From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 4CE0DC433FE for ; Mon, 28 Nov 2022 14:09:40 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232373AbiK1OJi (ORCPT ); Mon, 28 Nov 2022 09:09:38 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:33574 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232392AbiK1OJL (ORCPT ); Mon, 28 Nov 2022 09:09:11 -0500 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [213.167.242.64]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E251320F6B for ; Mon, 28 Nov 2022 06:08:42 -0800 (PST) Received: from pendragon.ideasonboard.com (62-78-145-57.bb.dnainternet.fi [62.78.145.57]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 21FDF501; Mon, 28 Nov 2022 15:08:41 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1669644521; bh=saBh46M1dNkqNwWJ+cw6/OM7duxvAFyn3hhAPhQLUd0=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=RDZo9hAa9k2qpCKLlXtQkKQUTllavUVIEzA0/+1nxnjtQzLu/8Y+2ZBk0j5Ih/4Vt Z9iMiom3XRgcqCbf/NusuA1ZB/+nxC+cMRUHKQd6UvXU++bro09ZjJbMLWXd1ekB+M T0moHDohJ4zPi1gd+4oWCoeTjIlGM4tQiMyFDL9k= Date: Mon, 28 Nov 2022 16:08:26 +0200 From: Laurent Pinchart To: Petko Manolov Cc: linux-media@vger.kernel.org, sakari.ailus@iki.fi Subject: Re: [PATCH v1 3/5] media: i2c: imx492: driver's source Message-ID: References: <20221125153120.541298-1-petko.manolov@konsulko.com> <20221125153120.541298-4-petko.manolov@konsulko.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Hi Petko, On Mon, Nov 28, 2022 at 03:42:27PM +0200, Petko Manolov wrote: > On 22-11-28 07:16:22, Laurent Pinchart wrote: > > On Fri, Nov 25, 2022 at 05:31:18PM +0200, Petko Manolov wrote: > > > imx492 is a diagonal 23.1 mm (Type 1.4) CMOS image sensor with color or > > > monochrome square pixel array and approximately 47.08 M effective pixels. 12-bit > > > digital output makes it possible to output the signals with high definition for > > > moving pictures. It is programmable through I2C interface. The I2C client > > > address can be either 0x10 or 0x1a depending on SLASEL pin. Image data is sent > > > through MIPI CSI-2. > > > > > > Signed-off-by: Petko Manolov > > > --- > > > drivers/media/i2c/imx492.c | 1092 ++++++++++++++++++++++++++++++++++++ > > > 1 file changed, 1092 insertions(+) > > > create mode 100644 drivers/media/i2c/imx492.c > > > > > > diff --git a/drivers/media/i2c/imx492.c b/drivers/media/i2c/imx492.c > > > new file mode 100644 > > > index 000000000000..0713256b4b63 > > > --- /dev/null > > > +++ b/drivers/media/i2c/imx492.c > > > @@ -0,0 +1,1092 @@ > > > +// SPDX-License-Identifier: GPL-2.0-only > > > +/* > > > + * Sony imx492 Camera Sensor Driver (based on imx412.c source); > > > + * > > > + * Copyright (C) 2022 Petko Manolov > > > + */ > > > + > > > +#include > > > + > > > +#include > > > +#include > > > +#include > > > +#include > > > +#include > > > +#include > > > > There are missing headers, at least for GPIO. Please check if anything else is > > missing. > > The driver compiles cleanly. Not sure what i have to add here. That's because of indirect inclusion. That could change at any time, so it's good practice to explicitly include headers for all APIs used by the driver. > > > +#include > > > +#include > > > +#include > > > + > > > +#include "imx492.h" > > > + > > > +/* Streaming Mode */ > > > +#define IMX492_REG_MODE_SELECT 0x3000 > > > + > > > +/* Chip ID */ > > > +#define IMX492_ID 0x13 > > > + > > > +/* Analog gain control */ > > > +#define IMX492_REG_AGAIN 0x300a > > > +#define IMX492_AGAIN_MIN 0 > > > +#define IMX492_AGAIN_MAX 978 > > > +#define IMX492_AGAIN_STEP 1 > > > +#define IMX492_AGAIN_DEFAULT 0 > > > + > > > +/* Group hold register */ > > > +#define IMX492_REG_HOLD 0x302b > > > +#define IMX492_REG_XMSTA 0x3033 > > > +#define IMX492_REG_SYSCLKEN 0x35e5 > > > > You can replace the first tab (just after #define) with a space. > > OK. > > > > +/* CSI2 HW configuration */ > > > +#define IMX492_LINK_FREQ 745000000 > > > +#define IMX492_NUM_DATA_LANES 4 > > > + > > > +#define IMX492_REG_MIN 0x3000 > > > +#define IMX492_REG_MAX 0xffff > > > + > > > +/* *** */ > > > + > > > +#define IMX492_REG_STANDBY IMX492_REG_MODE_SELECT > > > > No aliases for register names please, that's confusing. > > This register is known with both of the above names in the documentation. I > strongly suspect that at least two different teams/persons at Sony had a go at > that document. > > Will select one of these names to avoid confusion. My experience with Sony sensors is that they often name bits but not registers. The registers then end up being named based on a particular bit they contain when writing drivers. > > > +#define IMX492_BIT_STANDBY 0x01 > > > +#define IMX492_BIT_STBLOGIC 0x02 > > > +#define IMX492_BIT_STBDV 0x10 > > > + > > > +#define IMX492_MODE_STANDBY (IMX492_BIT_STBDV | IMX492_BIT_STBLOGIC | IMX492_BIT_STANDBY) > > > +#define IMX492_MODE_STREAMING 0x00 > > > + > > > +#define IMX492_REG_TESTPTRN 0x303A > > > +#define IMX492_BIT_CLKEN 0x01 > > > +#define IMX492_BIT_TESTPTRN 0x10 > > > +#define IMX492_BITS_TPTRN_ON (IMX492_BIT_TESTPTRN | IMX492_BIT_CLKEN) > > > +#define IMX492_BITS_TPTRN_OFF 0x00 > > > + > > > +#define IMX492_REG_TESTPATSEL 0x303B > > > +#define IMX492_BIT_TPAT00 0x00 > > > +#define IMX492_BIT_TPAT01 0x01 > > > +#define IMX492_BIT_TPAT02 0x02 > > > +#define IMX492_BIT_TPAT03 0x03 > > > +#define IMX492_BIT_TPAT0A 