From: Jamie Heilman <jamie@audible.transient.net>
To: Takashi Iwai <tiwai@suse.de>
Cc: linux-kernel@vger.kernel.org
Subject: Re: bisected regression in v5.11-rc1 snd-usb-audio
Date: Sat, 23 Jan 2021 11:08:02 +0000 [thread overview]
Message-ID: <YAwDkhRVkrEna8pV@audible.transient.net> (raw)
In-Reply-To: <s5him7p89oe.wl-tiwai@suse.de>
[-- Attachment #1: Type: text/plain, Size: 6250 bytes --]
Takashi Iwai wrote:
> On Fri, 22 Jan 2021 11:03:48 +0100,
> Jamie Heilman wrote:
> >
> > Takashi Iwai wrote:
> > > You seem hitting a firmware bug, and it doesn't look like the only
> > > case. Interestingly, the backport of 5.11 USB-audio stuff on 5.3
> > > kernel on openSUSE Leap 15.2 caused a similar bug on Steinberg device,
> > > while it worked with 5.11-rc. So I thought this specific with the
> > > older kernel (in USB core changes or such), but my guess seems wrong,
> > > and the bug looks remaining in 5.11 for some cases.
> > >
> > > Below is the fix patch. Please give it a try.
> > >
> > >
> > > thanks,
> > >
> > > Takashi
> > >
> > > -- 8< --
> > > From: Takashi Iwai <tiwai@suse.de>
> > > Subject: [PATCH] ALSA: usb-audio: workaround for iface reset issue
> > >
> > > The recently introduced sample rate validation code seems causing a
> > > problem on some devices; namely, after performing this, the bus gets
> > > screwed and it influences even on other USB devices.
> > > As a quick workaround, perform it only for the necessary devices;
> > > currently MOTU devices are known to need the valid altset checks, so
> > > filter out other devices.
> > >
> > > Fixes: 93db51d06b32 ("ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3")
> > > Reported-by: Jamie Heilman <jamie@audible.transient.net>
> > > BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1178203
> > > Signed-off-by: Takashi Iwai <tiwai@suse.de>
> > > ---
> > > sound/usb/format.c | 11 +++++++++++
> > > 1 file changed, 11 insertions(+)
> > >
> > > diff --git a/sound/usb/format.c b/sound/usb/format.c
> > > index 9ebc5d202c87..e6ff317a6785 100644
> > > --- a/sound/usb/format.c
> > > +++ b/sound/usb/format.c
> > > @@ -466,6 +466,17 @@ static int validate_sample_rate_table_v2v3(struct snd_usb_audio *chip,
> > > unsigned int nr_rates;
> > > int i, err;
> > >
> > > + /* performing the rate verification may lead to unexpected USB bus
> > > + * behavior afterwards by some unknown reason. Do this only for the
> > > + * known devices.
> > > + */
> > > + switch (USB_ID_VENDOR(chip->usb_id)) {
> > > + case 0x07fd: /* MOTU */
> > > + break;
> > > + default:
> > > + return 0; /* don't perform the validation as default */
> > > + }
> > > +
> > > table = kcalloc(fp->nr_rates, sizeof(*table), GFP_KERNEL);
> > > if (!table)
> > > return -ENOMEM;
> >
> > Well, with this patch, while I can get it to seemingly initialize
> > without errors by replugging, I can't actually get it to work. Jack
> > says:
> >
> > Starting jack server...
> > JACK server starting in realtime mode with priority 10
> > self-connect-mode is "Don't restrict self connect requests"
> > Acquired audio card Audio1
> > creating alsa driver ... hw:CARD=hiFace2,DEV=0|-|1024|3|96000|0|0|nomon|swmeter|-|32bit
> > ERROR: ALSA: Cannot open PCM device alsa_pcm for playback. Falling back to capture-only mode
> > Released audio card Audio1
> > ERROR: Cannot initialize driver
> > ERROR: JackServer::Open failed with -1
> > ERROR: Failed to open server
>
> Which kernel did you test? There have been a few more USB-audio fixes
> that landed to Linus tree yesterday, so you'd need to test with it (in
> addition to the previous patch).
Sorry, thought that'd be clear from the alsa-info output, but yes, the
tip of Linus's tree at the time: 5.11.0-rc4-00164-g83d09ad4b950
> > here's what aplay does when it tries:
> >
> > aplay: main:830: audio open error: Invalid argument
> >
> > strace of that says:
> > openat(AT_FDCWD, "/dev/snd/pcmC1D0p", O_RDWR|O_NONBLOCK|O_CLOEXEC) = -1 EINVAL (Invalid argument)
>
> Hm, it's weird that open returns -EINVAL, not the later ioctl...
>
> > I dug up a different USB sound device (bithead) and plugged it in, it
> > still works just fine with the same commands.
> >
> > The only difference I see in the alsa-info output is that
> >
> > control.7 {
> > iface CARD
> > name 'Keep Interface'
> > value false
> > comment {
> > access 'read write'
> > type BOOLEAN
> > count 1
> > }
> > }
> >
> > has gone missing.
>
> This is an intended change and should be irrelevant.
Groovy.
> If the problem is still seen with the very latest Linus tree and the
> previous patch, please enable the dyndbg, e.g. pass dydbg=+p option to
> snd-usb-audio module, i.e. reload like
> modprobe snd-usb-audio dydbg=+p
> or boot with
> snd_usb_audio.dyndbg=+p
> boot option, retest, and give the kernel messages.
OK, updated to 5.11.0-rc4-00202-gfe75a21824e7, repatched & rebuilt with:
CONFIG_SND_DEBUG=y
CONFIG_SND_CTL_VALIDATION=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
and added dyndbg=+p to my snd-usb-audio options, dmesg after an
attempted aplay execution is attached. For grins I built a 5.10.9
kernel with the same config to compare ... the difference between
5.10.9 and 5.11.0-rc4-00202-gfe75a21824e7 debug output is basically:
+usb 1-1.1.2: 1:1: found sync_ep=0x81, iface=1, alt=1, implicit_fb=0
usb 1-1.1.2: 1:1: add audio endpoint 0x1
+usb 1-1.1.2: Creating new data endpoint #1
+usb 1-1.1.2: Creating new sync endpoint #81
+usb 1-1.1.2: 1:1 Set sample rate 192000, clock 40
usb 1-1.1.2: [10] FU [M2Tech Audio 2.0 Output Playback Switch] ch = 2, val = 0/1/1
usb 1-1.1.2: [10] FU [M2Tech Audio 2.0 Output Playback Switch] ch = 1, val = 0/1/1
usb 1-1.1.2: RANGE setting not yet supported
usb 1-1.1.2: [10] FU [M2Tech Audio 2.0 Output Playback Volume] ch = 2, val = -32512/0/256
usb 1-1.1.2: RANGE setting not yet supported
usb 1-1.1.2: [10] FU [M2Tech Audio 2.0 Output Playback Volume] ch = 1, val = -32512/0/256
...and then on 5.10.9 once I start up jackd ...
