* [PATCH 0/3] pinctrl: qcom: TLMM driver for SC8180x
@ 2021-01-20 22:21 Bjorn Andersson
2021-01-20 22:21 ` [PATCH 1/3] dt-bindings: pinctrl: qcom: Define common TLMM binding Bjorn Andersson
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Bjorn Andersson @ 2021-01-20 22:21 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Linus Walleij, Rob Herring
Cc: linux-arm-msm, linux-gpio, devicetree, linux-kernel
These patches introduces a binding documenting the shared properties of all
TLMM blocks, then defines the binding for the SC8180x specifically, followed by
the actual driver.
Bjorn Andersson (3):
dt-bindings: pinctrl: qcom: Define common TLMM binding
dt-bindings: pinctrl: qcom: Add sc8180x binding
pinctrl: qcom: Add sc8180x TLMM driver
.../pinctrl/qcom,sc8180x-pinctrl.yaml | 153 ++
.../bindings/pinctrl/qcom,tlmm-common.yaml | 85 +
drivers/pinctrl/qcom/Kconfig | 9 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-sc8180x.c | 1624 +++++++++++++++++
5 files changed, 1872 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
create mode 100644 drivers/pinctrl/qcom/pinctrl-sc8180x.c
--
2.29.2
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/3] dt-bindings: pinctrl: qcom: Define common TLMM binding
2021-01-20 22:21 [PATCH 0/3] pinctrl: qcom: TLMM driver for SC8180x Bjorn Andersson
@ 2021-01-20 22:21 ` Bjorn Andersson
2021-01-21 13:20 ` Linus Walleij
2021-01-20 22:21 ` [PATCH 2/3] dt-bindings: pinctrl: qcom: Add sc8180x binding Bjorn Andersson
2021-01-20 22:21 ` [PATCH 3/3] pinctrl: qcom: Add sc8180x TLMM driver Bjorn Andersson
2 siblings, 1 reply; 7+ messages in thread
From: Bjorn Andersson @ 2021-01-20 22:21 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Linus Walleij, Rob Herring
Cc: linux-arm-msm, linux-gpio, devicetree, linux-kernel
Several properties are shared between all TLMM bindings. By providing a
common binding to define these properties each platform's binding can be
reduced to just listing which of these properties should be checked for
- or further specified.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
.../bindings/pinctrl/qcom,tlmm-common.yaml | 85 +++++++++++++++++++
1 file changed, 85 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
new file mode 100644
index 000000000000..ab44952418ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,tlmm-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. TLMM definitions
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ This defines the common properties used to describe all Qualcomm TLMM
+ bindings and pinconf/pinmux states for these.
+
+properties:
+ interrupts:
+ description: Specifies the TLMM summary IRQ
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description:
+ Specifies the PIN numbers and Flags, as defined in defined in
+ include/dt-bindings/interrupt-controller/irq.h
+ const: 2
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ wakeup-parent:
+ description:
+ Specifying the interrupt-controller used to wake up the system when the
+ TLMM block has been powered down.
+ maxItems: 1
+
+ gpio-reserved-ranges:
+ description:
+ Pins can be reserved for trusted applications and thereby unaccessible
+ from the OS. This property can be used to mark the pins which resources
+ should not be accessed by the OS. Please see the ../gpio/gpio.txt for more
+ information.
+
+required:
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: true
+
+$defs:
+ qcom-tlmm-state:
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ bias-pull-down: true
+ bias-pull-up: true
+ bias-disable: true
+ input-enable: true
+ output-high: true
+ output-low: true
+ phandle: true
+
+ additionalProperties: true
+...
--
2.29.2
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/3] dt-bindings: pinctrl: qcom: Add sc8180x binding
2021-01-20 22:21 [PATCH 0/3] pinctrl: qcom: TLMM driver for SC8180x Bjorn Andersson
2021-01-20 22:21 ` [PATCH 1/3] dt-bindings: pinctrl: qcom: Define common TLMM binding Bjorn Andersson
@ 2021-01-20 22:21 ` Bjorn Andersson
2021-01-20 22:21 ` [PATCH 3/3] pinctrl: qcom: Add sc8180x TLMM driver Bjorn Andersson
2 siblings, 0 replies; 7+ messages in thread
From: Bjorn Andersson @ 2021-01-20 22:21 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Linus Walleij, Rob Herring
Cc: linux-arm-msm, linux-gpio, devicetree, linux-kernel
Add binding for the TLMM block in the Qualcomm SC8180X platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
.../pinctrl/qcom,sc8180x-pinctrl.yaml | 153 ++++++++++++++++++
1 file changed, 153 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
new file mode 100644
index 000000000000..3ebd80d3ca2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc8180x-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SC8180X TLMM block
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+ This binding describes the Top Level Mode Multiplexer block found in the
+ SC8180X platform.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sc8180x-tlmm
+
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: "west"
+ - const: "east"
+ - const: "south"
+
+ interrupts: true
+ interrupt-controller: true
+ '#interrupt-cells': true
+ gpio-controller: true
+ gpio-reserved-ranges: true
+ '#gpio-cells': true
+ gpio-ranges: true
+ wakeup-parent: true
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+patternProperties:
+ '-state$':
+ oneOf:
+ - $ref: "#/$defs/qcom-sc8180x-tlmm-state"
+ - patternProperties:
+ ".*":
+ $ref: "#/$defs/qcom-sc8180x-tlmm-state"
+
+'$defs':
+ qcom-sc8180x-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-8][0-9])$"
+ - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+ minItems: 1
+ maxItems: 16
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ adsp_ext, agera_pll, aoss_cti, atest_char, atest_tsens,
+ atest_tsens2, atest_usb0, atest_usb1, atest_usb2, atest_usb3,
+ atest_usb4, audio_ref, btfm_slimbus, cam_mclk, cci_async,
+ cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+ cci_timer4, cci_timer5, cci_timer6, cci_timer7, cci_timer8,
+ cci_timer9, cri_trng, dbg_out, ddr_bist, ddr_pxi, debug_hot,
+ dp_hot, edp_hot, edp_lcd, emac_phy, emac_pps, gcc_gp1, gcc_gp2,
+ gcc_gp3, gcc_gp4, gcc_gp5, gpio, gps, grfc, hs1_mi2s, hs2_mi2s,
+ hs3_mi2s, jitter_bist, lpass_slimbus, m_voc, mdp_vsync,
+ mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4,
+ mdp_vsync5, mss_lte, nav_pps, pa_indicator, pci_e0, pci_e1,
+ pci_e2, pci_e3, phase_flag, pll_bist, pll_bypassnl, pll_reset,
+ pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, qdss_gpio, qlink,
+ qspi0, qspi0_clk, qspi0_cs, qspi1, qspi1_clk, qspi1_cs,
+ qua_mi2s, qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8,
+ qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, qup17,
+ qup18, qup19, qup_l4, qup_l5, qup_l6, rgmii, sd_write, sdc4,
+ sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, spkr_i2s, ter_mi2s, tgu,
+ tsense_pwm1, tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt,
+ usb0_phy, usb1_phy, usb2phy_ac, vfr_1, vsense_trigger,
+ wlan1_adc, wlan2_adc, wmss_reset ]
+
+ bias-disable: true
+ bias-pull-down: true
+ bias-pull-up: true
+ drive-strength: true
+ input-enable: true
+ output-high: true
+ output-low: true
+ phandle: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pinctrl@3100000 {
+ compatible = "qcom,sc8180x-tlmm";
+ reg = <0x03100000 0x300000>,
+ <0x03500000 0x700000>,
+ <0x03d00000 0x300000>;
+ reg-names = "west", "east", "south";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 190>;
+
+ gpio-wo-subnode-state {
+ pins = "gpio1";
+ function = "gpio";
+ };
+
+ uart-w-subnodes-state {
+ rx {
+ pins = "gpio4";
+ function = "qup6";
+ bias-pull-up;
+ };
+
+ tx {
+ pins = "gpio5";
+ function = "qup6";
+ bias-disable;
+ };
+ };
+ };
+...
--
2.29.2
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 3/3] pinctrl: qcom: Add sc8180x TLMM driver
2021-01-20 22:21 [PATCH 0/3] pinctrl: qcom: TLMM driver for SC8180x Bjorn Andersson
2021-01-20 22:21 ` [PATCH 1/3] dt-bindings: pinctrl: qcom: Define common TLMM binding Bjorn Andersson
2021-01-20 22:21 ` [PATCH 2/3] dt-bindings: pinctrl: qcom: Add sc8180x binding Bjorn Andersson
@ 2021-01-20 22:21 ` Bjorn Andersson
2 siblings, 0 replies; 7+ messages in thread
From: Bjorn Andersson @ 2021-01-20 22:21 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Linus Walleij
Cc: Rob Herring, linux-arm-msm, linux-gpio, devicetree, linux-kernel
Add pinctrl driver for the sc8180x TLMM block.
A noteworthy difference from previous TLMM blocks is that the registers
for GPIO 177 through 189 are for some reason offset from the typical
layout. Other than that the driver is same old...
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/pinctrl/qcom/Kconfig | 9 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-sc8180x.c | 1624 ++++++++++++++++++++++++
3 files changed, 1634 insertions(+)
create mode 100644 drivers/pinctrl/qcom/pinctrl-sc8180x.c
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index a003776506d0..4984fe9f700d 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -220,6 +220,15 @@ config PINCTRL_SC7280
Qualcomm Technologies Inc TLMM block found on the Qualcomm
Technologies Inc SC7280 platform.
+config PINCTRL_SC8180X
+ tristate "Qualcomm Technologies Inc SC8180x pin controller driver"
+ depends on GPIOLIB && OF
+ select PINCTRL_MSM
+ help
+ This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+ Qualcomm Technologies Inc TLMM block found on the Qualcomm
+ Technologies Inc SC8180x platform.
