All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>,
	kieran.bingham+renesas@ideasonboard.com,
	niklas.soderlund+renesas@ragnatech.se, geert@linux-m68k.org,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 12/15] media: i2c: rdacm20: Embed 'serializer' field
Date: Thu, 17 Jun 2021 03:14:00 +0300	[thread overview]
Message-ID: <YMqTyFvxer0vjsKT@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20210616124616.49249-13-jacopo+renesas@jmondi.org>

Hi Jacopo,

Thank you for the patch.

This should be moved before 11/15 to avoid a bisection breakage (or
11/15 should be fixed, and this patch updated accordingly).

On Wed, Jun 16, 2021 at 02:46:13PM +0200, Jacopo Mondi wrote:
> There's no reason to allocate dynamically the 'serializer' field in
> the driver structure.
> 
> Embed the field and adjust all its users in the driver.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
>  drivers/media/i2c/rdacm20.c | 36 +++++++++++++++---------------------
>  1 file changed, 15 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c
> index 5e0314a2b1ca..029af8fd7485 100644
> --- a/drivers/media/i2c/rdacm20.c
> +++ b/drivers/media/i2c/rdacm20.c
> @@ -312,7 +312,7 @@ static const struct ov10635_reg {
>  
>  struct rdacm20_device {
>  	struct device			*dev;
> -	struct max9271_device		*serializer;
> +	struct max9271_device		serializer;
>  	struct i2c_client		*sensor;
>  	struct v4l2_subdev		sd;
>  	struct media_pad		pad;
> @@ -399,7 +399,7 @@ static int rdacm20_s_stream(struct v4l2_subdev *sd, int enable)
>  {
>  	struct rdacm20_device *dev = sd_to_rdacm20(sd);
>  
> -	return max9271_set_serial_link(dev->serializer, enable);
> +	return max9271_set_serial_link(&dev->serializer, enable);
>  }
>  
>  static int rdacm20_enum_mbus_code(struct v4l2_subdev *sd,
> @@ -455,10 +455,10 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
>  	unsigned int retry = 3;
>  	int ret;
>  
> -	max9271_wake_up(dev->serializer);
> +	max9271_wake_up(&dev->serializer);
>  
>  	/* Serial link disabled during config as it needs a valid pixel clock. */
> -	ret = max9271_set_serial_link(dev->serializer, false);
> +	ret = max9271_set_serial_link(&dev->serializer, false);
>  	if (ret)
>  		return ret;
>  
> @@ -466,35 +466,35 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
>  	 *  Ensure that we have a good link configuration before attempting to
>  	 *  identify the device.
>  	 */
> -	max9271_configure_i2c(dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
> -					       MAX9271_I2CSLVTO_1024US |
> -					       MAX9271_I2CMSTBT_105KBPS);
> +	max9271_configure_i2c(&dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
> +						MAX9271_I2CSLVTO_1024US |
> +						MAX9271_I2CMSTBT_105KBPS);
>  
> -	max9271_configure_gmsl_link(dev->serializer);
> +	max9271_configure_gmsl_link(&dev->serializer);
>  
> -	ret = max9271_verify_id(dev->serializer);
> +	ret = max9271_verify_id(&dev->serializer);
>  	if (ret < 0)
>  		return ret;
>  
> -	ret = max9271_set_address(dev->serializer, dev->addrs[0]);
> +	ret = max9271_set_address(&dev->serializer, dev->addrs[0]);
>  	if (ret < 0)
>  		return ret;
> -	dev->serializer->client->addr = dev->addrs[0];
> +	dev->serializer.client->addr = dev->addrs[0];
>  
>  	/*
>  	 * Reset the sensor by cycling the OV10635 reset signal connected to the
>  	 * MAX9271 GPIO1 and verify communication with the OV10635.
>  	 */
> -	ret = max9271_enable_gpios(dev->serializer, MAX9271_GPIO1OUT);
> +	ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT);
>  	if (ret)
>  		return ret;
>  
> -	ret = max9271_clear_gpios(dev->serializer, MAX9271_GPIO1OUT);
> +	ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT);
>  	if (ret)
>  		return ret;
>  	usleep_range(10000, 15000);
>  
> -	ret = max9271_set_gpios(dev->serializer, MAX9271_GPIO1OUT);
> +	ret = max9271_set_gpios(&dev->serializer, MAX9271_GPIO1OUT);
>  	if (ret)
>  		return ret;
>  	usleep_range(10000, 15000);
> @@ -564,13 +564,7 @@ static int rdacm20_probe(struct i2c_client *client)
>  	if (!dev)
>  		return -ENOMEM;
>  	dev->dev = &client->dev;
> -
> -	dev->serializer = devm_kzalloc(&client->dev, sizeof(*dev->serializer),
> -				       GFP_KERNEL);
> -	if (!dev->serializer)
> -		return -ENOMEM;
> -
> -	dev->serializer->client = client;
> +	dev->serializer.client = client;
>  
>  	ret = of_property_read_u32_array(client->dev.of_node, "reg",
>  					 dev->addrs, 2);