0x0A > > > +#define IMX492_BIT_TPAT0B 0x0B > > > + > > > +#define IMX492_EXPOSURE_MIN 8 > > > +#define IMX492_EXPOSURE_OFFSET 22 > > > +#define IMX492_EXPOSURE_STEP 1 > > > +#define IMX492_EXPOSURE_DEFAULT 0x0648 > > > + > > > +#define DEFAULT_FPS 6 > > > + > > > +/** > > > + * struct imx492_reg_list - imx492 sensor register list > > > + * @num_of_regs: Number of registers in the list > > > + * @regs: Pointer to register list > > > + */ > > > +struct imx492_reg_list { > > > + u32 num_of_regs; > > > + const struct imx492_reg *regs; > > > +}; > > > + > > > +/** > > > + * struct imx492_mode - imx492 sensor mode structure > > > + * @width: Frame width > > > + * @height: Frame height > > > + * @code: Format code > > > + * @hblank: Horizontal blanking in lines > > > + * @vblank: Vertical blanking in lines > > > + * @vblank_min: Minimum vertical blanking in lines > > > + * @vblank_max: Maximum vertical blanking in lines > > > + * @pclk: Sensor pixel clock > > > + * @link_freq_idx: Link frequency index > > > + * @reg_list: Register list for sensor mode > > > + */ > > > +struct imx492_mode { > > > + u32 width; > > > + u32 height; > > > + u32 code; > > > + u32 hblank; > > > + u32 hblank_min; > > > + u32 hblank_max; > > > + u32 vblank; > > > + u32 vblank_min; > > > + u32 vblank_max; > > > + u64 pclk; > > > + u32 link_freq_idx; > > > + struct imx492_reg_list reg_list; > > > +}; > > > + > > > +/** > > > + * struct imx492 - imx492 sensor device structure > > > + * @dev: Pointer to generic device > > > + * @client: Pointer to i2c client > > > + * @sd: V4L2 sub-device > > > + * @pad: Media pad. Only one pad supported > > > + * @reset_gpio: Sensor reset gpio > > > + * @reset_gpio: Sensor power gpio > > > + * @inclk: Sensor input clock > > > + * @supplies: Regulator supplies > > > + * @ctrl_handler: V4L2 control handler > > > + * @link_freq_ctrl: Pointer to link frequency control > > > + * @pclk_ctrl: Pointer to pixel clock control > > > + * @hblank_ctrl: Pointer to horizontal blanking control > > > + * @vblank_ctrl: Pointer to vertical blanking control > > > + * @exp_ctrl: Pointer to exposure control > > > + * @again_ctrl: Pointer to analog gain control > > > + * @vblank: Vertical blanking in lines > > > + * @cur_mode: Pointer to current selected sensor mode > > > + * @mutex: Mutex for serializing sensor controls > > > > Please use the same order for fields in the documentation and the > > structure defininition. > > Mkey. > > > > + * @streaming: Flag indicating streaming state > > > + */ > > > +struct imx492 { > > > + struct device *dev; > > > + struct i2c_client *client; > > > + struct v4l2_subdev sd; > > > + struct media_pad pad; > > > + struct v4l2_captureparm scap; > > > > This is set but never used. You can drop it. > > OK. > > > > + struct gpio_desc *reset_gpio; > > > + struct gpio_desc *power_gpio; > > > + struct gpio_desc *oscen_gpio; > > > + struct clk *inclk; > > > + struct v4l2_ctrl_handler ctrl_handler; > > > + struct v4l2_ctrl *link_freq_ctrl; > > > + struct v4l2_ctrl *pclk_ctrl; > > > + struct v4l2_ctrl *hblank_ctrl; > > > + struct v4l2_ctrl *vblank_ctrl; > > > + struct v4l2_ctrl *exp_ctrl; > > > + struct v4l2_ctrl *again_ctrl; > > > + const struct imx492_mode *cur_mode; > > > + struct mutex mutex; > > > + u32 tpatt; > > > > Not used, drop it. > > Ah, a left over. Will remove it. > > > > + u32 vblank; > > > + bool streaming; > > > +}; > > > + > > > +static const s64 link_freq[] = { > > > + IMX492_LINK_FREQ, > > > +}; > > > + > > > + > > > +/* Supported sensor mode configurations */ > > > +static const struct imx492_mode supported_modes[] = { > > > + { > > > + .width = 8192, > > > + .height = 4320, > > > + .hblank = 1108, > > > + .hblank_min = 1102, > > > + .hblank_max = 32768, > > > + .vblank = 5728, > > > + .vblank_min = 4428, > > > + .vblank_max = 32768, > > > + .pclk = 745000000, > > > + .link_freq_idx = 0, > > > + .code = MEDIA_BUS_FMT_SGBRG12_1X12, > > > + .reg_list = { > > > + .num_of_regs = ARRAY_SIZE(mode_17to9_regs), > > > + .regs = mode_17to9_regs, > > > + }, > > > + }, { > > > + .width = 8192, > > > + .height = 5556, > > > + .hblank = 1108, > > > + .hblank_min = 1102, > > > + .hblank_max = 32768, > > > + .vblank = 5728, > > > + .vblank_min = 4428, > > > + .vblank_max = 32768, > > > + .pclk = 745000000, > > > + .link_freq_idx = 0, > > > + .code = MEDIA_BUS_FMT_SGBRG12_1X12, > > > + .reg_list = { > > > + .num_of_regs = ARRAY_SIZE(mode_all_regs), > > > + .regs = mode_all_regs, > > > + }, > > > + }, > > > +}; > > > + > > > +static const char * const imx492_test_pattern_menu[] = { > > > + "Disabled", > > > + "Solid black", > > > + "Solid white", > > > + "Solid dark grey", > > > + "Solid light gray", > > > + "None", > > > + "None", > > > + "None", > > > + "None", > > > + "None", > > > + "None", > > > > Menu controls shouldn't have entries with identical names. All these should be > > dropped if they're not implemented by the sensor, or given a proper name. > > Err, this was easier to do. Will refactor... > > > > + "Vertical color bars", > > > + "Horizontal color bars", > > > +}; > > > + > > > +/** > > > + * to_imx492() - imx492 V4L2 sub-device to imx492 device. > > > + * @subdev: pointer to imx492 V4L2 sub-device > > > + * > > > + * Return: pointer to imx492 device > > > + */ > > > +static inline struct imx492 *to_imx492(struct v4l2_subdev *subdev) > > > +{ > > > + return container_of(subdev, struct imx492, sd); > > > +} > > > + > > > +/** > > > + * imx492_read_reg() - Read registers. > > > + * @imx492: pointer to imx492 device > > > + * @reg: register address > > > + * @len: length of bytes to read. Max supported bytes is 4 > > > + * @val: pointer to register value to be filled. > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static int imx492_read_reg(struct imx492 *imx492, u16 reg, u32 len, u32 *val) > > > +{ > > > + struct i2c_client *client = v4l2_get_subdevdata(&imx492->sd); > > > + struct i2c_msg msgs[2] = {0}; > > > + u8 addr_buf[2] = {0}; > > > + u8 data_buf[4] = {0}; > > > + int ret; > > > + > > > + if (WARN_ON(len > 4)) > > > + return -EINVAL; > > > + > > > + put_unaligned_be16(reg, addr_buf); > > > + > > > + /* Write register address */ > > > + msgs[0].addr = client->addr; > > > + msgs[0].flags = 0; > > > + msgs[0].len = ARRAY_SIZE(addr_buf); > > > + msgs[0].buf = addr_buf; > > > + > > > + /* Read data from register */ > > > + msgs[1].addr = client->addr; > > > + msgs[1].flags = I2C_M_RD; > > > + msgs[1].len = len; > > > + msgs[1].buf = &data_buf[4 - len]; > > > + > > > + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); > > > + if (ret != ARRAY_SIZE(msgs)) > > > + return -EIO; > > > + > > > + *val = get_unaligned_be32(data_buf); > > > + > > > + return 0; > > > +} > > > + > > > +/** > > > + * imx492_write_reg() - Write register > > > + * @imx492: pointer to imx492 device > > > + * @reg: register address > > > + * @len: length of bytes. Max supported bytes is 4 > > > + * @val: register value > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static int imx492_write_reg(struct imx492 *imx492, u16 reg, u32 len, u32 val) > > > +{ > > > + struct i2c_client *client = v4l2_get_subdevdata(&imx492->sd); > > > + u8 buf[6] = {0}; > > > + > > > + if (WARN_ON(len > 4)) > > > + return -EINVAL; > > > + > > > + put_unaligned_be16(reg, buf); > > > + put_unaligned_be32(val << (8 * (4 - len)), buf + 2); > > > + if (i2c_master_send(client, buf, len + 2) != len + 2) > > > + return -EIO; > > > + > > > + return 0; > > > +} > > > + > > > +/** > > > + * imx492_write_regs() - Write a list of registers > > > + * @imx492: pointer to imx492 device > > > + * @regs: list of registers to be written > > > + * @len: length of registers array > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static int imx492_write_regs(struct imx492 *imx492, > > > + const struct imx492_reg *regs, u32 len) > > > +{ > > > + unsigned int i; > > > + int ret; > > > + > > > + for (i = 0; i < len; i++) { > > > + ret = imx492_write_reg(imx492, regs[i].address, 1, regs[i].val); > > > + if (ret) > > > + return ret; > > > + } > > > + > > > + return 0; > > > +} > > > + > > > +static u32 imx492_get_format_code(struct imx492 *imx492, u32 code) > > > +{ > > > + /* for now this is the only format we support */ > > > + return MEDIA_BUS_FMT_SGBRG12_1X12; > > > +} > > > + > > > +/** > > > + * imx492_update_controls() - Update control ranges based on streaming mode > > > + * @imx492: pointer to imx492 device > > > + * @mode: pointer to imx492_mode sensor mode > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static int imx492_update_controls(struct imx492 *imx492, > > > + const struct imx492_mode *mode) > > > +{ > > > + int ret; > > > + > > > + ret = __v4l2_ctrl_s_ctrl(imx492->link_freq_ctrl, mode->link_freq_idx); > > > + if (ret) > > > + return ret; > > > + > > > + ret = __v4l2_ctrl_s_ctrl(imx492->hblank_ctrl, mode->hblank); > > > + if (ret) > > > + return ret; > > > + > > > + return __v4l2_ctrl_modify_range(imx492->vblank_ctrl, mode->vblank_min, > > > + mode->vblank_max, 1, mode->vblank); > > > +} > > > + > > > +/** > > > + * imx492_update_exp_gain() - Set updated exposure and gain > > > + * @imx492: pointer to imx492 device > > > + * @exposure: updated exposure value > > > + * @gain: updated analog gain value > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static int imx492_update_exp_gain(struct imx492 *imx492, u32 exposure, u32 gain) > > > +{ > > > + u32 lpfr, shutter; > > > + int ret; > > > + > > > + lpfr = imx492->vblank + imx492->cur_mode->height; > > > + shutter = lpfr - exposure; > > > + > > > + ret = imx492_write_reg(imx492, IMX492_REG_HOLD, 1, 1); > > > + if (ret) > > > + return ret; > > > + > > > + ret = imx492_write_reg(imx492, IMX492_REG_AGAIN, 2, gain); > > > + > > > + return ret; > > > +} > > > + > > > +/** > > > + * imx492_set_ctrl() - Set subdevice control > > > + * @ctrl: pointer to v4l2_ctrl structure > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static int imx492_set_ctrl(struct v4l2_ctrl *ctrl) > > > +{ > > > + struct imx492 *imx492 = > > > + container_of(ctrl->handler, struct imx492, ctrl_handler); > > > + u32 analog_gain; > > > + u32 exposure; > > > + int ret; > > > + > > > + switch (ctrl->id) { > > > + case V4L2_CID_VBLANK: > > > + imx492->vblank = imx492->vblank_ctrl->val; > > > + > > > + ret = __v4l2_ctrl_modify_range(imx492->exp_ctrl, > > > + IMX492_EXPOSURE_MIN, > > > + imx492->vblank + > > > + imx492->cur_mode->height - > > > + IMX492_EXPOSURE_OFFSET, > > > + 1, IMX492_EXPOSURE_DEFAULT); > > > > It looks like you forgot to write the corresponding registers. > > Yeah, will look into this one as well. > > > > + break; > > > + case V4L2_CID_EXPOSURE: > > > + /* Set controls only if sensor is in power on state */ > > > + if (!pm_runtime_get_if_in_use(imx492->dev)) > > > + return 0; > > > + exposure = ctrl->val; > > > + analog_gain = imx492->again_ctrl->val; > > > + ret = imx492_update_exp_gain(imx492, exposure, analog_gain); > > > + pm_runtime_put(imx492->dev); > > > + break; > > > + case V4L2_CID_TEST_PATTERN: > > > + if (ctrl->val) { > > > + imx492_write_reg(imx492, IMX492_REG_TESTPATSEL, 1, ctrl->val - 1); > > > + imx492_write_reg(imx492, IMX492_REG_TESTPTRN, 1, IMX492_BITS_TPTRN_ON); > > > + } else { > > > + imx492_write_reg(imx492, IMX492_REG_TESTPTRN, 1, IMX492_BITS_TPTRN_OFF); > > > + } > > > > Don't you need the same pm_runtime_get_if_in_use() dance as for > > V4L2_CID_EXPOSURE ? > > Yup. > > > > + ret = 0; > > > + break; > > > > Missing V4L2_CID_ANALOGUE_GAIN. > > Not implemented at the moment. Then you should remove the control from imx492_init_controls(), but it would be great if you could instead implement it, given that imx492_update_exp_gain() seems to handle the analogue gain. Actually, what imx492_update_exp_gain() doesn't seem to handle is the exposure time. > > > + default: > > > + dev_err(imx492->dev, "Invalid control %d", ctrl->id); > > > > This shouldn't happen if you correctly handle all the controls you have > > instanciated in imx492_init_controls(). > > Well, need to verify if that's the case here. > > > > + ret = -EINVAL; > > > + } > > > + > > > + return ret; > > > +} > > > + > > > +/* V4l2 subdevice control ops*/ > > > +static const struct v4l2_ctrl_ops imx492_ctrl_ops = { > > > + .s_ctrl = imx492_set_ctrl, > > > +}; > > > + > > > +/** > > > + * imx492_enum_mbus_code() - Enumerate V4L2 sub-device mbus codes > > > + * @sd: pointer to imx492 V4L2 sub-device structure > > > + * @sd_state: V4L2 sub-device configuration > > > + * @code: V4L2 sub-device code enumeration need to be filled > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static int imx492_enum_mbus_code(struct v4l2_subdev *sd, > > > + struct v4l2_subdev_state *sd_state, > > > + struct v4l2_subdev_mbus_code_enum *code) > > > +{ > > > + if (code->index > ARRAY_SIZE(supported_modes)) > > > + return -EINVAL; > > > + > > > + code->code = supported_modes[code->index].code; > > > > All modes have the same media bus code, you shouldn't report duplicated > > values. > > This sensor support 10bit format so this is prep work when these get properly > implemented. That's fine, but you should then add an array of supported media bus codes, separate from the modes. .enum_mbus_code() is meant to enumerate the formats, and for each supported format, .enum_frame_size() then enumerates the sizes. > > > + > > > + return 0; > > > +} > > > + > > > +/** > > > + * imx492_enum_frame_size() - Enumerate V4L2 sub-device frame sizes > > > + * @sd: pointer to imx492 V4L2 sub-device structure > > > + * @sd_state: V4L2 sub-device configuration > > > + * @fsize: V4L2 sub-device size enumeration need to be filled > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static int imx492_enum_frame_size(struct v4l2_subdev *sd, > > > + struct v4l2_subdev_state *sd_state, > > > + struct v4l2_subdev_frame_size_enum *fsize) > > > +{ > > > + if (fsize->index > ARRAY_SIZE(supported_modes)) > > > + return -EINVAL; > > > + > > > + if (fsize->code != supported_modes[fsize->index].code) > > > + return -EINVAL; > > > + > > > + fsize->max_width = supported_modes[fsize->index].width; > > > + fsize->min_width = fsize->max_width; > > > + fsize->max_height = supported_modes[fsize->index].height; > > > + fsize->min_height = fsize->max_height; > > > + > > > + return 0; > > > +} > > > + > > > +/** > > > +n * imx492_fill_pad_format() - Fill subdevice pad format > > > + * from selected sensor mode > > > + * @imx492: pointer to imx492 device > > > + * @mode: pointer to imx492_mode sensor mode > > > + * @fmt: V4L2 sub-device format need to be filled > > > + */ > > > +static void imx492_fill_pad_format(struct imx492 *imx492, > > > + const struct imx492_mode *mode, > > > + struct v4l2_subdev_format *fmt) > > > +{ > > > + fmt->format.width = mode->width; > > > + fmt->format.height = mode->height; > > > + fmt->format.code = mode->code; > > > + fmt->format.field = V4L2_FIELD_NONE; > > > + fmt->format.colorspace = V4L2_COLORSPACE_RAW; > > > + fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; > > > + fmt->format.quantization = V4L2_QUANTIZATION_DEFAULT; > > > > You can use V4L2_QUANTIZATION_FULL_RANGE. > > OK. > > > > + fmt->format.xfer_func = V4L2_XFER_FUNC_NONE; > > > +} > > > + > > > +/** > > > + * imx492_get_pad_format() - Get subdevice pad format > > > + * @sd: pointer to imx492 V4L2 sub-device structure > > > + * @sd_state: V4L2 sub-device configuration > > > + * @fmt: V4L2 sub-device format need to be set > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static int imx492_get_pad_format(struct v4l2_subdev *sd, > > > + struct v4l2_subdev_state *sd_state, > > > + struct v4l2_subdev_format *fmt) > > > +{ > > > + struct imx492 *imx492 = to_imx492(sd); > > > + > > > + mutex_lock(&imx492->mutex); > > > + > > > + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > > > + struct v4l2_mbus_framefmt *framefmt; > > > + > > > + framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > > > + fmt->format = *framefmt; > > > + } else { > > > + imx492_fill_pad_format(imx492, imx492->cur_mode, fmt); > > > + } > > > + > > > + mutex_unlock(&imx492->mutex); > > > + > > > + return 