-usb 1-1.1.2: setting usb interface 1:1
-usb 1-1.1.2: Creating new playback data endpoint #1
-usb 1-1.1.2: Creating new capture sync endpoint #81
-usb 1-1.1.2: Setting params for ep #1 (type 0, 12 urbs), ret=0
-usb 1-1.1.2: Setting params for ep #81 (type 1, 4 urbs), ret=0
-usb 1-1.1.2: Starting data EP @00000000d63f36f3
-usb 1-1.1.2: Starting sync EP @00000000e9f3024b
--
Jamie Heilman http://audible.transient.net/~jamie/
[-- Attachment #2: v5.11.0-rc4-00202-gfe75a21824e7-dirty-dmesg.txt --]
[-- Type: text/plain, Size: 59578 bytes --]
[ 0.000000] Linux version 5.11.0-rc4-00202-gfe75a21824e7-dirty (jamie@cucamonga) (gcc (Debian 10.2.1-3) 10.2.1 20201224, GNU ld (GNU Binutils for Debian) 2.35.1) #1 SMP PREEMPT Sat Jan 23 07:06:19 UTC 2021
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc4-00202-gfe75a21824e7-dirty root=/dev/mapper/S-root ro rng-core.default_quality=512
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfe01bff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfe01c00-0x00000000bfe53bff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfe53c00-0x00000000bfe55bff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfe55c00-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Dell Inc. Precision WorkStation T3400 /0TP412, BIOS A14 04/30/2012
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2992.276 MHz processor
[ 0.000780] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000783] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000788] last_pfn = 0x23c000 max_arch_pfn = 0x400000000
[ 0.000792] MTRR default type: uncachable
[ 0.000794] MTRR fixed ranges enabled:
[ 0.000796] 00000-9FFFF write-back
[ 0.000797] A0000-BFFFF uncachable
[ 0.000799] C0000-D3FFF write-protect
[ 0.000800] D4000-EFFFF uncachable
[ 0.000801] F0000-FFFFF write-protect
[ 0.000803] MTRR variable ranges enabled:
[ 0.000804] 0 base 000000000 mask 000000000 write-back
[ 0.000806] 1 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000808] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000810] 3 disabled
[ 0.000810] 4 disabled
[ 0.000811] 5 disabled
[ 0.000812] 6 disabled
[ 0.002183] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002741] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
[ 0.002750] last_pfn = 0xbfe01 max_arch_pfn = 0x400000000
[ 0.002766] check: Scanning 1 areas for low memory corruption
[ 0.003200] RAMDISK: [mem 0x3718b000-0x378bcfff]
[ 0.003208] ACPI: Early table checksum verification disabled
[ 0.003212] ACPI: RSDP 0x00000000000FEBF0 000024 (v02 DELL )
[ 0.003217] ACPI: XSDT 0x00000000000FCEAA 000084 (v01 DELL B9K 00000015 ASL 00000061)
[ 0.003224] ACPI: FACP 0x00000000000FCFD2 0000F4 (v03 DELL B9K 00000015 ASL 00000061)
[ 0.003229] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20201113/tbfadt-564)
[ 0.003341] ACPI: DSDT 0x00000000FFF5D83F 003794 (v01 DELL dt_ex 00001000 INTL 20050624)
[ 0.003349] ACPI: FACS 0x00000000BFE01C00 000040
[ 0.003352] ACPI: FACS 0x00000000BFE01C00 000040
[ 0.003418] ACPI: SSDT 0x00000000FFF610F4 0000AC (v01 DELL st_ex 00001000 INTL 20050624)
[ 0.003422] ACPI: APIC 0x00000000000FD0C6 000092 (v01 DELL B9K 00000015 ASL 00000061)
[ 0.003426] ACPI: BOOT 0x00000000000FD158 000028 (v01 DELL B9K 00000015 ASL 00000061)
[ 0.003430] ACPI: ASF! 0x00000000000FD180 000096 (v32 DELL B9K 00000015 ASL 00000061)
[ 0.003434] ACPI: MCFG 0x00000000000FD216 00003E (v01 DELL B9K 00000015 ASL 00000061)
[ 0.003438] ACPI: HPET 0x00000000000FD254 000038 (v01 DELL B9K 00000015 ASL 00000061)
[ 0.003442] ACPI: TCPA 0x00000000000FD4B0 000032 (v01 DELL B9K 00000015 ASL 00000061)
[ 0.003446] ACPI: SLIC 0x00000000000FD28C 000176 (v01 DELL B9K 00000015 ASL 00000061)
[ 0.003450] ACPI: SSDT 0x00000000BFE01C40 0001F9 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624)
[ 0.003454] ACPI: SSDT 0x00000000BFE02049 0001F9 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624)
[ 0.003458] ACPI: SSDT 0x00000000BFE02452 000140 (v01 DpgPmm CpuPm 00000010 INTL 20050624)
[ 0.003729] ACPI: Local APIC address 0xfee00000
[ 0.003749] Zone ranges:
[ 0.003750] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.003753] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.003755] Normal [mem 0x0000000100000000-0x000000023bffffff]
[ 0.003757] Movable zone start for each node
[ 0.003758] Early memory node ranges
[ 0.003758] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.003760] node 0: [mem 0x0000000000100000-0x00000000bfe00fff]
[ 0.003762] node 0: [mem 0x0000000100000000-0x000000023bffffff]
[ 0.003973] Zeroed struct page in unavailable ranges: 16994 pages
[ 0.003974] Initmem setup node 0 [mem 0x0000000000001000-0x000000023bffffff]
[ 0.003976] On node 0 totalpages: 2080158
[ 0.003978] DMA zone: 64 pages used for memmap
[ 0.003979] DMA zone: 21 pages reserved
[ 0.003980] DMA zone: 3997 pages, LIFO batch:0
[ 0.004026] DMA32 zone: 12217 pages used for memmap
[ 0.004028] DMA32 zone: 781825 pages, LIFO batch:63
[ 0.021226] Normal zone: 20224 pages used for memmap
[ 0.021229] Normal zone: 1294336 pages, LIFO batch:63
[ 0.051487] ACPI: PM-Timer IO Port: 0x808
[ 0.051491] ACPI: Local APIC address 0xfee00000
[ 0.051498] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.051510] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.051513] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.051515] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.051518] ACPI: IRQ0 used by override.
[ 0.051519] ACPI: IRQ9 used by override.
[ 0.051521] Using ACPI (MADT) for SMP configuration information
[ 0.051522] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.051529] smpboot: 8 Processors exceeds NR_CPUS limit of 2
[ 0.051530] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.051544] [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.051549] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.056412] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.056993] percpu: Embedded 44 pages/cpu s139416 r8192 d32616 u1048576
[ 0.056998] pcpu-alloc: s139416 r8192 d32616 u1048576 alloc=1*2097152
[ 0.057001] pcpu-alloc: [0] 0 1
[ 0.057019] Built 1 zonelists, mobility grouping on. Total pages: 2047632
[ 0.057022] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc4-00202-gfe75a21824e7-dirty root=/dev/mapper/S-root ro rng-core.default_quality=512
[ 0.058938] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.059966] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.060011] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:on
[ 0.060014] mem auto-init: clearing system memory may take some time...
[ 3.174905] Memory: 8080664K/8320632K available (10242K kernel code, 1025K rwdata, 2444K rodata, 876K init, 1408K bss, 239712K reserved, 0K cma-reserved)
[ 3.174951] random: get_random_u64 called from cache_random_seq_create+0x95/0x180 with crng_init=0
[ 3.175024] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 3.175032] random: get_random_u32 called from allocate_slab+0x13b/0x3c0 with crng_init=0
[ 3.175042] Kernel/User page tables isolation: enabled
[ 3.175101] rcu: Preemptible hierarchical RCU implementation.
