All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: kholk11@gmail.com
Cc: agross@kernel.org, sboyd@kernel.org, marijns95@gmail.com,
	konradybcio@gmail.com, martin.botka1@gmail.com,
	linux-arm-msm@vger.kernel.org, phone-devel@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/5] clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
Date: Fri, 4 Dec 2020 23:16:53 -0600	[thread overview]
Message-ID: <X8sXxc8rAXaj8zCa@builder.lan> (raw)
In-Reply-To: <20200926130306.13843-5-kholk11@gmail.com>

On Sat 26 Sep 08:03 CDT 2020, kholk11@gmail.com wrote:

> From: AngeloGioacchino Del Regno <kholk11@gmail.com>
> 
> The GPUCC manages the clocks for the Adreno GPU found on the
> SDM630, SDM636, SDM660 SoCs.
> 
> Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
> ---
>  drivers/clk/qcom/Kconfig                      |   9 +
>  drivers/clk/qcom/Makefile                     |   1 +
>  drivers/clk/qcom/gpucc-sdm660.c               | 349 ++++++++++++++++++
>  include/dt-bindings/clock/qcom,gpucc-sdm660.h |  28 ++
>  4 files changed, 387 insertions(+)
>  create mode 100644 drivers/clk/qcom/gpucc-sdm660.c
>  create mode 100644 include/dt-bindings/clock/qcom,gpucc-sdm660.h
> 
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index a12d37a4d729..377fba33d041 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -366,6 +366,15 @@ config SDM_MMCC_660
>  	  Say Y if you want to support multimedia devices such as display,
>  	  graphics, video encode/decode, camera, etc.
>  
> +config SDM_GPUCC_660
> +	tristate "SDM660 Graphics Clock Controller"
> +	select SDM_GCC_660
> +	select QCOM_GDSC
> +	help
> +	  Support for the graphics clock controller on SDM630/636/660 devices.
> +	  Say Y if you want to support graphics controller devices and
> +	  functionality such as 3D graphics
> +
>  config QCS_TURING_404
>  	tristate "QCS404 Turing Clock Controller"
>  	help
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index ada4f1bbe203..6a6906a62f96 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -61,6 +61,7 @@ obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o
>  obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o
>  obj-$(CONFIG_SDM_GCC_660) += gcc-sdm660.o
>  obj-$(CONFIG_SDM_MMCC_660) += mmcc-sdm660.o
> +obj-$(CONFIG_SDM_GPUCC_660) += gpucc-sdm660.o
>  obj-$(CONFIG_SDM_GCC_845) += gcc-sdm845.o
>  obj-$(CONFIG_SDM_GPUCC_845) += gpucc-sdm845.o
>  obj-$(CONFIG_SDM_LPASSCC_845) += lpasscc-sdm845.o
> diff --git a/drivers/clk/qcom/gpucc-sdm660.c b/drivers/clk/qcom/gpucc-sdm660.c
> new file mode 100644
> index 000000000000..447a34aaa21f
> --- /dev/null
> +++ b/drivers/clk/qcom/gpucc-sdm660.c
> @@ -0,0 +1,349 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/err.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +#include <linux/reset-controller.h>
> +#include <dt-bindings/clock/qcom,gpucc-sdm660.h>
> +
> +#include "clk-alpha-pll.h"
> +#include "common.h"
> +#include "clk-regmap.h"
> +#include "clk-pll.h"
