[PATCH v3] crypto: caam: Drop leading zero from input buffer

[PATCH v3] crypto: caam: Drop leading zero from input buffer

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam@nxp.com>

imx6ul and imx7 report the following error:

caam_jr 2142000.jr1: 40000789: DECO: desc idx 7:
Protocol Size Error - A protocol has seen an error in size. When
running RSA, pdb size N < (size of F) when no formatting is used; or
pdb size N < (F + 11) when formatting is used.

------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at crypto/asymmetric_keys/public_key.c:148
public_key_verify_signature+0x27c/0x2b0

This error happens because the signature contains 257 bytes, including
a leading zero as the first element.

Fix the problem by stripping off the leading zero from input data
before feeding it to the CAAM accelerator.

Fixes: 8c419778ab57e497b5 ("crypto: caam - add support for RSA algorithm")
Cc: <stable@vger.kernel.org>
Reported-by: Martin Townsend <mtownsend1973@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
Changes since v2:
- Check if the lenght is zero after calling caam_rsa_drop_leading_zeros()

 drivers/crypto/caam/caampkc.c | 45 +++++++++++++++++++++++++++++++++++--------
 1 file changed, 37 insertions(+), 8 deletions(-)

diff --git a/drivers/crypto/caam/caampkc.c b/drivers/crypto/caam/caampkc.c
index 7a897209..47467ff 100644
--- a/drivers/crypto/caam/caampkc.c
+++ b/drivers/crypto/caam/caampkc.c
@@ -166,6 +166,14 @@ static void rsa_priv_f3_done(struct device *dev, u32 *desc, u32 err,
 	akcipher_request_complete(req, err);
 }
 
+static void caam_rsa_drop_leading_zeros(const u8 **ptr, size_t *nbytes)
+{
+	while (!**ptr && *nbytes) {
+		(*ptr)++;
+		(*nbytes)--;
+	}
+}
+
 static struct rsa_edesc *rsa_edesc_alloc(struct akcipher_request *req,
 					 size_t desclen)
 {
@@ -178,7 +186,36 @@ static struct rsa_edesc *rsa_edesc_alloc(struct akcipher_request *req,
 	int sgc;
 	int sec4_sg_index, sec4_sg_len = 0, sec4_sg_bytes;
 	int src_nents, dst_nents;
+	const u8 *temp;
+	void *buffer;
+	size_t len;
+
+	buffer = kzalloc(req->src_len, GFP_ATOMIC);
+	if (!buffer)
+		return ERR_PTR(-ENOMEM);
+
+	sg_copy_to_buffer(req->src, sg_nents(req->src),
+			  buffer, req->src_len);
+	temp = (u8 *)buffer;
+	len = req->src_len;
 
+	/*
+	 * Check if the buffer contains leading zeros and if
+	 * it does, drop the leading zeros
+	 */
+	if (temp[0] == 0) {
+		caam_rsa_drop_leading_zeros(&temp, &len);
+		if (!len) {
+			kfree(buffer);
+			return ERR_PTR(-ENOMEM);
+		}
+
+		req->src_len = len;
+		sg_copy_from_buffer(req->src, sg_nents(req->src),
+				    (void *)temp, req->src_len);
+	}
+
+	kfree(buffer);
 	src_nents = sg_nents_for_len(req->src, req->src_len);
 	dst_nents = sg_nents_for_len(req->dst, req->dst_len);
 
@@ -683,14 +720,6 @@ static void caam_rsa_free_key(struct caam_rsa_key *key)
 	memset(key, 0, sizeof(*key));
 }
 
-static void caam_rsa_drop_leading_zeros(const u8 **ptr, size_t *nbytes)
-{
-	while (!**ptr && *nbytes) {
-		(*ptr)++;
-		(*nbytes)--;
-	}
-}
-
 /**
  * caam_read_rsa_crt - Used for reading dP, dQ, qInv CRT members.
  * dP, dQ and qInv could decode to less than corresponding p, q length, as the
-- 
2.7.4

Re: [PATCH v3] crypto: caam: Drop leading zero from input buffer

[Martin Townsend]