+
config PINCTRL_SDM660
tristate "Qualcomm Technologies Inc SDM660 pin controller driver"
depends on GPIOLIB && OF
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index 91875a3f5ac4..468b840343fd 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o
obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o
obj-$(CONFIG_PINCTRL_SC7180) += pinctrl-sc7180.o
obj-$(CONFIG_PINCTRL_SC7280) += pinctrl-sc7280.o
+obj-$(CONFIG_PINCTRL_SC8180X) += pinctrl-sc8180x.o
obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o
obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o
obj-$(CONFIG_PINCTRL_SDX55) += pinctrl-sdx55.o
diff --git a/drivers/pinctrl/qcom/pinctrl-sc8180x.c b/drivers/pinctrl/qcom/pinctrl-sc8180x.c
new file mode 100644
index 000000000000..b765bf667574
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-sc8180x.c
@@ -0,0 +1,1624 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020-2021, Linaro Ltd.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+
+static const char * const sc8180x_tiles[] = {
+ "south",
+ "east",
+ "west"
+};
+
+enum {
+ SOUTH,
+ EAST,
+ WEST
+};
+
+#define FUNCTION(fname) \
+ [msm_mux_##fname] = { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+#define REG_SIZE 0x1000
+#define PINGROUP_OFFSET(id, _tile, offset, f1, f2, f3, f4, f5, f6, f7, f8, f9) \
+ { \
+ .name = "gpio" #id, \
+ .pins = gpio##id##_pins, \
+ .npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins), \
+ .funcs = (int[]){ \
+ msm_mux_gpio, /* gpio mode */ \
+ msm_mux_##f1, \
+ msm_mux_##f2, \
+ msm_mux_##f3, \
+ msm_mux_##f4, \
+ msm_mux_##f5, \
+ msm_mux_##f6, \
+ msm_mux_##f7, \
+ msm_mux_##f8, \
+ msm_mux_##f9 \
+ }, \
+ .nfuncs = 10, \
+ .ctl_reg = REG_SIZE * id + offset, \
+ .io_reg = REG_SIZE * id + 0x4 + offset, \
+ .intr_cfg_reg = REG_SIZE * id + 0x8 + offset, \
+ .intr_status_reg = REG_SIZE * id + 0xc + offset,\
+ .intr_target_reg = REG_SIZE * id + 0x8 + offset,\
+ .tile = _tile, \
+ .mux_bit = 2, \
+ .pull_bit = 0, \
+ .drv_bit = 6, \
+ .oe_bit = 9, \
+ .in_bit = 0, \
+ .out_bit = 1, \
+ .intr_enable_bit = 0, \
+ .intr_status_bit = 0, \
+ .intr_target_bit = 5, \
+ .intr_target_kpss_val = 3, \
+ .intr_raw_status_bit = 4, \
+ .intr_polarity_bit = 1, \
+ .intr_detection_bit = 2, \
+ .intr_detection_width = 2, \
+ }
+
+#define PINGROUP(id, _tile, f1, f2, f3, f4, f5, f6, f7, f8, f9) \
+ PINGROUP_OFFSET(id, _tile, 0x0, f1, f2, f3, f4, f5, f6, f7, f8, f9)
+
+#define SDC_QDSD_PINGROUP(pg_name, ctl, pull, drv) \
+ { \
+ .name = #pg_name, \
+ .pins = pg_name##_pins, \
+ .npins = (unsigned int)ARRAY_SIZE(pg_name##_pins), \
+ .ctl_reg = ctl, \
+ .io_reg = 0, \
+ .intr_cfg_reg = 0, \
+ .intr_status_reg = 0, \
+ .intr_target_reg = 0, \
+ .tile = EAST, \
+ .mux_bit = -1, \
+ .pull_bit = pull, \
+ .drv_bit = drv, \
+ .oe_bit = -1, \
+ .in_bit = -1, \
+ .out_bit = -1, \
+ .intr_enable_bit = -1, \
+ .intr_status_bit = -1, \
+ .intr_target_bit = -1, \
+ .intr_raw_status_bit = -1, \
+ .intr_polarity_bit = -1, \
+ .intr_detection_bit = -1, \
+ .intr_detection_width = -1, \
+ }
+
+#define UFS_RESET(pg_name) \
+ { \
+ .name = #pg_name, \
+ .pins = pg_name##_pins, \
+ .npins = (unsigned int)ARRAY_SIZE(pg_name##_pins), \
+ .ctl_reg = 0xb6000, \
+ .io_reg = 0xb6004, \
+ .intr_cfg_reg = 0, \
+ .intr_status_reg = 0, \
+ .intr_target_reg = 0, \
+ .tile = SOUTH, \
+ .mux_bit = -1, \
+ .pull_bit = 3, \
+ .drv_bit = 0, \
+ .oe_bit = -1, \
+ .in_bit = -1, \
+ .out_bit = 0, \
+ .intr_enable_bit = -1, \
+ .intr_status_bit = -1, \
+ .intr_target_bit = -1, \
+ .intr_raw_status_bit = -1, \
+ .intr_polarity_bit = -1, \
+ .intr_detection_bit = -1, \
+ .intr_detection_width = -1, \
+ }
+static const struct pinctrl_pin_desc sc8180x_pins[] = {
+ PINCTRL_PIN(0, "GPIO_0"),
+ PINCTRL_PIN(1, "GPIO_1"),
+ PINCTRL_PIN(2, "GPIO_2"),
+ PINCTRL_PIN(3, "GPIO_3"),
+ PINCTRL_PIN(4, "GPIO_4"),
+ PINCTRL_PIN(5, "GPIO_5"),
+ PINCTRL_PIN(6, "GPIO_6"),
+ PINCTRL_PIN(7, "GPIO_7"),
+ PINCTRL_PIN(8, "GPIO_8"),
+ PINCTRL_PIN(9, "GPIO_9"),
+ PINCTRL_PIN(10, "GPIO_10"),
+ PINCTRL_PIN(11, "GPIO_11"),
+ PINCTRL_PIN(12, "GPIO_12"),
+ PINCTRL_PIN(13, "GPIO_13"),
+ PINCTRL_PIN(14, "GPIO_14"),
+ PINCTRL_PIN(15, "GPIO_15"),
+ PINCTRL_PIN(16, "GPIO_16"),
+ PINCTRL_PIN(17, "GPIO_17"),
+ PINCTRL_PIN(18, "GPIO_18"),
+ PINCTRL_PIN(19, "GPIO_19"),
+ PINCTRL_PIN(20, "GPIO_20"),
+ PINCTRL_PIN(21, "GPIO_21"),
+ PINCTRL_PIN(22, "GPIO_22"),
+ PINCTRL_PIN(23, "GPIO_23"),
+ PINCTRL_PIN(24, "GPIO_24"),
+ PINCTRL_PIN(25, "GPIO_25"),
+ PINCTRL_PIN(26, "GPIO_26"),
+ PINCTRL_PIN(27, "GPIO_27"),
+ PINCTRL_PIN(28, "GPIO_28"),
+ PINCTRL_PIN(29, "GPIO_29"),
+ PINCTRL_PIN(30, "GPIO_30"),
+ PINCTRL_PIN(31, "GPIO_31"),
+ PINCTRL_PIN(32, "GPIO_32"),
+ PINCTRL_PIN(33, "GPIO_33"),
+ PINCTRL_PIN(34, "GPIO_34"),
+ PINCTRL_PIN(35, "GPIO_35"),
+ PINCTRL_PIN(36, "GPIO_36"),
+ PINCTRL_PIN(37, "GPIO_37"),
+ PINCTRL_PIN(38, "GPIO_38"),
+ PINCTRL_PIN(39, "GPIO_39"),
+ PINCTRL_PIN(40, "GPIO_40"),
+ PINCTRL_PIN(41, "GPIO_41"),
+ PINCTRL_PIN(42, "GPIO_42"),
+ PINCTRL_PIN(43, "GPIO_43"),
+ PINCTRL_PIN(44, "GPIO_44"),
+ PINCTRL_PIN(45, "GPIO_45"),
+ PINCTRL_PIN(46, "GPIO_46"),
+ PINCTRL_PIN(47, "GPIO_47"),
+ PINCTRL_PIN(48, "GPIO_48"),
+ PINCTRL_PIN(49, "GPIO_49"),
+ PINCTRL_PIN(50, "GPIO_50"),
+ PINCTRL_PIN(51, "GPIO_51"),
+ PINCTRL_PIN(52, "GPIO_52"),
+ PINCTRL_PIN(53, "GPIO_53"),
+ PINCTRL_PIN(54, "GPIO_54"),
+ PINCTRL_PIN(55, "GPIO_55"),
+ PINCTRL_PIN(56, "GPIO_56"),
+ PINCTRL_PIN(57, "GPIO_57"),
+ PINCTRL_PIN(58, "GPIO_58"),
+ PINCTRL_PIN(59, "GPIO_59"),
+ PINCTRL_PIN(60, "GPIO_60"),
+ PINCTRL_PIN(61, "GPIO_61"),
+ PINCTRL_PIN(62, "GPIO_62"),
+ PINCTRL_PIN(63, "GPIO_63"),
+ PINCTRL_PIN(64, "GPIO_64"),
+ PINCTRL_PIN(65, "GPIO_65"),
+ PINCTRL_PIN(66, "GPIO_66"),
+ PINCTRL_PIN(67, "GPIO_67"),
+ PINCTRL_PIN(68, "GPIO_68"),
+ PINCTRL_PIN(69, "GPIO_69"),
+ PINCTRL_PIN(70, "GPIO_70"),
+ PINCTRL_PIN(71, "GPIO_71"),
+ PINCTRL_PIN(72, "GPIO_72"),
+ PINCTRL_PIN(73, "GPIO_73"),
+ PINCTRL_PIN(74, "GPIO_74"),
+ PINCTRL_PIN(75, "GPIO_75"),
+ PINCTRL_PIN(76, "GPIO_76"),
+ PINCTRL_PIN(77, "GPIO_77"),
+ PINCTRL_PIN(78, "GPIO_78"),
+ PINCTRL_PIN(79, "GPIO_79"),
+ PINCTRL_PIN(80, "GPIO_80"),
+ PINCTRL_PIN(81, "GPIO_81"),
+ PINCTRL_PIN(82, "GPIO_82"),
+ PINCTRL_PIN(83, "GPIO_83"),
+ PINCTRL_PIN(84, "GPIO_84"),
+ PINCTRL_PIN(85, "GPIO_85"),
+ PINCTRL_PIN(86, "GPIO_86"),
+ PINCTRL_PIN(87, "GPIO_87"),
+ PINCTRL_PIN(88, "GPIO_88"),
+ PINCTRL_PIN(89, "GPIO_89"),
+ PINCTRL_PIN(90, "GPIO_90"),
+ PINCTRL_PIN(91, "GPIO_91"),
+ PINCTRL_PIN(92, "GPIO_92"),
+ PINCTRL_PIN(93, "GPIO_93"),
+ PINCTRL_PIN(94, "GPIO_94"),
+ PINCTRL_PIN(95, "GPIO_95"),
+ PINCTRL_PIN(96, "GPIO_96"),
+ PINCTRL_PIN(97, "GPIO_97"),
+ PINCTRL_PIN(98, "GPIO_98"),
+ PINCTRL_PIN(99, "GPIO_99"),
+ PINCTRL_PIN(100, "GPIO_100"),
+ PINCTRL_PIN(101, "GPIO_101"),
+ PINCTRL_PIN(102, "GPIO_102"),
+ PINCTRL_PIN(103, "GPIO_103"),
+ PINCTRL_PIN(104, "GPIO_104"),
+ PINCTRL_PIN(105, "GPIO_105"),
+ PINCTRL_PIN(106, "GPIO_106"),
+ PINCTRL_PIN(107, "GPIO_107"),
+ PINCTRL_PIN(108, "GPIO_108"),
+ PINCTRL_PIN(109, "GPIO_109"),
+ PINCTRL_PIN(110, "GPIO_110"),
+ PINCTRL_PIN(111, "GPIO_111"),
+ PINCTRL_PIN(112, "GPIO_112"),
+ PINCTRL_PIN(113, "GPIO_113"),
+ PINCTRL_PIN(114, "GPIO_114"),
+ PINCTRL_PIN(115, "GPIO_115"),
+ PINCTRL_PIN(116, "GPIO_116"),
+ PINCTRL_PIN(117, "GPIO_117"),
+ PINCTRL_PIN(118, "GPIO_118"),
+ PINCTRL_PIN(119, "GPIO_119"),
+ PINCTRL_PIN(120, "GPIO_120"),
+ PINCTRL_PIN(121, "GPIO_121"),
+ PINCTRL_PIN(122, "GPIO_122"),
+ PINCTRL_PIN(123, "GPIO_123"),
+ PINCTRL_PIN(124, "GPIO_124"),
+ PINCTRL_PIN(125, "GPIO_125"),
+ PINCTRL_PIN(126, "GPIO_126"),
+ PINCTRL_PIN(127, "GPIO_127"),
+ PINCTRL_PIN(128, "GPIO_128"),
+ PINCTRL_PIN(129, "GPIO_129"),
+ PINCTRL_PIN(130, "GPIO_130"),
+ PINCTRL_PIN(131, "GPIO_131"),
+ PINCTRL_PIN(132, "GPIO_132"),
+ PINCTRL_PIN(133, "GPIO_133"),
+ PINCTRL_PIN(134, "GPIO_134"),
+ PINCTRL_PIN(135, "GPIO_135"),
+ PINCTRL_PIN(136, "GPIO_136"),
+ PINCTRL_PIN(137, "GPIO_137"),
+ PINCTRL_PIN(138, "GPIO_138"),
+ PINCTRL_PIN(139, "GPIO_139"),
+ PINCTRL_PIN(140, "GPIO_140"),
+ PINCTRL_PIN(141, "GPIO_141"),
+ PINCTRL_PIN(142, "GPIO_142"),
+ PINCTRL_PIN(143, "GPIO_143"),
+ PINCTRL_PIN(144, "GPIO_144"),
+ PINCTRL_PIN(145, "GPIO_145"),
+ PINCTRL_PIN(146, "GPIO_146"),
+ PINCTRL_PIN(147, "GPIO_147"),
+ PINCTRL_PIN(148, "GPIO_148"),
+ PINCTRL_PIN(149, "GPIO_149"),
+ PINCTRL_PIN(150, "GPIO_150"),
+ PINCTRL_PIN(151, "GPIO_151"),
+ PINCTRL_PIN(152, "GPIO_152"),
+ PINCTRL_PIN(153, "GPIO_153"),
+ PINCTRL_PIN(154, "GPIO_154"),
+ PINCTRL_PIN(155, "GPIO_155"),
