* [PULL] 2nd set of IIO and Counter features, cleanups etc for the 5.14 cycle.
@ 2021-06-17 14:31 Jonathan Cameron
2021-06-17 16:24 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2021-06-17 14:31 UTC (permalink / raw)
To: gregkh, linux-iio
The following changes since commit 6771fb0b940eb74f1a68fe3f180a7668103397d3:
Merge tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next (2021-06-09 12:11:49 +0200)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.14b
for you to fetch changes up to 7cd04c863f9e1655d607705455e7714f24451984:
iio: light: tcs3472: do not free unallocated IRQ (2021-06-16 14:57:03 +0100)
----------------------------------------------------------------
Second set of Counter and IIO new device support, cleanups etc for 5.14
Counter
------
First part of general rework of counter subsystem to add a chrdev interface
for event drive data capture. Most of it will hopefully land next cycle.
* Consolidate documentation to avoid multiple copies of same docs in per
device files.
* Constify various arrays etc across subsystem.
* 104-quad-8:
- Annotate the module config parameter to avoid using it when kernel is
locked down.
- Spelling and trivial comment drops etc
* Intel QEP
- Follow up cleanups of trivial stuff from initial patch series.
IIO
---
Includes some cleanups as part of two ongoing audits
- runtime pm usage in IIO.
- Insufficient alignment on buffers passed to
iio_push_to_buffers_with_timstamp()
New device support
* bosch,bmc150
- Add ID for BMA253
Minor features / cleanups / minor fixes / late breaking fixes
* iio_push_to_buffers_with_timestamp() alignment fixes.
This set includes those where the best option is to mark the buffer as
__aligned(8). Normally this choice was made because there is too high a degree
of possible variation in number of channels enabled to be able to guarantee
the timestamp was always in the same location. This ruled out the more
obvious structure form used in other drivers. Only one small class of
related issues have patches under review and we can finally tighten up the
explicit rules to reflect the hidden requirement.
* dummy
- Kconfig build dependency fix.
* adi,ad_sigma_delta
- General devm related simplifications for these devices.
* adi,adf4350
- Fix some missing cleanup on error path.
* adi,adis, ADC drivers.
- Clean out unneeded spi_set_drvdata()
* ams-taos,tcs3472
- Fix a potential free of an irq that was never allocated.
* atlas,sensor
- Drop unbalanced runtime pm call and use pm_runtime_resume_and_get()
to reduce boilerplate.
* bosch,bma180
- Fix bandwidth register values used.
* bosch,bmc150
- Fix wrong pointer being dereferenced in remove.
- Stop device trying unregister itself rather than the second device.
- Refactor ACPI second device handing.
- Add support for DUAL250E ACPI HID.
- Move some stuff into the header to enable following patches to not
add additional accessor functions. Drop existing accessors.
- Add support for hinge angle setting with DUAL250E ACPI DSM to ensure
keyboard and touchpad enabled correctly when in laptop mode and disabled
otherwise.
- Add label attr for the multiple sensor locations with DUAL250E ACPI HID.
- Fix scale units for bma222
- Various reordering of devices supported lists to be alphabetical order.
- Drop unnecessary duplicated chip_info_tbl[] entries.
- Document that some devices have two interrupts, even if not currently
used by the driver.
- Move bma254 over to the bma255 driver.
- Move to more consistent scale values, based on assumption that some
datasheets use lower precision in their calculations in comparison
with others.
* hid-sensors
- Use namespaces for exported symbols.
- Update includes using manual inspection of output of the
include-what-you-use tool.
* invensense,icp10100
- Drop unbalanced runtime pm put. Use pm_runtime_resume_and_get() to cleanly
handle potential error.
* invensense,mpu6050
- Drop use of %hhx string formatting.
- runtime pm boilerplate removal and drop an unbalanced call in remove.
* liteon,ltr501
- Fix inaccurate volatile register list.
- Fix wrong mode bit.
- Add a missing leXX_to_cpu() conversion.
- Mark ltr501_chip_info structure as const.
* pulsed-light-lidar:
- Boilerplate removal using runtime_pm_resume_and_get()
* scmi-sensors
- Formatting of SPDX fix.
