From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id AC4AEC636D4 for ; Fri, 3 Feb 2023 13:48:28 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231663AbjBCNs1 (ORCPT ); Fri, 3 Feb 2023 08:48:27 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58408 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231160AbjBCNs1 (ORCPT ); Fri, 3 Feb 2023 08:48:27 -0500 Received: from ams.source.kernel.org (ams.source.kernel.org [145.40.68.75]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 34F91627AC; Fri, 3 Feb 2023 05:48:25 -0800 (PST) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id D78C9B82AC7; Fri, 3 Feb 2023 13:48:23 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id B1021C433EF; Fri, 3 Feb 2023 13:48:21 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1675432102; bh=AthrHj60gTkMkz8JH5d8IqfpTpCg6HL4KzXq3hjKTK4=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=c5V2mQpjpooFwsdp8sXlF1CXjQ82XstwNpa4fWV3ZAiD6/BXOgj419pZusi+zbEtC IhctBqK6dAknHlmtb5xwkJhf8dcy7XBkyULCud5J8O08NQG3e0lQBEyRcSUqLanKQV fIadNgw1c2dLo1DsD4CjdBqwxQXgo0QEfw/wF4zEWzk7Df0gUEecOStvqhYc+J3k+r WVZjwkU7+5/o2z71w+9uH9nLauZRPhnHJaBikHAOSZG2i2XAgYNXR29Q5NkUoZfEO+ qGTHIifzmu2mR5+wy3Ckqs0ZOQYil/+PEzQbVmfIohDu/+3n/KmiXj3FqLumiudRzm KqF6oTzByB9vg== Date: Fri, 3 Feb 2023 19:18:18 +0530 From: Vinod Koul To: Abel Vesa Cc: Andy Gross , Bjorn Andersson , Konrad Dybcio , Lee Jones , Rob Herring , Krzysztof Kozlowski , Kishon Vijay Abraham I , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, Linux Kernel Mailing List , linux-phy@lists.infradead.org Subject: Re: [RFC v3 4/7] phy: qcom: Add QCOM SNPS eUSB2 repeater driver Message-ID: References: <20230202133816.4026990-1-abel.vesa@linaro.org> <20230202133816.4026990-5-abel.vesa@linaro.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20230202133816.4026990-5-abel.vesa@linaro.org> Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org On 02-02-23, 15:38, Abel Vesa wrote: > PM8550B contains a eUSB2 repeater used for making the eUSB2 from > SM8550 USB 2.0 compliant. This can be modelled SW-wise as a Phy. > So add a new phy driver for it. > > Signed-off-by: Abel Vesa > --- > drivers/phy/qualcomm/Kconfig | 9 + > drivers/phy/qualcomm/Makefile | 1 + > .../phy/qualcomm/phy-qcom-eusb2-repeater.c | 278 ++++++++++++++++++ > 3 files changed, 288 insertions(+) > create mode 100644 drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c > > diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig > index 27b5a2a3637d..a70631b04522 100644 > --- a/drivers/phy/qualcomm/Kconfig > +++ b/drivers/phy/qualcomm/Kconfig > @@ -79,6 +79,15 @@ config PHY_QCOM_SNPS_EUSB2 > chipsets. The PHY is paired with a Synopsys DWC3 USB controller > on Qualcomm SOCs. > > +config PHY_QCOM_EUSB2_REPEATER > + tristate "Qualcomm SNPS eUSB2 Repeater Driver" > + depends on OF && (ARCH_QCOM || COMPILE_TEST) > + select GENERIC_PHY > + help > + Enable support for the USB high-speed SNPS eUSB2 repeater on Qualcomm > + PMICs. The repeater is paired with a Synopsys eUSB2 Phy > + on Qualcomm SOCs. > + > config PHY_QCOM_USB_HS > tristate "Qualcomm USB HS PHY module" > depends on USB_ULPI_BUS > diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile > index 3ee118f4dfc7..7dcba9537b69 100644 > --- a/drivers/phy/qualcomm/Makefile > +++ b/drivers/phy/qualcomm/Makefile > @@ -14,6 +14,7 @@ obj-$(CONFIG_PHY_QCOM_QMP) += \ > > obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o > obj-$(CONFIG_PHY_QCOM_SNPS_EUSB2) += phy-qcom-snps-eusb2.o > +obj-$(CONFIG_PHY_QCOM_EUSB2_REPEATER) += phy-qcom-eusb2-repeater.o > obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o > obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o > obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o > diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c > new file mode 100644 > index 000000000000..f7f822f2973f > --- /dev/null > +++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c > @@ -0,0 +1,278 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2023, Linaro Limited > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +/* eUSB2 status registers */ > +#define EUSB2_RPTR_STATUS 0x08 > +#define RPTR_OK BIT(7) > + > +/* eUSB2 control registers */ > +#define EUSB2_EN_CTL1 0x46 > +#define EUSB2_RPTR_EN BIT(7) > + > +#define PHY_HOST_MODE BIT(0) > +#define EUSB2_FORCE_EN_5 0xE8 > +#define F_CLK_19P2M_EN BIT(6) > +#define F_CLK_19P2M_EN_SHIFT 6 Why use shifts, use FIELD_{PREP|GET} instead > + > +#define EUSB2_FORCE_VAL_5 0xED > +#define V_CLK_19P2M_EN BIT(6) > +#define V_CLK_19P2M_EN_SHIFT 6 > + > +#define EUSB2_TUNE_IUSB2 0x51 > +#define EUSB2_TUNE_SQUELCH_U 0x54 > +#define EUSB2_TUNE_USB2_PREEM 0x57 > + > +#define QCOM_EUSB2_REPEATER_INIT_CFG(o, v) \ > + { \ > + .offset = o, \ > + .val = v, \ > + } > + > +enum repeater_mode { > + REPEATER_HOST_MODE, > + REPEATER_PERIPH_MODE, > +}; > + > +struct eusb2_repeater_init_tbl { > + unsigned int offset; > + unsigned int val; > +}; > + > +struct eusb2_repeater_cfg { > + const struct eusb2_repeater_init_tbl *init_tbl; > + int init_tbl_num; > + /* regulators to be requested */ this comments is not very useful! either drop or add a meaningful comment > + const char * const *vreg_list; > + int num_vregs; > +}; > + > +struct eusb2_repeater { > + struct device *dev; > + struct regmap *regmap; > + struct phy *phy; > + struct regulator_bulk_data *vregs; > + const struct eusb2_repeater_cfg *cfg; > + u16 base; > + enum phy_mode mode; > +}; > + > +static const char * const pm8550b_vreg_l[] = { > + "vdd18", "vdd3", > +}; > + > +static const struct eusb2_repeater_init_tbl pm8550b_init_tbl[] = { > + QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_IUSB2, 0x8), > + QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_SQUELCH_U, 0x3), > + QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_USB2_PREEM, 0x5), > +}; > + > +static const struct eusb2_repeater_cfg pm8550b_eusb2_cfg = { > + .init_tbl = pm8550b_init_tbl, > + .init_tbl_num = ARRAY_SIZE(pm8550b_init_tbl), > + .vreg_list = pm8550b_vreg_l, > + .num_vregs = ARRAY_SIZE(pm8550b_vreg_l), > +}; > + > +static int eusb2_repeater_init_vregs(struct eusb2_repeater *rptr) > +{ > + int num = rptr->cfg->num_vregs; > + struct device *dev = rptr->dev; > + int i; > + > + rptr->vregs = devm_kcalloc(dev, num, sizeof(*rptr->vregs), GFP_KERNEL); > + if (!rptr->vregs) > + return -ENOMEM; > + > + for (i = 0; i < num; i++) > + rptr->vregs[i].supply = rptr->cfg->vreg_list[i]; > + > + return devm_regulator_bulk_get(dev, num, rptr->vregs); > +} > + > +static int eusb2_repeater_init(struct phy *phy) > +{ > + struct eusb2_repeater *rptr = phy_get_drvdata(phy); > + const struct