All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
	robh@kernel.org
Cc: lorenzo.pieralisi@arm.com, bhelgaas@google.com,
	linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/3] dt-bindings: pci: Add devicetree binding for Qualcomm PCIe EP controller
Date: Sat, 5 Jun 2021 22:13:57 -0500	[thread overview]
Message-ID: <YLw9de/J7h5KZtHu@builder.lan> (raw)
In-Reply-To: <20210603103814.95177-2-manivannan.sadhasivam@linaro.org>

On Thu 03 Jun 05:38 CDT 2021, Manivannan Sadhasivam wrote:

> Add devicetree binding for Qualcomm PCIe EP controller used in platforms
> like SDX55. The EP controller is based on the Designware core with
> Qualcomm specific wrappers.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  .../devicetree/bindings/pci/qcom,pcie-ep.yaml | 144 ++++++++++++++++++
>  1 file changed, 144 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> new file mode 100644
> index 000000000000..3e357cb03a5c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> @@ -0,0 +1,144 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm PCIe Endpoint Controller binding
> +
> +maintainers:
> +  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> +
> +allOf:
> +  - $ref: "pci-ep.yaml#"
> +
> +properties:
> +  compatible:
> +    const: qcom,sdx55-pcie-ep

The binding looks good, but this is going to cause us an inevitable
warning as we'd have to describe the controller twice (rc + ep) in the
sdx55.dtsi.

@Rob, what do you suggest we do about this, because it's the same
problem currently responsible for hundreds of warnings in the case of
GENI (where each node is duplicated for different functions).

> +
> +  reg:
> +    items:
> +      - description: Qualcomm specific PARF configuration registers
> +      - description: Designware PCIe registers
> +      - description: External local bus interface registers
> +      - description: Address Translation Unit (ATU) registers
> +      - description: Memory region used to map remote RC address space
> +      - description: Qualcomm specific TCSR registers

tcsr is separate hardware block with "misc" registers, I think it's
better if we describe that as qcom,sdx55-tcsr, syscon and use the syscon
API to access those registers...

Regards,
Bjorn

> +
> +  reg-names:
> +    items:
> +      - const: parf
> +      - const: dbi
> +      - const: elbi
> +      - const: atu
> +      - const: addr_space
> +      - const: tcsr
> +
> +  clocks:
> +    items:
> +      - description: PCIe Auxiliary clock
> +      - description: PCIe CFG AHB clock
> +      - description: PCIe Master AXI clock
> +      - description: PCIe Slave AXI clock
> +      - description: PCIe Slave Q2A AXI clock
> +      - description: PCIe Sleep clock
> +      - description: PCIe Reference clock
> +
> +  clock-names:
> +    items:
> +      - const: aux
> +      - const: cfg
> +      - const: bus_master
> +      - const: bus_slave
> +      - const: slave_q2a
> +      - const: sleep
> +      - const: ref
> +
> +  interrupts:
> +    maxItems: 1
> +    description: PCIe Global interrupt
> +
> +  interrupt-names:
> +    const: global
> +
> +  reset-gpios:
> +    description: GPIO that is being used as PERST# input signal
> +    maxItems: 1
> +
> +  wake-gpios:
> +    description: GPIO that is being used as WAKE# output signal
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  reset-names:
> +    const: core
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  phys:
> +    maxItems: 1
> +
> +  phy-names:
> +    const: pciephy
> +
> +  num-lanes:
> +    default: 2
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - interrupt-names
> +  - reset-gpios
> +  - resets
> +  - reset-names
> +  - power-domains
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,gcc-sdx55.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    pcie_ep: pcie-ep@40000000 {
> +        compatible = "qcom,sdx55-pcie-ep";
> +        reg = <0x01c00000 0x3000>,
> +              <0x40000000 0xf1d>,
> +              <0x40000f20 0xc8>,
> +              <0x40001000 0x1000>,
> +              <0x42000000 0x1000>,
> +              <0x01fcb000 0x1000>;
> +        reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
> +                    "tcsr";
> +
> +        clocks = <&gcc GCC_PCIE_AUX_CLK>,
> +             <&gcc GCC_PCIE_CFG_AHB_CLK>,
> +             <&gcc GCC_PCIE_MSTR_AXI_CLK>,
> +             <&gcc GCC_PCIE_SLV_AXI_CLK>,
> +             <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
> +             <&gcc GCC_PCIE_SLEEP_CLK>,
> +             <&gcc GCC_PCIE_0_CLKREF_CLK>;
> +        clock-names = "aux", "cfg", "bus_master", "bus_slave",
> +                      "slave_q2a", "sleep", "ref";
> +
> +        interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-names = "global";
> +        reset-gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>;
> +        wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
> +        resets = <&gcc GCC_PCIE_BCR>;
> +        reset-names = "core";
> +        power-domains = <&gcc PCIE_GDSC>;
> +        phys = <&pcie0_lane>;
> +        phy-names = "pciephy";
> +        max-link-speed = <3>;
> +        num-lanes = <2>;
> +
> +        status = "disabled";
> +    };
> -- 
> 2.25.1
> 

  reply	other threads:[~2021-06-06  3:14 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-03 10:38 [PATCH v2 0/3] Add Qualcomm PCIe Endpoint driver support Manivannan Sadhasivam
2021-06-03 10:38 ` [PATCH v2 1/3] dt-bindings: pci: Add devicetree binding for Qualcomm PCIe EP controller Manivannan Sadhasivam
2021-06-06  3:13   ` Bjorn Andersson [this message]
2021-06-10 21:46     ` Rob Herring
2021-06-03 10:38 ` [PATCH v2 2/3] PCI: dwc: Add Qualcomm PCIe Endpoint controller driver Manivannan Sadhasivam
2021-06-05 22:02   ` Stanimir Varbanov
2021-06-09  5:20     ` Manivannan Sadhasivam
2021-06-06  3:07   ` Bjorn Andersson
2021-06-09  8:51     ` Manivannan Sadhasivam
2021-06-11  4:28       ` Bjorn Andersson
2021-06-11  4:44         ` Manivannan Sadhasivam
2021-06-16 18:23       ` Manivannan Sadhasivam
2021-06-15 21:40     ` Rob Herring
2021-06-15 21:57       ` Bjorn Andersson
2021-06-15 22:20         ` Rob Herring
2021-06-15 22:58           ` Bjorn Andersson
2021-06-03 10:38 ` [PATCH v2 3/3] MAINTAINERS: Add entry for Qualcomm PCIe Endpoint driver and binding Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YLw9de/J7h5KZtHu@builder.lan \
    --to=bjorn.andersson@linaro.org \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=robh@kernel.org \
    --subject='Re: [PATCH v2 1/3] dt-bindings: pci: Add devicetree binding for Qualcomm PCIe EP controller' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.