diff for duplicates of <Pine.LNX.4.44L0.1710271550360.1355-100000@iolanthe.rowland.org>
diff --git a/a/1.txt b/N1/1.txt
index ba0a324..18d77a6 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -2,7 +2,7 @@ On Fri, 27 Oct 2017, Martin Blumenstingl wrote:
> Hi Rob,
>
-> On Fri, Oct 27, 2017 at 5:29 AM, Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
+> On Fri, Oct 27, 2017 at 5:29 AM, Rob Herring <robh@kernel.org> wrote:
> > On Mon, Oct 23, 2017 at 11:57:18PM +0200, Martin Blumenstingl wrote:
> >> This extends the existing example from the USB xHCI binding
> >> documentation so it includes the roothub and an actual device.
@@ -13,7 +13,7 @@ On Fri, 27 Oct 2017, Martin Blumenstingl wrote:
> >> other devices on the bus below the roothub allows us to keep the
> >> properties, for example the PHYs, separated).
> >>
-> >> Signed-off-by: Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
+> >> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> >> ---
> >> Documentation/devicetree/bindings/usb/usb-xhci.txt | 23 ++++++++++++++++++++++
> >> 1 file changed, 23 insertions(+)
@@ -31,13 +31,13 @@ On Fri, 27 Oct 2017, Martin Blumenstingl wrote:
> >> + #size-cells = <0>;
> >> +
> >> + /* see usb-roothub.txt */
-> >> + roothub@0 {
+> >> + roothub at 0 {
> >> + compatible = "usb1d6b,3", "usb1d6b,2";
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + reg = <0>;
> >> +
-> >> + port@1 {
+> >> + port at 1 {
> >> + reg = <1>;
> >> + phys = <&usb2_phy1>, <&usb3_phy1>;
> >> + phy-names = "usb2-phy", "usb3-phy";
@@ -45,7 +45,7 @@ On Fri, 27 Oct 2017, Martin Blumenstingl wrote:
> >> + };
> >> +
> >> + /* see usb-device.txt */
-> >> + hub: genesys@1 {
+> >> + hub: genesys at 1 {
> >
> > What do the 0 and 1 addresses correspond to?
> 0 is the address of the root-hub, 1 is the first device on the root-hub
@@ -65,25 +65,25 @@ On Fri, 27 Oct 2017, Martin Blumenstingl wrote:
> D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
> P: Vendor=1d6b ProdID=0003 Rev= 3.14
> -> (USB3 root-hub from a dwc3 controller) in the device-tree example
-> this belongs to &usb/roothub@0
+> this belongs to &usb/roothub at 0
>
> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
> D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=1d6b ProdID=0002 Rev= 3.14
> -> (USB2 root-hub from a dwc3 controller) in the device-tree example
-> this also belongs to &usb/roothub@0
+> this also belongs to &usb/roothub at 0
>
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
> D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=1a40 ProdID=0801 Rev= 1.00
> -> (USB2 hub soldered to the board, connected to root-hub port 1) in
-> the device-tree example this belongs to &usb/genesys@1
+> the device-tree example this belongs to &usb/genesys at 1
>
> T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=090c ProdID=1000 Rev= 7.22
> -> USB thumb drive connected to the USB hub, not listed in the
-> device-tree example but it would be listed below &usb/genesys@1
+> device-tree example but it would be listed below &usb/genesys at 1
Two things to be aware of:
@@ -95,9 +95,4 @@ Two things to be aware of:
2. Port numbers are meaningless for root hubs, because root hubs
by definition are not connected to any upstream USB ports.
-Alan Stern
-
---
-To unsubscribe from this list: send the line "unsubscribe linux-usb" in
-the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
-More majordomo info at http://vger.kernel.org/majordomo-info.html
\ No newline at end of file
+Alan Stern
\ No newline at end of file
diff --git a/a/content_digest b/N1/content_digest
index c578cb4..f23d34d 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -2,31 +2,16 @@
"ref\0CAFBinCALbByzAiAqTOzGj6XHASGwWX34xg7GKf=Fa6_eiCEnkA\@mail.gmail.com\0"
]
[
- "ref\0CAFBinCALbByzAiAqTOzGj6XHASGwWX34xg7GKf=Fa6_eiCEnkA-JsoAwUIsXosN+BqQ9rBEUg\@public.gmane.org\0"
+ "From\0stern\@rowland.harvard.edu (Alan Stern)\0"
]
[
- "From\0Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz\@public.gmane.org>\0"
-]
-[
- "Subject\0Re: [PATCH v7 usb-next 4/4] dt-bindings: usb: xhci: include the roothub and a device in the example\0"
+ "Subject\0[PATCH v7 usb-next 4/4] dt-bindings: usb: xhci: include the roothub and a device in the example\0"
]
[
"Date\0Fri, 27 Oct 2017 15:55:13 -0400 (EDT)\0"
]
[
- "To\0Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg\@public.gmane.org>\0"
-]
-[
- "Cc\0Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A\@public.gmane.org>",
