All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brian Foster <bfoster@redhat.com>
To: Allison Henderson <allison.henderson@oracle.com>
Cc: linux-xfs@vger.kernel.org
Subject: Re: [PATCH v15 09/22] xfs: Hoist xfs_attr_leaf_addname
Date: Thu, 25 Feb 2021 09:20:38 -0500	[thread overview]
Message-ID: <YDeyNkqPFz2OF/m4@bfoster> (raw)
In-Reply-To: <35e692d2-82f4-6513-0637-6509c05e9523@oracle.com>

On Wed, Feb 24, 2021 at 11:19:41PM -0700, Allison Henderson wrote:
> 
> 
> On 2/24/21 11:42 AM, Brian Foster wrote:
> > On Thu, Feb 18, 2021 at 09:53:35AM -0700, Allison Henderson wrote:
> > > This patch hoists xfs_attr_leaf_addname into the calling function.  The
> > > goal being to get all the code that will require state management into
> > > the same scope. This isn't particuarly asetheic right away, but it is a
> > > preliminary step to to manageing the state machine code.
> > > 
> > > Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
> > > ---
> > >   fs/xfs/libxfs/xfs_attr.c | 209 ++++++++++++++++++++++-------------------------
> > >   1 file changed, 96 insertions(+), 113 deletions(-)
> > > 
> > > diff --git a/fs/xfs/libxfs/xfs_attr.c b/fs/xfs/libxfs/xfs_attr.c
> > > index 19a532a..bfd4466 100644
> > > --- a/fs/xfs/libxfs/xfs_attr.c
> > > +++ b/fs/xfs/libxfs/xfs_attr.c
> > ...
> > > @@ -286,10 +287,101 @@ xfs_attr_set_args(
> > ...
> > >   			return error;
> > > +		xfs_attr3_leaf_remove(bp, args);
> > > +
> > > +		/*
> > > +		 * If the result is small enough, shrink it all into the inode.
> > > +		 */
> > > +		forkoff = xfs_attr_shortform_allfit(bp, dp);
> > > +		if (forkoff)
> > > +			error = xfs_attr3_leaf_to_shortform(bp, args, forkoff);
> > > +			/* bp is gone due to xfs_da_shrink_inode */
> > > +
> > > +		return error;
> > > +node:
> > 
> > Hmm, I'm not a fan of this unconditional return followed by a jump label
> > in the middle of the function. It's a pretty clear indication that this
> > is just two functions smashed together, so I'm not sure what the
> > advantage of this is. I'll continue on to see what falls out of the next
> > patches..
> > 
> > Brian
> 
> Yes, it does kinda look a little displaced, but the point of it is to bring
> code that will require state management into the same scope so that the
> state switch can span all the operations it affects.  Which seemed to be
> what the RFC was striving for?  Looking ahead at the other reviews, I think
> it came together for you?
> 

Yes, I think so. If the subsequent patches line everything up nicely in
that single switch statement in one place (which it looks like we're
pretty close to), then I can probably live with this transient quirk.
That said, I might wait until at least the attr set path looks pretty
much finalized and come back and take a last look at this one, if
nothing else just to think about if there's any simple/unintrusive way
to avoid it..

