Re: [PATCH v4 1/2] usbip: tools: add options and examples in man page related to device mode

["Hongren Zheng (Zenithal)" <i@zenithal.me>]

On Tue, Mar 23, 2021 at 05:12:00PM -0600, Shuah Khan wrote:
> On 3/23/21 6:55 AM, Hongren Zheng (Zenithal) wrote:
> > The commit e0546fd8b748 ("usbip: tools: Start using VUDC backend in
> > usbip tools") implemented device mode for user space tools, however the
> > corresponding options are not documented in man page.
> > 
> > This commit documents the options and provides examples on device mode.
> > 
> > Signed-off-by: Hongren Zheng <i@zenithal.me>
> > ---
> >   tools/usb/usbip/doc/usbip.8  | 25 +++++++++++++++++++++++++
> >   tools/usb/usbip/doc/usbipd.8 | 22 ++++++++++++++++++++++
> >   2 files changed, 47 insertions(+)
> > 
> > PATCH v2:
> >      Add signed-off-by line
> > 
> > PATCH v3:
> >      Move patch changelog after the marker line
> >      Remove nickname in signed-off-by line
> > 
> > PATCH v4:
> >      Use commit short hash and message instead of long hash only when
> >        referring to commit in the kernel
> > 
> 
> Thank you for the patch. Please see comments below:
> 
> > diff --git a/tools/usb/usbip/doc/usbip.8 b/tools/usb/usbip/doc/usbip.8
> > index a15d20063b98..385b0eda8746 100644
> > --- a/tools/usb/usbip/doc/usbip.8
> > +++ b/tools/usb/usbip/doc/usbip.8
> > @@ -49,6 +49,13 @@ then exit.
> >   Attach a remote USB device.
> >   .PP
> > +.HP
> > +\fBattach\fR \-\-remote=<\fIhost\fR> \-\-device=<\fdev_id\fR>
> > +.IP
> > +Attach a remote USB gadget.
> > +Only used when the remote usbipd is in device mode.
> > +.PP
> > +
> >   .HP
> >   \fBdetach\fR \-\-port=<\fIport\fR>
> >   .IP
> 
> This is a bit confusing. Please add a separate section for
> Attach a remote USB gadget complete with attach and detach
> instructions.

The detaching of a USB device and a USB gadget share the same detach
command. You attach one USB device/gadget use either one of the
above attach commands, and when you need to detach one device/gadget,
you first need `usbip port` to show the port of imported device/gadget,
for example, 

client:# usbip port
Imported USB devices
====================
Port 00: <Port in Use> at High Speed(480Mbps)
       Netchip Technology, Inc. : Pocketbook Pro 903 / Mobius 2 Action Cam / xDuoo X3 / PocketBook Pro 602
       3-1 -> usbip://localhost:3240/usbip-vudc.0
           -> remote bus/dev 000/000


then use `usbip detach --port=0` to detach the device/gadget.
Since they share the same workflow for detaching, a separate section
may not be necessary.

Meanwhile, in the example below a detach command for device mode
can be added. With the example I think the complete flow for device
mode would be made clear enough.

I will send a new version of this patch with this command added in the
example, some description rephrased and typo fixed.

> 
> > @@ -73,6 +80,14 @@ Stop exporting a device so it can be used by a local driver.
> >   List USB devices exported by a remote host.
> >   .PP
> > +.HP
> > +\fBlist\fR \-\-device
> > +.IP
> > +List USB gadgets of local usbip-vudc.
> > +Only used when the local usbipd is in device mode.
> > +This can not list usbip-vudc USB gadgets of the remote device mode usbipd.
> > +.PP
> > +
> >   .HP
> >   \fBlist\fR \-\-local
> >   .IP
> > @@ -93,5 +108,15 @@ List local USB devices.
> >       client:# usbip detach --port=0
> >           - Detach the usb device.
> > +The following example shows the use of device mode
> > +
> > +    server:# usbip list --device
> > +        - Note this is the server side
> > +
> > +    client:# modprobe vhci-hcd
> > +
> > +    client:# usbip attach --remote=server --device=usbip-vudc.0
> > +        - Connect the remote USB gadget
> > +
> >   .SH "SEE ALSO"
> >   \fBusbipd\fP\fB(8)\fB\fP
> > diff --git a/tools/usb/usbip/doc/usbipd.8 b/tools/usb/usbip/doc/usbipd.8
> > index fb62a756893b..53c8d5792de6 100644
> > --- a/tools/usb/usbip/doc/usbipd.8
> > +++ b/tools/usb/usbip/doc/usbipd.8
> > @@ -29,6 +29,12 @@ Bind to IPv4. Default is both.
> >   Bind to IPv6. Default is both.
> >   .PP
> > +.HP
> > +\fB\-e\fR, \fB\-\-device\fR
> > +.IP
> > +Run in device mode. Rather than drive an attached device, create a virtual UDC to bind gadgets to.
> > +.PP
> > +
> >   .HP
> >   \fB\-D\fR, \fB\-\-daemon\fR
> >   .IP
> > @@ -86,6 +92,22 @@ USB/IP client can connect and use exported devices.
> >           - A usb device 1-2 is now exportable to other hosts!
> >           - Use 'usbip unbind --busid=1-2' when you want to shutdown exporting and use the device locally.
> > +The following example shows the use of device mode
> > +
> > +    server:# modprobe usbip-vudc
> > +        - Use /sys/class/udc/ interface
> > +        - usbip-host is independent of this module.
> > +
> > +    server:# usbipd -e -D
> > +        - Start usbip daemon in device mode.
> > +
> > +    server:# modprobe g_mass_storage file=/tmp/tmp.img
> > +        - Bind a gadget to usbip-vudc
> > +        - in this example, a mass storage gadget is bound
> > +
> > +    server:# usbip list --device
> > +        - Note this is the server side
> > +
> >   .SH "SEE ALSO"
> >   \fBusbip\fP\fB(8)\fB\fP
> > 
> 
> thanks,
> -- Shuah
>