All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Zijlstra <peterz@infradead.org>
To: hpa@zytor.com
Cc: Steven Rostedt <rostedt@goodmis.org>,
	x86@kernel.org, linux-kernel@vger.kernel.org
Subject: Re: The killing of ideal_nops[]
Date: Wed, 10 Mar 2021 10:35:45 +0100	[thread overview]
Message-ID: <YEiS8Xws0tTFmMJp@hirez.programming.kicks-ass.net> (raw)
In-Reply-To: <YEiN+/Zp4uE/ISWD@hirez.programming.kicks-ass.net>

On Wed, Mar 10, 2021 at 10:14:35AM +0100, Peter Zijlstra wrote:
> Sure, but we can have one set on 32bit and another set on 64bit.

> Although I would use DS prefix nops for 32bit nop5/nop8 to keep them
> single instructions.
> 
> Then we can do away with runtime nop selection and special atomic nops
> and simplify things.
> 
> All this runtime faffing about nops is tedious and causes complications
> we can do without.

Something like so, except I think there's more cleanups possible.

(*completely* untested)

---
 arch/x86/include/asm/nops.h    | 176 ++++++++++++------------------------
 arch/x86/kernel/alternative.c  | 199 +++++------------------------------------
 arch/x86/kernel/ftrace.c       |   4 +-
 arch/x86/kernel/jump_label.c   |  21 +----
 arch/x86/kernel/kprobes/core.c |   2 +-
 arch/x86/kernel/setup.c        |   1 -
 arch/x86/kernel/static_call.c  |   4 +-
 arch/x86/net/bpf_jit_comp.c    |   8 +-
 8 files changed, 88 insertions(+), 327 deletions(-)

diff --git a/arch/x86/include/asm/nops.h b/arch/x86/include/asm/nops.h
index 12f12b5cf2ca..aec7b092d3dc 100644
--- a/arch/x86/include/asm/nops.h
+++ b/arch/x86/include/asm/nops.h
@@ -4,89 +4,58 @@
 
 /*
  * Define nops for use with alternative() and for tracing.
- *
- * *_NOP5_ATOMIC must be a single instruction.
  */
 
-#define NOP_DS_PREFIX 0x3e
+#ifndef CONFIG_64BIT
 
-/* generic versions from gas
-   1: nop
-   the following instructions are NOT nops in 64-bit mode,
-   for 64-bit mode use K8 or P6 nops instead
-   2: movl %esi,%esi
-   3: leal 0x00(%esi),%esi
-   4: leal 0x00(,%esi,1),%esi
-   6: leal 0x00000000(%esi),%esi
-   7: leal 0x00000000(,%esi,1),%esi
-*/
-#define GENERIC_NOP1 0x90
-#define GENERIC_NOP2 0x89,0xf6
-#define GENERIC_NOP3 0x8d,0x76,0x00
-#define GENERIC_NOP4 0x8d,0x74,0x26,0x00
-#define GENERIC_NOP5 GENERIC_NOP1,GENERIC_NOP4
-#define GENERIC_NOP6 0x8d,0xb6,0x00,0x00,0x00,0x00
-#define GENERIC_NOP7 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00
-#define GENERIC_NOP8 GENERIC_NOP1,GENERIC_NOP7
-#define GENERIC_NOP5_ATOMIC NOP_DS_PREFIX,GENERIC_NOP4
+/*
+ * Generic 32bit nops from GAS:
+ *
+ * 1: nop
+ * 2: movl %esi,%esi
+ * 3: leal 0x00(%esi),%esi
+ * 4: leal 0x00(,%esi,1),%esi
+ * 5: leal %ds:0x00(,%esi,1),%esi
+ * 6: leal 0x00000000(%esi),%esi
+ * 7: leal 0x00000000(,%esi,1),%esi
+ * 8: leal %ds:0x00000000(,%esi,1),%esi
+ *
+ * Except 5 and 8, which are DS prefixed 4 and 7 resp, where GAS would emit 2
+ * nop instructions.
+ */
+#define BYTES_NOP1	0x90
+#define BYTES_NOP2	0x89,0xf6
+#define BYTES_NOP3	0x8d,0x76,0x00
+#define BYTES_NOP4	0x8d,0x74,0x26,0x00
+#define BYTES_NOP5	0x3e,BYTES_NOP4
+#define BYTES_NOP6	0x8d,0xb6,0x00,0x00,0x00,0x00
+#define BYTES_NOP7	0x8d,0xb4,0x26,0x00,0x00,0x00,0x00
+#define BYTES_NOP8	0x3e,BYTES_NOP7
 
