From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-12.7 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,FREEMAIL_FORGED_FROMDOMAIN,FREEMAIL_FROM, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id B667AC433E0 for ; Sun, 21 Feb 2021 05:53:24 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 5443864E57 for ; Sun, 21 Feb 2021 05:53:24 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231622AbhBUFxF (ORCPT ); Sun, 21 Feb 2021 00:53:05 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37498 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231592AbhBUFwq (ORCPT ); Sun, 21 Feb 2021 00:52:46 -0500 Received: from mail-pg1-x530.google.com (mail-pg1-x530.google.com [IPv6:2607:f8b0:4864:20::530]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 23F0BC061574; Sat, 20 Feb 2021 21:52:03 -0800 (PST) Received: by mail-pg1-x530.google.com with SMTP id o38so8055347pgm.9; Sat, 20 Feb 2021 21:52:03 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=date:from:to:cc:subject:message-id:references:mime-version :content-disposition:in-reply-to; bh=vJWArC77CQW9+bH7rSu32K1a7mm6mZv3uNz/lUh0dRw=; b=d7lpFZpFXJu9UL1e8r8epbgKvBadcvgDwjlgZlX7WsnHCgppL0BFPOapnyE9x2sZxM svnZoxS2F3h2smiGZlJGXgHGmpvt3S8BvjjWzYGcxn8VwH+VLDlGez+ITwRDANXB+EpF Nioz5D90nDT4dlP3XcGeg6LtipDuSXz5khDiNgjdU+Zr9eKc6pQJk5cm5yeYQuFIiAgI Scf+VZganoSCDI6SpDKVdR6jbwhTrcLjSvF9Zze+jTJ248+Xxe4e9X1GcgHbetny5uwa TnT3Z9+9i495dBASiKHjWpW2nAKrazYbSJfFUHeI3cYzX9kqNj6T6dAFoMRrfgoiO9d4 eKDw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=vJWArC77CQW9+bH7rSu32K1a7mm6mZv3uNz/lUh0dRw=; b=V8HG/TBR1f2ETjiU86D3ITfs6FiVUm/zj3GLuDistfSuhZXuPFXP2l+ZmsjSEc/tzy /WuLQyW9MuMMTFqaRAG/FdJ+RDWIC07WtK096vbcpCs/rsUi6oHfHuTnWUK6zXog67CT usgrNNlpTZvfKPIn3f7gILfclZOB66bH8pFuV+0OLOai6d0svgzX3KstFlliLEleEQjm IO/bAbUb7ng5EzYMwrLUjMQ5KSLobzJyDm6pgtEWoxKB9lcxkgRJMS4ZavgAQdw8Ov9b +mt0LBgmmHu2USfxpCbBgNoXKecoF+htnlVKRZFLmQtWWtWDMcyK4dz1uIwVXnhalNAf pHDg== X-Gm-Message-State: AOAM533qheVKjOAiWd3T5L9izN2tK0LWE1Kk3bGm4IdLtfPrTZxUglvy eS0gLv89mD2cbbbqKvQc81ys9oHQU+Q= X-Google-Smtp-Source: ABdhPJwD404gUQPX3y+9sMKijiTX8ZQhXwKFscja3pG1jnLCt4sq0kQo4OMZ0tk86LXuJ9mZsewxvw== X-Received: by 2002:a05:6a00:148a:b029:1ae:6d20:fbb3 with SMTP id v10-20020a056a00148ab02901ae6d20fbb3mr16271470pfu.55.1613886721959; Sat, 20 Feb 2021 21:52:01 -0800 (PST) Received: from google.com ([2620:15c:202:201:b993:3e9c:7cd5:5a8e]) by smtp.gmail.com with ESMTPSA id b15sm10042479pgg.85.2021.02.20.21.52.00 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 20 Feb 2021 21:52:00 -0800 (PST) Date: Sat, 20 Feb 2021 21:51:58 -0800 From: Dmitry Torokhov To: Joe Hung Cc: robh+dt@kernel.org, devicetree@vger.kernel.org, linux-input@vger.kernel.org, luca_hsu@ilitek.com Subject: Re: [PATCH v3 2/2] input: touchscreen: Add support for ILITEK Lego Series Message-ID: References: <20210218064435.1360483-1-joe_hung@ilitek.com> <20210218064435.1360483-2-joe_hung@ilitek.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20210218064435.1360483-2-joe_hung@ilitek.com> Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Hi Joe, On Thu, Feb 18, 2021 at 02:44:35PM +0800, Joe Hung wrote: > Add support for ILITEK Lego series of touch devices. > Lego series includes ILITEK 213X/2316/232X/252X. > Designed in compatible way for ILITEK 23XX/251X ICs. > > Tested and passed with evaluation board with ILI2520 IC. Thank you for your submission. > > Signed-off-by: Joe Hung > --- > Changes in v3: > - None > > Changes in v2: > - Remove irq-gpio and related flow > > drivers/input/touchscreen/Kconfig | 12 + > drivers/input/touchscreen/Makefile | 1 + > drivers/input/touchscreen/ilitek_ts_i2c.c | 1010 +++++++++++++++++++++ > 3 files changed, 1023 insertions(+) > create mode 100644 drivers/input/touchscreen/ilitek_ts_i2c.c > > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig > index f012fe746df0..9dea7fd0d94f 100644 > --- a/drivers/input/touchscreen/Kconfig > +++ b/drivers/input/touchscreen/Kconfig > @@ -1334,4 +1334,16 @@ config TOUCHSCREEN_ZINITIX > To compile this driver as a module, choose M here: the > module will be called zinitix. > > +config TOUCHSCREEN_ILITEK > + tristate "Ilitek I2C 23XX/25XX/Lego Series Touch ICs" > + depends on I2C > + help > + Say Y here if you have touchscreen with ILITEK touch IC, > + it supports 23XX/25XX/other Lego series. > + > + If unsure, say N. > + > + To compile this driver as a module, choose