eusb2_repeater_init_tbl *init_tbl = rptr->cfg->init_tbl; > + int num = rptr->cfg->init_tbl_num; > + int ret = 0; superfluous init > + u32 val; > + int i; > + > + ret = regulator_bulk_enable(rptr->cfg->num_vregs, rptr->vregs); > + if (ret) > + return ret; > + > + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_EN_CTL1, > + EUSB2_RPTR_EN, EUSB2_RPTR_EN); > + > + for (i = 0; i < num; i++) > + regmap_update_bits(rptr->regmap, > + rptr->base + init_tbl[i].offset, > + init_tbl[i].val, init_tbl[i].val); > + > + ret = regmap_read_poll_timeout(rptr->regmap, > + rptr->base + EUSB2_RPTR_STATUS, val, > + val & RPTR_OK, 10, 5); > + if (ret) > + dev_err(rptr->dev, "initialization timed-out\n"); > + > + return ret; > +} > + > +static int eusb2_repeater_set_mode(struct phy *phy, > + enum phy_mode mode, int submode) > +{ > + struct eusb2_repeater *rptr = phy_get_drvdata(phy); > + > + switch (mode) { > + case PHY_MODE_USB_HOST: > + /* > + * CM.Lx is prohibited when repeater is already into Lx state as > + * per eUSB 1.2 Spec. Below implement software workaround until > + * PHY and controller is fixing seen observation. > + */ > + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_EN_5, > + F_CLK_19P2M_EN, F_CLK_19P2M_EN); pls align to preceding open brace (hint checkpatch --strict would warn you for this) > + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_VAL_5, > + V_CLK_19P2M_EN, V_CLK_19P2M_EN); > + break; > + case PHY_MODE_USB_DEVICE: > + /* > + * In device mode clear host mode related workaround as there > + * is no repeater reset available, and enable/disable of > + * repeater doesn't clear previous value due to shared > + * regulators (say host <-> device mode switch). > + */ > + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_EN_5, > + F_CLK_19P2M_EN, 0); > + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_VAL_5, > + V_CLK_19P2M_EN, 0); > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int eusb2_repeater_exit(struct phy *phy) > +{ > + struct eusb2_repeater *rptr = phy_get_drvdata(phy); > + > + return regulator_bulk_disable(rptr->cfg->num_vregs, rptr->vregs); > +} > + > + > +static const struct phy_ops eusb2_repeater_ops = { > + .init = eusb2_repeater_init, > + .exit = eusb2_repeater_exit, > + .set_mode = eusb2_repeater_set_mode, > + .owner = THIS_MODULE, > +}; > + > +static int eusb2_repeater_probe(struct platform_device *pdev) > +{ > + struct eusb2_repeater *rptr; > + struct device *dev = &pdev->dev; > + struct phy_provider *phy_provider; > + struct device_node *np; > + u32 res; > + int ret; > + > + np = of_node_get(dev->of_node); > + > + rptr = devm_kzalloc(dev, sizeof(*rptr), GFP_KERNEL); > + if (!rptr) > + goto err_node_put; > + > + rptr->dev = dev; > + dev_set_drvdata(dev, rptr); > + > + rptr->cfg = of_device_get_match_data(dev); > + if (!rptr->cfg) > + goto err_node_put; > + > + rptr->regmap = dev_get_regmap(dev->parent, NULL); > + if (!rptr->regmap) > + goto err_node_put; > + > + ret = of_property_read_u32(np, "reg", &res); > + if (ret < 0) > + goto err_node_put; > + > + rptr->base = res; > + > + ret = eusb2_repeater_init_vregs(rptr); > + if (ret < 0) { > + dev_err(dev, "unable to get supplies\n"); > + goto err_node_put; > + } > + > + rptr->phy = devm_phy_create(dev, np, &eusb2_repeater_ops); > + if (IS_ERR(rptr->phy)) { > + ret = PTR_ERR(rptr->phy); > + dev_err(dev, "failed to create PHY: %d\n", ret); > + goto err_node_put; > + } > + > + phy_set_drvdata(rptr->phy, rptr); > + > + of_node_put(np); > + > + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); > + if (IS_ERR(phy_provider)) > + return PTR_ERR(phy_provider); > + > + dev_info(dev, "Registered Qcom-eUSB2 repeater\n"); > + > + return 0; > + > +err_node_put: > + of_node_put(np); > + return ret; > +} > + > +static int eusb2_repeater_remove(struct platform_device *pdev) > +{ > + struct eusb2_repeater *rptr = platform_get_drvdata(pdev); > + > + if (!rptr) > + return 0; > + > + eusb2_repeater_exit(rptr->phy); > + return 0; > +} > + > + > +static const struct of_device_id eusb2_repeater_of_match_table[] = { > + { > + .compatible = "qcom,pm8550b-eusb2-repeater", > + .data = &pm8550b_eusb2_cfg, > + }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, eusb2_repeater_of_match_table); > + > +static struct platform_driver eusb2_repeater_driver = { > + .probe = eusb2_repeater_probe, > + .remove = eusb2_repeater_remove, > + .driver = { > + .name = "qcom-eusb2-repeater", > + .of_match_table = eusb2_repeater_of_match_table, > + }, > +}; > + > +module_platform_driver(eusb2_repeater_driver); > + > +MODULE_DESCRIPTION("Qualcomm PMIC eUSB2 Repeater driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.34.1 -- ~Vinod From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id C43C3C61DA4 for ; Fri, 3 Feb 2023 13:56:14 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:In-Reply-To:MIME-Version:References: Message-ID:Subject:Cc:To:From:Date:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=p9+csFDzeNCgW1/YAG9QJDrnGDN4rdGdFZ33HTbKPNU=; b=yK7SIv6iOJpm5L NBbSJoy2H5OH/yMg3tzYY/FVQ5A7WIk/QZirqwQ4ptBoPfl7D7mINH2jAUTLv4QniDU7Lhokk7vZC Dl70F8emyMnm0KyzeKo4tmae6zRjGHWVaRAvke6OG2yM+0Xj7PYVMEcQKSmULtT/r47CSq1QQCMD4 c6OWbSUagy9LuFoBThsdXuCJBA1OMkJYlMCuuE+K3nZlitdVSyvto8GI9OPdL++ECpFK1+A4oO0hZ eQMrVyHXzYA9peJWT5k5VApHjD33jkcn4jYth1k3qSIT9k6cq8VFQUpin9BIULH8KSCuWYN2Bg38p bivPytTzdPnsZcy3DBSQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1pNwY1-002BYn-K1; Fri, 03 Feb 2023 13:56:13 +0000 Received: from dfw.source.kernel.org ([2604:1380:4641:c500::1]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1pNwQS-0028sc-La for linux-phy@lists.infradead.org; Fri, 03 Feb 2023 13:48:27 +0000 Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by dfw.source.kernel.org (Postfix) with ESMTPS id 2BFF161F3D; Fri, 3 Feb 2023 13:48:23 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id B1021C433EF; Fri, 3 Feb 2023 13:48:21 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1675432102; bh=AthrHj60gTkMkz8JH5d8IqfpTpCg6HL4KzXq3hjKTK4=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=c5V2mQpjpooFwsdp8sXlF1CXjQ82XstwNpa4fWV3ZAiD6/BXOgj419pZusi+zbEtC IhctBqK6dAknHlmtb5xwkJhf8dcy7XBkyULCud5J8O08NQG3e0lQBEyRcSUqLanKQV fIadNgw1c2dLo1DsD4CjdBqwxQXgo0QEfw/wF4zEWzk7Df0gUEecOStvqhYc+J3k+r WVZjwkU7+5/o2z71w+9uH9nLauZRPhnHJaBikHAOSZG2i2XAgYNXR29Q5NkUoZfEO+ qGTHIifzmu2mR5+wy3Ckqs0ZOQYil/+PEzQbVmfIohDu/+3n/KmiXj3FqLumiudRzm KqF6oTzByB9vg== Date: Fri, 3 Feb 2023 19:18:18 +0530 From: Vinod Koul To: Abel Vesa Cc: Andy Gross , Bjorn Andersson , Konrad Dybcio , Lee Jones , Rob Herring , Krzysztof Kozlowski , Kishon Vijay Abraham I , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, Linux Kernel