-/* Opteron 64bit nops
-   1: nop
-   2: osp nop
-   3: osp osp nop
-   4: osp osp osp nop
-*/
-#define K8_NOP1 GENERIC_NOP1
-#define K8_NOP2	0x66,K8_NOP1
-#define K8_NOP3	0x66,K8_NOP2
-#define K8_NOP4	0x66,K8_NOP3
-#define K8_NOP5	K8_NOP3,K8_NOP2
-#define K8_NOP6	K8_NOP3,K8_NOP3
-#define K8_NOP7	K8_NOP4,K8_NOP3
-#define K8_NOP8	K8_NOP4,K8_NOP4
-#define K8_NOP5_ATOMIC 0x66,K8_NOP4
+#else
 
-/* K7 nops
-   uses eax dependencies (arbitrary choice)
-   1: nop
-   2: movl %eax,%eax
-   3: leal (,%eax,1),%eax
-   4: leal 0x00(,%eax,1),%eax
-   6: leal 0x00000000(%eax),%eax
-   7: leal 0x00000000(,%eax,1),%eax
-*/
-#define K7_NOP1	GENERIC_NOP1
-#define K7_NOP2	0x8b,0xc0
-#define K7_NOP3	0x8d,0x04,0x20
-#define K7_NOP4	0x8d,0x44,0x20,0x00
-#define K7_NOP5	K7_NOP4,K7_NOP1
-#define K7_NOP6	0x8d,0x80,0,0,0,0
-#define K7_NOP7	0x8D,0x04,0x05,0,0,0,0
-#define K7_NOP8	K7_NOP7,K7_NOP1
-#define K7_NOP5_ATOMIC NOP_DS_PREFIX,K7_NOP4
+/*
+ * Generic 64bit nops from GAS:
+ *
+ * 1: nop
+ * 2: osp nop
+ * 3: nopl (%eax)
+ * 4: nopl 0x00(%eax)
+ * 5: nopl 0x00(%eax,%eax,1)
+ * 6: osp nopl 0x00(%eax,%eax,1)
+ * 7: nopl 0x00000000(%eax)
+ * 8: nopl 0x00000000(%eax,%eax,1)
+ */
+#define BYTES_NOP1	0x90
+#define BYTES_NOP2	0x66,0x90
+#define BYTES_NOP3	0x0f,0x1f,0x00
+#define BYTES_NOP4	0x0f,0x1f,0x40,0
+#define BYTES_NOP5	0x0f,0x1f,0x44,0x00,0
+#define BYTES_NOP6	0x66,0x0f,0x1f,0x44,0x00,0
+#define BYTES_NOP7	0x0f,0x1f,0x80,0,0,0,0
+#define BYTES_NOP8	0x0f,0x1f,0x84,0x00,0,0,0,0
 
-/* P6 nops
-   uses eax dependencies (Intel-recommended choice)
-   1: nop
-   2: osp nop
-   3: nopl (%eax)
-   4: nopl 0x00(%eax)
-   5: nopl 0x00(%eax,%eax,1)
-   6: osp nopl 0x00(%eax,%eax,1)
-   7: nopl 0x00000000(%eax)
-   8: nopl 0x00000000(%eax,%eax,1)
-   Note: All the above are assumed to be a single instruction.
-	There is kernel code that depends on this.
-*/
-#define P6_NOP1	GENERIC_NOP1
-#define P6_NOP2	0x66,0x90
-#define P6_NOP3	0x0f,0x1f,0x00
-#define P6_NOP4	0x0f,0x1f,0x40,0
-#define P6_NOP5	0x0f,0x1f,0x44,0x00,0
-#define P6_NOP6	0x66,0x0f,0x1f,0x44,0x00,0
-#define P6_NOP7	0x0f,0x1f,0x80,0,0,0,0
-#define P6_NOP8	0x0f,0x1f,0x84,0x00,0,0,0,0
-#define P6_NOP5_ATOMIC P6_NOP5
+#endif /* CONFIG_64BIT */
 