[ 3.175104] Trampoline variant of Tasks RCU enabled.
[ 3.175105] Tracing variant of Tasks RCU enabled.
[ 3.175106] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 3.175116] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16
[ 3.175325] random: get_random_bytes called from start_kernel+0x38a/0x521 with crng_init=0
[ 3.177504] Console: colour VGA+ 80x25
[ 3.182146] printk: console [tty0] enabled
[ 3.182202] ACPI: Core revision 20201113
[ 3.242227] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 3.242302] APIC: Switch to symmetric I/O mode setup
[ 3.242706] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 3.247301] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b21c4e23d0, max_idle_ns: 440795283298 ns
[ 3.247370] Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.55 BogoMIPS (lpj=2992276)
[ 3.247435] pid_max: default: 32768 minimum: 301
[ 3.247509] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 3.247564] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 3.247833] mce: CPU0: Thermal monitoring enabled (TM2)
[ 3.247886] process: using mwait in idle threads
[ 3.247939] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 3.247990] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 3.248044] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 3.248107] Spectre V2 : Mitigation: Full generic retpoline
[ 3.248158] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 3.248211] Speculative Store Bypass: Vulnerable
[ 3.248264] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 3.248446] Freeing SMP alternatives memory: 24K
[ 3.350876] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 3.351046] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[ 3.351108] ... version: 2
[ 3.351158] ... bit width: 40
[ 3.351208] ... generic registers: 2
[ 3.351257] ... value mask: 000000ffffffffff
[ 3.351308] ... max period: 000000007fffffff
[ 3.351358] ... fixed-purpose events: 3
[ 3.351366] ... event mask: 0000000700000003
[ 3.351366] rcu: Hierarchical SRCU implementation.
[ 3.351366] smp: Bringing up secondary CPUs ...
[ 3.351366] x86: Booting SMP configuration:
[ 3.351368] .... node #0, CPUs: #1
[ 3.352396] smp: Brought up 1 node, 2 CPUs
[ 3.353424] smpboot: Max logical packages: 4
[ 3.353475] smpboot: Total of 2 processors activated (11969.10 BogoMIPS)
[ 3.354571] devtmpfs: initialized
[ 3.355412] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 3.355481] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 3.355623] NET: Registered protocol family 16
[ 3.355838] thermal_sys: Registered thermal governor 'step_wise'
[ 3.355900] cpuidle: using governor teo
[ 3.356017] Simple Boot Flag at 0x7a set to 0x1
[ 3.356075] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 3.356129] ACPI: bus type PCI registered
[ 3.356222] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 3.356288] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 3.356346] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[ 3.356530] PCI: Using configuration type 1 for base access
[ 3.708450] ACPI: Added _OSI(Module Device)
[ 3.708495] ACPI: Added _OSI(Processor Device)
[ 3.708545] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 3.708595] ACPI: Added _OSI(Processor Aggregator Device)
[ 3.708646] ACPI: Added _OSI(Linux-Dell-Video)
[ 3.708697] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 3.708748] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 3.752402] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 3.760559] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 3.793700] ACPI: Interpreter enabled
[ 3.793753] ACPI: (supports S0 S5)
[ 3.793801] ACPI: Using IOAPIC for interrupt routing
[ 3.793960] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 3.794472] ACPI: Enabled 12 GPEs in block 00 to 3F
[ 3.950312] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 3.950372] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 3.959724] PCI host bridge to bus 0000:00
[ 3.959774] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 3.959826] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 3.959878] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 3.959931] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff window]
[ 3.959983] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 3.960368] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfec00000 window]
[ 3.960421] pci_bus 0000:00: root bus resource [mem 0xbff00000-0xdfffffff window]
[ 3.960473] pci_bus 0000:00: root bus resource [mem 0xff980800-0xff980bff window]
[ 3.960525] pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff window]
[ 3.960577] pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff window]
[ 3.960629] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.960691] pci 0000:00:00.0: [8086:29e0] type 00 class 0x060000
[ 3.961371] pci 0000:00:01.0: [8086:29e1] type 01 class 0x060400
[ 3.961371] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 3.961393] pci 0000:00:06.0: [8086:29e9] type 01 class 0x060400
[ 3.961393] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 3.962369] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 3.962369] pci 0000:00:1a.0: reg 0x20: [io 0xff20-0xff3f]
[ 3.962393] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 3.962393] pci 0000:00:1a.1: reg 0x20: [io 0xff00-0xff1f]
[ 3.963370] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 3.963370] pci 0000:00:1a.2: reg 0x20: [io 0xecc0-0xecdf]
[ 3.963393] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 3.963393] pci 0000:00:1a.7: reg 0x10: [mem 0xfdffbc00-0xfdffbfff]
[ 3.963393] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 3.964367] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 3.964367] pci 0000:00:1b.0: reg 0x10: [mem 0xfdffc000-0xfdffffff 64bit]
[ 3.964367] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 3.964393] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 3.964423] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 3.965375] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 3.965375] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 3.965392] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 3.965400] pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f]
[ 3.966368] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 3.966368] pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f]
[ 3.966392] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 3.966399] pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f]
[ 3.967369] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 3.967369] pci 0000:00:1d.7: reg 0x10: [mem 0xff980800-0xff980bff]
[ 3.967369] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 3.967417] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 3.968373] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[ 3.968373] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 3.968373] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
[ 3.968373] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 3.968373] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
[ 3.969369] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[ 3.969369] pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
[ 3.969369] pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13]
[ 3.969369] pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27]
[ 3.969369] pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33]
[ 3.969369] pci 0000:00:1f.2: reg 0x20: [io 0xfec0-0xfedf]
[ 3.969369] pci 0000:00:1f.2: reg 0x24: [mem 0xff970000-0xff9707ff]
[ 3.969369] pci 0000:00:1f.2: PME# supported from D3hot
[ 3.969392] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 3.969392] pci 0000:00:1f.3: reg 0x10: [mem 0xfdffbb00-0xfdffbbff 64bit]
[ 3.969446] pci 0000:00:1f.3: reg 0x20: [io 0xece0-0xecff]
[ 3.970389] pci 0000:01:00.0: [10de:042f] type 00 class 0x030000
[ 3.970389] pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff]
[ 3.970389] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 3.970389] pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 3.970389] pci 0000:01:00.0: reg 0x24: [io 0xdc80-0xdcff]
[ 3.970389] pci 0000:01:00.0: reg 0x30: [mem 0xfde00000-0xfde1ffff pref]
[ 3.970418] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 3.970418] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 3.970420] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfdefffff]
[ 3.970473] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 3.971371] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 3.971392] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 3.971392] pci 0000:00:1c.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 3.971392] pci 0000:04:00.0: [14e4:167a] type 00 class 0x020000
[ 3.971392] pci 0000:04:00.0: reg 0x10: [mem 0xf9ef0000-0xf9efffff 64bit]
[ 3.971392] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 3.971392] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 3.971392] pci 0000:00:1c.5: bridge window [mem 0xf9e00000-0xf9efffff]
[ 3.971392] pci_bus 0000:05: extended config space not accessible
[ 3.971392] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 3.971448] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 3.971509] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 3.971570] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 3.971632] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff window] (subtractive decode)
[ 3.971693] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 3.971755] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfec00000 window] (subtractive decode)
[ 3.971816] pci 0000:00:1e.0: bridge window [mem 0xbff00000-0xdfffffff window] (subtractive decode)
[ 3.971878] pci 0000:00:1e.0: bridge window [mem 0xff980800-0xff980bff window] (subtractive decode)
[ 3.971939] pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff window] (subtractive decode)
[ 3.972001] pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff window] (subtractive decode)
[ 3.972076] pci_bus 0000:00: on NUMA node 0
[ 4.002773] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 4.003718] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 4.004656] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 4.005621] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 4.006565] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 4.007529] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 4.008469] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 4.009413] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 4.010508] iommu: Default domain type: Translated
[ 4.010573] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 4.010573] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 4.010573] pci 0000:01:00.0: vgaarb: bridge control possible
[ 4.010573] vgaarb: loaded
[ 4.010663] SCSI subsystem initialized
[ 4.010725] libata version 3.00 loaded.