M here: the > + module will be called ilitek_ts_i2c. > + > endif > diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile > index 6233541e9173..6749bdc42f41 100644 > --- a/drivers/input/touchscreen/Makefile > +++ b/drivers/input/touchscreen/Makefile > @@ -112,3 +112,4 @@ obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023) += rohm_bu21023.o > obj-$(CONFIG_TOUCHSCREEN_RASPBERRYPI_FW) += raspberrypi-ts.o > obj-$(CONFIG_TOUCHSCREEN_IQS5XX) += iqs5xx.o > obj-$(CONFIG_TOUCHSCREEN_ZINITIX) += zinitix.o > +obj-$(CONFIG_TOUCHSCREEN_ILITEK) += ilitek_ts_i2c.o > diff --git a/drivers/input/touchscreen/ilitek_ts_i2c.c b/drivers/input/touchscreen/ilitek_ts_i2c.c > new file mode 100644 > index 000000000000..72cb7c82170c > --- /dev/null > +++ b/drivers/input/touchscreen/ilitek_ts_i2c.c > @@ -0,0 +1,1010 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * ILITEK Touch IC driver for 23XX, 25XX and Lego series > + * > + * Copyright (C) 2011 ILI Technology Corporation. > + * Copyright (C) 2020 Luca Hsu > + * Copyright (C) 2021 Joe Hung > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include Are you sure you need this include? > +#include > +#include > +#include > +#include You do not create character devices in this driver. > +#include > +#include Why do you need this include? > +#include I do not think this driver uses rtc. > +#include > +#include > +#include > +#include > +#include I do not think your driver uses runtime PM. > +#include > +#include > +#include Please double-check that you include only facilities that the driver actually uses. > + > +#define ILITEK_TS_NAME "ilitek_ts" > +#define BL_V1_8 (0x10800) > +#define BL_V1_7 (0x10700) > +#define BL_V1_6 (0x10600) > + > +#define ILITEK_TP_CMD_GET_TP_RES (0x20) > +#define ILITEK_TP_CMD_GET_SCRN_RES (0x21) > +#define ILITEK_TP_CMD_GET_KEY_INFO (0x22) > +#define ILITEK_TP_CMD_GET_FW_VER (0x40) > +#define ILITEK_TP_CMD_GET_PRL_VER (0x42) > +#define ILITEK_TP_CMD_GET_MCU_VER (0x61) > +#define ILITEK_TP_CMD_GET_IC_MODE (0xC0) > + > +#define REPORT_ADDRESS_COUNT (61) > +#define ILITEK_SUPPORT_MAX_POINT (40) > +#define ILITEK_SUPPORT_MAX_KEY_CNT (50) No need to use parenthesis for simple scalar values. > + > +#define CEIL(n, d) (((n) % (d)) ? ((n) / (d) + 1) : ((n) / (d))) I think you want standard DIV_ROUND_UP(). > + > +struct ilitek_protocol_info { Let's use ili23xx instead of ilitek prefix throughout the file. Or whatever the first generation of the product supported by this driver. > + s32 ver; > + u8 ver_major; > + u8 ver_mid; > + u8 ver_minor; > +}; > + > +struct ilitek_key_info { > + s32 id; > + s32 x; > + s32 y; > + s32 status; > +}; > + > +struct ilitek_touch_info { > + u16 id; > + u16 x; > + u16 y; > + u16 p; > + u16 w; > + u16 h; > + u16 status; > +}; > + > +struct ilitek_ts_data { > + struct i2c_client *client; > + struct gpio_desc *reset_gpio; > + struct input_dev *input_dev; > + > + struct mutex ilitek_mutex; > + spinlock_t irq_lock; > + bool irq_status; > + int (*process_and_report)(struct ilitek_ts_data *ilitek_data); > + > + struct PROTOCOL_MAP *ptl_cb_func; > + struct ilitek_protocol_info ptl; > + > + > + struct ilitek_key_info keyinfo[ILITEK_SUPPORT_MAX_KEY_CNT]; > + struct ilitek_touch_info tpinfo[ILITEK_SUPPORT_MAX_POINT]; > + > + bool is_touched; > + bool touch_key_hold_press; > + > + bool ilitek_repeat_start; > + > + char product_id[30]; > + u8 mcu_ver[2]; > + u8 ic_mode; > + u8 firmware_ver[8]; > + > + s32 reset_time; > + s32 tp_max_x; > + s32 tp_max_y; > + s32 screen_max_x; > + s32 screen_max_y; > + s32 screen_min_x; > + s32 screen_min_y; > + s32 max_tp; > + s32 x_ch; > + s32 y_ch; > + s32 slave_count; What is the importance of this? > + s32 format; > + s32 keycount; > + s32 key_xlen; > + s32 key_ylen; > +}; > + > +enum ilitek_cmds_v6 { > + GET_PTL_VER = 0, > + GET_FW_VER, > + GET_SCRN_RES, > + GET_TP_RES, > + GET_IC_MODE, > + GET_MCU_VER, > + GET_KEY_INFO, > + > + MAX_CMD_CNT /* ALWAYS keep at the end */ > +}; > + > +typedef int protocol_func(struct ilitek_ts_data *ilitek_data, > + u16 cmd, uint8_t *inbuf, uint8_t *outbuf); In kernel please use u8 instead of uint8_t, etc. > + > +struct PROTOCOL_MAP { > + u16 cmd; > + const char *name; > + protocol_func *func; > +}; > + > +/* ILITEK I2C R/W APIs */ > +static int ilitek_i2c_transfer(struct i2c_client *client, > + struct i2c_msg *msgs, int cnt) > +{ > + int ret = 0, retry = 4; > + > + while (retry--) { > + ret = i2c_transfer(client->adapter, msgs, cnt); > + if (ret >= 0) > + break; > + mdelay(20); > + } Why does it this device need retries? > + > + return ret; > +} > + > +static int ilitek_i2c_write_and_read(struct ilitek_ts_data *ilitek_data, > + u8 *cmd, int write_len, int delay, > + u8 *data, int read_len) > +{ > + int ret = 0; > + struct i2c_client *client = ilitek_data->client; > + struct i2c_msg msgs[2] = { > + {.addr = client->addr, .flags = 0, > + .len = write_len, .buf = cmd,}, > + {.addr = client->addr, .flags = I2C_M_RD, > + .len = read_len, .buf = data,} > + }; > + > + if (ilitek_data->ilitek_repeat_start && delay == 0 && Where is this being set? As far as I understand, repeated start is property of the i2c controller, not peripheral device. Also, please see if you can switch to using regmap, as it should take care of selecting right mode, depending on controller's capabilities. > + write_len > 0 && read_len > 0) { > + ret = ilitek_i2c_transfer(client, msgs, 2); > + if (ret < 0) > + return ret; > + } else { > + if (write_len > 0) { > + ret = ilitek_i2c_transfer(client, msgs, 1); > + if (ret < 0) > + return ret; > + } > + if (delay > 0) > + mdelay(delay); > + if (read_len > 0) { > + ret = ilitek_i2c_transfer(client, msgs + 1, 1); > + if (ret < 0) > + return ret; > + } > + } > + > + return 0; > +} > + > +static void ilitek_irq_enable(struct ilitek_ts_data *ilitek_data) > +{ > + unsigned long irqflag = 0; > + > + spin_lock_irqsave(&ilitek_data->irq_lock, irqflag); > + if (!ilitek_data->irq_status) { > + enable_irq(ilitek_data->client->irq); > + ilitek_data->irq_status = true; > + } > + spin_unlock_irqrestore(&ilitek_data->irq_lock, irqflag); The driver should know at any time whether interrupts are disabled or not, so I'd prefer if we did not have this wrapper, and the one below. > +} > + > +static void ilitek_irq_disable(struct ilitek_ts_data *ilitek_data) > +{ > + unsigned long irqflag = 0; > + > + spin_lock_irqsave(&ilitek_data->irq_lock, irqflag); > + if (ilitek_data->irq_status) { > + disable_irq_nosync(ilitek_data->client->irq); > + ilitek_data->irq_status = false; > + } > + spin_unlock_irqrestore(&ilitek_data->irq_lock, irqflag); > +} > + > +/* ILITEK ISR APIs */ > +static void ilitek_key_down(struct ilitek_ts_data *ilitek_data, > + int x, int y) > +{ > + int j = 0; > + int x_min; > + int x_max; > + int y_min; > + int y_max; > + > + for (j = 0; j < ilitek_data->keycount; j++) { > + x_min = ilitek_data->keyinfo[j].x; > + x_max = ilitek_data->keyinfo[j].x + ilitek_data->key_xlen; > + y_min = ilitek_data->keyinfo[j].y; > + y_max = ilitek_data->keyinfo[j].y + ilitek_data->key_ylen; > + > + if (x >= x_min && x <= x_max && y >= y_min && y <= y_max) { > + input_report_key(ilitek_data->input_dev, > + ilitek_data->keyinfo[j].id, 1); > + > + ilitek_data->keyinfo[j].status = 1; > + ilitek_data->touch_key_hold_press = true; > + ilitek_data->is_touched = true; > + break; > + } > + } > +} This sounds like handling of "soft keys" which is better left for userspace. OTOH the Linux keycode seems to be coming from controller firmware. This is really weird. > + > +static int ilitek_key_release(struct ilitek_ts_data *ilitek_data, > + int x, int y, bool check_point) > +{ > + int j = 0; > + int x_min; > + int x_max; > + int y_min; > + int y_max; > + > + for (j = 0; j < ilitek_data->keycount; j++) { > + x_min = ilitek_data->keyinfo[j].x; > + x_max = ilitek_data->keyinfo[j].x + ilitek_data->key_xlen; > + y_min = ilitek_data->keyinfo[j].y; > + y_max = ilitek_data->keyinfo[j].y + ilitek_data->key_ylen; > + > + if (ilitek_data->keyinfo[j].status == 1) { > + if (!check_point || > + (x < x_min || x > x_max || > + y < y_min || y > y_max)) { > + input_report_key(ilitek_data->input_dev, > + ilitek_data->keyinfo[j].id, 0); > + ilitek_data->keyinfo[j].status = 0; > + ilitek_data->touch_key_hold_press = false; > + } > + } > + } > + return 0; > +} > + > +static void ilitek_touch_down(struct ilitek_ts_data *ilitek_data, > + int id, int x, int y, int p, int h, int w) > +{ > + struct input_dev *input = ilitek_data->input_dev; > + > + input_report_key(input, BTN_TOUCH, 1); > + > + input_mt_slot(input, id); > + input_mt_report_slot_state(input, MT_TOOL_FINGER, true); > + > + input_event(input, EV_ABS, ABS_MT_POSITION_X, x); > + input_event(input, EV_ABS, ABS_MT_POSITION_Y, y); > + > + input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, h); > + input_event(input, EV_ABS, ABS_MT_WIDTH_MAJOR, w); > + > + ilitek_data->tpinfo[id].status = 1; > + ilitek_data->tpinfo[id].id = id; > + ilitek_data->tpinfo[id].x = x; > + ilitek_data->tpinfo[id].y = y; > + ilitek_data->tpinfo[id].p = p; > + ilitek_data->tpinfo[id].h = h; > + ilitek_data->tpinfo[id].w = w; > + ilitek_data->is_touched = true; > +} > + > +static void ilitek_touch_release(struct ilitek_ts_data *ilitek_data, int id) > +{ > + struct input_dev *input = ilitek_data->input_dev; > + > + if (ilitek_data->tpinfo[id].status == 1) { > + input_mt_slot(input, id); > + input_mt_report_slot_state(input, MT_TOOL_FINGER, false); > + ilitek_data->tpinfo[id].status = 0; > + } > +} > + > +static void ilitek_touch_release_all(struct ilitek_ts_data *ilitek_data) > +{ > + struct input_dev *input = ilitek_data->input_dev; > + int i = 0; > + > + for (i = 0; i < ilitek_data->max_tp; i++) > + ilitek_touch_release(ilitek_data, i); > + input_report_key(input, BTN_TOUCH, 0); > + input_sync(input); > + > + ilitek_data->is_touched = false; > +} > + > +static int ilitek_process_and_report_v6(struct ilitek_ts_data *ilitek_data) > +{ > + int ret = 0; > + u8 buf[512] = {0}; > + int packet_len = 5; > + int packet_max_point = 10; > + int report_max_point = 6; > + int release_point = 0; > + int i = 0, count = 0; > + struct input_dev *input = ilitek_data->input_dev; > + struct device *dev = &ilitek_data->client->dev; > + u16 x, y, p = 10, w = 10, h = 10, status, id; > + > + ret = ilitek_i2c_write_and_read(ilitek_data, NULL, 0, 0, buf, 64); > + if (ret < 0) { > + dev_err(dev, "get touch info failed, err:%d\n", ret); > + goto err_release_touch_and_key; > + } > + > + report_max_point = buf[REPORT_ADDRESS_COUNT]; > + if (report_max_point > ilitek_data->max_tp) { > + dev_err(dev, "FW report max point:%d > panel info. max:%d\n", > + report_max_point, ilitek_data->max_tp); > + return -EINVAL; > + } > + > + count = CEIL(report_max_point, packet_max_point); > + for (i = 1; i < count; i++) { > + ret = ilitek_i2c_write_and_read(ilitek_data, NULL, 0, 0, > + buf + i * 64, 64); > + if (ret < 0) { > + dev_err(dev, "get touch info. err, count=%d\n", count); > + goto err_release_touch_and_key; > + } > + } This means you have 1 + count transactions on i2c bus. Have you considered reading max number of bytes in one transaction, and then soft out how much of received data is valid? > + > + for (i = 0; i < report_max_point; i++) { > + status = buf[i * packet_len + 1] & 0x40; > + id = buf[i * packet_len + 1] & 0x3F; > + > + if (!status) { > + release_point++; > + ilitek_touch_release(ilitek_data, id); > + continue; > + } > + > + x = (buf[i * packet_len + 3] << 8) + buf[i * packet_len + 2]; > + y = (buf[i * packet_len + 5] << 8) + buf[i * packet_len + 4]; x = le16_to_cpup(....); Please adjust here and elsewhere. Also, if data may be unaligned, please use get_unaligned_le16() instead. > + > + if (!ilitek_data->is_touched) > + ilitek_key_down(ilitek_data, x, y); > + > + if (!ilitek_data->touch_key_hold_press) { > + if (x > ilitek_data->screen_max_x || > + y > ilitek_data->screen_max_y || > + x < ilitek_data->screen_min_x || > + y < ilitek_data->screen_min_y) > + continue; > + > + ilitek_touch_down(ilitek_data, id, x, y, p, h, w); > + } else { > + ilitek_key_release(ilitek_data, x, y, 1); > + } > + } > + > + if (release_point == report_max_point) { > + ilitek_touch_release_all(ilitek_data); > + ilitek_key_release(ilitek_data, 0, 0, 0); > + ilitek_data->is_touched = false; > + } > + input_sync(input); > + return 0; > + > +err_release_touch_and_key: > + ilitek_touch_release_all(ilitek_data); > + ilitek_key_release(ilitek_data, 0, 0, 0); > + ilitek_data->is_touched = false; > + input_sync(input); > + return ret; > +} > + > + > +/* APIs of cmds for ILITEK Touch IC */ > +static int api_protocol_set_cmd(struct ilitek_ts_data *ilitek_data, > + u16 idx, u8 *inbuf, u8 *outbuf) > +{ > + u16 cmd; > + int ret = 0; > + > + if (!ilitek_data || !ilitek_data->ptl_cb_func) > + return -EINVAL; > + > + if (idx >= MAX_CMD_CNT) > + return -EINVAL; > + > + cmd = ilitek_data->ptl_cb_func[idx].cmd; > + ret = ilitek_data->ptl_cb_func[idx].func(ilitek_data, cmd, > + inbuf, outbuf); > + if (ret < 0) > + return ret; > + > + return 0; > +} > + > +static int api_protocol_get_ptl_ver(struct ilitek_ts_data *ilitek_data, > + u16 