From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rajesh Bhagat Date: Fri, 18 Jan 2019 05:14:29 +0000 Subject: [U-Boot] [PATCH 2/7] drivers: ifc: restore the legacy flow for IFC config In-Reply-To: References: <20181227045609.24341-1-rajesh.bhagat@nxp.com> <20181227045609.24341-3-rajesh.bhagat@nxp.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > -----Original Message----- > From: York Sun > Sent: Friday, January 18, 2019 2:43 AM > To: Rajesh Bhagat ; u-boot at lists.denx.de > Cc: Prabhakar Kushwaha ; Pankit Garg > > Subject: Re: [PATCH 2/7] drivers: ifc: restore the legacy flow for IFC config > > On 12/26/18 8:37 PM, Rajesh Bhagat wrote: > > Restore the legacy flow along with TFABOOT flow for IFC configuration. > > What's the reason to go back to old flow? > Hi York, IFC configuration was made dynamic instead of static in previous patch in TF-A and non TF-A mode. Though dynamic configuration works fine for all the platforms in TF-A mode, it is broken for non TF-A mode on some of the platforms like ls1021atwr, ls1021aqds, ls1043ardb and ls1046aqds. This patch adds the static configuration back for non TF-A mode to support above platforms. Regards, Rajesh Bhagat > York