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2021-06-17  0:14 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-16 12:46 [PATCH v5 00/15] media: gmsl: Reliability improvements Jacopo Mondi
2021-06-16 12:46 ` [PATCH v5 01/15] media: i2c: max9286: Adjust parameters indent Jacopo Mondi
2021-06-16 12:46 ` [PATCH v5 02/15] media: i2c: max9286: Rename reverse_channel_mv Jacopo Mondi
2021-06-16 12:46 ` [PATCH v5 03/15] media: i2c: max9286: Cache channel amplitude Jacopo Mondi
2021-06-16 12:46 ` [PATCH v5 04/15] media: i2c: max9286: Define high " Jacopo Mondi
2021-06-16 12:46 ` [PATCH v5 05/15] media: i2c: max9286: Rework comments in .bound() Jacopo Mondi
2021-06-16 12:46 ` [PATCH v5 06/15] media: i2c: max9271: Check max9271_write() return Jacopo Mondi
2021-06-16 12:46 ` [PATCH v5 07/15] media: i2c: max9271: Introduce wake_up() function Jacopo Mondi
2021-06-16 12:46 ` [PATCH v5 08/15] media: i2c: rdacm21: Add delay after OV490 reset Jacopo Mondi
2021-06-16 12:46 ` [PATCH v5 09/15] media: i2c: rdacm21: Fix OV10640 powerup Jacopo Mondi
2021-06-16 12:46 ` [PATCH v5 10/15] media: i2c: rdacm21: Power up OV10640 before OV490 Jacopo Mondi
2021-06-16 23:47   ` Kieran Bingham
2021-06-16 12:46 ` [PATCH v5 11/15] media: i2c: rdacm20: Enable noise immunity Jacopo Mondi
2021-06-16 12:46 ` [PATCH v5 12/15] media: i2c: rdacm20: Embed 'serializer' field Jacopo Mondi
2021-06-17  0:14   ` Laurent Pinchart [this message]
2021-06-17  6:18     ` Hans Verkuil
2021-06-17  7:42       ` Jacopo Mondi
2021-06-17  8:12         ` Hans Verkuil
2021-06-17  8:20           ` Jacopo Mondi
2021-06-16 12:46 ` [PATCH v5 13/15] media: i2c: rdacm20: Report camera module name Jacopo Mondi
2021-06-16 12:46 ` [PATCH v5 14/15] media: i2c: rdacm20: Check return values Jacopo Mondi
2021-06-16 12:46 ` [PATCH v5 15/15] media: i2c: rdacm20: Re-work ov10635 reset Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YMqTyFvxer0vjsKT@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=geert@linux-m68k.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=jacopo+renesas@jmondi.org \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --subject='Re: [PATCH v5 12/15] media: i2c: rdacm20: Embed '\''serializer'\'' field' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.