+ PINCTRL_PIN(156, "GPIO_156"),
+ PINCTRL_PIN(157, "GPIO_157"),
+ PINCTRL_PIN(158, "GPIO_158"),
+ PINCTRL_PIN(159, "GPIO_159"),
+ PINCTRL_PIN(160, "GPIO_160"),
+ PINCTRL_PIN(161, "GPIO_161"),
+ PINCTRL_PIN(162, "GPIO_162"),
+ PINCTRL_PIN(163, "GPIO_163"),
+ PINCTRL_PIN(164, "GPIO_164"),
+ PINCTRL_PIN(165, "GPIO_165"),
+ PINCTRL_PIN(166, "GPIO_166"),
+ PINCTRL_PIN(167, "GPIO_167"),
+ PINCTRL_PIN(168, "GPIO_168"),
+ PINCTRL_PIN(169, "GPIO_169"),
+ PINCTRL_PIN(170, "GPIO_170"),
+ PINCTRL_PIN(171, "GPIO_171"),
+ PINCTRL_PIN(172, "GPIO_172"),
+ PINCTRL_PIN(173, "GPIO_173"),
+ PINCTRL_PIN(174, "GPIO_174"),
+ PINCTRL_PIN(175, "GPIO_175"),
+ PINCTRL_PIN(176, "GPIO_176"),
+ PINCTRL_PIN(177, "GPIO_177"),
+ PINCTRL_PIN(178, "GPIO_178"),
+ PINCTRL_PIN(179, "GPIO_179"),
+ PINCTRL_PIN(180, "GPIO_180"),
+ PINCTRL_PIN(181, "GPIO_181"),
+ PINCTRL_PIN(182, "GPIO_182"),
+ PINCTRL_PIN(183, "GPIO_183"),
+ PINCTRL_PIN(184, "GPIO_184"),
+ PINCTRL_PIN(185, "GPIO_185"),
+ PINCTRL_PIN(186, "GPIO_186"),
+ PINCTRL_PIN(187, "GPIO_187"),
+ PINCTRL_PIN(188, "GPIO_188"),
+ PINCTRL_PIN(189, "GPIO_189"),
+ PINCTRL_PIN(190, "UFS_RESET"),
+ PINCTRL_PIN(191, "SDC2_CLK"),
+ PINCTRL_PIN(192, "SDC2_CMD"),
+ PINCTRL_PIN(193, "SDC2_DATA"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) \
+ static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+DECLARE_MSM_GPIO_PINS(53);
+DECLARE_MSM_GPIO_PINS(54);
+DECLARE_MSM_GPIO_PINS(55);
+DECLARE_MSM_GPIO_PINS(56);
+DECLARE_MSM_GPIO_PINS(57);
+DECLARE_MSM_GPIO_PINS(58);
+DECLARE_MSM_GPIO_PINS(59);
+DECLARE_MSM_GPIO_PINS(60);
+DECLARE_MSM_GPIO_PINS(61);
+DECLARE_MSM_GPIO_PINS(62);
+DECLARE_MSM_GPIO_PINS(63);
+DECLARE_MSM_GPIO_PINS(64);
+DECLARE_MSM_GPIO_PINS(65);
+DECLARE_MSM_GPIO_PINS(66);
+DECLARE_MSM_GPIO_PINS(67);
+DECLARE_MSM_GPIO_PINS(68);
+DECLARE_MSM_GPIO_PINS(69);
+DECLARE_MSM_GPIO_PINS(70);
+DECLARE_MSM_GPIO_PINS(71);
+DECLARE_MSM_GPIO_PINS(72);
+DECLARE_MSM_GPIO_PINS(73);
+DECLARE_MSM_GPIO_PINS(74);
+DECLARE_MSM_GPIO_PINS(75);
+DECLARE_MSM_GPIO_PINS(76);
+DECLARE_MSM_GPIO_PINS(77);
+DECLARE_MSM_GPIO_PINS(78);
+DECLARE_MSM_GPIO_PINS(79);
+DECLARE_MSM_GPIO_PINS(80);
+DECLARE_MSM_GPIO_PINS(81);
+DECLARE_MSM_GPIO_PINS(82);
+DECLARE_MSM_GPIO_PINS(83);
+DECLARE_MSM_GPIO_PINS(84);
+DECLARE_MSM_GPIO_PINS(85);
+DECLARE_MSM_GPIO_PINS(86);
+DECLARE_MSM_GPIO_PINS(87);
+DECLARE_MSM_GPIO_PINS(88);
+DECLARE_MSM_GPIO_PINS(89);
+DECLARE_MSM_GPIO_PINS(90);
+DECLARE_MSM_GPIO_PINS(91);
+DECLARE_MSM_GPIO_PINS(92);
+DECLARE_MSM_GPIO_PINS(93);
+DECLARE_MSM_GPIO_PINS(94);
+DECLARE_MSM_GPIO_PINS(95);
+DECLARE_MSM_GPIO_PINS(96);
+DECLARE_MSM_GPIO_PINS(97);
+DECLARE_MSM_GPIO_PINS(98);
+DECLARE_MSM_GPIO_PINS(99);
+DECLARE_MSM_GPIO_PINS(100);
+DECLARE_MSM_GPIO_PINS(101);
+DECLARE_MSM_GPIO_PINS(102);
+DECLARE_MSM_GPIO_PINS(103);
+DECLARE_MSM_GPIO_PINS(104);
+DECLARE_MSM_GPIO_PINS(105);
+DECLARE_MSM_GPIO_PINS(106);
+DECLARE_MSM_GPIO_PINS(107);
+DECLARE_MSM_GPIO_PINS(108);
+DECLARE_MSM_GPIO_PINS(109);
+DECLARE_MSM_GPIO_PINS(110);
+DECLARE_MSM_GPIO_PINS(111);
+DECLARE_MSM_GPIO_PINS(112);
+DECLARE_MSM_GPIO_PINS(113);
+DECLARE_MSM_GPIO_PINS(114);
+DECLARE_MSM_GPIO_PINS(115);
+DECLARE_MSM_GPIO_PINS(116);
+DECLARE_MSM_GPIO_PINS(117);
+DECLARE_MSM_GPIO_PINS(118);
+DECLARE_MSM_GPIO_PINS(119);
+DECLARE_MSM_GPIO_PINS(120);
+DECLARE_MSM_GPIO_PINS(121);
+DECLARE_MSM_GPIO_PINS(122);
+DECLARE_MSM_GPIO_PINS(123);
+DECLARE_MSM_GPIO_PINS(124);
+DECLARE_MSM_GPIO_PINS(125);
+DECLARE_MSM_GPIO_PINS(126);
+DECLARE_MSM_GPIO_PINS(127);
+DECLARE_MSM_GPIO_PINS(128);
+DECLARE_MSM_GPIO_PINS(129);
+DECLARE_MSM_GPIO_PINS(130);
+DECLARE_MSM_GPIO_PINS(131);
+DECLARE_MSM_GPIO_PINS(132);
+DECLARE_MSM_GPIO_PINS(133);
+DECLARE_MSM_GPIO_PINS(134);
+DECLARE_MSM_GPIO_PINS(135);
+DECLARE_MSM_GPIO_PINS(136);
+DECLARE_MSM_GPIO_PINS(137);
+DECLARE_MSM_GPIO_PINS(138);
+DECLARE_MSM_GPIO_PINS(139);
+DECLARE_MSM_GPIO_PINS(140);
+DECLARE_MSM_GPIO_PINS(141);
+DECLARE_MSM_GPIO_PINS(142);
+DECLARE_MSM_GPIO_PINS(143);
+DECLARE_MSM_GPIO_PINS(144);
+DECLARE_MSM_GPIO_PINS(145);
+DECLARE_MSM_GPIO_PINS(146);
+DECLARE_MSM_GPIO_PINS(147);
+DECLARE_MSM_GPIO_PINS(148);
+DECLARE_MSM_GPIO_PINS(149);
+DECLARE_MSM_GPIO_PINS(150);
+DECLARE_MSM_GPIO_PINS(151);
+DECLARE_MSM_GPIO_PINS(152);
+DECLARE_MSM_GPIO_PINS(153);
+DECLARE_MSM_GPIO_PINS(154);
+DECLARE_MSM_GPIO_PINS(155);
+DECLARE_MSM_GPIO_PINS(156);
+DECLARE_MSM_GPIO_PINS(157);
+DECLARE_MSM_GPIO_PINS(158);
+DECLARE_MSM_GPIO_PINS(159);
+DECLARE_MSM_GPIO_PINS(160);
+DECLARE_MSM_GPIO_PINS(161);
+DECLARE_MSM_GPIO_PINS(162);
+DECLARE_MSM_GPIO_PINS(163);
+DECLARE_MSM_GPIO_PINS(164);
+DECLARE_MSM_GPIO_PINS(165);
+DECLARE_MSM_GPIO_PINS(166);
+DECLARE_MSM_GPIO_PINS(167);
+DECLARE_MSM_GPIO_PINS(168);
+DECLARE_MSM_GPIO_PINS(169);
+DECLARE_MSM_GPIO_PINS(170);
+DECLARE_MSM_GPIO_PINS(171);
+DECLARE_MSM_GPIO_PINS(172);
+DECLARE_MSM_GPIO_PINS(173);
+DECLARE_MSM_GPIO_PINS(174);
+DECLARE_MSM_GPIO_PINS(175);
+DECLARE_MSM_GPIO_PINS(176);
+DECLARE_MSM_GPIO_PINS(177);
+DECLARE_MSM_GPIO_PINS(178);
+DECLARE_MSM_GPIO_PINS(179);
+DECLARE_MSM_GPIO_PINS(180);
+DECLARE_MSM_GPIO_PINS(181);
+DECLARE_MSM_GPIO_PINS(182);
+DECLARE_MSM_GPIO_PINS(183);
+DECLARE_MSM_GPIO_PINS(184);
+DECLARE_MSM_GPIO_PINS(185);
+DECLARE_MSM_GPIO_PINS(186);
+DECLARE_MSM_GPIO_PINS(187);
+DECLARE_MSM_GPIO_PINS(188);
+DECLARE_MSM_GPIO_PINS(189);
+
+static const unsigned int sdc2_clk_pins[] = { 190 };
+static const unsigned int sdc2_cmd_pins[] = { 191 };
+static const unsigned int sdc2_data_pins[] = { 192 };
+static const unsigned int ufs_reset_pins[] = { 193 };
+
+enum sc8180x_functions {
+ msm_mux_adsp_ext,
+ msm_mux_agera_pll,
+ msm_mux_aoss_cti,
+ msm_mux_atest_char,
+ msm_mux_atest_tsens,
+ msm_mux_atest_tsens2,
+ msm_mux_atest_usb0,
+ msm_mux_atest_usb1,
+ msm_mux_atest_usb2,
+ msm_mux_atest_usb3,
+ msm_mux_atest_usb4,
+ msm_mux_audio_ref,
+ msm_mux_btfm_slimbus,
+ msm_mux_cam_mclk,
+ msm_mux_cci_async,
+ msm_mux_cci_i2c,
+ msm_mux_cci_timer0,
+ msm_mux_cci_timer1,
+ msm_mux_cci_timer2,
+ msm_mux_cci_timer3,
+ msm_mux_cci_timer4,
+ msm_mux_cci_timer5,
+ msm_mux_cci_timer6,
+ msm_mux_cci_timer7,
+ msm_mux_cci_timer8,
+ msm_mux_cci_timer9,
+ msm_mux_cri_trng,
+ msm_mux_dbg_out,
+ msm_mux_ddr_bist,
+ msm_mux_ddr_pxi,
+ msm_mux_debug_hot,
+ msm_mux_dp_hot,
+ msm_mux_edp_hot,
+ msm_mux_edp_lcd,
+ msm_mux_emac_phy,
+ msm_mux_emac_pps,
+ msm_mux_gcc_gp1,
+ msm_mux_gcc_gp2,
+ msm_mux_gcc_gp3,
+ msm_mux_gcc_gp4,
+ msm_mux_gcc_gp5,
+ msm_mux_gpio,
+ msm_mux_gps,
+ msm_mux_grfc,
+ msm_mux_hs1_mi2s,
+ msm_mux_hs2_mi2s,
+ msm_mux_hs3_mi2s,
+ msm_mux_jitter_bist,
+ msm_mux_lpass_slimbus,
+ msm_mux_m_voc,
+ msm_mux_mdp_vsync,
+ msm_mux_mdp_vsync0,
+ msm_mux_mdp_vsync1,
+ msm_mux_mdp_vsync2,
+ msm_mux_mdp_vsync3,
+ msm_mux_mdp_vsync4,
+ msm_mux_mdp_vsync5,
+ msm_mux_mss_lte,
+ msm_mux_nav_pps,
+ msm_mux_pa_indicator,
+ msm_mux_pci_e0,
+ msm_mux_pci_e1,
+ msm_mux_pci_e2,
+ msm_mux_pci_e3,
+ msm_mux_phase_flag,
+ msm_mux_pll_bist,
+ msm_mux_pll_bypassnl,
+ msm_mux_pll_reset,
+ msm_mux_pri_mi2s,
+ msm_mux_pri_mi2s_ws,
+ msm_mux_prng_rosc,
+ msm_mux_qdss_cti,
+ msm_mux_qdss_gpio,
+ msm_mux_qlink,
+ msm_mux_qspi0,
+ msm_mux_qspi0_clk,
+ msm_mux_qspi0_cs,
+ msm_mux_qspi1,
+ msm_mux_qspi1_clk,
+ msm_mux_qspi1_cs,
+ msm_mux_qua_mi2s,
+ msm_mux_qup0,
+ msm_mux_qup1,
+ msm_mux_qup2,
+ msm_mux_qup3,
+ msm_mux_qup4,
+ msm_mux_qup5,
+ msm_mux_qup6,
+ msm_mux_qup7,
+ msm_mux_qup8,
+ msm_mux_qup9,
+ msm_mux_qup10,
+ msm_mux_qup11,
+ msm_mux_qup12,
+ msm_mux_qup13,
+ msm_mux_qup14,
+ msm_mux_qup15,
+ msm_mux_qup16,
+ msm_mux_qup17,
+ msm_mux_qup18,
+ msm_mux_qup19,
+ msm_mux_qup_l4,
+ msm_mux_qup_l5,
+ msm_mux_qup_l6,
+ msm_mux_rgmii,
+ msm_mux_sd_write,
+ msm_mux_sdc4,
+ msm_mux_sdc4_clk,
+ msm_mux_sdc4_cmd,
+ msm_mux_sec_mi2s,
+ msm_mux_sp_cmu,
+ msm_mux_spkr_i2s,
+ msm_mux_ter_mi2s,
+ msm_mux_tgu,
+ msm_mux_tsense_pwm1,
+ msm_mux_tsense_pwm2,
+ msm_mux_tsif1,
+ msm_mux_tsif2,
+ msm_mux_uim1,
+ msm_mux_uim2,
+ msm_mux_uim_batt,
+ msm_mux_usb0_phy,
+ msm_mux_usb1_phy,
+ msm_mux_usb2phy_ac,
+ msm_mux_vfr_1,
+ msm_mux_vsense_trigger,
+ msm_mux_wlan1_adc,
+ msm_mux_wlan2_adc,
+ msm_mux_wmss_reset,
+ msm_mux__,
+};
+
+static const char * const adsp_ext_groups[] = {
+ "gpio115",
+};
+
+static const char * const agera_pll_groups[] = {
+ "gpio37",
+};
+
+static const char * const aoss_cti_groups[] = {
+ "gpio113",
+};
+
+static const char * const atest_char_groups[] = {
+ "gpio133", "gpio134", "gpio135", "gpio140", "gpio142",
+};
+
+static const char * const atest_tsens2_groups[] = {