- " linux-usb-u79uwXL29TY76Z2rM5mHXA\@public.gmane.org",
- " gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r\@public.gmane.org",
- " felipe.balbi-VuQAYsv1563Yd54FQh9/CA\@public.gmane.org",
- " mathias.nyman-ral2JQCrhuEAvxtiuMwx3w\@public.gmane.org",
- " devicetree-u79uwXL29TY76Z2rM5mHXA\@public.gmane.org",
- " arnd-r2nGTMty4D4\@public.gmane.org",
- " mark.rutland-5wv7dgnIgG8\@public.gmane.org",
- " linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r\@public.gmane.org",
- " chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w\@public.gmane.org\0"
+ "To\0linus-amlogic\@lists.infradead.org\0"
]
[
"\0000:1\0"
@@ -39,7 +24,7 @@
"\n",
"> Hi Rob,\n",
"> \n",
- "> On Fri, Oct 27, 2017 at 5:29 AM, Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A\@public.gmane.org> wrote:\n",
+ "> On Fri, Oct 27, 2017 at 5:29 AM, Rob Herring <robh\@kernel.org> wrote:\n",
"> > On Mon, Oct 23, 2017 at 11:57:18PM +0200, Martin Blumenstingl wrote:\n",
"> >> This extends the existing example from the USB xHCI binding\n",
"> >> documentation so it includes the roothub and an actual device.\n",
@@ -50,7 +35,7 @@
"> >> other devices on the bus below the roothub allows us to keep the\n",
"> >> properties, for example the PHYs, separated).\n",
"> >>\n",
- "> >> Signed-off-by: Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg\@public.gmane.org>\n",
+ "> >> Signed-off-by: Martin Blumenstingl <martin.blumenstingl\@googlemail.com>\n",
"> >> ---\n",
"> >> Documentation/devicetree/bindings/usb/usb-xhci.txt | 23 ++++++++++++++++++++++\n",
"> >> 1 file changed, 23 insertions(+)\n",
@@ -68,13 +53,13 @@
"> >> + #size-cells = <0>;\n",
"> >> +\n",
"> >> + /* see usb-roothub.txt */\n",
- "> >> + roothub\@0 {\n",
+ "> >> + roothub at 0 {\n",
"> >> + compatible = \"usb1d6b,3\", \"usb1d6b,2\";\n",
"> >> + #address-cells = <1>;\n",
"> >> + #size-cells = <0>;\n",
"> >> + reg = <0>;\n",
"> >> +\n",
- "> >> + port\@1 {\n",
+ "> >> + port at 1 {\n",
"> >> + reg = <1>;\n",
"> >> + phys = <&usb2_phy1>, <&usb3_phy1>;\n",
"> >> + phy-names = \"usb2-phy\", \"usb3-phy\";\n",
@@ -82,7 +67,7 @@
"> >> + };\n",
"> >> +\n",
"> >> + /* see usb-device.txt */\n",
- "> >> + hub: genesys\@1 {\n",
+ "> >> + hub: genesys at 1 {\n",
"> >\n",
"> > What do the 0 and 1 addresses correspond to?\n",
"> 0 is the address of the root-hub, 1 is the first device on the root-hub\n",
@@ -102,25 +87,25 @@
"> D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1\n",
"> P: Vendor=1d6b ProdID=0003 Rev= 3.14\n",
"> -> (USB3 root-hub from a dwc3 controller) in the device-tree example\n",
- "> this belongs to &usb/roothub\@0\n",
+ "> this belongs to &usb/roothub at 0\n",
"> \n",
"> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2\n",
"> D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1\n",
"> P: Vendor=1d6b ProdID=0002 Rev= 3.14\n",
"> -> (USB2 root-hub from a dwc3 controller) in the device-tree example\n",
- "> this also belongs to &usb/roothub\@0\n",
+ "> this also belongs to &usb/roothub at 0\n",
"> \n",
"> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4\n",
"> D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1\n",
"> P: Vendor=1a40 ProdID=0801 Rev= 1.00\n",
"> -> (USB2 hub soldered to the board, connected to root-hub port 1) in\n",
- "> the device-tree example this belongs to &usb/genesys\@1\n",
+ "> the device-tree example this belongs to &usb/genesys at 1\n",
"> \n",
"> T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0\n",
"> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1\n",
"> P: Vendor=090c ProdID=1000 Rev= 7.22\n",
"> -> USB thumb drive connected to the USB hub, not listed in the\n",
- "> device-tree example but it would be listed below &usb/genesys\@1\n",
+ "> device-tree example but it would be listed below &usb/genesys at 1\n",
"\n",
"Two things to be aware of:\n",
"\n",
@@ -132,12 +117,7 @@
" 2.\tPort numbers are meaningless for root hubs, because root hubs\n",
"\tby definition are not connected to any upstream USB ports.\n",
"\n",
- "Alan Stern\n",
- "\n",
- "--\n",
- "To unsubscribe from this list: send the line \"unsubscribe linux-usb\" in\n",
- "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA\@public.gmane.org\n",
- "More majordomo info at http://vger.kernel.org/majordomo-info.html"
+ "Alan Stern"
]
-ec8c3d02715c7bdd39981c4af68a7059b0166777dd8c03b528734cac5b69f69b
+77574299769f4565aea51dceffafcb4f4c001c449052ed4e707dbafaf8f78377
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.