runmake failed
> >
> > WARNING:
> > /home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/pe
> > rf/1.0-r9/temp/run.do_compile.146045:1
> > exit 1 from 'exit 1'
> >
> > ERROR: Execution of
> > '/home/bob/develop/yocto/build/tmp/work/emperor-poky-linux-gnueabi/perf/1.0-r9/temp/run.do_compile.146045'
> > failed with exit code 1
> >
>
> Weird, this doesn't happen building core-image-minimal *for x86_64* on
> the latest Poky, with gcc 11.2.
> This may not help much, but at least you could compare.
> Cheers
> Michael.
>
> --
> Michael Opdenacker, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
>
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> You automatically follow any topics you start or reply to.
> View/Reply Online (#55874):
> https://lists.yoctoproject.org/g/yocto/message/55874
> Mute This Topic: https://lists.yoctoproject.org/mt/88397478/1997914
> Group Owner: yocto+owner@lists.yoctoproject.org
> Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub
> [raj.khem@gmail.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>
prev parent reply other threads:[~2022-01-17 7:46 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-13 14:29 perf compilation fails Cardenas Jose Antonio (JCARDENA)
[not found] ` <6f90a2ff-5fd5-6460-6bfa-9072b2dcb294@bootlin.com>
2022-01-14 19:54 ` [yocto] " Khem Raj
2022-01-17 7:46 ` Cardenas Jose Antonio (JCARDENA) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=PR3PR08MB56574E98786D04B046E60B1A8B579@PR3PR08MB5657.eurprd08.prod.outlook.com \
--to=joseantonio.cardenas@niko.eu \
--cc=michael.opdenacker@bootlin.com \
--cc=raj.khem@gmail.com \
--cc=yocto@lists.yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.