cmd, u8 *inbuf, u8 *outbuf) > +{ > + int ret = 0; > + u8 buf[64] = {0}; > + > + if (!ilitek_data) > + return -EINVAL; > + > + buf[0] = cmd; > + ret = ilitek_i2c_write_and_read(ilitek_data, buf, 1, 5, outbuf, 3); > + if (ret < 0) > + return ret; > + > + ilitek_data->ptl.ver = (outbuf[0] << 16) + (outbuf[1] << 8); > + ilitek_data->ptl.ver_major = outbuf[0]; > + ilitek_data->ptl.ver_mid = outbuf[1]; > + ilitek_data->ptl.ver_minor = outbuf[2]; > + > + return ret; > +} > + > +static int api_protocol_get_mcu_ver(struct ilitek_ts_data *ilitek_data, > + u16 cmd, u8 *inbuf, u8 *outbuf) > +{ > + int ret = 0; > + u8 buf[64] = {0}; > + > + if (!ilitek_data) > + return -EINVAL; > + > + buf[0] = ILITEK_TP_CMD_GET_MCU_VER; > + ret = ilitek_i2c_write_and_read(ilitek_data, buf, 1, 5, outbuf, 32); > + if (ret < 0) > + return ret; > + > + memcpy(ilitek_data->mcu_ver, outbuf, 2); > + memset(ilitek_data->product_id, 0, sizeof(ilitek_data->product_id)); > + memcpy(ilitek_data->product_id, outbuf+6, 26); > + > + return ret; > +} > + > +static int api_protocol_get_fw_ver(struct ilitek_ts_data *ilitek_data, > + u16 cmd, u8 *inbuf, u8 *outbuf) > +{ > + int ret = 0; > + u8 buf[64] = {0}; > + > + if (!ilitek_data) > + return -EINVAL; > + > + buf[0] = ILITEK_TP_CMD_GET_FW_VER; > + ret = ilitek_i2c_write_and_read(ilitek_data, buf, 1, 5, outbuf, 8); > + if (ret < 0) > + return ret; > + > + memcpy(ilitek_data->firmware_ver, outbuf, 8); > + > + return ret; > +} > + > +static int api_protocol_get_scrn_res(struct ilitek_ts_data *ilitek_data, > + u16 cmd, u8 *inbuf, u8 *outbuf) > +{ > + int ret = 0; > + u8 buf[64] = {0}; > + > + if (!ilitek_data) > + return -EINVAL; > + > + buf[0] = ILITEK_TP_CMD_GET_SCRN_RES; > + ret = ilitek_i2c_write_and_read(ilitek_data, buf, 1, 5, outbuf, 8); > + if (ret < 0) > + return ret; > + > + ilitek_data->screen_min_x = (outbuf[1] << 8) + outbuf[0]; > + ilitek_data->screen_min_y = (outbuf[3] << 8) + outbuf[2]; > + ilitek_data->screen_max_x = (outbuf[5] << 8) + outbuf[4]; > + ilitek_data->screen_max_y = (outbuf[7] << 8) + outbuf[6]; > + > + return ret; > +} > + > +static int api_protocol_get_key_info_v6(struct ilitek_ts_data *ilitek_data, > + u16 cmd, u8 *inbuf, u8 *outbuf) > +{ > + int ret = 0, i = 0; > + u8 buf[64] = {0}; > + > + if (!ilitek_data) > + return -EINVAL; > + > + if (ilitek_data->keycount > ILITEK_SUPPORT_MAX_KEY_CNT) > + return -EINVAL; > + > + buf[0] = ILITEK_TP_CMD_GET_KEY_INFO; > + ret = ilitek_i2c_write_and_read(ilitek_data, buf, 1, 10, > + outbuf, ilitek_data->keycount * 5 + 5); > + if (ret < 0) > + return ret; > + > + ilitek_data->key_xlen = (outbuf[2] << 8) + outbuf[1]; > + ilitek_data->key_ylen = (outbuf[4] << 8) + outbuf[3]; > + > + for (i = 0; i < ilitek_data->keycount; i++) { > + ilitek_data->keyinfo[i].id = outbuf[i * 5 + 5]; > + ilitek_data->keyinfo[i].x = (outbuf[i * 5 + 7] << 8) + > + outbuf[i * 5 + 6]; > + ilitek_data->keyinfo[i].y = (outbuf[i * 5 + 9] << 8) + > + outbuf[i * 5 + 8]; > + ilitek_data->keyinfo[i].status = 0; > + } > + > + return ret; > +} > + > +static int api_protocol_get_tp_res_v6(struct ilitek_ts_data *ilitek_data, > + u16 cmd, u8 *inbuf, u8 *outbuf) > +{ > + int ret = 0; > + u8 buf[64] = {0}; > + > + if (!ilitek_data) > + return -EINVAL; > + > + buf[0] = ILITEK_TP_CMD_GET_TP_RES; > + ret = ilitek_i2c_write_and_read(ilitek_data, buf, 1, 5, outbuf, 15); > + if (ret < 0) > + return ret; > + > + ilitek_data->tp_max_x = (outbuf[1] << 8) + outbuf[0]; > + ilitek_data->tp_max_y = (outbuf[3] << 8) + outbuf[2]; > + ilitek_data->x_ch = (outbuf[5] << 8) + outbuf[4]; > + ilitek_data->y_ch = (outbuf[7] << 8) + outbuf[6]; > + ilitek_data->max_tp = outbuf[8]; > + ilitek_data->keycount = outbuf[9]; > + ilitek_data->slave_count = outbuf[10]; > + ilitek_data->format = outbuf[12]; > + > + if (ilitek_data->keycount > ILITEK_SUPPORT_MAX_KEY_CNT) { > + dev_err(&ilitek_data->client->dev, "Invalid KEY count:%d from FW\n", > + ilitek_data->keycount); > + return -EINVAL; > + } > + > + if (ilitek_data->keycount > 0) { > + ret = api_protocol_set_cmd(ilitek_data, GET_KEY_INFO, > + NULL, outbuf); > + if (ret < 0) > + return ret; > + } > + > + if (ilitek_data->max_tp > ILITEK_SUPPORT_MAX_POINT) { > + dev_err(&ilitek_data->client->dev, "Invalid MAX_TP:%d from FW\n", > + ilitek_data->max_tp); > + return -EINVAL; > + } > + > + return ret; > +} > + > +static int api_protocol_get_ic_mode(struct