+ "gpio62",
+};
+
+static const char * const atest_tsens_groups[] = {
+ "gpio93",
+};
+
+static const char * const atest_usb0_groups[] = {
+ "gpio90", "gpio91", "gpio92", "gpio93", "gpio94",
+};
+
+static const char * const atest_usb1_groups[] = {
+ "gpio60", "gpio62", "gpio63", "gpio64", "gpio65",
+};
+
+static const char * const atest_usb2_groups[] = {
+ "gpio34", "gpio95", "gpio102", "gpio121", "gpio122",
+};
+
+static const char * const atest_usb3_groups[] = {
+ "gpio68", "gpio71", "gpio72", "gpio73", "gpio74",
+};
+
+static const char * const atest_usb4_groups[] = {
+ "gpio75", "gpio76", "gpio77", "gpio78", "gpio88",
+};
+
+static const char * const audio_ref_groups[] = {
+ "gpio148",
+};
+
+static const char * const btfm_slimbus_groups[] = {
+ "gpio153", "gpio154",
+};
+
+static const char * const cam_mclk_groups[] = {
+ "gpio13", "gpio14", "gpio15", "gpio16", "gpio25", "gpio179", "gpio180",
+ "gpio181",
+};
+
+static const char * const cci_async_groups[] = {
+ "gpio24", "gpio25", "gpio26", "gpio176", "gpio185", "gpio186",
+};
+
+static const char * const cci_i2c_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3", "gpio17", "gpio18", "gpio19",
+ "gpio20", "gpio31", "gpio32", "gpio33", "gpio34", "gpio39", "gpio40",
+ "gpio41", "gpio42",
+};
+
+static const char * const cci_timer0_groups[] = {
+ "gpio21",
+};
+
+static const char * const cci_timer1_groups[] = {
+ "gpio22",
+};
+
+static const char * const cci_timer2_groups[] = {
+ "gpio23",
+};
+
+static const char * const cci_timer3_groups[] = {
+ "gpio24",
+};
+
+static const char * const cci_timer4_groups[] = {
+ "gpio178",
+};
+
+static const char * const cci_timer5_groups[] = {
+ "gpio182",
+};
+
+static const char * const cci_timer6_groups[] = {
+ "gpio183",
+};
+
+static const char * const cci_timer7_groups[] = {
+ "gpio184",
+};
+
+static const char * const cci_timer8_groups[] = {
+ "gpio185",
+};
+
+static const char * const cci_timer9_groups[] = {
+ "gpio186",
+};
+
+static const char * const cri_trng_groups[] = {
+ "gpio159",
+ "gpio160",
+ "gpio161",
+};
+
+static const char * const dbg_out_groups[] = {
+ "gpio34",
+};
+
+static const char * const ddr_bist_groups[] = {
+ "gpio98", "gpio99", "gpio145", "gpio146",
+};
+
+static const char * const ddr_pxi_groups[] = {
+ "gpio60", "gpio62", "gpio63", "gpio64", "gpio65", "gpio68", "gpio71",
+ "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77", "gpio78",
+ "gpio88", "gpio90",
+};
+
+static const char * const debug_hot_groups[] = {
+ "gpio7",
+};
+
+static const char * const dp_hot_groups[] = {
+ "gpio189",
+};
+
+static const char * const edp_hot_groups[] = {
+ "gpio10",
+};
+
+static const char * const edp_lcd_groups[] = {
+ "gpio11",
+};
+
+static const char * const emac_phy_groups[] = {
+ "gpio124",
+};
+
+static const char * const emac_pps_groups[] = {
+ "gpio81",
+};
+
+static const char * const gcc_gp1_groups[] = {
+ "gpio131", "gpio136",
+};
+
+static const char * const gcc_gp2_groups[] = {
+ "gpio21", "gpio137",
+};
+
+static const char * const gcc_gp3_groups[] = {
+ "gpio22", "gpio138",
+};
+
+static const char * const gcc_gp4_groups[] = {
+ "gpio139", "gpio182",
+};
+
+static const char * const gcc_gp5_groups[] = {
+ "gpio140", "gpio183",
+};
+
+static const char * const gpio_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio12", "gpio13",
+ "gpio14", "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20",
+ "gpio21", "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27",
+ "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34",
+ "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41",
+ "gpio42", "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48",
+ "gpio49", "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55",
+ "gpio56", "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62",
+ "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69",
+ "gpio70", "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76",
+ "gpio77", "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83",
+ "gpio84", "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90",
+ "gpio91", "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97",
+ "gpio98", "gpio99", "gpio100", "gpio101", "gpio102", "gpio103",
+ "gpio104", "gpio105", "gpio106", "gpio107", "gpio108", "gpio109",
+ "gpio110", "gpio111", "gpio112", "gpio113", "gpio114", "gpio115",
+ "gpio116", "gpio117", "gpio118", "gpio119", "gpio120", "gpio121",
+ "gpio122", "gpio123", "gpio124", "gpio125", "gpio126", "gpio127",
+ "gpio128", "gpio129", "gpio130", "gpio131", "gpio132", "gpio133",
+ "gpio134", "gpio135", "gpio136", "gpio137", "gpio138", "gpio139",
+ "gpio140", "gpio141", "gpio142", "gpio143", "gpio144", "gpio145",
+ "gpio146", "gpio147", "gpio148", "gpio149", "gpio150", "gpio151",
+ "gpio152", "gpio153", "gpio154", "gpio155", "gpio156", "gpio157",
+ "gpio158", "gpio159", "gpio160", "gpio161", "gpio162", "gpio163",
+ "gpio164", "gpio165", "gpio166", "gpio167", "gpio168", "gpio169",
+ "gpio170", "gpio171", "gpio172", "gpio173", "gpio174", "gpio175",
+ "gpio176", "gpio177", "gpio177", "gpio178", "gpio179", "gpio180",
+ "gpio181", "gpio182", "gpio183", "gpio184", "gpio185", "gpio186",
+ "gpio186", "gpio187", "gpio187", "gpio188", "gpio188", "gpio189",
+};
+
+static const char * const gps_groups[] = {
+ "gpio60", "gpio76", "gpio77", "gpio81", "gpio82",
+};
+
+static const char * const grfc_groups[] = {
+ "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio71", "gpio72",
+ "gpio73", "gpio74", "gpio75", "gpio76", "gpio77", "gpio78", "gpio79",
+ "gpio80", "gpio81", "gpio82",
+};
+
+static const char * const hs1_mi2s_groups[] = {
+ "gpio155", "gpio156", "gpio157", "gpio158", "gpio159",
+};
+
+static const char * const hs2_mi2s_groups[] = {
+ "gpio160", "gpio161", "gpio162", "gpio163", "gpio164",
+};
+
+static const char * const hs3_mi2s_groups[] = {
+ "gpio125", "gpio165", "gpio166", "gpio167", "gpio168",
+};
+
+static const char * const jitter_bist_groups[] = {
+ "gpio129",
+};
+
+static const char * const lpass_slimbus_groups[] = {
+ "gpio149", "gpio150", "gpio151", "gpio152",
+};
+
+static const char * const m_voc_groups[] = {
+ "gpio10",
+};
+
+static const char * const mdp_vsync0_groups[] = {
+ "gpio89",
+};
+
+static const char * const mdp_vsync1_groups[] = {
+ "gpio89",
+};
+
+static const char * const mdp_vsync2_groups[] = {
+ "gpio89",
+};
+
+static const char * const mdp_vsync3_groups[] = {
+ "gpio89",
+};
+
+static const char * const mdp_vsync4_groups[] = {
+ "gpio89",
+};
+
+static const char * const mdp_vsync5_groups[] = {
+ "gpio89",
+};
+
+static const char * const mdp_vsync_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio60", "gpio82",
+};
+
+static const char * const mss_lte_groups[] = {
+ "gpio69", "gpio70",
+};
+
+static const char * const nav_pps_groups[] = {
+ "gpio60", "gpio60", "gpio76", "gpio76", "gpio77", "gpio77", "gpio81",
+ "gpio81", "gpio82", "gpio82",
+};
+
+static const char * const pa_indicator_groups[] = {
+ "gpio68",
+};
+
+static const char * const pci_e0_groups[] = {
+ "gpio35", "gpio36",
+};
+
+static const char * const pci_e1_groups[] = {
+ "gpio102", "gpio103",
+};
+
+static const char * const pci_e2_groups[] = {
+ "gpio175", "gpio176",
+};
+
+static const char * const pci_e3_groups[] = {
+ "gpio178", "gpio179",
+};
+
+static const char * const phase_flag_groups[] = {
+ "gpio4", "gpio5", "gpio6", "gpio7", "gpio33", "gpio53", "gpio54",
+ "gpio102", "gpio120", "gpio121", "gpio122", "gpio123", "gpio125",
+ "gpio148", "gpio149", "gpio150", "gpio151", "gpio152", "gpio155",
+ "gpio156", "gpio157", "gpio158", "gpio159", "gpio160", "gpio161",
+ "gpio162", "gpio163", "gpio164", "gpio165", "gpio166", "gpio167",
+ "gpio168",
+};
+
+static const char * const pll_bist_groups[] = {
+ "gpio130",
+};
+
+static const char * const pll_bypassnl_groups[] = {
+ "gpio100",
+};
+
+static const char * const pll_reset_groups[] = {
+ "gpio101",
+};
+
+static const char * const pri_mi2s_groups[] = {
+ "gpio143", "gpio144", "gpio146", "gpio147",
+};
+
+static const char * const pri_mi2s_ws_groups[] = {
+ "gpio145",
+};
+
+static const char * const prng_rosc_groups[] = {
+ "gpio163",
+};
+
+static const char * const qdss_cti_groups[] = {
+ "gpio49", "gpio50", "gpio81", "gpio82", "gpio89", "gpio90", "gpio141",
+ "gpio142",
+};
+
+static const char * const qdss_gpio_groups[] = {
+ "gpio13", "gpio14", "gpio15", "gpio16", "gpio17", "gpio18", "gpio19",
