All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pavel Balaev <balaevpa@infotecs.ru>
To: <netdev@vger.kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Jonathan Corbet <corbet@lwn.net>,
	Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>,
	David Ahern <dsahern@kernel.org>, Shuah Khan <shuah@kernel.org>,
	Christophe JAILLET <christophe.jaillet@wanadoo.fr>,
	<linux-doc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Ido Schimmel <idosch@nvidia.com>
Subject: [PATCH v6 net-next 1/3] net/ipv4: multipath routing: configurable seed
Date: Wed, 28 Apr 2021 15:31:33 +0300	[thread overview]
Message-ID: <YIlVpYMCn/8WfE1P@rnd> (raw)

Ability for a user to assign seed value to multipath route hashes.
Now kernel uses random seed value to prevent hash-flooding DoS attacks;
however, it disables some use cases, f.e:

+-------+        +------+        +--------+
|       |-eth0---| FW0  |---eth0-|        |
|       |        +------+        |        |
|  GW0  |ECMP                ECMP|  GW1   |
|       |        +------+        |        |
|       |-eth1---| FW1  |---eth1-|        |
+-------+        +------+        +--------+

In this use case, two ECMP routers balance traffic between two firewalls.
If some flow transmits a response over a different channel than request,
such flow will be dropped, because keep-state rules are created on
the other firewall.

This patch adds sysctl variable: net.ipv4.fib_multipath_hash_seed.
User can set the same seed value on GW0 and GW1 for traffic to be
mirror-balanced. By default, random value is used.

Signed-off-by: Pavel Balaev <balaevpa@infotecs.ru>
---
 Documentation/networking/ip-sysctl.rst | 14 ++++
 include/net/flow_dissector.h           |  2 +
 include/net/netns/ipv4.h               |  2 +
 net/core/flow_dissector.c              |  7 ++
 net/ipv4/route.c                       | 10 ++-
 net/ipv4/sysctl_net_ipv4.c             | 97 ++++++++++++++++++++++++++
 6 files changed, 131 insertions(+), 1 deletion(-)

diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst
index 9701906f6..d1a67e6fe 100644
--- a/Documentation/networking/ip-sysctl.rst
+++ b/Documentation/networking/ip-sysctl.rst
@@ -100,6 +100,20 @@ fib_multipath_hash_policy - INTEGER
 	- 1 - Layer 4
 	- 2 - Layer 3 or inner Layer 3 if present
 
+fib_multipath_hash_seed - STRING
+	Controls seed value for multipath route hashes. By default
+	random value is used. Only valid for kernels built with
+	CONFIG_IP_ROUTE_MULTIPATH enabled.
+
+	Valid format: two hex values set off with comma or "random"
+	keyword.
+
+	Example to generate the seed value::
+
+		RAND=$(openssl rand -hex 16) && echo "${RAND:0:16},${RAND:16:16}"
+
+	Default: "random"
+
 fib_sync_mem - UNSIGNED INTEGER
 	Amount of dirty memory from fib entries that can be backlogged before
 	synchronize_rcu is forced.
diff --git a/include/net/flow_dissector.h b/include/net/flow_dissector.h
index ffd386ea0..d104c013a 100644
--- a/include/net/flow_dissector.h
+++ b/include/net/flow_dissector.h
@@ -348,6 +348,8 @@ static inline bool flow_keys_have_l4(const struct flow_keys *keys)
 }
 
 u32 flow_hash_from_keys(struct flow_keys *keys);
+u32 flow_multipath_hash_from_keys(struct flow_keys *keys,
+			   const siphash_key_t *seed);
 void skb_flow_get_icmp_tci(const struct sk_buff *skb,
 			   struct flow_dissector_key_icmp *key_icmp,
 			   const void *data, int thoff, int hlen);
diff --git a/include/net/netns/ipv4.h b/include/net/netns/ipv4.h
index 87e161249..cb2830432 100644
--- a/include/net/netns/ipv4.h
+++ b/include/net/netns/ipv4.h
@@ -222,6 +222,8 @@ struct netns_ipv4 {
 #ifdef CONFIG_IP_ROUTE_MULTIPATH
 	u8 sysctl_fib_multipath_use_neigh;
 	u8 sysctl_fib_multipath_hash_policy;
+	int sysctl_fib_multipath_hash_seed;
+	siphash_key_t __rcu *fib_multipath_hash_seed_ctx;
 #endif
 