> +#include "clk-rcg.h"
> +#include "clk-branch.h"
> +#include "gdsc.h"
> +#include "reset.h"
> +
> +enum {
> +	P_GPU_XO,
> +	P_CORE_BI_PLL_TEST_SE,
> +	P_GPLL0_OUT_MAIN,
> +	P_GPLL0_OUT_MAIN_DIV,
> +	P_GPU_PLL0_PLL_OUT_MAIN,
> +	P_GPU_PLL1_PLL_OUT_MAIN,
> +};
> +
> +static struct clk_branch gpucc_cxo_clk = {
> +	.halt_reg = 0x1020,
> +	.clkr = {
> +		.enable_reg = 0x1020,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpucc_cxo_clk",
> +			.parent_data = &(const struct clk_parent_data){
> +				.fw_name = "xo",
> +				.name = "xo"
> +			},
> +			.num_parents = 1,
> +			.ops = &clk_branch2_ops,
> +			.flags = CLK_IS_CRITICAL,
> +		},
> +	},
> +};
> +
> +static struct pll_vco gpu_vco[] = {
> +	{ 1000000000, 2000000000, 0 },
> +	{ 500000000,  1000000000, 2 },
> +	{ 250000000,   500000000, 3 },
> +};
> +
> +static struct clk_alpha_pll gpu_pll0_pll_out_main = {
> +	.offset = 0x0,
> +	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
> +	.vco_table = gpu_vco,
> +	.num_vco = ARRAY_SIZE(gpu_vco),
> +	.clkr.hw.init = &(struct clk_init_data){
> +		.name = "gpu_pll0_pll_out_main",
> +		.parent_data =  &(const struct clk_parent_data){
> +			.hw = &gpucc_cxo_clk.clkr.hw,
> +		},
> +		.num_parents = 1,
> +		.ops = &clk_alpha_pll_ops,
> +	},
> +};
> +
> +static struct clk_alpha_pll gpu_pll1_pll_out_main = {
> +	.offset = 0x40,
> +	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
> +	.vco_table = gpu_vco,
> +	.num_vco = ARRAY_SIZE(gpu_vco),
> +	.clkr.hw.init = &(struct clk_init_data){
> +		.name = "gpu_pll1_pll_out_main",
> +		.parent_data = &(const struct clk_parent_data){
> +			.hw = &gpucc_cxo_clk.clkr.hw,
> +		},
> +		.num_parents = 1,
> +		.ops = &clk_alpha_pll_ops,
> +	},
> +};
> +
> +static const struct parent_map gpucc_parent_map_1[] = {
> +	{ P_GPU_XO, 0 },
> +	{ P_GPU_PLL0_PLL_OUT_MAIN, 1 },
> +	{ P_GPU_PLL1_PLL_OUT_MAIN, 3 },
> +	{ P_GPLL0_OUT_MAIN, 5 },
> +};
> +
> +static const struct clk_parent_data gpucc_parent_data_1[] = {
> +	{ .hw = &gpucc_cxo_clk.clkr.hw },
> +	{ .hw = &gpu_pll0_pll_out_main.clkr.hw },
> +	{ .hw = &gpu_pll1_pll_out_main.clkr.hw },
> +	{ .fw_name = "gcc_gpu_gpll0_clk", .name = "gcc_gpu_gpll0_clk" },
> +};
> +
> +static struct clk_rcg2_gfx3d gfx3d_clk_src = {
> +	.div = 2,
> +	.rcg = {
> +		.cmd_rcgr = 0x1070,
> +		.mnd_width = 0,
> +		.hid_width = 5,
> +		.parent_map = gpucc_parent_map_1,
> +		.clkr.hw.init = &(struct clk_init_data){
> +			.name = "gfx3d_clk_src",
> +			.parent_data = gpucc_parent_data_1,
> +			.num_parents = 4,
> +			.ops = &clk_gfx3d_ops,
> +			.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
> +		},
> +	},
> +	.hws = (struct clk_hw*[]){
> +		&gpucc_cxo_clk.clkr.hw,
> +		&gpu_pll0_pll_out_main.clkr.hw,
> +		&gpu_pll1_pll_out_main.clkr.hw,
> +	}
> +};
> +
> +static struct clk_branch gpucc_gfx3d_clk = {
> +	.halt_reg = 0x1098,
> +	.halt_check = BRANCH_HALT,
> +	.hwcg_reg = 0x1098,
> +	.hwcg_bit = 1,
> +	.clkr = {