Brian

> Allison
> 
> > 
> > >   		/*
> > >   		 * Promote the attribute list to the Btree format.
> > >   		 */
> > > @@ -731,115 +823,6 @@ xfs_attr_leaf_try_add(
> > >   	return retval;
> > >   }
> > > -
> > > -/*
> > > - * Add a name to the leaf attribute list structure
> > > - *
> > > - * This leaf block cannot have a "remote" value, we only call this routine
> > > - * if bmap_one_block() says there is only one block (ie: no remote blks).
> > > - */
> > > -STATIC int
> > > -xfs_attr_leaf_addname(
> > > -	struct xfs_da_args	*args)
> > > -{
> > > -	int			error, forkoff;
> > > -	struct xfs_buf		*bp = NULL;
> > > -	struct xfs_inode	*dp = args->dp;
> > > -
> > > -	trace_xfs_attr_leaf_addname(args);
> > > -
> > > -	error = xfs_attr_leaf_try_add(args, bp);
> > > -	if (error)
> > > -		return error;
> > > -
> > > -	/*
> > > -	 * Commit the transaction that added the attr name so that
> > > -	 * later routines can manage their own transactions.
> > > -	 */
> > > -	error = xfs_trans_roll_inode(&args->trans, dp);
> > > -	if (error)
> > > -		return error;
> > > -
> > > -	/*
> > > -	 * If there was an out-of-line value, allocate the blocks we
> > > -	 * identified for its storage and copy the value.  This is done
> > > -	 * after we create the attribute so that we don't overflow the
> > > -	 * maximum size of a transaction and/or hit a deadlock.
> > > -	 */
> > > -	if (args->rmtblkno > 0) {
> > > -		error = xfs_attr_rmtval_set(args);
> > > -		if (error)
> > > -			return error;
> > > -	}
> > > -
> > > -	if (!(args->op_flags & XFS_DA_OP_RENAME)) {
> > > -		/*
> > > -		 * Added a "remote" value, just clear the incomplete flag.
> > > -		 */
> > > -		if (args->rmtblkno > 0)
> > > -			error = xfs_attr3_leaf_clearflag(args);
> > > -
> > > -		return error;
> > > -	}
> > > -
> > > -	/*
> > > -	 * If this is an atomic rename operation, we must "flip" the incomplete
> > > -	 * flags on the "new" and "old" attribute/value pairs so that one
> > > -	 * disappears and one appears atomically.  Then we must remove the "old"
> > > -	 * attribute/value pair.
> > > -	 *
> > > -	 * In a separate transaction, set the incomplete flag on the "old" attr
> > > -	 * and clear the incomplete flag on the "new" attr.
> > > -	 */
> > > -
> > > -	error = xfs_attr3_leaf_flipflags(args);
> > > -	if (error)
> > > -		return error;
> > > -	/*
> > > -	 * Commit the flag value change and start the next trans in series.
> > > -	 */
> > > -	error = xfs_trans_roll_inode(&args->trans, args->dp);
> > > -	if (error)
> > > -		return error;
> > > -
> > > -	/*
> > > -	 * Dismantle the "old" attribute/value pair by removing a "remote" value
> > > -	 * (if it exists).
> > > -	 */
> > > -	xfs_attr_restore_rmt_blk(args);
> > > -
> > > -	if (args->rmtblkno) {
> > > -		error = xfs_attr_rmtval_invalidate(args);
> > > -		if (error)
> > > -			return error;
> > > -
> > > -		error = xfs_attr_rmtval_remove(args);
> > > -		if (error)
> > > -			return error;
> > > -	}
> > > -
> > > -	/*
> > > -	 * Read in the block containing the "old" attr, then remove the "old"
> > > -	 * attr from that block (neat, huh!)
> > > -	 */
> > > -	error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno,
> > > -				   &bp);
> > > -	if (error)
> > > -		return error;
> > > -
> > > -	xfs_attr3_leaf_remove(bp, args);
> > > -
> > > -	/*
> > > -	 * If the result is small enough, shrink it all into the inode.
> > > -	 */
> > > -	forkoff = xfs_attr_shortform_allfit(bp, dp);
> > > -	if (forkoff)
> > > -		error = xfs_attr3_leaf_to_shortform(bp, args, forkoff);
> > > -		/* bp is gone due to xfs_da_shrink_inode */
> > > -
> > > -	return error;
> > > -}
> > > -
> > >   /*
> > >    * Return EEXIST if attr is found, or ENOATTR if not
> > >    */
> > > -- 
> > > 2.7.4
> > > 
> > 
> 


  reply	other threads:[~2021-02-25 14:22 UTC|newest]