0; > > > +} > > > + > > > +/** > > > + * imx492_set_pad_format() - Set subdevice pad format > > > + * @sd: pointer to imx492 V4L2 sub-device structure > > > + * @sd_state: V4L2 sub-device configuration > > > + * @fmt: V4L2 sub-device format need to be set > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static int imx492_set_pad_format(struct v4l2_subdev *sd, > > > + struct v4l2_subdev_state *sd_state, > > > + struct v4l2_subdev_format *fmt) > > > +{ > > > + struct imx492 *imx492 = to_imx492(sd); > > > + const struct imx492_mode *mode; > > > + int ret = 0; > > > + > > > + mutex_lock(&imx492->mutex); > > > + > > > + fmt->format.code = imx492_get_format_code(imx492, 0); > > > + mode = v4l2_find_nearest_size(supported_modes, > > > + ARRAY_SIZE(supported_modes), > > > + width, height, > > > + fmt->format.width, fmt->format.height); > > > + imx492_fill_pad_format(imx492, mode, fmt); > > > + > > > + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > > > + struct v4l2_mbus_framefmt *framefmt; > > > + > > > + framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > > > + *framefmt = fmt->format; > > > + } else { > > > + ret = imx492_update_controls(imx492, mode); > > > + if (!ret) > > > + imx492->cur_mode = mode; > > > + } > > > + > > > + mutex_unlock(&imx492->mutex); > > > + > > > + return ret; > > > +} > > > + > > > +/** > > > + * imx492_init_pad_cfg() - Initialize sub-device pad configuration > > > + * @sd: pointer to imx492 V4L2 sub-device structure > > > + * @sd_state: V4L2 sub-device configuration > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static int imx492_init_pad_cfg(struct v4l2_subdev *sd, > > > + struct v4l2_subdev_state *sd_state) > > > +{ > > > + struct imx492 *imx492 = to_imx492(sd); > > > + struct v4l2_subdev_format fmt = { 0 }; > > > + > > > + fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; > > > > When using the active state API you will never get a null state here, so you > > can set this to > > > > struct v4l2_subdev_format fmt = { .which = V4L2_SUBDEV_FORMAT_TRY, }; > > > > unconditionally. > > OK. > > > > + imx492_fill_pad_format(imx492, &supported_modes[0], &fmt); > > > + > > > + return imx492_set_pad_format(sd, sd_state, &fmt); > > > +} > > > + > > > +/** > > > + * imx492_start_streaming() - Start sensor stream > > > + * @imx492: pointer to imx492 device > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static int imx492_start_streaming(struct imx492 *imx492) > > > +{ > > > + const struct imx492_reg_list *reg_list; > > > + int ret; > > > + > > > + /* Write sensor mode registers */ > > > + reg_list = &imx492->cur_mode->reg_list; > > > + ret = imx492_write_regs(imx492, reg_list->regs, > > > + reg_list->num_of_regs); > > > + if (ret) { > > > + dev_err(imx492->dev, "fail to write initial registers"); > > > + return ret; > > > + } > > > + > > > + /* Setup handler will write actual exposure and gain */ > > > + ret = __v4l2_ctrl_handler_setup(imx492->sd.ctrl_handler); > > > + if (ret) { > > > + dev_err(imx492->dev, "fail to setup handler"); > > > + return ret; > > > + } > > > + > > > + /* 1st stabilization period */ > > > + usleep_range(10000, 11000); > > > + imx492_write_reg(imx492, IMX492_REG_MODE_SELECT, 1, 0x02); > > > + imx492_write_reg(imx492, IMX492_REG_SYSCLKEN, 1, 0x92); > > > + imx492_write_reg(imx492, IMX492_REG_SYSCLKEN, 1, 0x9a); > > > + imx492_write_reg(imx492, IMX492_REG_MODE_SELECT, 1, IMX492_MODE_STREAMING); > > > + > > > + /* 2nd stabilization period */ > > > + usleep_range(7000, 8000); > > > + > > > + /* Start streaming */ > > > + ret = imx492_write_reg(imx492, IMX492_REG_XMSTA, 1, 0x20); > > > + > > > + if (ret) { > > > + dev_err(imx492->dev, "fail to start streaming"); > > > + return ret; > > > + } > > > + > > > + return 0; > > > +} > > > + > > > +/** > > > + * imx492_stop_streaming() - Stop sensor stream > > > + * @imx492: pointer to imx492 device > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static void imx492_stop_streaming(struct imx492 *imx492) > > > +{ > > > + imx492_write_reg(imx492, IMX492_REG_MODE_SELECT, 1, IMX492_MODE_STANDBY); > > > + imx492_write_reg(imx492, IMX492_REG_XMSTA, 1, 0x10); > > > +} > > > + > > > +/** > > > + * imx492_set_stream() - Enable sensor streaming > > > + * @sd: pointer to imx492 subdevice > > > + * @enable: set to enable sensor streaming > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static int imx492_set_stream(struct v4l2_subdev *sd, int enable) > > > +{ > > > + struct imx492 *imx492 = to_imx492(sd); > > > + int ret; > > > + > > > + mutex_lock(&imx492->mutex); > > > + > > > + if (imx492->streaming == enable) { > > > > This should never happen. You can drop imx492->streaming. > > Well, OK. > > > > + mutex_unlock(&imx492->mutex); > > > + return 0; > > > + } > > > + > > > + if (enable) { > > > + ret = pm_runtime_resume_and_get(imx492->dev); > > > + if (ret) > > > + goto error_unlock; > > > + ret = imx492_start_streaming(imx492); > > > + if (ret) > > > + goto error_power_off; > > > + } else { > > > + imx492_stop_streaming(imx492); > > > + pm_runtime_put(imx492->dev); > > > + } > > > + > > > + imx492->streaming = enable; > > > + > > > + mutex_unlock(&imx492->mutex); > > > + > > > + return 0; > > > + > > > +error_power_off: > > > + pm_runtime_put(imx492->dev); > > > +error_unlock: > > > + mutex_unlock(&imx492->mutex); > > > + > > > + return