> +		.enable_reg = 0x1098,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpucc_gfx3d_clk",
> +			.parent_data = &(const struct clk_parent_data){
> +				.hw = &gfx3d_clk_src.rcg.clkr.hw,
> +			},
> +			.num_parents = 1,
> +			.ops = &clk_branch2_ops,
> +			.flags = CLK_SET_RATE_PARENT,
> +		},
> +	},
> +};
> +
> +static const struct parent_map gpucc_parent_map_0[] = {
> +	{ P_GPU_XO, 0 },
> +	{ P_GPLL0_OUT_MAIN, 5 },
> +	{ P_GPLL0_OUT_MAIN_DIV, 6 },
> +};
> +
> +static const struct clk_parent_data gpucc_parent_data_0[] = {
> +	{ .hw = &gpucc_cxo_clk.clkr.hw },
> +	{ .fw_name = "gcc_gpu_gpll0_clk", .name = "gcc_gpu_gpll0_clk" },
> +	{ .fw_name = "gcc_gpu_gpll0_div_clk", .name = "gcc_gpu_gpll0_div_clk" },
> +};
> +
> +static const struct freq_tbl ftbl_rbbmtimer_clk_src[] = {
> +	F(19200000, P_GPU_XO, 1, 0, 0),
> +	{ }
> +};
> +
> +static struct clk_rcg2 rbbmtimer_clk_src = {
> +	.cmd_rcgr = 0x10b0,
> +	.mnd_width = 0,
> +	.hid_width = 5,
> +	.parent_map = gpucc_parent_map_0,
> +	.freq_tbl = ftbl_rbbmtimer_clk_src,
> +	.clkr.hw.init = &(struct clk_init_data){
> +		.name = "rbbmtimer_clk_src",
> +		.parent_data = gpucc_parent_data_0,
> +		.num_parents = 3,
> +		.ops = &clk_rcg2_ops,
> +	},
> +};
> +
> +static const struct freq_tbl ftbl_rbcpr_clk_src[] = {
> +	F(19200000, P_GPU_XO, 1, 0, 0),
> +	F(50000000, P_GPLL0_OUT_MAIN_DIV, 6, 0, 0),
> +	{ }
> +};
> +
> +static struct clk_rcg2 rbcpr_clk_src = {
> +	.cmd_rcgr = 0x1030,
> +	.mnd_width = 0,
> +	.hid_width = 5,
> +	.parent_map = gpucc_parent_map_0,
> +	.freq_tbl = ftbl_rbcpr_clk_src,
> +	.clkr.hw.init = &(struct clk_init_data){
> +		.name = "rbcpr_clk_src",
> +		.parent_data = gpucc_parent_data_0,
> +		.num_parents = 3,
> +		.ops = &clk_rcg2_ops,
> +	},
> +};
> +
> +static struct clk_branch gpucc_rbbmtimer_clk = {
> +	.halt_reg = 0x10d0,
> +	.halt_check = BRANCH_HALT,
> +	.clkr = {
> +		.enable_reg = 0x10d0,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpucc_rbbmtimer_clk",
> +			.parent_names = (const char *[]){
> +				"rbbmtimer_clk_src",
> +			},
> +			.num_parents = 1,
> +			.flags = CLK_SET_RATE_PARENT,
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpucc_rbcpr_clk = {
> +	.halt_reg = 0x1054,
> +	.halt_check = BRANCH_HALT,
> +	.clkr = {
> +		.enable_reg = 0x1054,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpucc_rbcpr_clk",
> +			.parent_names = (const char *[]){
> +				"rbcpr_clk_src",
> +			},
> +			.num_parents = 1,
> +			.flags = CLK_SET_RATE_PARENT,
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct gdsc gpu_cx_gdsc = {
> +	.gdscr = 0x1004,
> +	.gds_hw_ctrl = 0x1008,
> +	.pd = {
> +		.name = "gpu_cx",
> +	},
> +	.pwrsts = PWRSTS_OFF_ON,
> +	.flags = VOTABLE,
> +};
> +
> +static struct gdsc gpu_gx_gdsc = {
> +	.gdscr = 0x1094,
> +	.clamp_io_ctrl = 0x130,
> +	.resets = (unsigned int []){ GPU_GX_BCR },
> +	.reset_count = 1,
> +	.cxcs = (unsigned int []){ 0x1098 },
> +	.cxc_count = 1,
> +	.pd = {
> +		.name = "gpu_gx",
> +	},
> +	.parent = &gpu_cx_gdsc.pd,