Thread overview: 87+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-18 16:53 [PATCH v15 00/22] xfs: Delayed Attributes Allison Henderson
2021-02-18 16:53 ` [PATCH v15 01/22] xfs: Add helper xfs_attr_node_remove_step Allison Henderson
2021-02-24 15:03   ` Brian Foster
2021-02-25  6:17     ` Allison Henderson
2021-02-18 16:53 ` [PATCH v15 02/22] xfs: Add xfs_attr_node_remove_cleanup Allison Henderson
2021-02-24 15:03   ` Brian Foster
2021-02-25  6:17     ` Allison Henderson
2021-02-26  3:00   ` Darrick J. Wong
2021-02-27  0:48     ` Allison Henderson
2021-02-18 16:53 ` [PATCH v15 03/22] xfs: Hoist transaction handling in xfs_attr_node_remove_step Allison Henderson
2021-02-24 15:04   ` Brian Foster
2021-02-25  6:18     ` Allison Henderson
2021-02-26  3:02   ` Darrick J. Wong
2021-02-27  0:48     ` Allison Henderson
2021-02-18 16:53 ` [PATCH v15 04/22] xfs: Hoist xfs_attr_set_shortform Allison Henderson
2021-02-24 15:04   ` Brian Foster
2021-02-25  6:18     ` Allison Henderson
2021-02-26  3:03   ` Darrick J. Wong
2021-02-27  0:48     ` Allison Henderson
2021-02-18 16:53 ` [PATCH v15 05/22] xfs: Add helper xfs_attr_set_fmt Allison Henderson
2021-02-24 15:04   ` Brian Foster
2021-02-25  6:18     ` Allison Henderson
2021-02-26  3:07   ` Darrick J. Wong
2021-02-27  0:49     ` Allison Henderson
2021-02-18 16:53 ` [PATCH v15 06/22] xfs: Separate xfs_attr_node_addname and xfs_attr_node_addname_work Allison Henderson
2021-02-24 15:04   ` Brian Foster
2021-02-25  6:18     ` Allison Henderson
2021-02-26  4:02   ` Darrick J. Wong
2021-02-27  0:54     ` Allison Henderson
2021-03-01 18:00       ` Darrick J. Wong
2021-03-02  8:26         ` Allison Henderson
2021-02-18 16:53 ` [PATCH v15 07/22] xfs: Add helper xfs_attr_node_addname_find_attr Allison Henderson
2021-02-24 15:04   ` Brian Foster
2021-02-25  6:18     ` Allison Henderson
2021-02-26  4:06   ` Darrick J. Wong
2021-02-27  0:54     ` Allison Henderson
2021-02-18 16:53 ` [PATCH v15 08/22] xfs: Hoist xfs_attr_node_addname Allison Henderson
2021-02-24 18:42   ` Brian Foster
2021-02-25  6:19     ` Allison Henderson
2021-03-01 18:05   ` Darrick J. Wong
2021-03-02  8:26     ` Allison Henderson
2021-02-18 16:53 ` [PATCH v15 09/22] xfs: Hoist xfs_attr_leaf_addname Allison Henderson
2021-02-24 18:42   ` Brian Foster
2021-02-25  6:19     ` Allison Henderson
2021-02-25 14:20       ` Brian Foster [this message]
2021-03-01 18:19   ` Darrick J. Wong
2021-03-02  8:26     ` Allison Henderson
2021-02-18 16:53 ` [PATCH v15 10/22] xfs: Hoist node transaction handling Allison Henderson
2021-02-24 18:43   ` Brian Foster
2021-02-25  6:20     ` Allison Henderson
2021-03-01 18:20   ` Darrick J. Wong
2021-03-02  8:26     ` Allison Henderson
2021-02-18 16:53 ` [PATCH v15 11/22] xfs: Add delay ready attr remove routines Allison Henderson
2021-02-24 18:45   ` Brian Foster
2021-02-25  7:01     ` Allison Henderson
2021-02-25 14:22       ` Brian Foster
2021-02-25 22:28         ` Allison Henderson
2021-02-28 15:39           ` Brian Foster
2021-03-02  8:26             ` Allison Henderson
2021-02-18 16:53 ` [PATCH v15 12/22] xfs: Add delay ready attr set routines Allison Henderson
2021-03-02  1:39   ` Darrick J. Wong
2021-02-18 16:53 ` [PATCH v15 13/22] xfs: Add state machine tracepoints Allison Henderson
2021-02-26  5:06   ` Darrick J. Wong
2021-02-27  0:57     ` Allison Henderson
2021-02-18 16:53 ` [PATCH v15 14/22] xfs: Rename __xfs_attr_rmtval_remove Allison Henderson
2021-02-18 16:53 ` [PATCH v15 15/22] xfs: Handle krealloc errors in xlog_recover_add_to_cont_trans Allison Henderson
2021-02-26  5:06   ` Darrick J. Wong
2021-02-27  0:57     ` Allison Henderson
2021-02-18 16:53 ` [PATCH v15 16/22] xfs: Set up infastructure for deferred attribute operations Allison Henderson
2021-02-26  4:58   ` Darrick J. Wong
2021-02-27  0:56     ` Allison Henderson
2021-03-02  7:13       ` Allison Henderson
2021-03-03 11:50         ` Brian Foster
2021-02-18 16:53 ` [PATCH v15 17/22] xfs: Skip flip flags for delayed attrs Allison Henderson
2021-02-26  5:02   ` Darrick J. Wong
2021-02-27  0:56     ` Allison Henderson
2021-02-18 16:53 ` [PATCH v15 18/22] xfs: Add xfs_attr_set_deferred and xfs_attr_remove_deferred Allison Henderson
2021-02-26  5:00   ` Darrick J. Wong
2021-02-27  0:57     ` Allison Henderson
2021-02-18 16:53 ` [PATCH v15 19/22] xfs: Remove unused xfs_attr_*_args Allison Henderson
2021-02-26  4:58   ` Darrick J. Wong
2021-02-27  0:57     ` Allison Henderson
2021-02-18 16:53 ` [PATCH v15 20/22] xfs: Add delayed attributes error tag Allison Henderson
2021-02-18 16:53 ` [PATCH v15 21/22] xfs: Add delattr mount option Allison Henderson
2021-02-26  4:29   ` Darrick J. Wong
2021-02-27  0:55     ` Allison Henderson
2021-02-18 16:53 ` [PATCH v15 22/22] xfs: Merge xfs_delattr_context into xfs_attr_item Allison Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YDeyNkqPFz2OF/m4@bfoster \
    --to=bfoster@redhat.com \
    --cc=allison.henderson@oracle.com \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.