+ "gpio20", "gpio21", "gpio22", "gpio23", "gpio24", "gpio25", "gpio26",
+ "gpio27", "gpio28", "gpio29", "gpio30", "gpio39", "gpio40", "gpio41",
+ "gpio42", "gpio92", "gpio114", "gpio115", "gpio116", "gpio117",
+ "gpio118", "gpio119", "gpio120", "gpio121", "gpio130", "gpio132",
+ "gpio133", "gpio134", "gpio135",
+};
+
+static const char * const qlink_groups[] = {
+ "gpio61", "gpio62",
+};
+
+static const char * const qspi0_groups[] = {
+ "gpio89", "gpio90", "gpio91", "gpio93",
+};
+
+static const char * const qspi0_clk_groups[] = {
+ "gpio92",
+};
+
+static const char * const qspi0_cs_groups[] = {
+ "gpio88", "gpio94",
+};
+
+static const char * const qspi1_groups[] = {
+ "gpio56", "gpio57", "gpio161", "gpio162",
+};
+
+static const char * const qspi1_clk_groups[] = {
+ "gpio163",
+};
+
+static const char * const qspi1_cs_groups[] = {
+ "gpio55", "gpio164",
+};
+
+static const char * const qua_mi2s_groups[] = {
+ "gpio136", "gpio137", "gpio138", "gpio139", "gpio140", "gpio141",
+ "gpio142",
+};
+
+static const char * const qup0_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3",
+};
+
+static const char * const qup10_groups[] = {
+ "gpio9", "gpio10", "gpio11", "gpio12",
+};
+
+static const char * const qup11_groups[] = {
+ "gpio92", "gpio93", "gpio94", "gpio95",
+};
+
+static const char * const qup12_groups[] = {
+ "gpio83", "gpio84", "gpio85", "gpio86",
+};
+
+static const char * const qup13_groups[] = {
+ "gpio43", "gpio44", "gpio45", "gpio46",
+};
+
+static const char * const qup14_groups[] = {
+ "gpio47", "gpio48", "gpio49", "gpio50",
+};
+
+static const char * const qup15_groups[] = {
+ "gpio27", "gpio28", "gpio29", "gpio30",
+};
+
+static const char * const qup16_groups[] = {
+ "gpio83", "gpio84", "gpio85", "gpio86",
+};
+
+static const char * const qup17_groups[] = {
+ "gpio55", "gpio56", "gpio57", "gpio58",
+};
+
+static const char * const qup18_groups[] = {
+ "gpio23", "gpio24", "gpio25", "gpio26",
+};
+
+static const char * const qup19_groups[] = {
+ "gpio181", "gpio182", "gpio183", "gpio184",
+};
+
+static const char * const qup1_groups[] = {
+ "gpio114", "gpio115", "gpio116", "gpio117",
+};
+
+static const char * const qup2_groups[] = {
+ "gpio126", "gpio127", "gpio128", "gpio129",
+};
+
+static const char * const qup3_groups[] = {
+ "gpio144", "gpio145", "gpio146", "gpio147",
+};
+
+static const char * const qup4_groups[] = {
+ "gpio51", "gpio52", "gpio53", "gpio54",
+};
+
+static const char * const qup5_groups[] = {
+ "gpio119", "gpio120", "gpio121", "gpio122",
+};
+
+static const char * const qup6_groups[] = {
+ "gpio4", "gpio5", "gpio6", "gpio7",
+};
+
+static const char * const qup7_groups[] = {
+ "gpio98", "gpio99", "gpio100", "gpio101",
+};
+
+static const char * const qup8_groups[] = {
+ "gpio88", "gpio89", "gpio90", "gpio91",
+};
+
+static const char * const qup9_groups[] = {
+ "gpio39", "gpio40", "gpio41", "gpio42",
+};
+
+static const char * const qup_l4_groups[] = {
+ "gpio35", "gpio59", "gpio60", "gpio95",
+};
+
+static const char * const qup_l5_groups[] = {
+ "gpio7", "gpio33", "gpio36", "gpio96",
+};
+
+static const char * const qup_l6_groups[] = {
+ "gpio6", "gpio34", "gpio37", "gpio97",
+};
+
+static const char * const rgmii_groups[] = {
+ "gpio4", "gpio5", "gpio6", "gpio7", "gpio59", "gpio114", "gpio115",
+ "gpio116", "gpio117", "gpio118", "gpio119", "gpio120", "gpio121",
+ "gpio122",
+};
+
+static const char * const sd_write_groups[] = {
+ "gpio97",
+};
+
+static const char * const sdc4_groups[] = {
+ "gpio91", "gpio93", "gpio94", "gpio95",
+};
+
+static const char * const sdc4_clk_groups[] = {
+ "gpio92",
+};
+
+static const char * const sdc4_cmd_groups[] = {
+ "gpio90",
+};
+
+static const char * const sec_mi2s_groups[] = {
+ "gpio126", "gpio127", "gpio128", "gpio129", "gpio130",
+};
+
+static const char * const sp_cmu_groups[] = {
+ "gpio162",
+};
+
+static const char * const spkr_i2s_groups[] = {
+ "gpio148", "gpio149", "gpio150", "gpio151", "gpio152",
+};
+
+static const char * const ter_mi2s_groups[] = {
+ "gpio131", "gpio132", "gpio133", "gpio134", "gpio135",
+};
+
+static const char * const tgu_groups[] = {
+ "gpio89", "gpio90", "gpio91", "gpio88", "gpio74", "gpio77", "gpio76",
+ "gpio75",
+};
+
+static const char * const tsense_pwm1_groups[] = {
+ "gpio150",
+};
+
+static const char * const tsense_pwm2_groups[] = {
+ "gpio150",
+};
+
+static const char * const tsif1_groups[] = {
+ "gpio88", "gpio89", "gpio90", "gpio91", "gpio97",
+};
+
+static const char * const tsif2_groups[] = {
+ "gpio92", "gpio93", "gpio94", "gpio95", "gpio96",
+};
+
+static const char * const uim1_groups[] = {
+ "gpio109", "gpio110", "gpio111", "gpio112",
+};
+
+static const char * const uim2_groups[] = {
+ "gpio105", "gpio106", "gpio107", "gpio108",
+};
+
+static const char * const uim_batt_groups[] = {
+ "gpio113",
+};
+
+static const char * const usb0_phy_groups[] = {
+ "gpio38",
+};
+
+static const char * const usb1_phy_groups[] = {
+ "gpio58",
+};
+
+static const char * const usb2phy_ac_groups[] = {
+ "gpio47", "gpio48", "gpio113", "gpio123",
+};
+
+static const char * const vfr_1_groups[] = {
+ "gpio91",
+};
+
+static const char * const vsense_trigger_groups[] = {
+ "gpio62",
+};
+
+static const char * const wlan1_adc_groups[] = {
+ "gpio64", "gpio63",
+};
+
+static const char * const wlan2_adc_groups[] = {
+ "gpio68", "gpio65",
+};
+
+static const char * const wmss_reset_groups[] = {
+ "gpio63",
+};
+
+static const struct msm_function sc8180x_functions[] = {
+ FUNCTION(adsp_ext),
+ FUNCTION(agera_pll),
+ FUNCTION(aoss_cti),
+ FUNCTION(atest_char),
+ FUNCTION(atest_tsens),
+ FUNCTION(atest_tsens2),
+ FUNCTION(atest_usb0),
+ FUNCTION(atest_usb1),
+ FUNCTION(atest_usb2),
+ FUNCTION(atest_usb3),
+ FUNCTION(atest_usb4),
+ FUNCTION(audio_ref),
+ FUNCTION(btfm_slimbus),
+ FUNCTION(cam_mclk),
+ FUNCTION(cci_async),
+ FUNCTION(cci_i2c),
+ FUNCTION(cci_timer0),
+ FUNCTION(cci_timer1),
+ FUNCTION(cci_timer2),
+ FUNCTION(cci_timer3),
+ FUNCTION(cci_timer4),
+ FUNCTION(cci_timer5),
+ FUNCTION(cci_timer6),
+ FUNCTION(cci_timer7),
+ FUNCTION(cci_timer8),
+ FUNCTION(cci_timer9),
+ FUNCTION(cri_trng),
+ FUNCTION(dbg_out),
+ FUNCTION(ddr_bist),
+ FUNCTION(ddr_pxi),
+ FUNCTION(debug_hot),
+ FUNCTION(dp_hot),
+ FUNCTION(edp_hot),
+ FUNCTION(edp_lcd),
+ FUNCTION(emac_phy),
+ FUNCTION(emac_pps),
+ FUNCTION(gcc_gp1),
+ FUNCTION(gcc_gp2),
+ FUNCTION(gcc_gp3),
+ FUNCTION(gcc_gp4),
+ FUNCTION(gcc_gp5),
+ FUNCTION(gpio),
+ FUNCTION(gps),
+ FUNCTION(grfc),
+ FUNCTION(hs1_mi2s),
+ FUNCTION(hs2_mi2s),
+ FUNCTION(hs3_mi2s),
+ FUNCTION(jitter_bist),
+ FUNCTION(lpass_slimbus),
+ FUNCTION(m_voc),
+ FUNCTION(mdp_vsync),
+ FUNCTION(mdp_vsync0),
+ FUNCTION(mdp_vsync1),
+ FUNCTION(mdp_vsync2),
+ FUNCTION(mdp_vsync3),
+ FUNCTION(mdp_vsync4),
+ FUNCTION(mdp_vsync5),
+ FUNCTION(mss_lte),
+ FUNCTION(nav_pps),
+ FUNCTION(pa_indicator),
+ FUNCTION(pci_e0),
+ FUNCTION(pci_e1),
+ FUNCTION(pci_e2),
+ FUNCTION(pci_e3),
+ FUNCTION(phase_flag),
+ FUNCTION(pll_bist),
+ FUNCTION(pll_bypassnl),
+ FUNCTION(pll_reset),
+ FUNCTION(pri_mi2s),
+ FUNCTION(pri_mi2s_ws),
+ FUNCTION(prng_rosc),
+ FUNCTION(qdss_cti),
+ FUNCTION(qdss_gpio),
+ FUNCTION(qlink),
+ FUNCTION(qspi0),
+ FUNCTION(qspi0_clk),
+ FUNCTION(qspi0_cs),
+ FUNCTION(qspi1),
+ FUNCTION(qspi1_clk),
+ FUNCTION(qspi1_cs),
+ FUNCTION(qua_mi2s),
+ FUNCTION(qup0),
+ FUNCTION(qup1),
+ FUNCTION(qup2),
+ FUNCTION(qup3),
+ FUNCTION(qup4),
+ FUNCTION(qup5),
+ FUNCTION(qup6),
+ FUNCTION(qup7),
+ FUNCTION(qup8),
+ FUNCTION(qup9),
+ FUNCTION(qup10),
+ FUNCTION(qup11),
+ FUNCTION(qup12),
+ FUNCTION(qup13),
+ FUNCTION(qup14),
+ FUNCTION(qup15),
+ FUNCTION(qup16),
+ FUNCTION(qup17),
+ FUNCTION(qup18),
+ FUNCTION(qup19),
+ FUNCTION(qup_l4),
+ FUNCTION(qup_l5),
+ FUNCTION(qup_l6),
+ FUNCTION(rgmii),
+ FUNCTION(sd_write),
+ FUNCTION(sdc4),
+ FUNCTION(sdc4_clk),
+ FUNCTION(sdc4_cmd),
+ FUNCTION(sec_mi2s),
+ FUNCTION(sp_cmu),
+ FUNCTION(spkr_i2s),
+ FUNCTION(ter_mi2s),
+ FUNCTION(tgu),
+ FUNCTION(tsense_pwm1),
+ FUNCTION(tsense_pwm2),
+ FUNCTION(tsif1),
+ FUNCTION(tsif2),
+ FUNCTION(uim1),
+ FUNCTION(uim2),
+ FUNCTION(uim_batt),
+ FUNCTION(usb0_phy),
+ FUNCTION(usb1_phy),
+ FUNCTION(usb2phy_ac),
+ FUNCTION(vfr_1),
+ FUNCTION(vsense_trigger),
+ FUNCTION(wlan1_adc),
+ FUNCTION(wlan2_adc),
+ FUNCTION(wmss_reset),
+};
+
+/* Every pin is maintained as a single group, and missing or non-existing pin
+ * would be maintained as dummy group to synchronize pin group index with
+ * pin descriptor registered with pinctrl core.