> +	.pwrsts = PWRSTS_OFF | PWRSTS_ON | PWRSTS_RET,
> +	.flags = CLAMP_IO | SW_RESET | AON_RESET | NO_RET_PERIPH,
> +	//.supply = "vdd-gx";
> +};
> +
> +static struct gdsc *gpucc_sdm660_gdscs[] = {
> +	[GPU_CX_GDSC] = &gpu_cx_gdsc,
> +	[GPU_GX_GDSC] = &gpu_gx_gdsc,
> +};
> +
> +static const struct qcom_reset_map gpucc_sdm660_resets[] = {
> +	[GPU_CX_BCR] = { 0x1000 },
> +	[RBCPR_BCR] = { 0x1050 },
> +	[GPU_GX_BCR] = { 0x1090 },
> +	[SPDM_BCR] = { 0x10E0 },
> +};
> +
> +static struct clk_regmap *gpucc_sdm660_clocks[] = {
> +	[GPUCC_CXO_CLK] = &gpucc_cxo_clk.clkr,
> +	[GPU_PLL0_PLL] = &gpu_pll0_pll_out_main.clkr,
> +	[GPU_PLL1_PLL] = &gpu_pll1_pll_out_main.clkr,
> +	[GFX3D_CLK_SRC] = &gfx3d_clk_src.rcg.clkr,
> +	[RBCPR_CLK_SRC] = &rbcpr_clk_src.clkr,
> +	[RBBMTIMER_CLK_SRC] = &rbbmtimer_clk_src.clkr,
> +	[GPUCC_RBCPR_CLK] = &gpucc_rbcpr_clk.clkr,
> +	[GPUCC_GFX3D_CLK] = &gpucc_gfx3d_clk.clkr,
> +	[GPUCC_RBBMTIMER_CLK] = &gpucc_rbbmtimer_clk.clkr,
> +};
> +
> +static const struct regmap_config gpucc_660_regmap_config = {
> +	.reg_bits	= 32,
> +	.reg_stride	= 4,
> +	.val_bits	= 32,
> +	.max_register	= 0x9034,
> +	.fast_io	= true,
> +};
> +
> +static const struct qcom_cc_desc gpucc_sdm660_desc = {
> +	.config = &gpucc_660_regmap_config,
> +	.clks = gpucc_sdm660_clocks,
> +	.num_clks = ARRAY_SIZE(gpucc_sdm660_clocks),
> +	.resets = gpucc_sdm660_resets,
> +	.num_resets = ARRAY_SIZE(gpucc_sdm660_resets),
> +	.gdscs = gpucc_sdm660_gdscs,
> +	.num_gdscs = ARRAY_SIZE(gpucc_sdm660_gdscs),
> +};
> +
> +static const struct of_device_id gpucc_sdm660_match_table[] = {
> +	{ .compatible = "qcom,gpucc-sdm660" },
> +	{ .compatible = "qcom,gpucc-sdm630" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, gpucc_sdm660_match_table);
> +
> +static int gpucc_sdm660_probe(struct platform_device *pdev)
> +{
> +	struct regmap *regmap;
> +	struct alpha_pll_config gpu_pll_config = {
> +		.config_ctl_val = 0x4001055b,
> +		.alpha = 0xaaaaab00,
> +		.alpha_en_mask = BIT(24),
> +		.vco_val = 0x2 << 20,
> +		.vco_mask = 0x3 << 20,
> +		.main_output_mask = 0x1,
> +	};
> +
> +	regmap = qcom_cc_map(pdev, &gpucc_sdm660_desc);
> +	if (IS_ERR(regmap))
> +		return PTR_ERR(regmap);
> +
> +	/* 800MHz configuration for GPU PLL0 */
> +	gpu_pll_config.l = 0x29;
> +	gpu_pll_config.alpha_hi = 0xaa;
> +	clk_alpha_pll_configure(&gpu_pll0_pll_out_main, regmap, &gpu_pll_config);
> +
> +	/* 740MHz configuration for GPU PLL1 */
> +	gpu_pll_config.l = 0x26;
> +	gpu_pll_config.alpha_hi = 0x8a;
> +	clk_alpha_pll_configure(&gpu_pll1_pll_out_main, regmap, &gpu_pll_config);
> +
> +	return qcom_cc_really_probe(pdev, &gpucc_sdm660_desc, regmap);
> +}
> +
> +static struct platform_driver gpucc_sdm660_driver = {
> +	.probe		= gpucc_sdm660_probe,
> +	.driver		= {
> +		.name	= "gpucc-sdm660",
> +		.of_match_table = gpucc_sdm660_match_table,
> +	},
> +};
> +module_platform_driver(gpucc_sdm660_driver);
> +
> +MODULE_DESCRIPTION("QCOM GPUCC SDM660/630 Driver");
> +MODULE_LICENSE("GPL v2");

I think this part looks good. So for this part you have my:

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>


> diff --git a/include/dt-bindings/clock/qcom,gpucc-sdm660.h b/include/dt-bindings/clock/qcom,gpucc-sdm660.h
> new file mode 100644
> index 000000000000..680eaabd838d
> --- /dev/null
> +++ b/include/dt-bindings/clock/qcom,gpucc-sdm660.h
> @@ -0,0 +1,28 @@
> +/* SPDX-License-Identifier: GPL-2.0 */

But please move this to the binding, reorder them and please update the
license to "GPL-2.0-only OR BSD-2-Clause".

Regards,
Bjorn

> +/*
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_SDM_GPUCC_660_H
> +#define _DT_BINDINGS_CLK_SDM_GPUCC_660_H
> +
> +#define GPUCC_CXO_CLK			0
> +#define GPU_PLL0_PLL			1
> +#define GPU_PLL1_PLL			2
> +#define GFX3D_CLK_SRC			3
> +#define RBCPR_CLK_SRC			4
> +#define RBBMTIMER_CLK_SRC		5
> +#define GPUCC_RBCPR_CLK			6
> +#define GPUCC_GFX3D_CLK			7
> +#define GPUCC_RBBMTIMER_CLK		8
> +
> +#define GPU_CX_GDSC			0
> +#define GPU_GX_GDSC			1
> +
> +#define GPU_CX_BCR			0
> +#define GPU_GX_BCR			1
> +#define RBCPR_BCR			2
> +#define SPDM_BCR			3
> +
> +#endif
> -- 
> 2.28.0
> 

  parent reply	other threads:[~2020-12-05  5:17 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-26 13:03 [PATCH 0/5] SDM630/660 Multimedia and GPU clock controllers kholk11
2020-09-26 13:03 ` [PATCH 1/5] clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver kholk11
2020-09-26 13:23   ` Martin Botka
2020-09-30 20:47   ` kernel test robot
2020-09-30 20:47     ` kernel test robot
2020-10-13 14:51     ` Martin Botka
2020-10-13 15:01       ` Martin Botka
2020-12-05  4:59   ` Bjorn Andersson
2020-09-26 13:03 ` [PATCH 2/5] dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc kholk11
2020-09-26 13:03 ` [PATCH 3/5] clk: qcom: mmcc-sdm660: Add MDP clock source CXC to MDSS GDSC kholk11
2020-12-05  5:08   ` Bjorn Andersson
2021-01-09 18:39     ` AngeloGioacchino Del Regno
2020-09-26 13:03 ` [PATCH 4/5] clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver kholk11
2020-09-26 13:29   ` Martin Botka
2020-09-30 20:46   ` kernel test robot
2020-09-30 20:46     ` kernel test robot
2020-09-30 21:58     ` AngeloGioacchino Del Regno
2020-10-02  5:39       ` Philip Li
2020-10-02  5:39         ` Philip Li
2020-12-05  5:16   ` Bjorn Andersson [this message]
2020-09-26 13:03 ` [PATCH 5/5] dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings kholk11
2020-09-26 13:30   ` Martin Botka
2020-12-05  5:14   ` Bjorn Andersson
2020-12-04 18:16 ` [PATCH 0/5] SDM630/660 Multimedia and GPU clock controllers AngeloGioacchino Del Regno

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=X8sXxc8rAXaj8zCa@builder.lan \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=kholk11@gmail.com \
    --cc=konradybcio@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marijns95@gmail.com \
    --cc=martin.botka1@gmail.com \
    --cc=phone-devel@vger.kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.