ilitek_ts_data *ilitek_data, > + u16 cmd, u8 *inbuf, u8 *outbuf) > +{ > + int ret = 0; > + u8 buf[64] = {0}; > + > + if (!ilitek_data) > + return -EINVAL; > + > + buf[0] = ILITEK_TP_CMD_GET_IC_MODE; > + ret = ilitek_i2c_write_and_read(ilitek_data, buf, 1, 5, outbuf, 2); > + if (ret < 0) > + return ret; > + > + ilitek_data->ic_mode = outbuf[0]; > + return ret; > +} > + > +struct PROTOCOL_MAP ptl_func_map_v3[] = { > + { /* V3 cmds */}, > +}; > + > +struct PROTOCOL_MAP ptl_func_map_v6[] = { > + [GET_PTL_VER] = {ILITEK_TP_CMD_GET_PRL_VER, "GET_PTL_VER", > + api_protocol_get_ptl_ver}, > + [GET_FW_VER] = {ILITEK_TP_CMD_GET_FW_VER, "GET_FW_VER", > + api_protocol_get_fw_ver}, > + [GET_SCRN_RES] = {ILITEK_TP_CMD_GET_SCRN_RES, "GET_SCRN_RES", > + api_protocol_get_scrn_res}, > + [GET_TP_RES] = {ILITEK_TP_CMD_GET_TP_RES, "GET_TP_RES", > + api_protocol_get_tp_res_v6}, > + [GET_IC_MODE] = {ILITEK_TP_CMD_GET_IC_MODE, "GET_IC_MODE", > + api_protocol_get_ic_mode}, > + [GET_MCU_VER] = {ILITEK_TP_CMD_GET_MCU_VER, "GET_MOD_NAME", > + api_protocol_get_mcu_ver}, > + [GET_KEY_INFO] = {ILITEK_TP_CMD_GET_KEY_INFO, "GET_KEY_INFO", > + api_protocol_get_key_info_v6}, > +}; > + > +/* Probe APIs */ > +static int ilitek_request_gpio(struct device *dev, > + struct ilitek_ts_data *ilitek_data) > +{ > + int ret = 0; > + > + if (!dev || !ilitek_data) > + return -EINVAL; > + > + ilitek_data->reset_gpio = gpiod_get(dev, "reset", GPIOD_OUT_HIGH); > + if (IS_ERR(ilitek_data->reset_gpio)) { > + ret = PTR_ERR(ilitek_data->reset_gpio); > + return ret; > + } > + > + return 0; > +} > + > +static void ilitek_reset(struct ilitek_ts_data *ilitek_data, > + int delay, bool boot) > +{ > + bool init_stats = ilitek_data->irq_status; > + > + if (!boot) > + ilitek_irq_disable(ilitek_data); > + > + if (ilitek_data->reset_gpio) { > + gpiod_set_value(ilitek_data->reset_gpio, 1); > + mdelay(10); > + > + gpiod_set_value(ilitek_data->reset_gpio, 0); > + mdelay(10); > + > + gpiod_set_value(ilitek_data->reset_gpio, 1); > + mdelay(delay); I do not believe you mean to leave reset line activei here. Remember, gpiod is logical API, with 1 representing line being active, and 0 - inactive. gpiolib internally takes into account line polarity, so for active-low GPIOs gpiod_set_value(gpio, 1) will drive the line low. > + } > + > + if (!boot && init_stats) > + ilitek_irq_enable(ilitek_data); > +} > + > +static int ilitek_protocol_init(struct ilitek_ts_data *ilitek_data) > +{ > + int ret = 0; > + u8 outbuf[64] = {0}; > + > + if (!ilitek_data) > + return -EINVAL; How can it be NULL? > + > + ilitek_data->ptl_cb_func = ptl_func_map_v6; > + > + ret = api_protocol_set_cmd(ilitek_data, GET_PTL_VER, NULL, outbuf); > + if (ret < 0) > + return ret; > + > + if (ilitek_data->ptl.ver_major == 0x3 || > + ilitek_data->ptl.ver == BL_V1_6 || > + ilitek_data->ptl.ver == BL_V1_7) { > + ilitek_data->process_and_report = NULL; > + ilitek_data->ptl_cb_func = NULL; > + ilitek_data->reset_time = 200; > + } else { > + ilitek_data->process_and_report = ilitek_process_and_report_v6; > + ilitek_data->ptl_cb_func = ptl_func_map_v6; > + ilitek_data->reset_time = 600; > + } > + > + return 0; > +} > + > +static int ilitek_read_tp_info(struct ilitek_ts_data *ilitek_data, bool boot) > +{ > + u8 outbuf[256] = {0}; > + > + if (api_protocol_set_cmd(ilitek_data, GET_PTL_VER, NULL, outbuf) < 0) > + return -EFAULT; > + if (api_protocol_set_cmd(ilitek_data, GET_MCU_VER, NULL, outbuf) < 0) > + return -EFAULT; > + if (api_protocol_set_cmd(ilitek_data, GET_FW_VER, NULL, outbuf) < 0) > + return -EFAULT; > + if (boot && api_protocol_set_cmd(ilitek_data, GET_SCRN_RES, NULL, > + outbuf) < 0) > + return -EFAULT; > + if (api_protocol_set_cmd(ilitek_data, GET_TP_RES, NULL, outbuf) < 0) > + return -EFAULT; > + if (api_protocol_set_cmd(ilitek_data, GET_IC_MODE, NULL, outbuf) < 0) > + return -EFAULT; EFAULT is weird error code to be used here, maybe EIO or EINVAL? > + > + return 0; > +} > + > +static int ilitek_input_dev_init(struct device *dev, > + struct ilitek_ts_data *ilitek_data) > +{ > + int ret = 0, i = 0; > + struct input_dev *input = NULL; > + > + if (!dev || !ilitek_data) > + return -EINVAL; How can either these 2 be NULL? > + > + input = input_allocate_device(); > + if (!input) > + return -ENOMEM; > + > + input->name = ILITEK_TS_NAME; > + input->id.bustype = BUS_I2C; > + > + __set_bit(INPUT_PROP_DIRECT, input->propbit); > + input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); > + input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); > + > + input_set_abs_params(input, ABS_MT_POSITION_X, > + ilitek_data->screen_min_x, > + ilitek_data->screen_max_x, 0, 0); > + input_set_abs_params(input, ABS_MT_POSITION_Y, > + ilitek_data->screen_min_y, > + ilitek_data->screen_max_y, 0, 0); > + input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); > + input_set_abs_params(input, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0); Please support common touchscreen properties by using touchscreen_parse_properties() and then touchscreen_set_mt_pos() and/or touchscreen_report_pos() when reporting contacts. > + > + input_mt_init_slots(input, ilitek_data->max_tp, INPUT_MT_DIRECT); This needs error handling. > + > + for (i = 0; i < ilitek_data->keycount; i++) > + set_bit(ilitek_data->keyinfo[i].id & KEY_MAX, input->keybit); As I mentioned, soft keys are better handled in userspace. > + > + ret = input_register_device(input); > + if (ret) > + dev_err(dev, "failed to register input device, err:%d\n", ret); > + > + ilitek_data->input_dev = input; > + return ret; > +} > + > +static irqreturn_t ilitek_i2c_isr(int irq, void *dev_id) > +{ > + struct ilitek_ts_data *ilitek_data = dev_id; > + int ret = 0; > + > + if (!ilitek_data->process_and_report) { > + dev_err(&ilitek_data->client->dev, "report touch cb is NULL\n"); How can this happen? > + return IRQ_NONE; > + } > + > + ilitek_irq_disable(ilitek_data); You are in the interrupt handler, why do you need to disable interrupts? Current one will not be acknowledged until you return from ISR. > + mutex_lock(&ilitek_data->ilitek_mutex); What does this mutex protect? > + ret = ilitek_data->process_and_report(ilitek_data); > + mutex_unlock(&ilitek_data->ilitek_mutex); > + ilitek_irq_enable(ilitek_data); > + > + if (ret < 0) { > + dev_err(&ilitek_data->client->dev, "process and report point failed, err:%d\n", > + ret); > + return IRQ_NONE; > + } > + > + return IRQ_HANDLED; > +} > + > +static int ilitek_request_irq(struct device *dev, > + struct ilitek_ts_data *ilitek_data) > +{ > + int ret = 0; > + > + spin_lock_init(&ilitek_data->irq_lock); > + ilitek_data->irq_status = true; > + > + ret = request_threaded_irq(ilitek_data->client->irq, NULL, > + ilitek_i2c_isr, > + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, Please reply on platform (ACPI, DT, etc) to set up proper trigger for the interrupt line. Additionally, you should prefer having level interrupt, rather than edge, or you risk missing interrupts. > + "ilitek_touch_irq", ilitek_data); > + if (ret) > + dev_err(dev, "request threaded irq failed, err:%d\n", ret); I am not sure what is the value of this wrapper. > + > + return ret; > +} > + > +static ssize_t firmware_version_show(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct ilitek_ts_data *ilitek_data = i2c_get_clientdata(client); > + int ret = 0; > + u8 outbuf[64] = {0}; > + > + ilitek_irq_disable(ilitek_data); > + mutex_lock(&ilitek_data->ilitek_mutex); > + ret = api_protocol_set_cmd(ilitek_data, GET_FW_VER, NULL, outbuf); Do you need to query this all the time? Is it possible to collect this data at boot or after firmware flash and store for subsequent use? > + mutex_unlock(&ilitek_data->ilitek_mutex); > + ilitek_irq_enable(ilitek_data); > + > + if (ret < 0) { > + dev_err(dev, "api set cmd failed, err:%d\n", ret); > + return ret; > + } > + > + return scnprintf(buf, PAGE_SIZE, > + "ILITEK FW ver: %d.%d.%d.%d.%d.%d.%d.%d\n", > + ilitek_data->firmware_ver[0], > + ilitek_data->firmware_ver[1], > + ilitek_data->firmware_ver[2], > + ilitek_data->firmware_ver[3], > + ilitek_data->firmware_ver[4], > + ilitek_data->firmware_ver[5], > + ilitek_data->firmware_ver[6], > + ilitek_data->firmware_ver[7]); > +} > +static DEVICE_ATTR_RO(firmware_version); > + > +static ssize_t product_id_show(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct ilitek_ts_data *ilitek_data = i2c_get_clientdata(client); > + int ret = 0; > + u8 outbuf[64] = {0}; > + > + ilitek_irq_disable(ilitek_data); > + mutex_lock(&ilitek_data->ilitek_mutex); > + ret = api_protocol_set_cmd(ilitek_data, GET_MCU_VER, NULL, outbuf); > + mutex_unlock(&ilitek_data->ilitek_mutex); > + ilitek_irq_enable(ilitek_data); > + > + if (ret < 0) { > + dev_err(dev, "api set cmd