 #ifdef __ASSEMBLY__
 #define _ASM_MK_NOP(x) .byte x
@@ -94,54 +63,19 @@
 #define _ASM_MK_NOP(x) ".byte " __stringify(x) "\n"
 #endif
 
-#if defined(CONFIG_MK7)
-#define ASM_NOP1 _ASM_MK_NOP(K7_NOP1)
-#define ASM_NOP2 _ASM_MK_NOP(K7_NOP2)
-#define ASM_NOP3 _ASM_MK_NOP(K7_NOP3)
-#define ASM_NOP4 _ASM_MK_NOP(K7_NOP4)
-#define ASM_NOP5 _ASM_MK_NOP(K7_NOP5)
-#define ASM_NOP6 _ASM_MK_NOP(K7_NOP6)
-#define ASM_NOP7 _ASM_MK_NOP(K7_NOP7)
-#define ASM_NOP8 _ASM_MK_NOP(K7_NOP8)
-#define ASM_NOP5_ATOMIC _ASM_MK_NOP(K7_NOP5_ATOMIC)
-#elif defined(CONFIG_X86_P6_NOP)
-#define ASM_NOP1 _ASM_MK_NOP(P6_NOP1)
-#define ASM_NOP2 _ASM_MK_NOP(P6_NOP2)
-#define ASM_NOP3 _ASM_MK_NOP(P6_NOP3)
-#define ASM_NOP4 _ASM_MK_NOP(P6_NOP4)
-#define ASM_NOP5 _ASM_MK_NOP(P6_NOP5)
-#define ASM_NOP6 _ASM_MK_NOP(P6_NOP6)
-#define ASM_NOP7 _ASM_MK_NOP(P6_NOP7)
-#define ASM_NOP8 _ASM_MK_NOP(P6_NOP8)
-#define ASM_NOP5_ATOMIC _ASM_MK_NOP(P6_NOP5_ATOMIC)
-#elif defined(CONFIG_X86_64)
-#define ASM_NOP1 _ASM_MK_NOP(K8_NOP1)
-#define ASM_NOP2 _ASM_MK_NOP(K8_NOP2)
-#define ASM_NOP3 _ASM_MK_NOP(K8_NOP3)
-#define ASM_NOP4 _ASM_MK_NOP(K8_NOP4)
-#define ASM_NOP5 _ASM_MK_NOP(K8_NOP5)
-#define ASM_NOP6 _ASM_MK_NOP(K8_NOP6)
-#define ASM_NOP7 _ASM_MK_NOP(K8_NOP7)
-#define ASM_NOP8 _ASM_MK_NOP(K8_NOP8)
-#define ASM_NOP5_ATOMIC _ASM_MK_NOP(K8_NOP5_ATOMIC)
-#else
-#define ASM_NOP1 _ASM_MK_NOP(GENERIC_NOP1)
-#define ASM_NOP2 _ASM_MK_NOP(GENERIC_NOP2)
-#define ASM_NOP3 _ASM_MK_NOP(GENERIC_NOP3)
-#define ASM_NOP4 _ASM_MK_NOP(GENERIC_NOP4)
-#define ASM_NOP5 _ASM_MK_NOP(GENERIC_NOP5)
-#define ASM_NOP6 _ASM_MK_NOP(GENERIC_NOP6)
-#define ASM_NOP7 _ASM_MK_NOP(GENERIC_NOP7)
-#define ASM_NOP8 _ASM_MK_NOP(GENERIC_NOP8)
-#define ASM_NOP5_ATOMIC _ASM_MK_NOP(GENERIC_NOP5_ATOMIC)
-#endif
+#define ASM_NOP1 _ASM_MK_NOP(BYTES_NOP1)
+#define ASM_NOP2 _ASM_MK_NOP(BYTES_NOP2)
+#define ASM_NOP3 _ASM_MK_NOP(BYTES_NOP3)
+#define ASM_NOP4 _ASM_MK_NOP(BYTES_NOP4)
+#define ASM_NOP5 _ASM_MK_NOP(BYTES_NOP5)
+#define ASM_NOP6 _ASM_MK_NOP(BYTES_NOP6)
+#define ASM_NOP7 _ASM_MK_NOP(BYTES_NOP7)
+#define ASM_NOP8 _ASM_MK_NOP(BYTES_NOP8)
 