Mailing List , linux-phy@lists.infradead.org Subject: Re: [RFC v3 4/7] phy: qcom: Add QCOM SNPS eUSB2 repeater driver Message-ID: References: <20230202133816.4026990-1-abel.vesa@linaro.org> <20230202133816.4026990-5-abel.vesa@linaro.org> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20230202133816.4026990-5-abel.vesa@linaro.org> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230203_054824_887988_26247145 X-CRM114-Status: GOOD ( 35.63 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org On 02-02-23, 15:38, Abel Vesa wrote: > PM8550B contains a eUSB2 repeater used for making the eUSB2 from > SM8550 USB 2.0 compliant. This can be modelled SW-wise as a Phy. > So add a new phy driver for it. > > Signed-off-by: Abel Vesa > --- > drivers/phy/qualcomm/Kconfig | 9 + > drivers/phy/qualcomm/Makefile | 1 + > .../phy/qualcomm/phy-qcom-eusb2-repeater.c | 278 ++++++++++++++++++ > 3 files changed, 288 insertions(+) > create mode 100644 drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c > > diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig > index 27b5a2a3637d..a70631b04522 100644 > --- a/drivers/phy/qualcomm/Kconfig > +++ b/drivers/phy/qualcomm/Kconfig > @@ -79,6 +79,15 @@ config PHY_QCOM_SNPS_EUSB2 > chipsets. The PHY is paired with a Synopsys DWC3 USB controller > on Qualcomm SOCs. > > +config PHY_QCOM_EUSB2_REPEATER > + tristate "Qualcomm SNPS eUSB2 Repeater Driver" > + depends on OF && (ARCH_QCOM || COMPILE_TEST) > + select GENERIC_PHY > + help > + Enable support for the USB high-speed SNPS eUSB2 repeater on Qualcomm > + PMICs. The repeater is paired with a Synopsys eUSB2 Phy > + on Qualcomm SOCs. > + > config PHY_QCOM_USB_HS > tristate "Qualcomm USB HS PHY module" > depends on USB_ULPI_BUS > diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile > index 3ee118f4dfc7..7dcba9537b69 100644 > --- a/drivers/phy/qualcomm/Makefile > +++ b/drivers/phy/qualcomm/Makefile > @@ -14,6 +14,7 @@ obj-$(CONFIG_PHY_QCOM_QMP) += \ > > obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o > obj-$(CONFIG_PHY_QCOM_SNPS_EUSB2) += phy-qcom-snps-eusb2.o > +obj-$(CONFIG_PHY_QCOM_EUSB2_REPEATER) += phy-qcom-eusb2-repeater.o > obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o > obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o > obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o > diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c > new file mode 100644 > index 000000000000..f7f822f2973f > --- /dev/null > +++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c > @@ -0,0 +1,278 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2023, Linaro Limited > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +/* eUSB2 status registers */ > +#define EUSB2_RPTR_STATUS 0x08 > +#define RPTR_OK BIT(7) > + > +/* eUSB2 control registers */ > +#define EUSB2_EN_CTL1 0x46 > +#define EUSB2_RPTR_EN BIT(7) > + > +#define PHY_HOST_MODE BIT(0) > +#define EUSB2_FORCE_EN_5 0xE8 > +#define F_CLK_19P2M_EN BIT(6) > +#define F_CLK_19P2M_EN_SHIFT 6 Why use shifts, use FIELD_{PREP|GET} instead > + > +#define EUSB2_FORCE_VAL_5 0xED > +#define V_CLK_19P2M_EN BIT(6) > +#define V_CLK_19P2M_EN_SHIFT 6 > + > +#define EUSB2_TUNE_IUSB2 0x51 > +#define EUSB2_TUNE_SQUELCH_U 0x54 > +#define EUSB2_TUNE_USB2_PREEM 0x57 > + > +#define QCOM_EUSB2_REPEATER_INIT_CFG(o, v) \ > + { \ > + .offset = o, \ > + .val = v, \ > + } > + > +enum repeater_mode { > + REPEATER_HOST_MODE, > + REPEATER_PERIPH_MODE, > +}; > + > +struct eusb2_repeater_init_tbl { > + unsigned int offset; > + unsigned int val; > +}; > + > +struct eusb2_repeater_cfg { > + const struct eusb2_repeater_init_tbl *init_tbl; > + int init_tbl_num; > + /* regulators to be requested */ this comments is not very useful! either drop or add a meaningful comment > + const char * const *vreg_list; > + int num_vregs; > +}; > + > +struct eusb2_repeater { > + struct device *dev; > + struct regmap *regmap; > + struct phy *phy; > + struct regulator_bulk_data *vregs; > + const struct eusb2_repeater_cfg *cfg; > + u16 base; > + enum phy_mode mode; > +}; > + > +static const char * const pm8550b_vreg_l[] = { > + "vdd18", "vdd3", > +}; > + > +static const struct eusb2_repeater_init_tbl pm8550b_init_tbl[] = { > + QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_IUSB2, 0x8), > + QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_SQUELCH_U, 0x3), > + QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_USB2_PREEM, 0x5), > +}; > + > +static const struct eusb2_repeater_cfg pm8550b_eusb2_cfg = { > + .init_tbl = pm8550b_init_tbl, > + .init_tbl_num = ARRAY_SIZE(pm8550b_init_tbl), > + .vreg_list = pm8550b_vreg_l, > + .num_vregs = ARRAY_SIZE(pm8550b_vreg_l), > +}; > + > +static int eusb2_repeater_init_vregs(struct eusb2_repeater *rptr) > +{ > + int num = rptr->cfg->num_vregs; > + struct device *dev = rptr->dev; > + int i; > + > + rptr->vregs = devm_kcalloc(dev, num, sizeof(*rptr->vregs), GFP_KERNEL); > + if (!rptr->vregs) > + return -ENOMEM; > + > + for (i = 0; i < num; i++) > + rptr->vregs[i].supply = rptr->cfg->vreg_list[i]; > + > + return devm_regulator_bulk_get(dev, num, rptr->vregs); > +} > + > +static int eusb2_repeater_init(struct phy *phy) > +{ > + struct eusb2_repeater *rptr = phy_get_drvdata(phy); > + const struct eusb2_repeater_init_tbl *init_tbl = rptr->cfg->init_tbl; > + int num = rptr->cfg->init_tbl_num; > + int ret = 0; superfluous init > + u32 val; > + int i; > + > + ret = regulator_bulk_enable(rptr->cfg->num_vregs, rptr->vregs); > + if (ret) > + return ret; > + > + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_EN_CTL1, > + EUSB2_RPTR_EN, EUSB2_RPTR_EN); > + > + for (i = 0; i < num; i++) > + regmap_update_bits(rptr->regmap, > + rptr->base + init_tbl[i].offset, > + init_tbl[i].val, init_tbl[i].val); > + > + ret = regmap_read_poll_timeout(rptr->regmap, > + rptr->base + EUSB2_RPTR_STATUS, val, > + val & RPTR_OK, 10, 5); > + if (ret) > + dev_err(rptr->dev, "initialization timed-out\n"); > + > + return ret; > +} > + > +static int eusb2_repeater_set_mode(struct phy *phy, > + enum phy_mode mode, int submode) > +{ > + struct eusb2_repeater *rptr = phy_get_drvdata(phy); > + > + switch (mode) { > + case PHY_MODE_USB_HOST: > + /* > + * CM.Lx is prohibited when repeater is already into Lx state as > + * per eUSB 1.2 Spec. Below implement software workaround until > + * PHY and controller is fixing seen observation. > + */ > + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_EN_5, > + F_CLK_19P2M_EN, F_CLK_19P2M_EN); pls align to preceding open brace (hint checkpatch --strict would warn you for this) > + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_VAL_5, > + V_CLK_19P2M_EN, V_CLK_19P2M_EN); > + break; > + case