 	struct fib_notifier_ops	*notifier_ops;
diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c
index 5985029e4..febd1094c 100644
--- a/net/core/flow_dissector.c
+++ b/net/core/flow_dissector.c
@@ -1560,6 +1560,13 @@ u32 flow_hash_from_keys(struct flow_keys *keys)
 }
 EXPORT_SYMBOL(flow_hash_from_keys);
 
+u32 flow_multipath_hash_from_keys(struct flow_keys *keys,
+				  const siphash_key_t *seed)
+{
+	return __flow_hash_from_keys(keys, seed);
+}
+EXPORT_SYMBOL(flow_multipath_hash_from_keys);
+
 static inline u32 ___skb_get_hash(const struct sk_buff *skb,
 				  struct flow_keys *keys,
 				  const siphash_key_t *keyval)
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index f6787c55f..79866b429 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1912,6 +1912,7 @@ int fib_multipath_hash(const struct net *net, const struct flowi4 *fl4,
 {
 	u32 multipath_hash = fl4 ? fl4->flowi4_multipath_hash : 0;
 	struct flow_keys hash_keys;
+	siphash_key_t *seed_ctx;
 	u32 mhash;
 
 	switch (net->ipv4.sysctl_fib_multipath_hash_policy) {
@@ -1989,7 +1990,14 @@ int fib_multipath_hash(const struct net *net, const struct flowi4 *fl4,
 		}
 		break;
 	}
-	mhash = flow_hash_from_keys(&hash_keys);
+
+	rcu_read_lock();
+	seed_ctx = rcu_dereference(net->ipv4.fib_multipath_hash_seed_ctx);
+	if (seed_ctx)
+		mhash = flow_multipath_hash_from_keys(&hash_keys, seed_ctx);
+	else
+		mhash = flow_hash_from_keys(&hash_keys);
+	rcu_read_unlock();
 
 	if (multipath_hash)
 		mhash = jhash_2words(mhash, multipath_hash, 0);
diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c
index a09e466ce..5dff59733 100644
--- a/net/ipv4/sysctl_net_ipv4.c
+++ b/net/ipv4/sysctl_net_ipv4.c
@@ -447,6 +447,8 @@ static int proc_tcp_available_ulp(struct ctl_table *ctl,
 }
 
 #ifdef CONFIG_IP_ROUTE_MULTIPATH
+#define FIB_MULTIPATH_SEED_KEY_LENGTH sizeof(siphash_key_t)
+#define FIB_MULTIPATH_SEED_RANDOM "random"
 static int proc_fib_multipath_hash_policy(struct ctl_table *table, int write,
 					  void *buffer, size_t *lenp,
 					  loff_t *ppos)
@@ -461,6 +463,93 @@ static int proc_fib_multipath_hash_policy(struct ctl_table *table, int write,
 
 	return ret;
 }
+
+static int proc_fib_multipath_hash_seed(struct ctl_table *table, int write,
+					void *buffer, size_t *lenp,
+					loff_t *ppos)
+{
+	struct net *net = container_of(table->data, struct net,
+	    ipv4.sysctl_fib_multipath_hash_seed);
+	/* maxlen to print the keys in hex (*2) and a comma in between keys. */
+	struct ctl_table tbl = {
+		.maxlen = ((FIB_MULTIPATH_SEED_KEY_LENGTH * 2) + 2)
+	};
+	siphash_key_t user_key, *ctx;
+	__le64 key[2];
+	int ret;
+
+	tbl.data = kmalloc(tbl.maxlen, GFP_KERNEL);
+
+	if (!tbl.data)
+		return -ENOMEM;
+
+	rcu_read_lock();
+	ctx = rcu_dereference(net->ipv4.fib_multipath_hash_seed_ctx);
+	if (ctx) {
+		put_unaligned_le64(ctx->key[0], &key[0]);
+		put_unaligned_le64(ctx->key[1], &key[1]);
+		user_key.key[0] = le64_to_cpu(key[0]);
+		user_key.key[1] = le64_to_cpu(key[1]);
+
+		snprintf(tbl.data, tbl.maxlen, "%016llx,%016llx",
+			 user_key.key[0], user_key.key[1]);
+	} else {
+		snprintf(tbl.data, tbl.maxlen, "%s", FIB_MULTIPATH_SEED_RANDOM);
+	}
+	rcu_read_unlock();
+
+	ret = proc_dostring(&tbl, write, buffer, lenp, ppos);
+
+	if (write && ret == 0) {
+		siphash_key_t *new_ctx, *old_ctx;
+
+		if (!strcmp(tbl.data, FIB_MULTIPATH_SEED_RANDOM)) {
+			rtnl_lock();
+			old_ctx = rtnl_dereference(net->ipv4.fib_multipath_hash_seed_ctx);
+			RCU_INIT_POINTER(net->ipv4.fib_multipath_hash_seed_ctx, NULL);
+			rtnl_unlock();
+			if (old_ctx) {
+				synchronize_net();
+				kfree_sensitive(old_ctx);
+			}
+
+			pr_debug("multipath hash seed set to random value\n");
+			goto out;
+		}
+
+		if (sscanf(tbl.data, "%llx,%llx", user_key.key, user_key.key + 1) != 2) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		key[0] = cpu_to_le64(user_key.key[0]);
+		key[1] = cpu_to_le64(user_key.key[1]);
+		pr_debug("multipath hash seed set to 0x%llx,0x%llx\n",
+			 user_key.key[0], user_key.key[1]);
+
+		new_ctx = kmalloc(sizeof(*new_ctx), GFP_KERNEL);
+		if (!new_ctx) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		new_ctx->key[0] = get_unaligned_le64(&key[0]);
+		new_ctx->key[1] = get_unaligned_le64(&key[1]);
+
+		rtnl_lock();
+		old_ctx = rtnl_dereference(net->ipv4.fib_multipath_hash_seed_ctx);
+		rcu_assign_pointer(net->ipv4.fib_multipath_hash_seed_ctx, new_ctx);
+		rtnl_unlock();
+		if (old_ctx) {
+			synchronize_net();
+			kfree_sensitive(old_ctx);
+		}
+	}
+
+out:
+	kfree(tbl.data);
+	return ret;
+}
 #endif
 
 static struct ctl_table ipv4_table[] = {
@@ -1052,6 +1141,14 @@ static struct ctl_table ipv4_net_table[] = {
 		.extra1		= SYSCTL_ZERO,
 		.extra2		= &two,
 	},
+	{
+		.procname	= "fib_multipath_hash_seed",
+		.data		= &init_net.ipv4.sysctl_fib_multipath_hash_seed,
+		/* maxlen to print the keys in hex (*2) and a comma in between keys. */
+		.maxlen		= (FIB_MULTIPATH_SEED_KEY_LENGTH * 2) + 2,
+		.mode		= 0600,
+		.proc_handler	= proc_fib_multipath_hash_seed,
+	},
 #endif
 	{
 		.procname	= "ip_unprivileged_port_start",
-- 
2.31.1


             reply	other threads:[~2021-04-28 12:33 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-28 12:31 Pavel Balaev [this message]
2021-04-29 15:29 ` [PATCH v6 net-next 1/3] net/ipv4: multipath routing: configurable seed Ido Schimmel
2021-04-30 11:36   ` Pavel Balaev
2021-05-02  8:51     ` Ido Schimmel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YIlVpYMCn/8WfE1P@rnd \
    --to=balaevpa@infotecs.ru \
    --cc=christophe.jaillet@wanadoo.fr \
    --cc=corbet@lwn.net \
    --cc=davem@davemloft.net \
    --cc=dsahern@kernel.org \
    --cc=idosch@nvidia.com \
    --cc=kuba@kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=shuah@kernel.org \
    --cc=yoshfuji@linux-ipv6.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.