 #define ASM_NOP_MAX 8
-#define NOP_ATOMIC5 (ASM_NOP_MAX+1)	/* Entry for the 5-byte atomic NOP */
 
 #ifndef __ASSEMBLY__
-extern const unsigned char * const *ideal_nops;
-extern void arch_init_ideal_nops(void);
+extern const unsigned char * const *x86_nops;
 #endif
 
 #endif /* _ASM_X86_NOPS_H */
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 94649f86d653..7667ec9aa7eb 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -74,186 +74,31 @@ do {									\
 	}								\
 } while (0)
 
-/*
- * Each GENERIC_NOPX is of X bytes, and defined as an array of bytes
- * that correspond to that nop. Getting from one nop to the next, we
- * add to the array the offset that is equal to the sum of all sizes of
- * nops preceding the one we are after.
- *
- * Note: The GENERIC_NOP5_ATOMIC is at the end, as it breaks the
- * nice symmetry of sizes of the previous nops.
- */
-#if defined(GENERIC_NOP1) && !defined(CONFIG_X86_64)
-static const unsigned char intelnops[] =
+const unsigned char x86nops[] =
 {
-	GENERIC_NOP1,
-	GENERIC_NOP2,
-	GENERIC_NOP3,
-	GENERIC_NOP4,
-	GENERIC_NOP5,
-	GENERIC_NOP6,
-	GENERIC_NOP7,
-	GENERIC_NOP8,
-	GENERIC_NOP5_ATOMIC
-};
-static const unsigned char * const intel_nops[ASM_NOP_MAX+2] =
-{
-	NULL,
-	intelnops,
-	intelnops + 1,
-	intelnops + 1 + 2,
-	intelnops + 1 + 2 + 3,
-	intelnops + 1 + 2 + 3 + 4,
-	intelnops + 1 + 2 + 3 + 4 + 5,
-	intelnops + 1 + 2 + 3 + 4 + 5 + 6,
-	intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
-	intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8,
+	BYTES_NOP1,
+	BYTES_NOP2,
+	BYTES_NOP3,
+	BYTES_NOP4,
+	BYTES_NOP5,
+	BYTES_NOP6,
+	BYTES_NOP7,
+	BYTES_NOP8,
 };
-#endif
 
-#ifdef K8_NOP1
-static const unsigned char k8nops[] =
-{
-	K8_NOP1,
-	K8_NOP2,
-	K8_NOP3,
-	K8_NOP4,
-	K8_NOP5,
-	K8_NOP6,
-	K8_NOP7,
-	K8_NOP8,
-	K8_NOP5_ATOMIC
-};
-static const unsigned char * const k8_nops[ASM_NOP_MAX+2] =
-{
-	NULL,
-	k8nops,
-	k8nops + 1,
-	k8nops + 1 + 2,
-	k8nops + 1 + 2 + 3,
-	k8nops + 1 + 2 + 3 + 4,
-	k8nops + 1 + 2 + 3 + 4 + 5,
-	k8nops + 1 + 2 + 3 + 4 + 5 + 6,
-	k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
-	k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8,
-};
-#endif
-
-#if defined(K7_NOP1) && !defined(CONFIG_X86_64)
-static const unsigned char k7nops[] =
-{
-	K7_NOP1,
-	K7_NOP2,
-	K7_NOP3,
-	K7_NOP4,
-	K7_NOP5,
-	K7_NOP6,
-	K7_NOP7,
-	K7_NOP8,
-	K7_NOP5_ATOMIC
-};
-static const unsigned char * const k7_nops[ASM_NOP_MAX+2] =
-{
-	NULL,
-	k7nops,
-	k7nops + 1,
-	k7nops + 1 + 2,
-	k7nops + 1 + 2 + 3,
-	k7nops + 1 + 2 + 3 + 4,
-	k7nops + 1 + 2 + 3 + 4 + 5,
-	k7nops + 1 + 2 + 3 + 4 + 5 + 6,
-	k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
-	k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8,
-};
-#endif
-
-#ifdef P6_NOP1
-static const unsigned char p6nops[] =
-{
-	P6_NOP1,
-	P6_NOP2,
-	P6_NOP3,
-	P6_NOP4,
-	P6_NOP5,
-	P6_NOP6,
-	P6_NOP7,
-	P6_NOP8,
-	P6_NOP5_ATOMIC
-};
-static const unsigned char * const p6_nops[ASM_NOP_MAX+2] =
+const unsigned char * const x86_nops[ASM_NOP_MAX+2] =
 {
 	NULL,
-	p6nops,
-	p6nops + 1,
-	p6nops + 1 + 2,
-	p6nops + 1 + 2 + 3,
-	p6nops + 1 + 2 + 3 + 4,
-	p6nops + 1 + 2 + 3 + 4 + 5,
-	p6nops + 1 + 2 + 3 + 4 + 5 + 6,
-	p6nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
-	p6nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8,
+	x86nops,
+	x86nops + 1,
+	x86nops + 1 + 2,
+	x86nops + 1 + 2 + 3,
+	x86nops + 1 + 2 + 3 + 4,
+	x86nops + 1 + 2 + 3 + 4 + 5,
+	x86nops + 1 + 2 + 3 + 4 + 5 + 6,
+	x86nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+	x86nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8,
 };
-#endif
-
-/* Initialize these to a safe default */
-#ifdef CONFIG_X86_64
-const unsigned char * const *ideal_nops = p6_nops;
-#else
-const unsigned char * const *ideal_nops = intel_nops;
-#endif
-
-void __init arch_init_ideal_nops(void)
-{
-	switch (boot_cpu_data.x86_vendor) {
-	case X86_VENDOR_INTEL:
-		/*
-		 * Due to a decoder implementation quirk, some
-		 * specific Intel CPUs actually perform better with
-		 * the "k8_nops" than with the SDM-recommended NOPs.
-		 */
-		if (boot_cpu_data.x86 == 6 &&
-		    boot_cpu_data.x86_model >= 0x0f &&
-		    boot_cpu_data.x86_model != 0x1c &&
-		    boot_cpu_data.x86_model != 0x26 &&
-		    boot_cpu_data.x86_model != 0x27 &&
-		    boot_cpu_data.x86_model < 0x30) {
-			ideal_nops = k8_nops;
-		} else if (boot_cpu_has(X86_FEATURE_NOPL)) {
-			   ideal_nops = p6_nops;
-		} else {
-#ifdef CONFIG_X86_64
-			ideal_nops = k8_nops;
-#else
-			ideal_nops = intel_nops;
-#endif
-		}
-		break;
-
-	case X86_VENDOR_HYGON:
-		ideal_nops = p6_nops;
-		return;
-
-	case X86_VENDOR_AMD:
-		if (boot_cpu_data.x86 > 0xf) {
-			ideal_nops = p6_nops;
-			return;
-		}
-
-		fallthrough;
-
-	default:
-#ifdef CONFIG_X86_64
-		ideal_nops = k8_nops;
-#else
-		if (boot_cpu_has(X86_FEATURE_K8))
-			ideal_nops = k8_nops;
-		else if (boot_cpu_has(X86_FEATURE_K7))
-			ideal_nops = k7_nops;
-		else
-			ideal_nops = intel_nops;
-#endif
-	}
-}
 
 /* Use this to add nops to a buffer, then text_poke the whole buffer. */
 static void __init_or_module add_nops(void *insns, unsigned int len)
@@ -262,7 +107,7 @@ static void __init_or_module add_nops(void *insns, unsigned int len)
 		unsigned int noplen = len;
 		if (noplen > ASM_NOP_MAX)
 			noplen = ASM_NOP_MAX;
-		memcpy(insns, ideal_nops[noplen], noplen);
+		memcpy(insns, x86_nops[noplen], noplen);
 		insns += noplen;
 		len -= noplen;
 	}
@@ -1302,13 +1147,13 @@ static void text_poke_loc_init(struct text_poke_loc *tp, void *addr,
 	default: /* assume NOP */
 		switch (len) {
 		case 2: /* NOP2 -- emulate as JMP8+0 */
-			BUG_ON(memcmp(emulate, ideal_nops[len], len));
+			BUG_ON(memcmp(emulate, x86_nops[len], len));
 			tp->opcode = JMP8_INSN_OPCODE;
 			tp->rel32 = 0;
 			break;
 
 		case 5: /* NOP5 -- emulate as JMP32+0 */
-			BUG_ON(memcmp(emulate, ideal_nops[NOP_ATOMIC5], len));
+			BUG_ON(memcmp(emulate, x86_nops[len], len));
 			tp->opcode = JMP32_INSN_OPCODE;
 			tp->rel32 = 0;
 			break;
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 7edbd5ee5ed4..1b3ce3b4a2a2 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -66,7 +66,7 @@ int ftrace_arch_code_modify_post_process(void)
 
 static const char *ftrace_nop_replace(void)
 {
-	return ideal_nops[NOP_ATOMIC5];
+	return x86_nops[5];
 }
 
 static const char *ftrace_call_replace(unsigned long ip, unsigned long addr)
@@ -377,7 +377,7 @@ create_trampoline(struct ftrace_ops *ops, unsigned int *tramp_size)
 		ip = trampoline + (jmp_offset - start_offset);
 		if (WARN_ON(*(char *)ip != 0x75))
 			goto fail;
-		ret = copy_from_kernel_nofault(ip, ideal_nops[2], 2);
+		ret = copy_from_kernel_nofault(ip, x86_nops[2], 2);
 		if (ret < 0)
 			goto fail;
 	}
diff --git a/arch/x86/kernel/jump_label.c b/arch/x86/kernel/jump_label.c
index 5ba8477c2cb7..b728cdd47081 100644
--- a/arch/x86/kernel/jump_label.c
+++ b/arch/x86/kernel/jump_label.c
@@ -31,7 +31,6 @@ static const void *
 __jump_label_set_jump_code(struct jump_entry *entry, enum jump_label_type type, int init)
 {
 	const unsigned char default_nop[] = { STATIC_KEY_INIT_NOP };
-	const unsigned char *ideal_nop = ideal_nops[NOP_ATOMIC5];
 	const void *expect, *code;
 	const void *addr, *dest;
 	int line;
@@ -44,7 +43,7 @@ __jump_label_set_jump_code(struct jump_entry *entry, enum jump_label_type type,
 	if (init) {
 		expect = default_nop; line = __LINE__;
 	} else if (type == JUMP_LABEL_JMP) {
-		expect = ideal_nop; line = __LINE__;
+		expect = x86_nops[5]; line = __LINE__;
 	} else {
 		expect = code; line = __LINE__;
 	}
@@ -53,7 +52,7 @@ __jump_label_set_jump_code(struct jump_entry *entry, enum jump_label_type type,
 		bug_at(addr, line);
 
 	if (type == JUMP_LABEL_NOP)
-		code = ideal_nop;
+		code = x86_nops[5];
 
 	return code;
 }
@@ -136,22 +135,6 @@ static enum {
 __init_or_module void arch_jump_label_transform_static(struct jump_entry *entry,
 				      enum jump_label_type type)
 {
-	/*
-	 * This function is called at boot up and when modules are
-	 * first loaded. Check if the default nop, the one that is
-	 * inserted at compile time, is the ideal nop. If it is, then
-	 * we do not need to update the nop, and we can leave it as is.
-	 * If it is not, then we need to update the nop to the ideal nop.
-	 */
-	if (jlstate == JL_STATE_START) {
-		const unsigned char default_nop[] = { STATIC_KEY_INIT_NOP };
-		const unsigned char *ideal_nop = ideal_nops[NOP_ATOMIC5];
-
-		if (memcmp(ideal_nop, default_nop, 5) != 0)
-			jlstate = JL_STATE_UPDATE;
-		else
-			jlstate = JL_STATE_NO_UPDATE;
-	}
 	if (jlstate == JL_STATE_UPDATE)
 		jump_label_transform(entry, type, 1);
 }
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index df776cdca327..6356834928b9 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -229,7 +229,7 @@ __recover_probed_insn(kprobe_opcode_t *buf, unsigned long addr)
 		return 0UL;
 