failed, err:%d\n", ret); > + return ret; > + } > + > + return scnprintf(buf, PAGE_SIZE, "MCU: %s\n", ilitek_data->product_id); > +} > +static DEVICE_ATTR_RO(product_id); > + > +static struct attribute *ilitek_sysfs_attrs[] = { > + &dev_attr_firmware_version.attr, > + &dev_attr_product_id.attr, > + NULL > +}; > + > +static struct attribute_group ilitek_attrs_group[] = { > + {.attrs = ilitek_sysfs_attrs}, > +}; > + > +static int ilitek_create_sysfsnode(struct device *dev) > +{ > + int ret = 0; > + > + ret = sysfs_create_group(&dev->kobj, ilitek_attrs_group); > + if (ret) > + dev_err(dev, "sysfs create group failed, err:%d\n", ret); > + > + return ret; > +} > + > +static int ilitek_ts_i2c_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct ilitek_ts_data *ilitek_data = NULL; > + struct device *dev = &client->dev; > + int ret = 0; > + > + ilitek_data = kzalloc(sizeof(*ilitek_data), GFP_KERNEL); > + if (!ilitek_data) > + return -ENOMEM; Please use devm APIs to make sure resources are freed automatically after errors. It will also allow you to get rid of ilitek_ts_i2c_remove(). > + > + ilitek_data->client = client; > + i2c_set_clientdata(client, ilitek_data); > + > + mutex_init(&ilitek_data->ilitek_mutex); > + > + ret = ilitek_request_gpio(dev, ilitek_data); > + if (ret < 0) { > + dev_err(dev, "request gpio failed, err:%d", ret); > + goto err_put_gpiod; > + } > + > + ilitek_reset(ilitek_data, 1000, true); > + ret = ilitek_protocol_init(ilitek_data); > + if (ret < 0) { > + dev_err(dev, "protocol init failed, err:%d", ret); > + goto err_put_gpiod; > + } > + > + ret = ilitek_read_tp_info(ilitek_data, true); > + if (ret < 0) { > + dev_err(dev, "read tp info failed, err:%d", ret); > + goto err_put_gpiod; > + } > + > + ret = ilitek_input_dev_init(dev, ilitek_data); > + if (ret < 0) { > + dev_err(dev, "input dev init failed, err:%d", ret); > + goto err_free_input_dev; > + } > + > + ret = ilitek_request_irq(dev, ilitek_data); > + if (ret < 0) { > + dev_err(dev, "request irq failed, err:%d", ret); > + goto err_free_input_dev; > + } > + > + ret = ilitek_create_sysfsnode(dev); > + if (ret < 0) { > + dev_err(dev, "create sysfs node failed, err:%d", ret); > + goto err_free_irq; > + } > + > + return 0; > + > +err_free_irq: > + free_irq(ilitek_data->client->irq, ilitek_data); > + > + input_unregister_device(ilitek_data->input_dev); > +err_free_input_dev: > + if (ilitek_data->input_dev) > + input_free_device(ilitek_data->input_dev); > +err_put_gpiod: > + if (!IS_ERR(ilitek_data->reset_gpio)) > + gpiod_put(ilitek_data->reset_gpio); > + kfree(ilitek_data); > + return ret; > +} > + > +static int ilitek_ts_i2c_remove(struct i2c_client *client) > +{ > + struct device *dev = &client->dev; > + struct ilitek_ts_data *ilitek_data = i2c_get_clientdata(client); > + > + sysfs_remove_group(&dev->kobj, ilitek_attrs_group); > + > + free_irq(ilitek_data->client->irq, ilitek_data); > + > + input_unregister_device(ilitek_data->input_dev); > + > + if (!IS_ERR(ilitek_data->reset_gpio)) > + gpiod_put(ilitek_data->reset_gpio); > + > + kfree(ilitek_data); > + > + return 0; > +} > + > +static const struct i2c_device_id ilitek_ts_i2c_id[] = { > + {ILITEK_TS_NAME, 0}, > + { /* not omitted */ }, What does "not omitted" mean in this context? > +}; > +MODULE_DEVICE_TABLE(i2c, ilitek_ts_i2c_id); > + > +#ifdef CONFIG_ACPI > +static const struct acpi_device_id ilitekts_acpi_id[] = { > + { "ILTK0001", 0 }, > + { /* not omitted */ }, > +}; > +MODULE_DEVICE_TABLE(acpi, ilitekts_acpi_id); > +#endif > + > +#ifdef CONFIG_OF > +static const struct of_device_id ilitek_ts_i2c_match[] = { > + {.compatible = "ilitek,ili2520",}, > + {.compatible = "ilitek,ili2510",}, > + { /* not omitted */ }, > +}; > +MODULE_DEVICE_TABLE(of, ilitek_ts_i2c_match); > +#endif > + > +static struct i2c_driver ilitek_ts_i2c_driver = { > + .driver = { > + .name = ILITEK_TS_NAME, > + .owner = THIS_MODULE, No need to set owner. > + .of_match_table = of_match_ptr(ilitek_ts_i2c_match), > + .acpi_match_table = ACPI_PTR(ilitekts_acpi_id), You need power management (suspend/resume) handling too. > + }, > + .probe = ilitek_ts_i2c_probe, > + .remove = ilitek_ts_i2c_remove, > + .id_table = ilitek_ts_i2c_id, > +}; > + > +module_i2c_driver(ilitek_ts_i2c_driver); > + > +MODULE_AUTHOR("ILITEK"); > +MODULE_DESCRIPTION("ILITEK I2C Touchscreen Driver"); > +MODULE_LICENSE("GPL"); > -- > 2.25.1 > > Thanks. -- Dmitry