[ 4.010747] ACPI: bus type USB registered
[ 4.011389] usbcore: registered new interface driver usbfs
[ 4.011448] usbcore: registered new interface driver hub
[ 4.011506] usbcore: registered new device driver usb
[ 4.011582] EDAC MC: Ver: 3.0.0
[ 4.011738] PCI: Using ACPI for IRQ routing
[ 4.015821] PCI: pci_cache_line_size set to 64 bytes
[ 4.015841] pci 0000:00:1f.2: can't claim BAR 5 [mem 0xff970000-0xff9707ff]: no compatible bridge window
[ 4.015921] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[ 4.015973] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[ 4.016024] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 4.016026] e820: reserve RAM buffer [mem 0xbfe01c00-0xbfffffff]
[ 4.016474] hpet: 4 channels of 0 reserved for per-cpu timers
[ 4.016526] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 4.016580] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 4.018383] clocksource: Switched to clocksource tsc-early
[ 4.018498] pnp: PnP ACPI init
[ 4.021771] pnp 00:00: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x0800-0x087f]
[ 4.021836] pnp 00:00: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 7 [io 0x0800-0x087f]
[ 4.021919] system 00:00: [io 0x0c00-0x0c7f] has been reserved
[ 4.021976] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 4.022203] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 4.028755] pnp 00:02: [dma 2]
[ 4.029237] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 4.035109] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 4.042655] pnp 00:04: [dma 0 disabled]
[ 4.043835] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 4.049146] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 4.053989] pnp 00:06: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 4.063249] pnp: PnP ACPI: found 7 devices
[ 4.069895] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 4.069987] NET: Registered protocol family 2
[ 4.070152] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 4.070231] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 4.070452] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 4.070812] TCP: Hash tables configured (established 65536 bind 65536)
[ 4.070876] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 4.070961] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 4.071068] NET: Registered protocol family 1
[ 4.071129] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 4.071184] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 4.071250] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 4.071303] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 4.071379] pci 0000:00:1c.0: BAR 9: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[ 4.071441] pci 0000:00:1c.5: BAR 9: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 4.071495] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 4.071548] pci 0000:00:1c.5: BAR 7: assigned [io 0x2000-0x2fff]
[ 4.071601] pci 0000:00:1f.2: BAR 5: assigned [mem 0xf0400000-0xf04007ff]
[ 4.071657] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 4.071708] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 4.071760] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfdefffff]
[ 4.071812] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 4.071866] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 4.071919] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 4.071969] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 4.072022] pci 0000:00:1c.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 4.072075] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 4.072131] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 4.072181] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 4.072234] pci 0000:00:1c.5: bridge window [mem 0xf9e00000-0xf9efffff]
[ 4.072287] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 4.072342] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 4.072399] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 4.072452] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 4.072503] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 4.072555] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff window]
[ 4.072607] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff window]
[ 4.072658] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfec00000 window]
[ 4.072710] pci_bus 0000:00: resource 10 [mem 0xbff00000-0xdfffffff window]
[ 4.072762] pci_bus 0000:00: resource 11 [mem 0xff980800-0xff980bff window]
[ 4.072814] pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff window]
[ 4.072865] pci_bus 0000:00: resource 13 [mem 0xfed20000-0xfed9ffff window]
[ 4.072917] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 4.072968] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfdefffff]
[ 4.073019] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 4.073071] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 4.073122] pci_bus 0000:03: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 4.073860] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 4.073912] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 4.073962] pci_bus 0000:04: resource 1 [mem 0xf9e00000-0xf9efffff]
[ 4.074013] pci_bus 0000:04: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[ 4.074066] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 4.074117] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 4.074168] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 4.074219] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000effff window]
[ 4.074271] pci_bus 0000:05: resource 8 [mem 0x000f0000-0x000fffff window]
[ 4.074323] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfec00000 window]
[ 4.074375] pci_bus 0000:05: resource 10 [mem 0xbff00000-0xdfffffff window]
[ 4.074427] pci_bus 0000:05: resource 11 [mem 0xff980800-0xff980bff window]
[ 4.074479] pci_bus 0000:05: resource 12 [mem 0xff97c000-0xff97ffff window]
[ 4.074531] pci_bus 0000:05: resource 13 [mem 0xfed20000-0xfed9ffff window]
[ 4.079518] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 4.079575] PCI: CLS 64 bytes, default 64
[ 4.079661] Trying to unpack rootfs image as initramfs...
[ 4.779686] Freeing initrd memory: 7368K
[ 4.779748] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 4.779799] software IO TLB: mapped [mem 0x00000000bbe01000-0x00000000bfe01000] (64MB)
[ 4.779976] _warn_unseeded_randomness: 33 callbacks suppressed
[ 4.779979] random: get_random_u64 called from copy_process+0x2ac/0x1940 with crng_init=0
[ 4.780261] check: Scanning for low memory corruption every 60 seconds
[ 4.781125] Initialise system trusted keyrings
[ 4.781178] random: get_random_bytes called from key_alloc+0x24d/0x4a0 with crng_init=0
[ 4.781260] workingset: timestamp_bits=62 max_order=21 bucket_order=0
[ 4.782561] random: get_random_u64 called from cache_random_seq_create+0x95/0x180 with crng_init=0
[ 4.782653] Key type asymmetric registered
[ 4.782762] Asymmetric key parser 'x509' registered
[ 4.782819] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 4.782898] io scheduler mq-deadline registered
[ 4.782948] io scheduler kyber registered
[ 4.783033] io scheduler bfq registered
[ 4.784743] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 4.784799] ACPI: Power Button [VBTN]
[ 4.784902] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 4.784955] ACPI: Power Button [PWRF]
[ 4.785228] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 4.785335] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 4.785873] Non-volatile memory driver v1.3
[ 4.795024] tpm_tis 00:06: 1.2 TPM (device-id 0x4A10, rev-id 78)
[ 4.885046] nouveau 0000:01:00.0: vgaarb: deactivate vga console
[ 4.885760] Console: switching to colour dummy device 80x25
[ 4.886020] nouveau 0000:01:00.0: NVIDIA G86 (086f00a2)
[ 4.905104] random: fast init done
[ 4.926085] random: crng init done
[ 4.926087] random: 5 get_random_xx warning(s) missed due to ratelimiting
[ 4.989156] nouveau 0000:01:00.0: bios: version 60.86.6c.00.21
[ 5.009988] nouveau 0000:01:00.0: bios: M0203T not found
[ 5.009992] nouveau 0000:01:00.0: bios: M0203E not matched!
