On Jan 20 09:44, Minwoo Im wrote:
> On 21-01-19 19:18:16, Klaus Jensen wrote:
> > On Jan 20 02:01, Minwoo Im wrote:
> > > Hello,
> > > 
> > > This patch series is third one to support multi-controller and namespace
> > > sharing in multi-path.  This series introduced subsystem scheme to
> > > manage controller(s) and namespace(s) in the subsystem.
> > > 
> > > This series has new patches from the V2:  'detached' parameter has been
> > > added to the nvme-ns device.  This will decide whether to attach the
> > > namespace to controller(s) in the current subsystem or not.  If it's
> > > given with true, then it will be just allocated in the subsystem, but
> > > not attaching to any controllers in the subsystem.  Otherwise, it will
> > > automatically attach to all the controllers in the subsystem.  The other
> > > t hing is that the last patch implemented Identify Active Namespace ID
> > > List command handler apart from the Allocated Namespace ID List.
> > > 
> > > Run with:
> > >   -device nvme,serial=qux,id=nvme3
> > >   -device nvme-ns,id=ns3,drive=drv12,nsid=3,bus=nvme3
> > > 
> > >   -device nvme-subsys,id=subsys0
> > >   -device nvme,serial=foo,id=nvme0,subsys=subsys0
> > >   -device nvme,serial=bar,id=nvme1,subsys=subsys0
> > >   -device nvme,serial=baz,id=nvme2,subsys=subsys0
> > >   -device nvme-ns,id=ns1,drive=drv10,nsid=1,subsys=subsys0,detached=true
> > >   -device nvme-ns,id=ns2,drive=drv11,nsid=2,bus=nvme2
> > > 
> > > nvme-cli:
> > >   root@vm:~/work# nvme list -v                                                                                                      
> > >   NVM Express Subsystems                                                                                                 
> > >                                                                                                                                      
> > >   Subsystem        Subsystem-NQN                                                                                    Controllers
> > >   ---------------- ------------------------------------------------------------------------------------------------ ----------------
> > >   nvme-subsys0     nqn.2019-08.org.qemu:qux                                                                         nvme0
> > >   nvme-subsys1     nqn.2019-08.org.qemu:subsys0                                                                     nvme1, nvme2, nvme3
> > >                                                                                                                                    
> > >   NVM Express Controllers                                                                                           
> > >                                                                                                                   
> > >   Device   SN                   MN                                       FR       TxPort Address        Subsystem    Namespaces
> > >   -------- -------------------- ---------------------------------------- -------- ------ -------------- ------------ ----------------
> > >   nvme0    qux                  QEMU NVMe Ctrl                           1.0      pcie   0000:00:06.0   nvme-subsys0
> > 
> > Shouldn't nvme0n1 be listed under Namespaces for nvme0?
> 
> Oh, I missed that one from the output.  As Keith mentioned, I ran the
> list command again based on the latest nvme-cli.git:
> 
> Please refer the following result.  I think it's okay not to send the
> cover letter again :)
> 
> # nvme --version
> nvme version 1.13.48.g33c6
> 
> # nvme list -v
> NVM Express Subsystems
> 
> Subsystem        Subsystem-NQN                                                                                    Controllers
> ---------------- ------------------------------------------------------------------------------------------------ ----------------
> nvme-subsys0     nqn.2019-08.org.qemu:qux                                                                         nvme0
> nvme-subsys1     nqn.2019-08.org.qemu:subsys0                                                                     nvme1, nvme2, nvme3
> 
> NVM Express Controllers
> 
> Device   SN                   MN                                       FR       TxPort Address        Subsystem    Namespaces      
> -------- -------------------- ---------------------------------------- -------- ------ -------------- ------------ ----------------
> nvme0    qux                  QEMU NVMe Ctrl                           1.0      pcie   0000:00:06.0   nvme-subsys0 nvme0n1
> nvme1    foo                  QEMU NVMe Ctrl                           1.0      pcie   0000:00:07.0   nvme-subsys1 
> nvme2    bar                  QEMU NVMe Ctrl                           1.0      pcie   0000:00:08.0   nvme-subsys1 
> nvme3    baz                  QEMU NVMe Ctrl                           1.0      pcie   0000:00:09.0   nvme-subsys1 nvme1c3n1
> 
> NVM Express Namespaces
> 
> Device       NSID     Usage                      Format           Controllers     
> ------------ -------- -------------------------- ---------------- ----------------
> nvme0n1      3        268.44  MB / 268.44  MB    512   B +  0 B   nvme0
> nvme1n1      2        268.44  MB / 268.44  MB    512   B +  0 B   nvme3

That looks better, but hmm. Shouldnt the namespace be named `nvme1c3n1`
here has well? Is that also an issue with nvme-cli?