+ * Clients would not be able to request these dummy pin groups.
+ */
+static const struct msm_pingroup sc8180x_groups[] = {
+ [0] = PINGROUP(0, WEST, qup0, cci_i2c, _, _, _, _, _, _, _),
+ [1] = PINGROUP(1, WEST, qup0, cci_i2c, _, _, _, _, _, _, _),
+ [2] = PINGROUP(2, WEST, qup0, cci_i2c, _, _, _, _, _, _, _),
+ [3] = PINGROUP(3, WEST, qup0, cci_i2c, _, _, _, _, _, _, _),
+ [4] = PINGROUP(4, WEST, qup6, rgmii, _, phase_flag, _, _, _, _, _),
+ [5] = PINGROUP(5, WEST, qup6, rgmii, _, phase_flag, _, _, _, _, _),
+ [6] = PINGROUP(6, WEST, qup6, rgmii, qup_l6, _, phase_flag, _, _, _, _),
+ [7] = PINGROUP(7, WEST, qup6, debug_hot, rgmii, qup_l5, _, phase_flag, _, _, _),
+ [8] = PINGROUP(8, EAST, mdp_vsync, _, _, _, _, _, _, _, _),
+ [9] = PINGROUP(9, EAST, mdp_vsync, qup10, _, _, _, _, _, _, _),
+ [10] = PINGROUP(10, EAST, edp_hot, m_voc, mdp_vsync, qup10, _, _, _, _, _),
+ [11] = PINGROUP(11, EAST, edp_lcd, qup10, _, _, _, _, _, _, _),
+ [12] = PINGROUP(12, EAST, qup10, _, _, _, _, _, _, _, _),
+ [13] = PINGROUP(13, EAST, cam_mclk, qdss_gpio, _, _, _, _, _, _, _),
+ [14] = PINGROUP(14, EAST, cam_mclk, qdss_gpio, _, _, _, _, _, _, _),
+ [15] = PINGROUP(15, EAST, cam_mclk, qdss_gpio, _, _, _, _, _, _, _),
+ [16] = PINGROUP(16, EAST, cam_mclk, qdss_gpio, _, _, _, _, _, _, _),
+ [17] = PINGROUP(17, EAST, cci_i2c, qdss_gpio, _, _, _, _, _, _, _),
+ [18] = PINGROUP(18, EAST, cci_i2c, qdss_gpio, _, _, _, _, _, _, _),
+ [19] = PINGROUP(19, EAST, cci_i2c, qdss_gpio, _, _, _, _, _, _, _),
+ [20] = PINGROUP(20, EAST, cci_i2c, qdss_gpio, _, _, _, _, _, _, _),
+ [21] = PINGROUP(21, EAST, cci_timer0, gcc_gp2, qdss_gpio, _, _, _, _, _, _),
+ [22] = PINGROUP(22, EAST, cci_timer1, gcc_gp3, qdss_gpio, _, _, _, _, _, _),
+ [23] = PINGROUP(23, EAST, cci_timer2, qup18, qdss_gpio, _, _, _, _, _, _),
+ [24] = PINGROUP(24, EAST, cci_timer3, cci_async, qup18, qdss_gpio, _, _, _, _, _),
+ [25] = PINGROUP(25, EAST, cam_mclk, cci_async, qup18, qdss_gpio, _, _, _, _, _),
+ [26] = PINGROUP(26, EAST, cci_async, qup18, qdss_gpio, _, _, _, _, _, _),
+ [27] = PINGROUP(27, EAST, qup15, _, qdss_gpio, _, _, _, _, _, _),
+ [28] = PINGROUP(28, EAST, qup15, qdss_gpio, _, _, _, _, _, _, _),
+ [29] = PINGROUP(29, EAST, qup15, qdss_gpio, _, _, _, _, _, _, _),
+ [30] = PINGROUP(30, EAST, qup15, qdss_gpio, _, _, _, _, _, _, _),
+ [31] = PINGROUP(31, EAST, cci_i2c, _, _, _, _, _, _, _, _),
+ [32] = PINGROUP(32, EAST, cci_i2c, _, _, _, _, _, _, _, _),
+ [33] = PINGROUP(33, EAST, cci_i2c, qup_l5, _, phase_flag, _, _, _, _, _),
+ [34] = PINGROUP(34, EAST, cci_i2c, qup_l6, dbg_out, atest_usb2, _, _, _, _, _),
+ [35] = PINGROUP(35, SOUTH, pci_e0, qup_l4, _, _, _, _, _, _, _),
+ [36] = PINGROUP(36, SOUTH, pci_e0, qup_l5, _, _, _, _, _, _, _),
+ [37] = PINGROUP(37, SOUTH, qup_l6, agera_pll, _, _, _, _, _, _, _),
+ [38] = PINGROUP(38, SOUTH, usb0_phy, _, _, _, _, _, _, _, _),
+ [39] = PINGROUP(39, EAST, qup9, cci_i2c, qdss_gpio, _, _, _, _, _, _),
+ [40] = PINGROUP(40, EAST, qup9, cci_i2c, qdss_gpio, _, _, _, _, _, _),
+ [41] = PINGROUP(41, EAST, qup9, cci_i2c, qdss_gpio, _, _, _, _, _, _),
+ [42] = PINGROUP(42, EAST, qup9, cci_i2c, qdss_gpio, _, _, _, _, _, _),
+ [43] = PINGROUP(43, EAST, qup13, _, _, _, _, _, _, _, _),
+ [44] = PINGROUP(44, EAST, qup13, _, _, _, _, _, _, _, _),
+ [45] = PINGROUP(45, EAST, qup13, _, _, _, _, _, _, _, _),
+ [46] = PINGROUP(46, EAST, qup13, _, _, _, _, _, _, _, _),
+ [47] = PINGROUP(47, EAST, qup14, usb2phy_ac, _, _, _, _, _, _, _),
+ [48] = PINGROUP(48, EAST, qup14, usb2phy_ac, _, _, _, _, _, _, _),
+ [49] = PINGROUP(49, EAST, qup14, qdss_cti, _, _, _, _, _, _, _),
+ [50] = PINGROUP(50, EAST, qup14, qdss_cti, _, _, _, _, _, _, _),
+ [51] = PINGROUP(51, WEST, qup4, _, _, _, _, _, _, _, _),
+ [52] = PINGROUP(52, WEST, qup4, _, _, _, _, _, _, _, _),
+ [53] = PINGROUP(53, WEST, qup4, _, phase_flag, _, _, _, _, _, _),
+ [54] = PINGROUP(54, WEST, qup4, _, _, phase_flag, _, _, _, _, _),
+ [55] = PINGROUP(55, WEST, qup17, qspi1_cs, _, _, _, _, _, _, _),
+ [56] = PINGROUP(56, WEST, qup17, qspi1, _, _, _, _, _, _, _),
+ [57] = PINGROUP(57, WEST, qup17, qspi1, _, _, _, _, _, _, _),
+ [58] = PINGROUP(58, WEST, usb1_phy, qup17, _, _, _, _, _, _, _),
+ [59] = PINGROUP(59, WEST, rgmii, qup_l4, _, _, _, _, _, _, _),
+ [60] = PINGROUP(60, EAST, gps, nav_pps, nav_pps, qup_l4, mdp_vsync, atest_usb1, ddr_pxi, _, _),
+ [61] = PINGROUP(61, EAST, qlink, _, _, _, _, _, _, _, _),
+ [62] = PINGROUP(62, EAST, qlink, atest_tsens2, atest_usb1, ddr_pxi, vsense_trigger, _, _, _, _),
+ [63] = PINGROUP(63, EAST, wmss_reset, _, atest_usb1, ddr_pxi, wlan1_adc, _, _, _, _),
+ [64] = PINGROUP(64, EAST, grfc, _, atest_usb1, ddr_pxi, wlan1_adc, _, _, _, _),
+ [65] = PINGROUP(65, EAST, grfc, atest_usb1, ddr_pxi, wlan2_adc, _, _, _, _, _),
+ [66] = PINGROUP(66, EAST, grfc, _, _, _, _, _, _, _, _),
+ [67] = PINGROUP(67, EAST, grfc, _, _, _, _, _, _, _, _),
+ [68] = PINGROUP(68, EAST, grfc, pa_indicator, atest_usb3, ddr_pxi, wlan2_adc, _, _, _, _),
+ [69] = PINGROUP(69, EAST, mss_lte, _, _, _, _, _, _, _, _),
+ [70] = PINGROUP(70, EAST, mss_lte, _, _, _, _, _, _, _, _),
+ [71] = PINGROUP(71, EAST, _, grfc, atest_usb3, ddr_pxi, _, _, _, _, _),
+ [72] = PINGROUP(72, EAST, _, grfc, atest_usb3, ddr_pxi, _, _, _, _, _),
+ [73] = PINGROUP(73, EAST, _, grfc, atest_usb3, ddr_pxi, _, _, _, _, _),
+ [74] = PINGROUP(74, EAST, _, grfc, tgu, atest_usb3, ddr_pxi, _, _, _, _),
+ [75] = PINGROUP(75, EAST, _, grfc, tgu, atest_usb4, ddr_pxi, _, _, _, _),
+ [76] = PINGROUP(76, EAST, _, grfc, gps, nav_pps, nav_pps, tgu, atest_usb4, ddr_pxi, _),
+ [77] = PINGROUP(77, EAST, _, grfc, gps, nav_pps, nav_pps, tgu, atest_usb4, ddr_pxi, _),
+ [78] = PINGROUP(78, EAST, _, grfc, _, atest_usb4, ddr_pxi, _, _, _, _),
+ [79] = PINGROUP(79, EAST, _, grfc, _, _, _, _, _, _, _),
+ [80] = PINGROUP(80, EAST, _, grfc, _, _, _, _, _, _, _),
+ [81] = PINGROUP(81, EAST, _, grfc, gps, nav_pps, nav_pps, qdss_cti, _, emac_pps, _),
+ [82] = PINGROUP(82, EAST, _, grfc, gps, nav_pps, nav_pps, mdp_vsync, qdss_cti, _, _),
+ [83] = PINGROUP(83, EAST, qup12, qup16, _, _, _, _, _, _, _),
+ [84] = PINGROUP(84, EAST, qup12, qup16, _, _, _, _, _, _, _),
+ [85] = PINGROUP(85, EAST, qup12, qup16, _, _, _, _, _, _, _),
+ [86] = PINGROUP(86, EAST, qup12, qup16, _, _, _, _, _, _, _),
+ [87] = PINGROUP(87, SOUTH, _, _, _, _, _, _, _, _, _),
+ [88] = PINGROUP(88, EAST, tsif1, qup8, qspi0_cs, tgu, atest_usb4, ddr_pxi, _, _, _),
+ [89] = PINGROUP(89, EAST, tsif1, qup8, qspi0, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5),
+ [90] = PINGROUP(90, EAST, tsif1, qup8, qspi0, sdc4_cmd, tgu, qdss_cti, atest_usb0, ddr_pxi, _),
+ [91] = PINGROUP(91, EAST, tsif1, qup8, qspi0, sdc4, vfr_1, tgu, atest_usb0, _, _),
+ [92] = PINGROUP(92, EAST, tsif2, qup11, qspi0_clk, sdc4_clk, qdss_gpio, atest_usb0, _, _, _),
+ [93] = PINGROUP(93, EAST, tsif2, qup11, qspi0, sdc4, atest_tsens, atest_usb0, _, _, _),
+ [94] = PINGROUP(94, EAST, tsif2, qup11, qspi0_cs, sdc4, _, atest_usb0, _, _, _),
+ [95] = PINGROUP(95, EAST, tsif2, qup11, sdc4, qup_l4, atest_usb2, _, _, _, _),
+ [96] = PINGROUP(96, WEST, tsif2, qup_l5, _, _, _, _, _, _, _),
+ [97] = PINGROUP(97, WEST, sd_write, tsif1, qup_l6, _, _, _, _, _, _),
+ [98] = PINGROUP(98, WEST, qup7, ddr_bist, _, _, _, _, _, _, _),
+ [99] = PINGROUP(99, WEST, qup7, ddr_bist, _, _, _, _, _, _, _),
+ [100] = PINGROUP(100, WEST, qup7, pll_bypassnl, _, _, _, _, _, _, _),
+ [101] = PINGROUP(101, WEST, qup7, pll_reset, _, _, _, _, _, _, _),
+ [102] = PINGROUP(102, SOUTH, pci_e1, _, phase_flag, atest_usb2, _, _, _, _, _),
+ [103] = PINGROUP(103, SOUTH, pci_e1, _, _, _, _, _, _, _, _),
+ [104] = PINGROUP(104, SOUTH, _, _, _, _, _, _, _, _, _),
+ [105] = PINGROUP(105, WEST, uim2, _, _, _, _, _, _, _, _),
+ [106] = PINGROUP(106, WEST, uim2, _, _, _, _, _, _, _, _),
+ [107] = PINGROUP(107, WEST, uim2, _, _, _, _, _, _, _, _),
+ [108] = PINGROUP(108, WEST, uim2, _, _, _, _, _, _, _, _),
+ [109] = PINGROUP(109, WEST, uim1, _, _, _, _, _, _, _, _),
+ [110] = PINGROUP(110, WEST, uim1, _, _, _, _, _, _, _, _),
+ [111] = PINGROUP(111, WEST, uim1, _, _, _, _, _, _, _, _),
+ [112] = PINGROUP(112, WEST, uim1, _, _, _, _, _, _, _, _),
+ [113] = PINGROUP(113, WEST, uim_batt, usb2phy_ac, aoss_cti, _, _, _, _, _, _),
+ [114] = PINGROUP(114, WEST, qup1, rgmii, _, qdss_gpio, _, _, _, _, _),
+ [115] = PINGROUP(115, WEST, qup1, rgmii, adsp_ext, _, qdss_gpio, _, _, _, _),
+ [116] = PINGROUP(116, WEST, qup1, rgmii, _, qdss_gpio, _, _, _, _, _),
+ [117] = PINGROUP(117, WEST, qup1, rgmii, _, qdss_gpio, _, _, _, _, _),
+ [118] = PINGROUP(118, WEST, rgmii, _, qdss_gpio, _, _, _, _, _, _),
+ [119] = PINGROUP(119, WEST, qup5, rgmii, _, qdss_gpio, _, _, _, _, _),
+ [120] = PINGROUP(120, WEST, qup5, rgmii, _, phase_flag, qdss_gpio, _, _, _, _),
+ [121] = PINGROUP(121, WEST, qup5, rgmii, _, phase_flag, qdss_gpio, atest_usb2, _, _, _),
+ [122] = PINGROUP(122, WEST, qup5, rgmii, _, phase_flag, atest_usb2, _, _, _, _),
+ [123] = PINGROUP(123, SOUTH, usb2phy_ac, _, phase_flag, _, _, _, _, _, _),
+ [124] = PINGROUP(124, SOUTH, emac_phy, _, _, _, _, _, _, _, _),
+ [125] = PINGROUP(125, WEST, hs3_mi2s, _, phase_flag, _, _, _, _, _, _),
+ [126] = PINGROUP(126, WEST, sec_mi2s, qup2, _, _, _, _, _, _, _),
+ [127] = PINGROUP(127, WEST, sec_mi2s, qup2, _, _, _, _, _, _, _),
+ [128] = PINGROUP(128, WEST, sec_mi2s, qup2, _, _, _, _, _, _, _),
+ [129] = PINGROUP(129, WEST, sec_mi2s, qup2, jitter_bist, _, _, _, _, _, _),
+ [130] = PINGROUP(130, WEST, sec_mi2s, pll_bist, _, qdss_gpio, _, _, _, _, _),
+ [131] = PINGROUP(131, WEST, ter_mi2s, gcc_gp1, _, _, _, _, _, _, _),
+ [132] = PINGROUP(132, WEST, ter_mi2s, _, qdss_gpio, _, _, _, _, _, _),
+ [133] = PINGROUP(133, WEST, ter_mi2s, _, qdss_gpio, atest_char, _, _, _, _, _),
+ [134] = PINGROUP(134, WEST, ter_mi2s, _, qdss_gpio, atest_char, _, _, _, _, _),
+ [135] = PINGROUP(135, WEST, ter_mi2s, _, qdss_gpio, atest_char, _, _, _, _, _),
+ [136] = PINGROUP(136, WEST, qua_mi2s, gcc_gp1, _, _, _, _, _, _, _),
+ [137] = PINGROUP(137, WEST, qua_mi2s, gcc_gp2, _, _, _, _, _, _, _),
+ [138] = PINGROUP(138, WEST, qua_mi2s, gcc_gp3, _, _, _, _, _, _, _),
+ [139] = PINGROUP(139, WEST, qua_mi2s, gcc_gp4, _, _, _, _, _, _, _),
+ [140] = PINGROUP(140, WEST, qua_mi2s, gcc_gp5, _, atest_char, _, _, _, _, _),
+ [141] = PINGROUP(141, WEST, qua_mi2s, qdss_cti, _, _, _, _, _, _, _),
+ [142] = PINGROUP(142, WEST, qua_mi2s, _, _, qdss_cti, atest_char, _, _, _, _),
+ [143] = PINGROUP(143, WEST, pri_mi2s, _, _, _, _, _, _, _, _),
+ [144] = PINGROUP(144, WEST, pri_mi2s, qup3, _, _, _, _, _, _, _),
+ [145] = PINGROUP(145, WEST, pri_mi2s_ws, qup3, ddr_bist, _, _, _, _, _, _),
+ [146] = PINGROUP(146, WEST, pri_mi2s, qup3, ddr_bist, _, _, _, _, _, _),
+ [147] = PINGROUP(147, WEST, pri_mi2s, qup3, _, _, _, _, _, _, _),
+ [148] = PINGROUP(148, WEST, spkr_i2s, audio_ref, _, phase_flag, _, _, _, _, _),
+ [149] = PINGROUP(149, WEST, lpass_slimbus, spkr_i2s, _, phase_flag, _, _, _, _, _),
+ [150] = PINGROUP(150, WEST, lpass_slimbus, spkr_i2s, _, phase_flag, tsense_pwm1, tsense_pwm2, _, _, _),
+ [151] = PINGROUP(151, WEST, lpass_slimbus, spkr_i2s, _, phase_flag, _, _, _, _, _),
+ [152] = PINGROUP(152, WEST, lpass_slimbus, spkr_i2s, _, phase_flag, _, _, _, _, _),
+ [153] = PINGROUP(153, WEST, btfm_slimbus, _, _, _, _, _, _, _, _),
+ [154] = PINGROUP(154, WEST, btfm_slimbus, _, _, _, _, _, _, _, _),
+ [155] = PINGROUP(155, WEST, hs1_mi2s, _, phase_flag, _, _, _, _, _, _),
+ [156] = PINGROUP(156, WEST, hs1_mi2s, _, phase_flag, _, _, _, _, _, _),
+ [157] = PINGROUP(157, WEST, hs1_mi2s, _, phase_flag, _, _, _, _, _, _),
+ [158] = PINGROUP(158, WEST, hs1_mi2s, _, phase_flag, _, _, _, _, _, _),
+ [159] = PINGROUP(159, WEST, hs1_mi2s, cri_trng, _, phase_flag, _, _, _, _, _),
+ [160] = PINGROUP(160, WEST, hs2_mi2s, cri_trng, _, phase_flag, _, _, _, _, _),
+ [161] = PINGROUP(161, WEST, hs2_mi2s, qspi1, cri_trng, _, phase_flag, _, _, _, _),
+ [162] = PINGROUP(162, WEST, hs2_mi2s, qspi1, sp_cmu, _, phase_flag, _, _, _, _),
+ [163] = PINGROUP(163, WEST, hs2_mi2s, qspi1_clk, prng_rosc, _, phase_flag, _, _, _, _),
+ [164] = PINGROUP(164, WEST, hs2_mi2s, qspi1_cs, _, phase_flag, _, _, _, _, _),
+ [165] = PINGROUP(165, WEST, hs3_mi2s, _, phase_flag, _, _, _, _, _, _),
+ [166] = PINGROUP(166, WEST, hs3_mi2s, _, phase_flag, _, _, _, _, _, _),
+ [167] = PINGROUP(167, WEST, hs3_mi2s, _, phase_flag, _, _, _, _, _, _),
+ [168] = PINGROUP(168, WEST, hs3_mi2s, _, phase_flag, _, _, _, _, _, _),
+ [169] = PINGROUP(169, SOUTH, _, _, _, _, _, _, _, _, _),
+ [170] = PINGROUP(170, SOUTH, _, _, _, _, _, _, _, _, _),
+ [171] = PINGROUP(171, SOUTH, _, _, _, _, _, _, _, _, _),
+ [172] = PINGROUP(172, SOUTH, _, _, _, _, _, _, _, _, _),
+ [173] = PINGROUP(173, SOUTH, _, _, _, _, _, _, _, _, _),
+ [174] = PINGROUP(174, SOUTH, _, _, _, _, _, _, _, _, _),
+ [175] = PINGROUP(175, SOUTH, pci_e2, _, _, _, _, _, _, _, _),
+ [176] = PINGROUP(176, SOUTH, pci_e2, cci_async, _, _, _, _, _, _, _),
+ [177] = PINGROUP_OFFSET(177, SOUTH, 0x1e000, _, _, _, _, _, _, _, _, _),
+ [178] = PINGROUP_OFFSET(178, SOUTH, 0x1e000, pci_e3, cci_timer4, _, _, _, _, _, _, _),
+ [179] = PINGROUP_OFFSET(179, SOUTH, 0x1e000, pci_e3, cam_mclk, _, _, _, _, _, _, _),
+ [180] = PINGROUP_OFFSET(180, SOUTH, 0x1e000, cam_mclk, _, _, _, _, _, _, _, _),
+ [181] = PINGROUP_OFFSET(181, SOUTH, 0x1e000, qup19, cam_mclk, _, _, _, _, _, _, _),
+ [182] = PINGROUP_OFFSET(182, SOUTH, 0x1e000, qup19, cci_timer5, gcc_gp4, _, _, _, _, _, _),
+ [183] = PINGROUP_OFFSET(183, SOUTH, 0x1e000, qup19, cci_timer6, gcc_gp5, _, _, _, _, _, _),
+ [184] = PINGROUP_OFFSET(184, SOUTH, 0x1e000, qup19, cci_timer7, _, _, _, _, _, _, _),
+ [185] = PINGROUP_OFFSET(185, SOUTH, 0x1e000, cci_timer8, cci_async, _, _, _, _, _, _, _),
+ [186] = PINGROUP_OFFSET(186, SOUTH, 0x1e000, cci_timer9, cci_async, _, _, _, _, _, _, _),
+ [187] = PINGROUP_OFFSET(187, SOUTH, 0x1e000, _, _, _, _, _, _, _, _, _),
+ [188] = PINGROUP_OFFSET(188, SOUTH, 0x1e000, _, _, _, _, _, _, _, _, _),
+ [189] = PINGROUP_OFFSET(189, SOUTH, 0x1e000, dp_hot, _, _, _, _, _, _, _, _),
+ [190] = UFS_RESET(ufs_reset),
+ [191] = SDC_QDSD_PINGROUP(sdc2_clk, 0x4b2000, 14, 6),
+ [192] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x4b2000, 11, 3),
+ [193] = SDC_QDSD_PINGROUP(sdc2_data, 0x4b2000, 9, 0),
+};
+
+static const struct msm_gpio_wakeirq_map sc8180x_pdc_map[] = {
+ { 3, 31 }, { 5, 32 }, { 8, 33 }, { 9, 34 }, { 10, 100 }, { 12, 104 },
+ { 24, 37 }, { 26, 38 }, { 27, 41 }, { 28, 42 }, { 30, 39 }, { 36, 43 },
+ { 37, 43 }, { 38, 45 }, { 39, 118 }, { 39, 125 }, { 41, 47 },
+ { 42, 48 }, { 46, 50 }, { 47, 49 }, { 48, 51 }, { 49, 53 }, { 50, 52 },
+ { 51, 116 }, { 51, 123 }, { 53, 54 }, { 54, 55 }, { 55, 56 },
+ { 56, 57 }, { 58, 58 }, { 60, 60 }, { 68, 62 }, { 70, 63 }, { 76, 86 },
+ { 77, 36 }, { 81, 64 }, { 83, 65 }, { 86, 67 }, { 87, 84 }, { 88, 117 },
+ { 88, 124 }, { 90, 69 }, { 91, 70 }, { 93, 75 }, { 95, 72 }, { 97, 74 },
+ { 101, 76 }, { 103, 77 }, { 104, 78 }, { 114, 82 }, { 117, 85 },
+ { 118, 101 }, { 119, 87 }, { 120, 88 }, { 121, 89 }, { 122, 90 },
+ { 123, 91 }, { 124, 92 }, { 125, 93 }, { 129, 94 }, { 132, 105 },
+ { 133, 35 }, { 134, 36 }, { 136, 97 }, { 142, 103 }, { 144, 115 },
+ { 144, 122 }, { 147, 106 }, { 150, 107 }, { 152, 108 }, { 153, 109 },
+ { 177, 111 }, { 180, 112 }, { 184, 113 }, { 189, 114 }
+};
+
+static struct msm_pinctrl_soc_data sc8180x_pinctrl = {
+ .tiles = sc8180x_tiles,
+ .ntiles = ARRAY_SIZE(sc8180x_tiles),
+ .pins = sc8180x_pins,
+ .npins = ARRAY_SIZE(sc8180x_pins),
+ .functions = sc8180x_functions,
+ .nfunctions = ARRAY_SIZE(sc8180x_functions),
+ .groups = sc8180x_groups,
+ .ngroups = ARRAY_SIZE(sc8180x_groups),
+ .ngpios = 191,
+ .wakeirq_map = sc8180x_pdc_map,
+ .nwakeirq_map = ARRAY_SIZE(sc8180x_pdc_map),
+};
+
+static int sc8180x_pinctrl_probe(struct platform_device *pdev)
+{
+ return msm_pinctrl_probe(pdev, &sc8180x_pinctrl);
+}
+
+static const struct of_device_id sc8180x_pinctrl_of_match[] = {
+ { .compatible = "qcom,sc8180x-tlmm", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, sc8180x_pinctrl_of_match);
+
+static struct platform_driver sc8180x_pinctrl_driver = {
+ .driver = {
+ .name = "sc8180x-pinctrl",
+ .of_match_table = sc8180x_pinctrl_of_match,
+ },
+ .probe = sc8180x_pinctrl_probe,
+ .remove = msm_pinctrl_remove,
+};
+
+static int __init sc8180x_pinctrl_init(void)
+{
+ return platform_driver_register(&sc8180x_pinctrl_driver);
+}
+arch_initcall(sc8180x_pinctrl_init);
+
+static void __exit sc8180x_pinctrl_exit(void)
+{
+ platform_driver_unregister(&sc8180x_pinctrl_driver);
+}
+module_exit(sc8180x_pinctrl_exit);
+
+MODULE_DESCRIPTION("QTI SC8180x pinctrl driver");
+MODULE_LICENSE("GPL v2");
--
2.29.2
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] dt-bindings: pinctrl: qcom: Define common TLMM binding
2021-01-20 22:21 ` [PATCH 1/3] dt-bindings: pinctrl: qcom: Define common TLMM binding Bjorn Andersson
@ 2021-01-21 13:20 ` Linus Walleij
2021-01-21 17:06 ` Vinod Koul
2021-01-21 17:18 ` Bjorn Andersson
0 siblings, 2 replies; 7+ messages in thread
From: Linus Walleij @ 2021-01-21 13:20 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andy Gross, Rob Herring, MSM, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel
On Wed, Jan 20, 2021 at 11:21 PM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
> Several properties are shared between all TLMM bindings. By providing a
> common binding to define these properties each platform's binding can be
> reduced to just listing which of these properties should be checked for
> - or further specified.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Overall it looks good, just cutting some slack for reviewers (especially
DT people) before applying.
> +description:
> + This defines the common properties used to describe all Qualcomm TLMM
> + bindings and pinconf/pinmux states for these.
I vaguely recall asking you in the past what the acronym TLMM actually
means. This would be a good place to expand the acronym so people
know what these four letters actually represent.
(There, I finally gave you an official reason to go and poke Qualcomm
hardware engineers about this. ;)
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] dt-bindings: pinctrl: qcom: Define common TLMM binding
2021-01-21 13:20 ` Linus Walleij
@ 2021-01-21 17:06 ` Vinod Koul
2021-01-21 17:18 ` Bjorn Andersson
1 sibling, 0 replies; 7+ messages in thread
From: Vinod Koul @ 2021-01-21 17:06 UTC (permalink / raw)
To: Linus Walleij
Cc: Bjorn Andersson, Andy Gross, Rob Herring, MSM,
open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel
On 21-01-21, 14:20, Linus Walleij wrote:
> On Wed, Jan 20, 2021 at 11:21 PM Bjorn Andersson
> <bjorn.andersson@linaro.org> wrote:
>
> > Several properties are shared between all TLMM bindings. By providing a
> > common binding to define these properties each platform's binding can be
> > reduced to just listing which of these properties should be checked for
> > - or further specified.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
> Overall it looks good, just cutting some slack for reviewers (especially
> DT people) before applying.
Yeah it does clean stuff up. I have rebased on SM8350 series on top of this, will post soon.
> > +description:
> > + This defines the common properties used to describe all Qualcomm TLMM
> > + bindings and pinconf/pinmux states for these.
>
> I vaguely recall asking you in the past what the acronym TLMM actually
> means. This would be a good place to expand the acronym so people
> know what these four letters actually represent.
It is Top Level Mode Multiplexer (TLMM) it is actually used in the
binding doc :)
>
> (There, I finally gave you an official reason to go and poke Qualcomm
> hardware engineers about this. ;)
>
> Yours,
> Linus Walleij
--
~Vinod
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] dt-bindings: pinctrl: qcom: Define common TLMM binding
2021-01-21 13:20 ` Linus Walleij
2021-01-21 17:06 ` Vinod Koul
@ 2021-01-21 17:18 ` Bjorn Andersson
1 sibling, 0 replies; 7+ messages in thread
From: Bjorn Andersson @ 2021-01-21 17:18 UTC (permalink / raw)
To: Linus Walleij
Cc: Andy Gross, Rob Herring, MSM, open list:GPIO SUBSYSTEM,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel
On Thu 21 Jan 07:20 CST 2021, Linus Walleij wrote:
> On Wed, Jan 20, 2021 at 11:21 PM Bjorn Andersson
> <bjorn.andersson@linaro.org> wrote:
>
> > Several properties are shared between all TLMM bindings. By providing a
> > common binding to define these properties each platform's binding can be
> > reduced to just listing which of these properties should be checked for
> > - or further specified.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> Overall it looks good, just cutting some slack for reviewers (especially
> DT people) before applying.
>
> > +description:
> > + This defines the common properties used to describe all Qualcomm TLMM
> > + bindings and pinconf/pinmux states for these.
>
> I vaguely recall asking you in the past what the acronym TLMM actually
> means. This would be a good place to expand the acronym so people
> know what these four letters actually represent.
>
As Vinod said, it's used in a few places and I agree that we should
spell it out here.
In particular I had to include "phandle" in the list of valid properties
for for the dtbs_check to pass when there are references to state nodes,
so I would like to hear from Rob about that.
Will respin this after getting his input - hopefully with his Ack ;)
> (There, I finally gave you an official reason to go and poke Qualcomm
> hardware engineers about this. ;)
>
:)
Regards,
Bjorn
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-01-21 17:27 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-20 22:21 [PATCH 0/3] pinctrl: qcom: TLMM driver for SC8180x Bjorn Andersson
2021-01-20 22:21 ` [PATCH 1/3] dt-bindings: pinctrl: qcom: Define common TLMM binding Bjorn Andersson
2021-01-21 13:20 ` Linus Walleij
2021-01-21 17:06 ` Vinod Koul
2021-01-21 17:18 ` Bjorn Andersson
2021-01-20 22:21 ` [PATCH 2/3] dt-bindings: pinctrl: qcom: Add sc8180x binding Bjorn Andersson
2021-01-20 22:21 ` [PATCH 3/3] pinctrl: qcom: Add sc8180x TLMM driver Bjorn Andersson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.