[ 5.009995] nouveau 0000:01:00.0: fb: 256 MiB DDR2
[ 5.487079] [TTM] Zone kernel: Available graphics memory: 4044156 KiB
[ 5.487083] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 5.487098] nouveau 0000:01:00.0: DRM: VRAM: 256 MiB
[ 5.487102] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 5.487107] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 5.487110] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 5.487114] nouveau 0000:01:00.0: DRM: DCB outp 00: 02011300 00000028
[ 5.487118] nouveau 0000:01:00.0: DRM: DCB outp 01: 01011302 00000010
[ 5.487121] nouveau 0000:01:00.0: DRM: DCB outp 02: 01000310 00000028
[ 5.487124] nouveau 0000:01:00.0: DRM: DCB outp 03: 02000312 00000010
[ 5.487127] nouveau 0000:01:00.0: DRM: DCB conn 00: 2030
[ 5.487130] nouveau 0000:01:00.0: DRM: DCB conn 01: 1130
[ 5.488886] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies
[ 5.530492] nouveau 0000:01:00.0: DRM: allocated 1920x1200 fb: 0x50000, bo 0000000090c945b1
[ 5.532415] fbcon: nouveaudrmfb (fb0) is primary device
[ 5.651740] Console: switching to colour frame buffer device 240x75
[ 5.654897] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[ 5.655082] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 5.655161] parport_pc 00:04: reported by Plug and Play ACPI
[ 5.655224] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
[ 5.745779] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082D (\GLBC) (20201113/utaddress-204)
[ 5.745794] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x000000000000082A-0x000000000000082A (\SACT) (20201113/utaddress-204)
[ 5.745805] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x0000000000000828 (\SSTS) (20201113/utaddress-204)
[ 5.745816] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.745845] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.745912] ahci 0000:00:1f.2: version 3.0
[ 5.746308] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 5.746318] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
[ 5.761903] scsi host0: ahci
[ 5.762016] scsi host1: ahci
[ 5.762103] scsi host2: ahci
[ 5.762196] scsi host3: ahci
[ 5.762287] scsi host4: ahci
[ 5.762386] scsi host5: ahci
[ 5.762434] ata1: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400100 irq 29
[ 5.762442] ata2: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400180 irq 29
[ 5.762448] ata3: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400200 irq 29
[ 5.762453] ata4: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400280 irq 29
[ 5.762459] ata5: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400300 irq 29
[ 5.762465] ata6: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400380 irq 29
[ 5.762506] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.762515] ehci-pci: EHCI PCI platform driver
[ 5.762858] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 5.762868] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 5.762883] ehci-pci 0000:00:1a.7: debug port 1
[ 5.766810] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfdffbc00
[ 5.773375] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 5.773452] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 5.773464] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.773473] usb usb1: Product: EHCI Host Controller
[ 5.773479] usb usb1: Manufacturer: Linux 5.11.0-rc4-00202-gfe75a21824e7-dirty ehci_hcd
[ 5.773490] usb usb1: SerialNumber: 0000:00:1a.7
[ 5.773590] hub 1-0:1.0: USB hub found
[ 5.773601] hub 1-0:1.0: 6 ports detected
[ 5.774059] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 5.774070] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 5.774083] ehci-pci 0000:00:1d.7: debug port 1
[ 5.777977] ehci-pci 0000:00:1d.7: irq 23, io mem 0xff980800
[ 5.784375] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.784423] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 5.784435] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.784443] usb usb2: Product: EHCI Host Controller
[ 5.784450] usb usb2: Manufacturer: Linux 5.11.0-rc4-00202-gfe75a21824e7-dirty ehci_hcd
[ 5.784458] usb usb2: SerialNumber: 0000:00:1d.7
[ 5.784556] hub 2-0:1.0: USB hub found
[ 5.784565] hub 2-0:1.0: 6 ports detected
[ 5.784951] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.785506] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 5.785750] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 5.786032] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 5.786595] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[ 5.787150] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.11
[ 5.787654] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.788194] usb usb3: Product: UHCI Host Controller
[ 5.788749] usb usb3: Manufacturer: Linux 5.11.0-rc4-00202-gfe75a21824e7-dirty uhci_hcd
[ 5.789307] usb usb3: SerialNumber: 0000:00:1a.0
[ 5.789940] hub 3-0:1.0: USB hub found
[ 5.790435] hub 3-0:1.0: 2 ports detected
[ 5.791369] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 5.791614] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 5.792117] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 5.792699] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
[ 5.793284] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.11
[ 5.793832] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.794422] usb usb4: Product: UHCI Host Controller
[ 5.795013] usb usb4: Manufacturer: Linux 5.11.0-rc4-00202-gfe75a21824e7-dirty uhci_hcd
[ 5.795620] usb usb4: SerialNumber: 0000:00:1a.1
[ 5.796301] hub 4-0:1.0: USB hub found
[ 5.796846] hub 4-0:1.0: 2 ports detected
[ 5.797829] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 5.798078] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 5.798655] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 5.799260] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000ecc0
[ 5.799875] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.11
[ 5.800444] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.801028] usb usb5: Product: UHCI Host Controller
[ 5.801595] usb usb5: Manufacturer: Linux 5.11.0-rc4-00202-gfe75a21824e7-dirty uhci_hcd
[ 5.802174] usb usb5: SerialNumber: 0000:00:1a.2
[ 5.802834] hub 5-0:1.0: USB hub found
[ 5.803337] hub 5-0:1.0: 2 ports detected
[ 5.804271] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.804509] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 5.804983] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 5.805533] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
[ 5.806102] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.11
[ 5.806633] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.807197] usb usb6: Product: UHCI Host Controller
[ 5.807776] usb usb6: Manufacturer: Linux 5.11.0-rc4-00202-gfe75a21824e7-dirty uhci_hcd
[ 5.808364] usb usb6: SerialNumber: 0000:00:1d.0
[ 5.809023] hub 6-0:1.0: USB hub found
[ 5.809548] hub 6-0:1.0: 2 ports detected
[ 5.810517] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.810763] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 5.811342] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 5.811972] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[ 5.812601] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.11
[ 5.813184] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.813806] usb usb7: Product: UHCI Host Controller
[ 5.814418] usb usb7: Manufacturer: Linux 5.11.0-rc4-00202-gfe75a21824e7-dirty uhci_hcd
[ 5.815041] usb usb7: SerialNumber: 0000:00:1d.1
[ 5.815739] hub 7-0:1.0: USB hub found
[ 5.816298] hub 7-0:1.0: 2 ports detected
[ 5.817312] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.817562] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 5.818151] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 5.818784] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 5.819408] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.11
[ 5.819986] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.820608] usb usb8: Product: UHCI Host Controller
[ 5.821226] usb usb8: Manufacturer: Linux 5.11.0-rc4-00202-gfe75a21824e7-dirty uhci_hcd
[ 5.821854] usb usb8: SerialNumber: 0000:00:1d.2
[ 5.822552] hub 8-0:1.0: USB hub found
[ 5.823108] hub 8-0:1.0: 2 ports detected
[ 5.823870] i8042: PNP: PS/2 Controller [PNP0f13:MOU] at 0x60,0x64 irq 12
[ 5.824358] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 5.827717] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.827995] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.828318] mousedev: PS/2 mouse device common for all mice
[ 5.828915] rtc_cmos 00:01: RTC can wake from S4
[ 5.829639] rtc_cmos 00:01: registered as rtc0
[ 5.830122] rtc_cmos 00:01: setting system clock to 2021-01-23T09:02:00 UTC (1611392520)
[ 5.830740] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram, hpet irqs
[ 5.831689] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 5.835756] tsc: Refined TSC clocksource calibration: 2992.481 MHz
[ 5.836015] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b228661c25, max_idle_ns: 440795245102 ns
[ 5.836334] clocksource: Switched to clocksource tsc
[ 5.913182] i2c i2c-3: 4/4 memory slots populated (from DMI)
[ 5.913746] i2c i2c-3: Successfully instantiated SPD at 0x50
[ 5.914345] i2c i2c-3: Successfully instantiated SPD at 0x51
[ 5.914943] i2c i2c-3: Successfully instantiated SPD at 0x52
[ 5.915530] i2c i2c-3: Successfully instantiated SPD at 0x53
[ 5.915942] iTCO_wdt iTCO_wdt.0.auto: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
[ 5.916275] iTCO_wdt iTCO_wdt.0.auto: initialized. heartbeat=30 sec (nowayout=0)
[ 5.916982] EDAC MC0: Giving out device to module x38_edac controller x38: DEV 0000:00:00.0 (POLLED)
[ 5.917491] hid: raw HID events driver (C) Jiri Kosina
[ 5.918105] usbcore: registered new interface driver usbhid
[ 5.918721] usbhid: USB HID core driver
[ 5.919410] Key type dns_resolver registered
[ 5.920099] microcode: sig=0x1067a, pf=0x1, revision=0xa0b
[ 5.920602] microcode: Microcode Update Driver: v2.2.