* silabs,si1133
- Fix a string format warning.
- Drop remaining uses of %hhx string formatting.
* silabs,si1145
- Drop use of %hhx string formatting.
* ti,ads1015
- Drop unbalanced runtime pm call in remove and reduce boilerplate.
----------------------------------------------------------------
Alexandru Ardelean (9):
iio: adc: ad_sigma_delta: introduct devm_ad_sd_setup_buffer_and_trigger()
iio: adc: ad7793: convert to device-managed functions
iio: adc: ad7791: convert to device-managed functions
iio: adc: ad7780: convert to device-managed functions
iio: adc: ad7192: use devm_clk_get_optional() for mclk
iio: adc: ad7192: convert to device-managed functions
iio: adc: ad_sigma_delta: remove ad_sd_{setup,cleanup}_buffer_and_trigger()
iio: imu: remove unused private data assigned with spi_set_drvdata()
iio: adc: remove unused private data assigned with spi_set_drvdata()
Andy Shevchenko (1):
iio: hid-sensors: lighten exported symbols by moving to IIO_HID namespace
Arnd Bergmann (1):
iio: si1133: fix format string warnings
Hans de Goede (9):
iio: accel: bmc150: Fix dereferencing the wrong pointer in bmc150_get/set_second_device
iio: accel: bmc150: Don't make the remove function of the second accelerometer unregister itself
iio: accel: bmc150: Move check for second ACPI device into a separate function
iio: accel: bmc150: Add support for dual-accelerometers with a DUAL250E HID
iio: accel: bmc150: Move struct bmc150_accel_data definition to bmc150-accel.h
iio: accel: bmc150: Remove bmc150_set/get_second_device() accessor functions
iio: accel: bmc150: Add support for DUAL250E ACPI DSM for setting the hinge angle
iio: accel: bmc150: Refactor bmc150_apply_acpi_orientation()
iio: accel: bmc150: Set label based on accel-location for ACPI DUAL250E fwnodes
Jarkko Nikula (2):
counter: intel-qep: Mark PM callbacks with __maybe_unused
counter: intel-qep: Use to_pci_dev() helper
Jonathan Cameron (18):
iio: light: si1133: Drop remaining uses of %hhx format string.
iio: imu: inv_mpu6050: Drop use of %hhx format string.
iio: light: si1145: Drop use of %hhx format specifier.
iio: adc: ad7124: Use devm_ managed calls for all of probe() + drop remove()
iio: adc: at91-sama5d2: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: hx711: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: mxs-lradc: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: ti-ads8688: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()
iio: magn: rm3100: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()
iio: light: vcnl4000: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: light: vcnl4035: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: prox: isl29501: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: imu: mpu6050: Balance runtime pm + use pm_runtime_resume_and_get()
iio: adc: ads1015: Balance runtime pm + pm_runtime_resume_and_get()
iio: chemical: atlas-sensor: Balance runtime pm + pm_runtime_resume_and_get()
iio: prox: pulsed-light-v2: Use pm_runtime_resume_and_get()
iio: pressure: icp10100: Balance runtime pm + use pm_runtime_resume_and_get()
iio: hid-sensors: Update header includes
Marc Kleine-Budde (2):
iio: ltr501: mark register holding upper 8 bits of ALS_DATA{0,1} and PS_DATA as volatile, too
iio: ltr501: mark ltr501_chip_info as const
Oliver Lang (2):
iio: ltr501: ltr559: fix initialization of LTR501_ALS_CONTR
iio: ltr501: ltr501_read_ps(): add missing endianness conversion
Stephan Gerhold (12):
iio: accel: bma180: Fix BMA25x bandwidth register values
