From: Jonathan Nieder <jrnieder@gmail.com>
To: Junio C Hamano <gitster@pobox.com>
Cc: git@vger.kernel.org,
Felipe Contreras <felipe.contreras@gmail.com>,
Seth House <seth@eseth.com>,
Dana Dahlstrom <dahlstrom@google.com>
Subject: Re: [PATCH] mergetool: do not enable hideResolved by default
Date: Fri, 12 Mar 2021 15:29:59 -0800 [thread overview]
Message-ID: <YEv5d0pGvEVpepoY@google.com> (raw)
In-Reply-To: <xmqqlfas55mk.fsf@gitster.g>
Junio C Hamano wrote:
> Junio C Hamano <gitster@pobox.com> writes:
> > Junio C Hamano <gitster@pobox.com> writes:
>>> As we want to disable the feature for any backend when the user does
>>> not explicitly say the feature is wanted (either in general, or for
>>> a specific backend), the change in the above hunk is exactly want we
>>> want to see.
>>>
>>> Looking good. Let's not revert the series and disable by default.
>>>
>>> Should I expect an updated log message, though?
[...]
>> For tonight's pushout, I'll use the patch as-is and merge it in
>> 'seen'.
>
> Any progress here?
Sorry for the delay. I should be able to send out an improved log
message (more concise and summarizing the supporting info from this
thread) later this afternoon.
Thanks,
Jonathan
next prev parent reply other threads:[~2021-03-12 23:30 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-23 4:53 [PATCH v5 0/1] mergetool: remove unconflicted lines Felipe Contreras
2020-12-23 4:53 ` [PATCH v5 1/1] mergetool: add automerge configuration Felipe Contreras
2020-12-23 13:34 ` Junio C Hamano
2020-12-23 14:23 ` Felipe Contreras
2020-12-23 20:21 ` Junio C Hamano
2020-12-24 0:14 ` Felipe Contreras
2020-12-24 0:32 ` Junio C Hamano
2020-12-24 1:36 ` Felipe Contreras
2020-12-24 6:17 ` Junio C Hamano
2020-12-24 15:59 ` Felipe Contreras
2020-12-24 22:32 ` Junio C Hamano
2020-12-27 18:01 ` Felipe Contreras
2020-12-24 9:24 ` [PATCH v5 0/1] mergetool: remove unconflicted lines Junio C Hamano
2020-12-24 16:16 ` Felipe Contreras
2020-12-30 5:47 ` Johannes Schindelin
2020-12-30 22:33 ` Felipe Contreras
2020-12-27 20:58 ` [PATCH v6 0/1] mergetool: add automerge configuration Seth House
2020-12-27 20:58 ` [PATCH v6 1/2] " Seth House
2020-12-27 22:06 ` Junio C Hamano
2020-12-27 22:29 ` Seth House
2020-12-27 22:59 ` Junio C Hamano
2020-12-27 20:58 ` [PATCH v6 2/2] mergetool: Add per-tool support for the autoMerge flag Seth House
2020-12-27 22:31 ` Junio C Hamano
2020-12-28 0:41 ` [PATCH v7 0/2] mergetool: add automerge configuration Seth House
2020-12-28 0:41 ` [PATCH v7 1/2] " Seth House
2020-12-28 0:41 ` [PATCH v7 2/2] mergetool: Add per-tool support for the autoMerge flag Seth House
2020-12-28 1:18 ` Felipe Contreras
2020-12-28 4:54 ` [PATCH v8 0/4] mergetool: add automerge configuration Seth House
2020-12-28 4:54 ` [PATCH v8 1/4] " Seth House
2020-12-28 11:30 ` Johannes Sixt
2020-12-28 4:54 ` [PATCH v8 2/4] mergetool: Add per-tool support for the autoMerge flag Seth House
2020-12-28 13:09 ` Junio C Hamano
2020-12-28 4:54 ` [PATCH v8 3/4] mergetool: Break setup_tool out into separate initialization function Seth House
2020-12-28 11:48 ` Johannes Sixt