[ 5.920604] IPI shorthand broadcast: enabled
[ 5.921829] sched_clock: Marking stable (5854751353, 67068459)->(5925098956, -3279144)
[ 5.922497] registered taskstats version 1
[ 5.923074] Loading compiled-in X.509 certificates
[ 5.927580] Loaded X.509 cert 'Build time autogenerated kernel key: 6b03a1065de4fe7a58e236e632955d25126249fb'
[ 5.928210] RAS: Correctable Errors collector initialized.
[ 6.076379] ata6: SATA link down (SStatus 4 SControl 300)
[ 6.076707] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.076995] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.077636] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.078258] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.078881] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.079593] ata4.00: ATA-9: WDC WD20NPVX-00EA4T0, 01.01A01, max UDMA/133
[ 6.080087] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 6.080717] ata5.00: ATA-9: WDC WD20NPVX-00EA4T0, 01.01A01, max UDMA/133
[ 6.081328] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 6.081953] ata2.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[ 6.082574] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 6.083203] ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[ 6.083828] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 6.084958] ata2.00: configured for UDMA/133
[ 6.085292] ata5.00: configured for UDMA/133
[ 6.085686] ata4.00: configured for UDMA/133
[ 6.086336] ata1.00: configured for UDMA/133
[ 6.086956] scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5
[ 6.087658] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 6.087681] scsi 1:0:0:0: Direct-Access ATA WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5
[ 6.088100] sd 0:0:0:0: [sda] Write Protect is off
[ 6.088873] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 6.089322] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.089980] ata3.00: ATAPI: PBDS CD-RW/DVD-ROM DH-48C2S, ND12, max UDMA/100
[ 6.089982] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.091201] sd 1:0:0:0: [sdb] Write Protect is off
[ 6.091831] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.091865] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.093373] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 6.101856] ata3.00: configured for UDMA/100
[ 6.105212] scsi 2:0:0:0: CD-ROM PBDS CDRWDVD DH-48C2S ND12 PQ: 0 ANSI: 5
[ 6.113705] sda: sda1 sda2
[ 6.114287] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.124156] scsi 3:0:0:0: Direct-Access ATA WDC WD20NPVX-00E 1A01 PQ: 0 ANSI: 5
[ 6.124584] sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 6.124600] scsi 4:0:0:0: Direct-Access ATA WDC WD20NPVX-00E 1A01 PQ: 0 ANSI: 5
[ 6.124851] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[ 6.125663] sd 4:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 6.126132] sd 3:0:0:0: [sdc] Write Protect is off
[ 6.126778] sd 4:0:0:0: [sdd] 4096-byte physical blocks
[ 6.127427] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 6.128081] sd 4:0:0:0: [sdd] Write Protect is off
[ 6.128088] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.128690] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 6.129381] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.221734] usb 1-1: New USB device found, idVendor=0424, idProduct=2502, bcdDevice= 0.01
[ 6.222078] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.222501] hub 1-1:1.0: USB hub found
[ 6.223108] hub 1-1:1.0: 2 ports detected
[ 6.300373] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[ 6.475831] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 6.477217] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 6.488509] usb 8-2: New USB device found, idVendor=0b33, idProduct=08a1, bcdDevice= 3.00
[ 6.488805] usb 8-2: New USB device strings: Mfr=1, Product=4, SerialNumber=3
[ 6.489181] usb 8-2: Product: Contour Mouse
[ 6.489840] usb 8-2: Manufacturer: Contour Design
[ 6.490447] usb 8-2: SerialNumber: V3.0
[ 6.500835] input: Contour Design Contour Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:0B33:08A1.0001/input/input4
[ 6.501168] hid-generic 0003:0B33:08A1.0001: input,hidraw0: USB HID v1.11 Mouse [Contour Design Contour Mouse] on usb-0000:00:1d.2-2/input0
[ 6.524374] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 6.606469] sdb: sdb1 sdb2
[ 6.607062] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 6.607670] Freeing unused kernel image (initmem) memory: 876K
[ 6.620375] Write protecting the kernel read-only data: 16384k
[ 6.621461] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 6.622311] Freeing unused kernel image (rodata/data gap) memory: 1652K
[ 6.671115] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 6.671414] x86/mm: Checking user space page tables
[ 6.698400] usb 3-2: New USB device found, idVendor=05f3, idProduct=0081, bcdDevice= 3.20
[ 6.698696] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.699131] usb 3-2: Product: Kinesis Keyboard Hub
[ 6.699819] usb 3-2: Manufacturer: PI Engineering
[ 6.703406] hub 3-2:1.0: USB hub found
[ 6.705388] hub 3-2:1.0: 4 ports detected
[ 6.715715] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 6.716009] Run /init as init process
[ 6.716406] with arguments:
[ 6.716408] /init
[ 6.716409] with environment:
[ 6.716410] HOME=/
[ 6.716411] TERM=linux
[ 6.716412] BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc4-00202-gfe75a21824e7-dirty
[ 6.856050] md/raid1:md0: active with 2 out of 2 mirrors
[ 6.856372] md0: detected capacity change from 1953524896 to 0
[ 6.857940] md0: p1 p2
[ 7.000377] usb 3-2.2: new full-speed USB device number 3 using uhci_hcd
[ 7.045658] device-mapper: uevent: version 1.0.3
[ 7.046032] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[ 7.047328] dm-0: detected capacity change from 16777216 to 0
[ 7.047996] dm-1: detected capacity change from 209715200 to 0
[ 7.050052] dm-2: detected capacity change from 209715200 to 0
[ 7.051418] dm-3: detected capacity change from 20971520 to 0
[ 7.057122] dm-4: detected capacity change from 14680064 to 0
[ 7.057892] dm-5: detected capacity change from 230686720 to 0
[ 7.060097] dm-6: detected capacity change from 12582912 to 0
[ 7.062073] dm-7: detected capacity change from 104857600 to 0
[ 7.063415] dm-8: detected capacity change from 104857600 to 0
[ 7.116394] usb 3-2.2: New USB device found, idVendor=05f3, idProduct=0007, bcdDevice= 3.20
[ 7.116751] usb 3-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.124782] input: HID 05f3:0007 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/0003:05F3:0007.0002/input/input6