 	if (faddr)
-		memcpy(buf, ideal_nops[NOP_ATOMIC5], 5);
+		memcpy(buf, x86_nops[5], 5);
 	else
 		buf[0] = kp->opcode;
 	return (unsigned long)buf;
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index d883176ef2ce..3b4b9b281545 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -822,7 +822,6 @@ void __init setup_arch(char **cmdline_p)
 
 	idt_setup_early_traps();
 	early_cpu_init();
-	arch_init_ideal_nops();
 	jump_label_init();
 	static_call_init();
 	early_ioremap_init();
diff --git a/arch/x86/kernel/static_call.c b/arch/x86/kernel/static_call.c
index 9442c4136c38..ea028e736831 100644
--- a/arch/x86/kernel/static_call.c
+++ b/arch/x86/kernel/static_call.c
@@ -34,7 +34,7 @@ static void __ref __static_call_transform(void *insn, enum insn_type type, void
 		break;
 
 	case NOP:
-		code = ideal_nops[NOP_ATOMIC5];
+		code = x86_nops[5];
 		break;
 
 	case JMP:
@@ -66,7 +66,7 @@ static void __static_call_validate(void *insn, bool tail)
 			return;
 	} else {
 		if (opcode == CALL_INSN_OPCODE ||
-		    !memcmp(insn, ideal_nops[NOP_ATOMIC5], 5) ||
+		    !memcmp(insn, x86_nops[5], 5) ||
 		    !memcmp(insn, xor5rax, 5))
 			return;
 	}
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 79e7a0ec1da5..6aa29c45c3f9 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -282,7 +282,7 @@ static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf,
 	/* BPF trampoline can be made to work without these nops,
 	 * but let's waste 5 bytes for now and optimize later
 	 */
-	memcpy(prog, ideal_nops[NOP_ATOMIC5], cnt);
+	memcpy(prog, x86_nops[5], cnt);
 	prog += cnt;
 	if (!ebpf_from_cbpf) {
 		if (tail_call_reachable && !is_subprog)
@@ -330,7 +330,7 @@ static int __bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t,
 				void *old_addr, void *new_addr,
 				const bool text_live)
 {
-	const u8 *nop_insn = ideal_nops[NOP_ATOMIC5];
+	const u8 *nop_insn = x86_nops[5];
 	u8 old_insn[X86_PATCH_SIZE];
 	u8 new_insn[X86_PATCH_SIZE];
 	u8 *prog;
@@ -560,7 +560,7 @@ static void emit_bpf_tail_call_direct(struct bpf_jit_poke_descriptor *poke,
 	if (stack_depth)
 		EMIT3_off32(0x48, 0x81, 0xC4, round_up(stack_depth, 8));
 
-	memcpy(prog, ideal_nops[NOP_ATOMIC5], X86_PATCH_SIZE);
+	memcpy(prog, x86_nops[5], X86_PATCH_SIZE);
 	prog += X86_PATCH_SIZE;
 	/* out: */
 
@@ -881,7 +881,7 @@ static int emit_nops(u8 **pprog, int len)
 			noplen = ASM_NOP_MAX;
 
 		for (i = 0; i < noplen; i++)
-			EMIT1(ideal_nops[noplen][i]);
+			EMIT1(x86_nops[noplen][i]);
 		len -= noplen;
 	}
 

  reply	other threads:[~2021-03-10  9:36 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-09 16:58 The killing of ideal_nops[] Peter Zijlstra
2021-03-09 17:05 ` Steven Rostedt
2021-03-09 21:24   ` Peter Zijlstra
2021-03-10  0:33     ` hpa
2021-03-10  9:14       ` Peter Zijlstra
2021-03-10  9:35         ` Peter Zijlstra [this message]
2021-03-10 10:03           ` Peter Zijlstra
2021-03-10 10:22             ` Peter Zijlstra
2021-03-10 14:13               ` Steven Rostedt
2021-03-10 14:24                 ` Peter Zijlstra
2021-03-10 14:30                   ` Peter Zijlstra
2021-03-10 15:48                   ` Alexei Starovoitov
2021-03-10 16:04                     ` Peter Zijlstra
2021-03-11  9:28                       ` David Laight
2021-03-14 22:43                       ` Maciej W. Rozycki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YEiS8Xws0tTFmMJp@hirez.programming.kicks-ass.net \
    --to=peterz@infradead.org \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rostedt@goodmis.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.