ret; > > > +} > > > + > > > +/** > > > + * imx492_detect() - Detect imx492 sensor > > > + * @imx492: pointer to imx492 device > > > + * > > > + * Return: 0 if successful, -EIO if sensor id does not match > > > + */ > > > +static int imx492_detect(struct imx492 *imx492) > > > +{ > > > + int ret; > > > + u32 val; > > > + > > > + ret = imx492_read_reg(imx492, IMX492_REG_STANDBY, 1, &val); > > > > Is the chip ID really stored in that register ? > > No. There simply isn't an ID register. In order to see if the sensor is > properly powered up and reset i had to chose a register with a known, non-zero > value. You may want to read the whole register space to check if there's an ID register somewhere that may contain 0x0492 (or maybe in decimar). There usually is one. > > > + if (ret) > > > + return ret; > > > + > > > + if (val != IMX492_ID) { > > > + dev_err(imx492->dev, "chip id mismatch: %x!=%x", IMX492_ID, val); > > > + return -ENXIO; > > > + } > > > + > > > + return 0; > > > +} > > > + > > > +/** > > > + * imx492_parse_hw_config() - Parse HW configuration and check if supported > > > + * @imx492: pointer to imx492 device > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static int imx492_parse_hw_config(struct imx492 *imx492) > > > +{ > > > + struct fwnode_handle *fwnode = dev_fwnode(imx492->dev); > > > + struct v4l2_fwnode_endpoint bus_cfg = { > > > + .bus_type = V4L2_MBUS_CSI2_DPHY > > > + }; > > > + struct fwnode_handle *ep; > > > + unsigned int i; > > > + int ret; > > > + > > > + if (!fwnode) > > > + return -ENXIO; > > > + > > > + imx492->power_gpio = devm_gpiod_get(imx492->dev, "power", GPIOD_OUT_HIGH); > > > > Not listed in the DT binding. > > > > > + if (IS_ERR(imx492->power_gpio)) { > > > + dev_err(imx492->dev, "failed to get power gpio %ld", > > > + PTR_ERR(imx492->power_gpio)); > > > + return PTR_ERR(imx492->power_gpio); > > > + } > > > + > > > + imx492->oscen_gpio = devm_gpiod_get(imx492->dev, "oscen", GPIOD_OUT_HIGH); > > > > Not listed in the DT binding. > > Both of the above are specific to this particular sensor board. Other > implementations may well not have any of these. What are those two GPIOs connected to ? > > You should also handle regulators in the driver. > > Err... > > > > + if (IS_ERR(imx492->oscen_gpio)) { > > > + dev_err(imx492->dev, "failed to get oscen gpio %ld", > > > + PTR_ERR(imx492->oscen_gpio)); > > > + return PTR_ERR(imx492->oscen_gpio); > > > + } > > > + > > > + imx492->reset_gpio = devm_gpiod_get(imx492->dev, "reset", GPIOD_OUT_HIGH); > > > + if (IS_ERR(imx492->reset_gpio)) { > > > + dev_err(imx492->dev, "failed to get reset gpio %ld", > > > + PTR_ERR(imx492->reset_gpio)); > > > + return PTR_ERR(imx492->reset_gpio); > > > + } > > > + > > > + if (gpiod_direction_output(imx492->power_gpio, 1) || > > > + gpiod_direction_output(imx492->oscen_gpio, 1) || > > > + gpiod_direction_output(imx492->reset_gpio, 0)) { > > > > This is done by devm_gpiod_get(). > > OK. > > > > + dev_err(imx492->dev, "failed to change gpio direction"); > > > + return -EINVAL; > > > + } > > > + > > > + /* Get sensor input clock */ > > > + imx492->inclk = devm_clk_get(imx492->dev, NULL); > > > + if (IS_ERR(imx492->inclk)) { > > > + dev_err(imx492->dev, "could not get inclk"); > > > + return PTR_ERR(imx492->inclk); > > > + } > > > + > > > + ep = fwnode_graph_get_next_endpoint(fwnode, NULL); > > > + if (!ep) { > > > + dev_err(imx492->dev, "next endpoint?"); > > > + return -ENXIO; > > > + } > > > + > > > + ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); > > > + fwnode_handle_put(ep); > > > + if (ret) { > > > + dev_err(imx492->dev, "endpoint alloc parse"); > > > + return ret; > > > + } > > > + > > > + if (bus_cfg.bus.mipi_csi2.num_data_lanes != IMX492_NUM_DATA_LANES) { > > > + dev_err(imx492->dev, "number of CSI2 data lanes %d is not supported", > > > + bus_cfg.bus.mipi_csi2.num_data_lanes); > > > + ret = -EINVAL; > > > + goto done_endpoint_free; > > > + } > > > + > > > + if (!bus_cfg.nr_of_link_frequencies) { > > > + dev_err(imx492->dev, "no link frequencies defined"); > > > + ret = -EINVAL; > > > + goto done_endpoint_free; > > > + } > > > + > > > + for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) { > > > + if (bus_cfg.link_frequencies[i] == IMX492_LINK_FREQ) > > > + goto done_endpoint_free; > > > + } > > > + > > > + ret = -EINVAL; > > > + > > > +done_endpoint_free: > > > + v4l2_fwnode_endpoint_free(&bus_cfg); > > > + > > > + return ret; > > > +} > > > + > > > +/* V4l2 subdevice ops */ > > > +static const struct v4l2_subdev_video_ops imx492_video_ops = { > > > + .s_stream = imx492_set_stream, > > > +}; > > > + > > > +static const struct v4l2_subdev_pad_ops imx492_pad_ops = { > > > + .init_cfg = imx492_init_pad_cfg, > > > + .enum_mbus_code = imx492_enum_mbus_code, > > > + .enum_frame_size = imx492_enum_frame_size, > > > + .get_fmt = imx492_get_pad_format, > > > > Please use the subdev active state API. You need to call > > v4l2_subdev_init_finalize() at probe time, and you can set this to > > > > .get_fmt = v4l2_subdev_get_fmt, > > OK. > > > Then, in imx492_set_pad_format() (and elsewhere as needed), you can use > > v4l2_subdev_get_pad_format() to replace v4l2_subdev_get_try_format(). This > > helps making code paths identical for the TRY and ACTIVE cases, the only > > exception being the update of controls in .set_fmt() in the ACTIVE