[ 7.177417] hid-generic 0003:05F3:0007.0002: input,hidraw1: USB HID v1.00 Keyboard [HID 05f3:0007] on usb-0000:00:1a.0-2.2/input0
[ 7.182201] input: HID 05f3:0007 System Control as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.1/0003:05F3:0007.0003/input/input7
[ 7.190376] usb 1-1.1: new high-speed USB device number 4 using ehci-pci
[ 7.234453] input: HID 05f3:0007 Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.1/0003:05F3:0007.0003/input/input8
[ 7.234787] hid-generic 0003:05F3:0007.0003: input,hidraw2: USB HID v1.00 Device [HID 05f3:0007] on usb-0000:00:1a.0-2.2/input1
[ 7.281737] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01
[ 7.282095] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.282761] hub 1-1.1:1.0: USB hub found
[ 7.283358] hub 1-1.1:1.0: 4 ports detected
[ 7.352916] input: PS2++ Logitech Mouse as /devices/platform/i8042/serio1/input/input5
[ 7.364376] usb 1-1.2: new high-speed USB device number 5 using ehci-pci
[ 7.531110] usb 1-1.2: New USB device found, idVendor=0424, idProduct=223a, bcdDevice= 3.60
[ 7.531463] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.531897] usb 1-1.2: Product: USB2223
[ 7.532614] usb 1-1.2: Manufacturer: SMSC
[ 7.533323] usb 1-1.2: SerialNumber: 000223223223
[ 7.566376] usb 1-1.1.2: new high-speed USB device number 6 using ehci-pci
[ 7.657484] usb 1-1.1.2: New USB device found, idVendor=249c, idProduct=930b, bcdDevice= 2.13
[ 7.657824] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.658229] usb 1-1.1.2: Product: M2Tech USB Audio 2.0
[ 7.658937] usb 1-1.1.2: Manufacturer: M2Tech
[ 7.659638] usb 1-1.1.2: SerialNumber: 0000
[ 8.685512] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 8.956033] XFS (dm-0): Deprecated V4 format (crc=0) will not be supported after September 2030.
[ 8.956505] XFS (dm-0): Mounting V4 Filesystem
[ 9.164449] XFS (dm-0): Ending clean mount
[ 11.197457] Floppy drive(s): fd0 is 1.44M
[ 11.211551] FDC 0 is a post-1991 82077
[ 11.260152] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 11.260482] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 11.261068] scsi 2:0:0:0: Attached scsi generic sg2 type 5
[ 11.262307] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 11.262622] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 11.387901] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[ 11.407000] sr 2:0:0:0: [sr0] scsi3-mmc drive: 0x/48x writer cd/rw xa/form2 cdda tray
[ 11.407389] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 11.422124] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM95754) rev b002] (PCI Express) MAC address 00:24:e8:2e:01:56
[ 11.422427] tg3 0000:04:00.0 eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 11.422902] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 11.423628] tg3 0000:04:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 11.426611] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 11.945362] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 11.945750] scsi host6: usb-storage 1-1.2:1.0
[ 11.946229] usbcore: registered new interface driver usb-storage
[ 12.023206] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1984: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
[ 12.023528] snd_hda_codec_analog hdaudioC0D0: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
[ 12.024038] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 12.024804] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
[ 12.025507] snd_hda_codec_analog hdaudioC0D0: inputs:
[ 12.026231] snd_hda_codec_analog hdaudioC0D0: Mic=0x14
[ 12.026970] snd_hda_codec_analog hdaudioC0D0: Line=0x15
[ 12.036134] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 12.036487] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.037009] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 12.037781] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 12.081987] usb 1-1.1.2: 1:1: found sync_ep=0x81, iface=1, alt=1, implicit_fb=0
[ 12.081994] usb 1-1.1.2: 1:1: add audio endpoint 0x1
[ 12.082006] usb 1-1.1.2: Creating new data endpoint #1
[ 12.082010] usb 1-1.1.2: Creating new sync endpoint #81
[ 12.082111] usb 1-1.1.2: 1:1 Set sample rate 192000, clock 40
[ 12.083112] usb 1-1.1.2: [10] FU [M2Tech Audio 2.0 Output Playback Switch] ch = 2, val = 0/1/1
[ 12.083237] usb 1-1.1.2: [10] FU [M2Tech Audio 2.0 Output Playback Switch] ch = 1, val = 0/1/1
[ 12.083734] usb 1-1.1.2: RANGE setting not yet supported
[ 12.084360] usb 1-1.1.2: [10] FU [M2Tech Audio 2.0 Output Playback Volume] ch = 2, val = -32512/0/256
[ 12.084859] usb 1-1.1.2: RANGE setting not yet supported
[ 12.085484] usb 1-1.1.2: [10] FU [M2Tech Audio 2.0 Output Playback Volume] ch = 1, val = -32512/0/256
[ 12.085754] usbcore: registered new interface driver snd-usb-audio
[ 13.011631] scsi 6:0:0:0: Direct-Access SMSC 223 U HS-CF 3.60 PQ: 0 ANSI: 0
[ 13.015247] scsi 6:0:0:1: Direct-Access SMSC 223 U HS-MS 3.60 PQ: 0 ANSI: 0
[ 13.018873] scsi 6:0:0:2: Direct-Access SMSC 223 U HS-SM 3.60 PQ: 0 ANSI: 0
[ 13.022000] scsi 6:0:0:3: Direct-Access SMSC 223 U HS-SD/MMC 3.60 PQ: 0 ANSI: 0
[ 13.022510] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 13.022908] sd 6:0:0:1: Attached scsi generic sg6 type 0
[ 13.023611] sd 6:0:0:2: Attached scsi generic sg7 type 0
[ 13.024265] sd 6:0:0:3: Attached scsi generic sg8 type 0
[ 13.036247] sd 6:0:0:0: [sde] Attached SCSI removable disk
[ 13.047244] sd 6:0:0:1: [sdf] Attached SCSI removable disk
[ 13.115994] sd 6:0:0:2: [sdg] Attached SCSI removable disk
[ 13.128994] sd 6:0:0:3: [sdh] Attached SCSI removable disk
[ 13.605464] xfs filesystem being remounted at / supports timestamps until 2038 (0x7fffffff)
[ 14.328955] tun: Universal TUN/TAP device driver, 1.6
[ 14.707141] dm-9: detected capacity change from 16776352 to 0
[ 15.223952] XFS (dm-1): Mounting V4 Filesystem
[ 15.362310] XFS (dm-1): Ending clean mount
[ 15.362713] xfs filesystem being mounted at /var supports timestamps until 2038 (0x7fffffff)
[ 15.381857] XFS (sdc): Mounting V5 Filesystem
[ 15.615617] XFS (sdc): Ending clean mount
[ 15.659101] xfs filesystem being mounted at /media/music supports timestamps until 2038 (0x7fffffff)
[ 15.763372] Adding 8388172k swap on /dev/mapper/swap. Priority:-2 extents:1 across:8388172k
[ 16.481454] br0: port 1(eth0) entered blocking state
[ 16.481743] br0: port 1(eth0) entered disabled state
[ 16.482101] device eth0 entered promiscuous mode
[ 16.958416] RPC: Registered named UNIX socket transport module.
