Hi All,

Thanks for the feedback.

> Subject: RE: [PATCH 4.4.y-cip 0/9] Add LCD Panel support for RZ/G1E board
>
> Hi all,
>
> > -----Original Message-----
> > From: Pavel Machek [mailto:pavel@denx.de]
> > Sent: Wednesday, July 29, 2020 5:40 AM
> > To: Biju Das <biju.das.jz@bp.renesas.com>
> > Cc: cip-dev@lists.cip-project.org; iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ
> ◯ＡＣＴ)
> > <nobuhiro1.iwamatsu@toshiba.co.jp>; Chris Paterson
> > <chris.paterson2@renesas.com>; Prabhakar Mahadev Lad
> > <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > Subject: Re: [PATCH 4.4.y-cip 0/9] Add LCD Panel support for RZ/G1E
> > board
> >
> > Hi!
> >
> > > Add LCD Panel support for iWave RZ/G1E board based on r8a7745 SoC.
> > >
> > > Backporting the panel patch as it is, requires drm bridge Api
> > > changes, which is not present at 4.4 kernel. So used the 4.4 rm
> > > framework to attach the simple panel driver with rgb connector
> > > driver. The rgb connector is based on the workdone for the lvds
> > > connector. The display panel binding patch is backported to 4.4
> > > kernel,since the mainline uses yaml file and it conflict with corresponding
> .txt in 4.4 kernel.
> > >
> > > Other patches in this series are cherry picked from mainline.
> >
> > I don't see anything wrong with this, so I'll test/apply it if noone objects.
> >
>
> I didn't see any isseue this patche series.
> The CI test is fine, so I commit.
>
> > I guess we could like patches for cip-kernel-config repository to
> > actually enable this in our testing...
>
> +1.

Sure I will send a new merge request for cip-kernel-config.

Cheers,
Biju


Renesas Electronics Europe GmbH, Geschaeftsfuehrer/President: Carsten Jauch, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany, Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647