case. > > > > > + .set_fmt = imx492_set_pad_format, > > > > Please also implement the .get_selection operation to report the > > V4L2_SEL_TGT_CROP, V4L2_SEL_TGT_CROP_BOUNDS, V4L2_SEL_TGT_CROP_DEFAULT and > > V4L2_SEL_TGT_NATIVE_SIZE values. > > Cropping is a big pain in the ass with this sensor and is currently not stable. > Could you please point me to an existing driver that's a good example? The imx219 driver is an example of a driver that exposes read-only selection rectangles. It's not perfect, as it doesn't use the active state API, but you should get the idea. > > > +}; > > > + > > > +static const struct v4l2_subdev_ops imx492_subdev_ops = { > > > + .video = &imx492_video_ops, > > > + .pad = &imx492_pad_ops, > > > +}; > > > + > > > +/** > > > + * imx492_power_on() - Sensor power on sequence > > > + * @dev: pointer to i2c device > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static int imx492_power_on(struct device *dev) > > > +{ > > > + struct v4l2_subdev *sd = dev_get_drvdata(dev); > > > + struct imx492 *imx492 = to_imx492(sd); > > > + > > > + gpiod_set_value_cansleep(imx492->power_gpio, 1); > > > + msleep(1); > > > + gpiod_set_value_cansleep(imx492->reset_gpio, 1); > > > + msleep(1); > > > + gpiod_set_value_cansleep(imx492->oscen_gpio, 1); > > > + msleep(1); > > > > How about regulators and clock ? > > In this particular case i don't have to alter any of them. Do i need to prepare > some code for the general case? As they're defined in the DT bindings they should be supported, yes. Given the oscen and power GPIOs used in this driver, I have a feeling you should add a GPIO-controlled fixed regulator in DT to replace the power GPIO, and a GPIO-controlled fixed-frequency clock to replace the oscen GPIO. > > > + > > > + return 0; > > > +} > > > + > > > +/** > > > + * imx492_power_off() - Sensor power off sequence > > > + * @dev: pointer to i2c device > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static int imx492_power_off(struct device *dev) > > > +{ > > > + struct v4l2_subdev *sd = dev_get_drvdata(dev); > > > + struct imx492 *imx492 = to_imx492(sd); > > > + > > > + gpiod_set_value_cansleep(imx492->oscen_gpio, 0); > > > + gpiod_set_value_cansleep(imx492->reset_gpio, 0); > > > + gpiod_set_value_cansleep(imx492->power_gpio, 0); > > > + > > > + return 0; > > > +} > > > + > > > +/** > > > + * imx492_init_controls() - Initialize sensor subdevice controls > > > + * @imx492: pointer to imx492 device > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static int imx492_init_controls(struct imx492 *imx492) > > > +{ > > > + struct v4l2_ctrl_handler *ctrl_hdlr = &imx492->ctrl_handler; > > > + const struct imx492_mode *mode = imx492->cur_mode; > > > + u32 lpfr; > > > + int ret; > > > + > > > + ret = v4l2_ctrl_handler_init(ctrl_hdlr, 6); > > > + if (ret) > > > + return ret; > > > + > > > + /* Serialize controls with sensor device */ > > > + ctrl_hdlr->lock = &imx492->mutex; > > > + /* Initialize exposure and gain */ > > > + lpfr = mode->vblank + mode->height; > > > + imx492->exp_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, > > > + &imx492_ctrl_ops, > > > + V4L2_CID_EXPOSURE, > > > + IMX492_EXPOSURE_MIN, > > > + lpfr - IMX492_EXPOSURE_OFFSET, > > > + IMX492_EXPOSURE_STEP, > > > + IMX492_EXPOSURE_DEFAULT); > > > + > > > + imx492->again_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, > > > + &imx492_ctrl_ops, > > > + V4L2_CID_ANALOGUE_GAIN, > > > + IMX492_AGAIN_MIN, > > > + IMX492_AGAIN_MAX, > > > + IMX492_AGAIN_STEP, > > > + IMX492_AGAIN_DEFAULT); > > > + > > > + v4l2_ctrl_cluster(2, &imx492->exp_ctrl); > > > + > > > + imx492->vblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, > > > + &imx492_ctrl_ops, > > > + V4L2_CID_VBLANK, > > > + mode->vblank_min, > > > + mode->vblank_max, > > > + 1, mode->vblank); > > > + /* Read only controls */ > > > + imx492->hblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, > > > + &imx492_ctrl_ops, > > > + V4L2_CID_HBLANK, > > > + mode->hblank_min, > > > + mode->hblank_max, > > > + 1, mode->hblank); > > > + if (imx492->hblank_ctrl) > > > + imx492->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; > > > + > > > + imx492->pclk_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, > > > + &imx492_ctrl_ops, > > > + V4L2_CID_PIXEL_RATE, > > > + mode->pclk, mode->pclk, > > > + 1, mode->pclk); > > > > Shouldn't this be read-only ? > > Yup. > > > > + > > > + imx492->link_freq_ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr, > > > + &imx492_ctrl_ops, > > > + V4L2_CID_LINK_FREQ, > > > + ARRAY_SIZE(link_freq) - > > > + 1, > > > + mode->link_freq_idx, > > > + link_freq); > > > + if (imx492->link_freq_ctrl) > > > + imx492->link_freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; > > > + > > > + v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx492_ctrl_ops, > > > + V4L2_CID_TEST_PATTERN, > > > + ARRAY_SIZE(imx492_test_pattern_menu) - 1, > > > + 0, 0, imx492_test_pattern_menu); > > > + > > > + if (ctrl_hdlr->error) { > > > + dev_err(imx492->dev, "control init failed: %d", ctrl_hdlr->error); > > > + v4l2_ctrl_handler_free(ctrl_hdlr); > > > + return ctrl_hdlr->error; > > > + } > > > + > > > + imx492->sd.ctrl_handler = ctrl_hdlr; > > > + > > > + return 0; > > > +} > > > + > > > +/** > > > + * imx492_probe() - I2C client device binding > > > + * @client: pointer to i2c client device > > > + * > > > + * Return: 0 if successful, error code otherwise. > > > + */ > > > +static int imx492_probe(struct i2c_client *client) > > > +{ > > > + struct imx492 *imx492; > > > + int ret; > > > + > > > + imx492 = devm_kzalloc(&client->dev, sizeof(*imx492), GFP_KERNEL); > > > + if (!imx492) > > > + return -ENOMEM; > > > + > > > + imx492->dev = &client->dev; > > > + > > > + /* Initialize subdev */ > > > + v4l2_i2c_subdev_init(&imx492->sd, client, &imx492_subdev_ops); > > > + > > > + ret = imx492_parse_hw_config(imx492); > > > + if (ret) { > > > + dev_err(imx492->dev, "HW configuration is not supported"); > > > + return ret; > > > + } > > > + > > > + mutex_init(&imx492->mutex); > > > + > > > + ret = imx492_power_on(imx492->dev); > > > + if (ret) { > > > + dev_err(imx492->dev, "failed to power-on the sensor"); > > > + goto error_mutex_destroy; > > > + } > > > + > > > + /* Check module identity */ > > > + ret = imx492_detect(imx492); > > > + if (ret) { > > > + dev_err(imx492->dev, "failed to find sensor: %d", ret); > > > + goto error_power_off; > > > + } > > > + > > > + /* Set default mode to max resolution */ > > > + imx492->cur_mode = &supported_modes[0]; > > > + imx492->vblank = imx492->cur_mode->vblank; > > > + > > > + ret = imx492_init_controls(imx492); > > > + if (ret) { > > > + dev_err(imx492->dev, "failed to init controls: %d", ret); > > > + goto error_power_off; > > > + } > > > + > > > + /* Initialize subdev */ > > > + imx492->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > > > + imx492->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; > > > + > > > + imx492->scap.capability = V4L2_MODE_HIGHQUALITY | V4L2_CAP_TIMEPERFRAME; > > > + imx492->scap.capturemode = 0; > > > + imx492->scap.timeperframe.denominator = DEFAULT_FPS; > > > + imx492->scap.timeperframe.numerator = 1; > > > + > > > + /* Initialize source pad */ > > > + imx492->pad.flags = MEDIA_PAD_FL_SOURCE; > > > + ret = media_entity_pads_init(&imx492->sd.entity, 1, &imx492->pad); > > > + if (ret) { > > > + dev_err(imx492->dev, "failed to init entity pads: %d", ret); > > > + goto error_handler_free; > > > + } > > > + > > > + ret = v4l2_async_register_subdev(&imx492->sd); > > > + if (ret < 0) { > > > + dev_err(imx492->dev, "failed to register async subdev: %d", ret); > > > + goto error_media_entity; > > > + } > > > > This should be done at the very end of probe(), as the sensor can be used > > right after it gets registered, so it should be fully operational. > > > > > + > > > + pm_runtime_set_active(imx492->dev); > > > + pm_runtime_enable(imx492->dev); > > > + pm_runtime_idle(imx492->dev); > > > > While at it, I would also implement autosuspend. You should then add a call to > > pm_runtime_get_noresume() before pm_runtime_enable(), drop the > > pm_runtime_idle() call, and add > > From what i can see most, even 2022, drivers come with the above sequence. > Which one does it right? I apologize for the runtime PM mess in camera sensor drivers :-( The best option is pm_runtime_set_active(imx492->dev); pm_runtime_get_noresume(imx492->dev); pm_runtime_enable(imx492->dev); pm_runtime_set_autosuspend_delay(imx492->dev, 1000); pm_runtime_use_autosuspend(imx492->dev); pm_runtime_put_autosuspend(imx492->dev); > > pm_runtime_set_autosuspend_delay(imx492->dev, 1000); > > pm_runtime_use_autosuspend(imx492->dev); > > pm_runtime_put_autosuspend(imx492->dev); > > > > You will also need to replace pm_runtime_put() with > > pm_runtime_mark_last_busy() + pm_runtime_put_autosuspend() above. > > > > > + > > > + return 0; > > > + > > > +error_media_entity: > > > + media_entity_cleanup(&imx492->sd.entity); > > > +error_handler_free: > > > + v4l2_ctrl_handler_free(imx492->sd.ctrl_handler); > > > +error_power_off: > > > + imx492_power_off(imx492->dev); > > > +error_mutex_destroy: > > > + mutex_destroy(&imx492->mutex); > > > + > > > + return ret; > > > +} > > > + > > > +/** > > > + * imx492_remove() - I2C client device unbinding > > > + * @client: pointer to I2C client device > > > + */ > > > +static void imx492_remove(struct i2c_client *client) > > > +{ > > > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > > > + struct imx492 *imx492 = to_imx492(sd); > > > + > > > + v4l2_async_unregister_subdev(sd); > > > + media_entity_cleanup(&sd->entity); > > > + v4l2_ctrl_handler_free(sd->ctrl_handler); > > > + pm_runtime_disable(&client->dev); > > > + if (!pm_runtime_status_suspended(&client->dev)) > > > + imx492_power_off(&client->dev); > > > + pm_runtime_set_suspended(&client->dev); > > > + mutex_destroy(&imx492->mutex); > > > +} > > > + > > > +static const struct dev_pm_ops imx492_pm_ops = { > > > + SET_RUNTIME_PM_OPS(imx492_power_off, imx492_power_on, NULL) > > > +}; > > > + > > > +static const struct of_device_id imx492_of_match[] = { > > > + { .compatible = "sony,imx492_mipi" }, > > > + { } > > > +}; > > > + > > > +MODULE_DEVICE_TABLE(of, imx492_of_match); > > > + > > > +static struct i2c_driver imx492_driver = { > > > + .probe_new = imx492_probe, > > > + .remove = imx492_remove, > > > + .driver = { > > > + .name = "imx492", > > > + .pm = &imx492_pm_ops, > > > + .of_match_table = imx492_of_match, > > > + }, > > > +}; > > > + > > > +module_i2c_driver(imx492_driver); > > > + > > > +MODULE_DESCRIPTION("Sony imx492 sensor driver"); > > > +MODULE_AUTHOR("Petko Manolov "); > > > +MODULE_LICENSE("GPL"); -- Regards, Laurent Pinchart