[U-Boot] [PATCH V2 12/12] imx: mx7dsabresd: add board revision check

[Peng Fan <peng.fan@nxp.com>]

> -----Original Message-----
> From: Stefano Babic [mailto:sbabic at denx.de]
> Sent: Thursday, May 18, 2017 4:20 PM
> To: Peng Fan <peng.fan@nxp.com>; Fabio Estevam <festevam@gmail.com>
> Cc: Stefano Babic <sbabic@denx.de>; U-Boot-Denx <u-boot@lists.denx.de>
> Subject: Re: [U-Boot] [PATCH V2 12/12] imx: mx7dsabresd: add board revision
> check
> 
> Hi Peng,

Hi Stefano,

> 
> On 18/04/2017 02:54, Peng Fan wrote:
> > Hi Fabio,
> >
> >> -----Original Message-----
> >> From: Fabio Estevam [mailto:festevam at gmail.com]
> >> Sent: Monday, April 17, 2017 11:00 PM
> >> To: Peng Fan <peng.fan@nxp.com>
> >> Cc: Stefano Babic <sbabic@denx.de>; U-Boot-Denx
> >> <u-boot@lists.denx.de>
> >> Subject: Re: [U-Boot] [PATCH V2 12/12] imx: mx7dsabresd: add board
> >> revision check
> >>
> >> On Thu, Apr 13, 2017 at 3:10 AM, Peng Fan <peng.fan@nxp.com> wrote:
> >>
> >>> +#define BOARD_REV_C  0x300
> >>> +#define BOARD_REV_B  0x200
> >>> +#define BOARD_REV_A  0x100
> >>> +
> >>> +static int mx7sabre_rev(void)
> >>> +{
> >>> +       /*
> >>> +        * Get Board ID information from OCOTP_GP1[15:8]
> >>> +        * i.MX7D SDB RevA: 0x41
> >>> +        * i.MX7D SDB RevB: 0x42
> >>
> >> Isn't this versioning scheme shared with other NXP boards? If so, it
> >> would be better to put this in common code.
> >
> > I prefer to keep the code here. There are board revision fuse for the
> > boards from NXP, but this is not always true, I think.
> >
> 
> Patches 1..11 are free of comments. I am merging them and I will send PR to
> Tom for inclusion after my build test. I will just let this last one out.

It is ok for me to let this out. Thanks.

Thanks,
Peng.

> 
> Regards,
> Stefano
> 
> 
> --
> ============================================================
> =========
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
> ============================================================
> =========