On Sun, Apr 15, 2018 at 3:12 PM, Fabio Estevam <festevam@gmail.com> wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
>
> imx6ul and imx7 report the following error:
>
> caam_jr 2142000.jr1: 40000789: DECO: desc idx 7:
> Protocol Size Error - A protocol has seen an error in size. When
> running RSA, pdb size N < (size of F) when no formatting is used; or
> pdb size N < (F + 11) when formatting is used.
>
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 1 at crypto/asymmetric_keys/public_key.c:148
> public_key_verify_signature+0x27c/0x2b0
>
> This error happens because the signature contains 257 bytes, including
> a leading zero as the first element.
>
> Fix the problem by stripping off the leading zero from input data
> before feeding it to the CAAM accelerator.
>
> Fixes: 8c419778ab57e497b5 ("crypto: caam - add support for RSA algorithm")
> Cc: <stable@vger.kernel.org>
> Reported-by: Martin Townsend <mtownsend1973@gmail.com>
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
> ---
> Changes since v2:
> - Check if the lenght is zero after calling caam_rsa_drop_leading_zeros()
>
>  drivers/crypto/caam/caampkc.c | 45 +++++++++++++++++++++++++++++++++++--------
>  1 file changed, 37 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/crypto/caam/caampkc.c b/drivers/crypto/caam/caampkc.c
> index 7a897209..47467ff 100644
> --- a/drivers/crypto/caam/caampkc.c
> +++ b/drivers/crypto/caam/caampkc.c
> @@ -166,6 +166,14 @@ static void rsa_priv_f3_done(struct device *dev, u32 *desc, u32 err,
>         akcipher_request_complete(req, err);
>  }
>
> +static void caam_rsa_drop_leading_zeros(const u8 **ptr, size_t *nbytes)
> +{
> +       while (!**ptr && *nbytes) {
> +               (*ptr)++;
> +               (*nbytes)--;
> +       }
> +}
> +
>  static struct rsa_edesc *rsa_edesc_alloc(struct akcipher_request *req,
>                                          size_t desclen)
>  {
> @@ -178,7 +186,36 @@ static struct rsa_edesc *rsa_edesc_alloc(struct akcipher_request *req,
>         int sgc;
>         int sec4_sg_index, sec4_sg_len = 0, sec4_sg_bytes;
>         int src_nents, dst_nents;
> +       const u8 *temp;
> +       void *buffer;
> +       size_t len;
> +
> +       buffer = kzalloc(req->src_len, GFP_ATOMIC);
> +       if (!buffer)
> +               return ERR_PTR(-ENOMEM);
> +
> +       sg_copy_to_buffer(req->src, sg_nents(req->src),
> +                         buffer, req->src_len);
> +       temp = (u8 *)buffer;
> +       len = req->src_len;
>
> +       /*
> +        * Check if the buffer contains leading zeros and if
> +        * it does, drop the leading zeros
> +        */
> +       if (temp[0] == 0) {
> +               caam_rsa_drop_leading_zeros(&temp, &len);
> +               if (!len) {
> +                       kfree(buffer);
> +                       return ERR_PTR(-ENOMEM);
> +               }
> +
> +               req->src_len = len;
> +               sg_copy_from_buffer(req->src, sg_nents(req->src),
> +                                   (void *)temp, req->src_len);
> +       }
> +
> +       kfree(buffer);
>         src_nents = sg_nents_for_len(req->src, req->src_len);
>         dst_nents = sg_nents_for_len(req->dst, req->dst_len);
>
> @@ -683,14 +720,6 @@ static void caam_rsa_free_key(struct caam_rsa_key *key)
>         memset(key, 0, sizeof(*key));
>  }
>
> -static void caam_rsa_drop_leading_zeros(const u8 **ptr, size_t *nbytes)
> -{
> -       while (!**ptr && *nbytes) {
> -               (*ptr)++;
> -               (*nbytes)--;
> -       }
> -}
> -
>  /**
>   * caam_read_rsa_crt - Used for reading dP, dQ, qInv CRT members.
>   * dP, dQ and qInv could decode to less than corresponding p, q length, as the
> --
> 2.7.4
>

Hi Fabio,

just tried it and it works fine on my i.MX6UL board running linux-imx
4.9 (had to manually apply the patch as it doesn't have
caam_rsa_drop_leading_zeros) so a
Reviewed and Tested-By Martin Townsend

Many Thanks,
Martin.

Re: [PATCH v3] crypto: caam: Drop leading zero from input buffer

[Horia Geantă]

On 4/15/2018 6:51 PM, Martin Townsend wrote:
> On Sun, Apr 15, 2018 at 3:12 PM, Fabio Estevam <festevam@gmail.com> wrote:
>> From: Fabio Estevam <fabio.estevam@nxp.com>
>>
>> imx6ul and imx7 report the following error:
>>
>> caam_jr 2142000.jr1: 40000789: DECO: desc idx 7:
>> Protocol Size Error - A protocol has seen an error in size. When
>> running RSA, pdb size N < (size of F) when no formatting is used; or
>> pdb size N < (F + 11) when formatting is used.
>>
>> ------------[ cut here ]------------
>> WARNING: CPU: 0 PID: 1 at crypto/asymmetric_keys/public_key.c:148
>> public_key_verify_signature+0x27c/0x2b0
>>
>> This error happens because the signature contains 257 bytes, including
>> a leading zero as the first element.
>>
>> Fix the problem by stripping off the leading zero from input data
>> before feeding it to the CAAM accelerator.
>>
>> Fixes: 8c419778ab57e497b5 ("crypto: caam - add support for RSA algorithm")
>> Cc: <stable@vger.kernel.org>
>> Reported-by: Martin Townsend <mtownsend1973@gmail.com>
>> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
>> ---
>> Changes since v2:
>> - Check if the lenght is zero after calling caam_rsa_drop_leading_zeros()
>>
>>  drivers/crypto/caam/caampkc.c | 45 +++++++++++++++++++++++++++++++++++--------
>>  1 file changed, 37 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/crypto/caam/caampkc.c b/drivers/crypto/caam/caampkc.c
>> index 7a897209..47467ff 100644
>> --- a/drivers/crypto/caam/caampkc.c
>> +++ b/drivers/crypto/caam/caampkc.c
>> @@ -166,6 +166,14 @@ static void rsa_priv_f3_done(struct device *dev, u32 *desc, u32 err,
>>         akcipher_request_complete(req, err);
>>  }
>>
>> +static void caam_rsa_drop_leading_zeros(const u8 **ptr, size_t *nbytes)
>> +{
>> +       while (!**ptr && *nbytes) {
>> +               (*ptr)++;
>> +               (*nbytes)--;
>> +       }
>> +}
>> +
>>  static struct rsa_edesc *rsa_edesc_alloc(struct akcipher_request *req,
>>                                          size_t desclen)
>>  {
>> @@ -178,7 +186,36 @@ static struct rsa_edesc *rsa_edesc_alloc(struct akcipher_request *req,
>>         int sgc;
>>         int sec4_sg_index, sec4_sg_len = 0, sec4_sg_bytes;
>>         int src_nents, dst_nents;
>> +       const u8 *temp;
>> +       void *buffer;
>> +       size_t len;
>> +
>> +       buffer = kzalloc(req->src_len, GFP_ATOMIC);
>> +       if (!buffer)
>> +               return ERR_PTR(-ENOMEM);
>> +
>> +       sg_copy_to_buffer(req->src, sg_nents(req->src),
>> +                         buffer, req->src_len);
>> +       temp = (u8 *)buffer;
>> +       len = req->src_len;
>>
>> +       /*
>> +        * Check if the buffer contains leading zeros and if
>> +        * it does, drop the leading zeros
>> +        */
>> +       if (temp[0] == 0) {
>> +               caam_rsa_drop_leading_zeros(&temp, &len);
>> +               if (!len) {
>> +                       kfree(buffer);
>> +                       return ERR_PTR(-ENOMEM);
>> +               }
>> +
>> +               req->src_len = len;
>> +               sg_copy_from_buffer(req->src, sg_nents(req->src),
>> +                                   (void *)temp, req->src_len);
>> +       }
>> +
>> +       kfree(buffer);
>>         src_nents = sg_nents_for_len(req->src, req->src_len);
>>         dst_nents = sg_nents_for_len(req->dst, req->dst_len);
>>
>> @@ -683,14 +720,6 @@ static void caam_rsa_free_key(struct caam_rsa_key *key)
>>         memset(key, 0, sizeof(*key));
>>  }
>>
>> -static void caam_rsa_drop_leading_zeros(const u8 **ptr, size_t *nbytes)
>> -{
>> -       while (!**ptr && *nbytes) {
>> -               (*ptr)++;
>> -               (*nbytes)--;
>> -       }
>> -}
>> -
>>  /**
>>   * caam_read_rsa_crt - Used for reading dP, dQ, qInv CRT members.
>>   * dP, dQ and qInv could decode to less than corresponding p, q length, as the
>> --
>> 2.7.4
>>
> 
> Hi Fabio,
> 
> just tried it and it works fine on my i.MX6UL board running linux-imx
> 4.9 (had to manually apply the patch as it doesn't have
> caam_rsa_drop_leading_zeros) so a
> Reviewed and Tested-By Martin Townsend
> 
I've sent a fix that does not copy data back and forth, instead it counts the
leading zeros and ffwds the S/G.
Please check it works in your case.

Thanks,
Horia