PHY_MODE_USB_DEVICE: > + /* > + * In device mode clear host mode related workaround as there > + * is no repeater reset available, and enable/disable of > + * repeater doesn't clear previous value due to shared > + * regulators (say host <-> device mode switch). > + */ > + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_EN_5, > + F_CLK_19P2M_EN, 0); > + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_VAL_5, > + V_CLK_19P2M_EN, 0); > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int eusb2_repeater_exit(struct phy *phy) > +{ > + struct eusb2_repeater *rptr = phy_get_drvdata(phy); > + > + return regulator_bulk_disable(rptr->cfg->num_vregs, rptr->vregs); > +} > + > + > +static const struct phy_ops eusb2_repeater_ops = { > + .init = eusb2_repeater_init, > + .exit = eusb2_repeater_exit, > + .set_mode = eusb2_repeater_set_mode, > + .owner = THIS_MODULE, > +}; > + > +static int eusb2_repeater_probe(struct platform_device *pdev) > +{ > + struct eusb2_repeater *rptr; > + struct device *dev = &pdev->dev; > + struct phy_provider *phy_provider; > + struct device_node *np; > + u32 res; > + int ret; > + > + np = of_node_get(dev->of_node); > + > + rptr = devm_kzalloc(dev, sizeof(*rptr), GFP_KERNEL); > + if (!rptr) > + goto err_node_put; > + > + rptr->dev = dev; > + dev_set_drvdata(dev, rptr); > + > + rptr->cfg = of_device_get_match_data(dev); > + if (!rptr->cfg) > + goto err_node_put; > + > + rptr->regmap = dev_get_regmap(dev->parent, NULL); > + if (!rptr->regmap) > + goto err_node_put; > + > + ret = of_property_read_u32(np, "reg", &res); > + if (ret < 0) > + goto err_node_put; > + > + rptr->base = res; > + > + ret = eusb2_repeater_init_vregs(rptr); > + if (ret < 0) { > + dev_err(dev, "unable to get supplies\n"); > + goto err_node_put; > + } > + > + rptr->phy = devm_phy_create(dev, np, &eusb2_repeater_ops); > + if (IS_ERR(rptr->phy)) { > + ret = PTR_ERR(rptr->phy); > + dev_err(dev, "failed to create PHY: %d\n", ret); > + goto err_node_put; > + } > + > + phy_set_drvdata(rptr->phy, rptr); > + > + of_node_put(np); > + > + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); > + if (IS_ERR(phy_provider)) > + return PTR_ERR(phy_provider); > + > + dev_info(dev, "Registered Qcom-eUSB2 repeater\n"); > + > + return 0; > + > +err_node_put: > + of_node_put(np); > + return ret; > +} > + > +static int eusb2_repeater_remove(struct platform_device *pdev) > +{ > + struct eusb2_repeater *rptr = platform_get_drvdata(pdev); > + > + if (!rptr) > + return 0; > + > + eusb2_repeater_exit(rptr->phy); > + return 0; > +} > + > + > +static const struct of_device_id eusb2_repeater_of_match_table[] = { > + { > + .compatible = "qcom,pm8550b-eusb2-repeater", > + .data = &pm8550b_eusb2_cfg, > + }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, eusb2_repeater_of_match_table); > + > +static struct platform_driver eusb2_repeater_driver = { > + .probe = eusb2_repeater_probe, > + .remove = eusb2_repeater_remove, > + .driver = { > + .name = "qcom-eusb2-repeater", > + .of_match_table = eusb2_repeater_of_match_table, > + }, > +}; > + > +module_platform_driver(eusb2_repeater_driver); > + > +MODULE_DESCRIPTION("Qualcomm PMIC eUSB2 Repeater driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.34.1 -- ~Vinod -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy