From: Greg KH <gregkh@linuxfoundation.org>
To: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Cc: linux-bluetooth@vger.kernel.org, stable@vger.kernel.org
Subject: Re: [PATCH 2/2] Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device.
Date: Fri, 28 May 2021 17:40:13 +0200 [thread overview]
Message-ID: <YLEO3THmResvvo2F@kroah.com> (raw)
In-Reply-To: <20210528152645.25577-2-joakim.tjernlund@infinera.com>
On Fri, May 28, 2021 at 05:26:45PM +0200, Joakim Tjernlund wrote:
> From: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
>
> T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=04 Dev#= 18 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0b05 ProdID=190e Rev= 2.00
> S: Manufacturer=Realtek
> S: Product=ASUS USB-BT500
> S: SerialNumber=xxxxxxxx
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
> ---
> drivers/bluetooth/btusb.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 5d603ef39bad..628f4b22cf69 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -425,6 +425,10 @@ static const struct usb_device_id blacklist_table[] = {
> { USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK },
> { USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK },
>
> + /* Additional Realtek 8761BU Bluetooth devices */
> + { USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK |
> + BTUSB_WIDEBAND_SPEECH },
> +
> /* Additional Realtek 8821AE Bluetooth devices */
> { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
> { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
> --
> 2.31.1
>
<formletter>
This is not the correct way to submit patches for inclusion in the
stable kernel tree. Please read:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.
</formletter>
next prev parent reply other threads:[~2021-05-28 15:40 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-28 15:26 [PATCH 1/2] Bluetooth: btrtl: rename USB fw for RTL8761 Joakim Tjernlund
2021-05-28 15:26 ` [PATCH 2/2] Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device Joakim Tjernlund
2021-05-28 15:40 ` Greg KH [this message]
2021-06-02 19:49 ` Marcel Holtmann
2021-05-28 15:40 ` [PATCH 1/2] Bluetooth: btrtl: rename USB fw for RTL8761 Greg KH
2021-05-28 16:31 ` [1/2] " bluez.test.bot
2021-06-02 19:50 ` [PATCH 1/2] " Marcel Holtmann
2021-05-28 16:46 Joakim Tjernlund
2021-05-28 16:46 ` [PATCH 2/2] Bluetooth: btusb: Add 0x0b05:0x190e Realtek 8761BU (ASUS BT500) device Joakim Tjernlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YLEO3THmResvvo2F@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=joakim.tjernlund@infinera.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.