On Thu, Dec 15, 2022 at 04:51:40PM +0100, jerome Neanne wrote:
> On 15/12/2022 16:09, Wadim Egorov wrote:

> > I am testing your PMIC patches on a AM62 based board with a similar setup and
> > running into the following error

> >      VDDSHV5_SDIO: bypassed regulator has no supply!
> >      VDDSHV5_SDIO: will resolve supply early: ldo1
> >      VDDSHV5_SDIO: supplied by regulator-dummy
> >      VDDSHV5_SDIO: failed to get the current voltage: -EINVAL

> > Have you noticed problems with LDO1 and bypass mode?

> I did not noticed this on am642 board but IIRC this rail was not used. I
> heard about similar issue reported to me by Nishanth M with a fix proposal
> here:
> https://gist.github.com/nmenon/e4dd6ef6afe31bc9750fa6cbee8d3e25

That proposal looks really non-idiomatic and quite unusual, if there's a
fixed voltage supply to the LDO I'd expect to see it modeled as a fixed
voltage regulator.  I'm not sure what the use of bypass here is trying
to accomplish TBH.