[ 16.958708] RPC: Registered udp transport module.
[ 16.959024] RPC: Registered tcp transport module.
[ 16.959656] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 16.995444] FS-Cache: Loaded
[ 17.043421] FS-Cache: Netfs 'nfs' registered for caching
[ 17.099679] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 19.661561] tg3 0000:04:00.0 eth0: Link is up at 1000 Mbps, full duplex
[ 19.663045] tg3 0000:04:00.0 eth0: Flow control is on for TX and on for RX
[ 19.664347] br0: port 1(eth0) entered blocking state
[ 19.665613] br0: port 1(eth0) entered forwarding state
[ 20.761346] NFSD: Using UMH upcall client tracking operations.
[ 20.761351] NFSD: starting 90-second grace period (net f0000098)
[ 31.115498] NFS: Registering the id_resolver key type
[ 31.115509] Key type id_resolver registered
[ 31.115511] Key type id_legacy registered
[ 108.941516] ------------[ cut here ]------------
[ 108.941521] WARNING: CPU: 0 PID: 2776 at sound/core/pcm_lib.c:1148 snd_pcm_hw_rule_add+0xd3/0x160 [snd_pcm]
[ 108.941535] Modules linked in: nfsv4 cpufreq_userspace cpufreq_powersave cpufreq_ondemand cpufreq_conservative fan autofs4 nfsd auth_rpcgss nfs lockd grace nfs_ssc fscache sunrpc bridge stp llc nhpoly1305_sse2 nhpoly1305 aes_generic libaes chacha_generic chacha_x86_64 libchacha adiantum libpoly1305 vhost_net tun vhost vhost_iotlb tap dm_crypt snd_usb_audio snd_usbmidi_lib snd_hda_codec_analog snd_rawmidi usb_storage snd_hda_codec_generic snd_seq_device kvm_intel kvm irqbypass snd_hda_intel snd_intel_dspcfg snd_hda_codec tg3 snd_hwdep dcdbas sr_mod snd_hda_core snd_pcm cdrom snd_timer snd soundcore sg floppy evdev xfs dm_mod raid1 md_mod psmouse
[ 108.941608] CPU: 0 PID: 2776 Comm: aplay Not tainted 5.11.0-rc4-00202-gfe75a21824e7-dirty #1
[ 108.941612] Hardware name: Dell Inc. Precision WorkStation T3400 /0TP412, BIOS A14 04/30/2012
[ 108.941615] RIP: 0010:snd_pcm_hw_rule_add+0xd3/0x160 [snd_pcm]
[ 108.941623] Code: 83 c1 08 4c 01 c2 48 39 c6 8b 12 74 1d 89 10 48 83 c0 04 85 d2 78 39 83 f9 2f 76 e2 48 89 fa 48 83 c7 08 48 39 c6 8b 12 75 e3 <0f> 0b b8 ea ff ff ff 48 8b 5c 24 28 65 48 2b 1c 25 28 00 00 00 75
[ 108.941627] RSP: 0018:ffffc900010a3ad8 EFLAGS: 00010246
[ 108.941631] RAX: ffff888101c51b38 RBX: ffff88810edda000 RCX: 0000000000000030
[ 108.941634] RDX: 00000000ffffffff RSI: ffff888101c51b38 RDI: ffffc900010a3b90
[ 108.941637] RBP: ffffc900010a3b60 R08: ffffc900010a3b08 R09: 000000000000000b
[ 108.941639] R10: 0000000000000100 R11: 0000000000000000 R12: 000000000000000b
[ 108.941642] R13: 000000000000000b R14: 0000000000000000 R15: ffffffffa035b2e0
[ 108.941644] FS: 00007ffbf1b46440(0000) GS:ffff888233c00000(0000) knlGS:0000000000000000
[ 108.941648] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 108.941651] CR2: 00007ffbf1ebd2d0 CR3: 000000010efe0000 CR4: 00000000000406f0
[ 108.941654] Call Trace:
[ 108.941658] ? krealloc+0x75/0xb0
[ 108.941664] ? snd_pcm_post_reset+0x40/0x40 [snd_pcm]
[ 108.941670] ? snd_pcm_hw_rule_add+0x128/0x160 [snd_pcm]
[ 108.941678] snd_usb_pcm_open+0x216/0x3b0 [snd_usb_audio]
[ 108.941690] snd_pcm_open_substream+0x546/0x8d0 [snd_pcm]
[ 108.941698] snd_pcm_open+0x121/0x270 [snd_pcm]
[ 108.941704] ? wake_up_q+0xa0/0xa0
[ 108.941710] snd_pcm_playback_open+0x38/0x60 [snd_pcm]
[ 108.941717] chrdev_open+0xc5/0x240
[ 108.941722] ? cdev_device_add+0x80/0x80
[ 108.941725] do_dentry_open+0x139/0x370
[ 108.941730] path_openat+0xaad/0xdd0
[ 108.941735] do_filp_open+0x9c/0x140
[ 108.941739] do_sys_openat2+0xac/0x160
[ 108.941742] __x64_sys_openat+0x51/0x90
[ 108.941746] do_syscall_64+0x33/0x40
[ 108.941751] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 108.941755] RIP: 0033:0x7ffbf1d7fbe7
[ 108.941759] Code: 25 00 00 41 00 3d 00 00 41 00 74 47 64 8b 04 25 18 00 00 00 85 c0 75 6b 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 95 00 00 00 48 8b 4c 24 28 64 48 2b 0c 25
[ 108.941762] RSP: 002b:00007ffe8430b930 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
[ 108.941766] RAX: ffffffffffffffda RBX: 0000000000080802 RCX: 00007ffbf1d7fbe7
[ 108.941769] RDX: 0000000000080802 RSI: 00007ffe8430baf0 RDI: 00000000ffffff9c
[ 108.941771] RBP: 00007ffe8430baf0 R08: 0000000000000000 R09: 0000000000000011
[ 108.941774] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000080802
[ 108.941776] R13: 0000000000000004 R14: 0000000000000001 R15: 00007ffe8430baf0
[ 108.941780] ---[ end trace 34e71a1f81a1c00a ]---
next prev parent reply other threads:[~2021-01-23 11:09 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-22 8:09 bisected regression in v5.11-rc1 snd-usb-audio Jamie Heilman
2021-01-22 8:44 ` Takashi Iwai
2021-01-22 10:03 ` Jamie Heilman
2021-01-22 11:58 ` Takashi Iwai
2021-01-23 11:08 ` Jamie Heilman [this message]
2021-01-23 12:42 ` Takashi Iwai
2021-01-23 22:40 ` Jamie Heilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YAwDkhRVkrEna8pV@audible.transient.net \
--to=jamie@audible.transient.net \
--cc=linux-kernel@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.