2020-12-28 4:54 ` [PATCH v8 4/4] mergetool: Add automerge_enabled tool-specific override function Seth House
2020-12-28 11:57 ` Johannes Sixt
2020-12-28 13:19 ` Junio C Hamano
2020-12-28 19:29 ` [PATCH v9 0/5] mergetool: add automerge configuration Seth House
2020-12-28 19:29 ` [PATCH v9 1/5] " Seth House
2020-12-28 19:29 ` [PATCH v9 2/5] mergetool: alphabetize the mergetool config docs Seth House
2020-12-28 19:29 ` [PATCH v9 3/5] mergetool: add per-tool support for the autoMerge flag Seth House
2020-12-28 19:29 ` [PATCH v9 4/5] mergetool: break setup_tool out into separate initialization function Seth House
2020-12-29 8:50 ` Johannes Sixt
2020-12-29 17:23 ` Seth House
2020-12-28 19:29 ` [PATCH v9 5/5] mergetool: add automerge_enabled tool-specific override function Seth House
2020-12-29 2:01 ` Felipe Contreras
2021-01-06 5:55 ` Junio C Hamano
2021-01-07 3:58 ` Seth House
2021-01-07 6:38 ` Junio C Hamano
2021-01-07 9:27 ` Seth House
2021-01-07 21:26 ` Junio C Hamano
2021-01-08 15:04 ` Johannes Schindelin
2021-01-30 5:46 ` [PATCH v10 0/3] mergetool: add hideResolved configuration (was automerge) Seth House
2021-01-30 5:46 ` [PATCH v10 1/3] mergetool: add hideResolved configuration Seth House
2021-01-30 8:08 ` Junio C Hamano
2021-01-30 5:46 ` [PATCH v10 2/3] mergetool: break setup_tool out into separate initialization function Seth House
2021-01-30 5:46 ` [PATCH v10 3/3] mergetool: add per-tool support and overrides for the hideResolved flag Seth House
2021-01-30 8:08 ` Junio C Hamano
2021-02-09 20:07 ` [PATCH v11 0/3] mergetool: add hideResolved configuration (was automerge) Seth House
2021-02-09 20:07 ` [PATCH v11 1/3] mergetool: add hideResolved configuration Seth House
2021-03-09 2:29 ` [PATCH] mergetool: do not enable hideResolved by default Jonathan Nieder
2021-03-09 5:42 ` Seth House
2021-03-10 1:23 ` Jonathan Nieder
2021-03-10 8:06 ` Junio C Hamano
2021-03-11 1:57 ` Junio C Hamano
2021-03-12 23:12 ` Junio C Hamano
2021-03-12 23:29 ` Jonathan Nieder [this message]
2021-03-12 23:36 ` Junio C Hamano
2021-03-13 8:36 ` [PATCH v2 0/2] " Jonathan Nieder
2021-03-13 8:38 ` [PATCH 1/2] " Jonathan Nieder
2021-03-13 8:41 ` [PATCH 2/2] doc: describe mergetool configuration in git-mergetool(1) Jonathan Nieder
2021-03-13 23:34 ` Junio C Hamano
2021-03-13 23:37 ` Junio C Hamano
2021-02-09 20:07 ` [PATCH v11 2/3] mergetool: break setup_tool out into separate initialization function Seth House
2021-02-09 20:07 ` [PATCH v11 3/3] mergetool: add per-tool support and overrides for the hideResolved flag Seth House
2021-02-09 22:11 ` [PATCH v11 0/3] mergetool: add hideResolved configuration (was automerge) Junio C Hamano
2021-02-09 23:27 ` Seth House
2020-12-28 10:29 ` [PATCH v7 0/2] mergetool: add automerge configuration Junio C Hamano
2020-12-28 14:40 ` Felipe Contreras
2020-12-28 1:02 ` [PATCH v6 0/1] " Felipe Contreras
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YEv5d0pGvEVpepoY@google.com \
--to=jrnieder@gmail.com \
--cc=dahlstrom@google.com \
--cc=felipe.contreras@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=seth@eseth.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.