iio: accel: bmc150: Fix bma222 scale unit
iio: accel: bmc150: Clarify combo modules in Kconfig
iio: accel: bmc150: Drop misleading/duplicate chip identifiers
iio: accel: bmc150: Drop duplicated documentation of supported chips
iio: accel: bmc150: Sort all chip names alphabetically / by chip ID
dt-bindings: iio: accel: bma255: Document bosch,bma253
iio: accel: bmc150: Add device IDs for BMA253
dt-bindings: iio: bma255: Allow multiple interrupts
dt-bindings: iio: accel: bma180/bma255: Move bma254 to bma255 schema
iio: accel: bma180/bmc150: Move BMA254 to bmc150-accel driver
iio: accel: bmc150: Use more consistent and accurate scale values
Tom Rix (1):
iio: scmi: fix spelling of SPDX tag
Wei Yongjun (1):
iio: dummy: Fix build error when CONFIG_IIO_TRIGGERED_BUFFER is not set
William Breathitt Gray (16):
docs: counter: Consolidate Counter sysfs attributes documentation
docs: counter: Fix spelling
counter: 104-quad-8: Remove pointless comment
counter: 104-quad-8: Annotate hardware config module parameter
counter: 104-quad-8: Add const qualifiers for quad8_preset_register_set
counter: 104-quad-8: Add const qualifier for functions_list array
counter: interrupt-cnt: Add const qualifier for functions_list array
counter: microchip-tcb-capture: Add const qualifier for functions_list array
counter: stm32-lptimer-cnt: Add const qualifier for functions_list array
counter: stm32-timer-cnt: Add const qualifier for functions_list array
counter: 104-quad-8: Add const qualifier for actions_list array
counter: ftm-quaddec: Add const qualifier for actions_list array
counter: microchip-tcb-capture: Add const qualifier for actions_list array
counter: stm32-lptimer-cnt: Add const qualifier for actions_list array
counter: stm32-timer-cnt: Add const qualifier for actions_list array
counter: interrupt-cnt: Add const qualifier for actions_list array
Yang Yingliang (1):
iio: frequency: adf4350: disable reg and clk on error in adf4350_probe()
frank zago (1):
iio: light: tcs3472: do not free unallocated IRQ
Documentation/ABI/testing/sysfs-bus-counter | 76 ++++++-
.../ABI/testing/sysfs-bus-counter-104-quad-8 | 61 -----
.../ABI/testing/sysfs-bus-counter-ftm-quaddec | 16 --
.../bindings/iio/accel/bosch,bma180.yaml | 3 +-
.../bindings/iio/accel/bosch,bma255.yaml | 9 +-
Documentation/driver-api/generic-counter.rst | 2 +-
MAINTAINERS | 4 +-
drivers/counter/104-quad-8.c | 13 +-
drivers/counter/ftm-quaddec.c | 2 +-
drivers/counter/intel-qep.c | 10 +-
drivers/counter/interrupt-cnt.c | 8 +-
drivers/counter/microchip-tcb-capture.c | 4 +-
drivers/counter/stm32-lptimer-cnt.c | 4 +-
drivers/counter/stm32-timer-cnt.c | 4 +-
drivers/iio/accel/Kconfig | 11 +-
drivers/iio/accel/bma180.c | 97 ++------
drivers/iio/accel/bmc150-accel-core.c | 221 +++++++------------
drivers/iio/accel/bmc150-accel-i2c.c | 245 ++++++++++++++++-----
drivers/iio/accel/bmc150-accel-spi.c | 31 +--
drivers/iio/accel/bmc150-accel.h | 72 +++++-
drivers/iio/accel/hid-sensor-accel-3d.c | 6 +-
drivers/iio/adc/ad7124.c | 48 ++--
drivers/iio/adc/ad7192.c | 93 ++++----
drivers/iio/adc/ad7476.c | 2 -
drivers/iio/adc/ad7766.c | 2 -
drivers/iio/adc/ad7768-1.c | 1 -
drivers/iio/adc/ad7780.c | 38 +---
drivers/iio/adc/ad7791.c | 44 ++--
drivers/iio/adc/ad7793.c | 53 ++---
drivers/iio/adc/ad7887.c | 1 -
drivers/iio/adc/ad9467.c | 2 -
drivers/iio/adc/ad_sigma_delta.c | 82 +++----
drivers/iio/adc/at91-sama5d2_adc.c | 3 +-
drivers/iio/adc/hi8435.c | 1 -
drivers/iio/adc/hx711.c | 4 +-
drivers/iio/adc/max1027.c | 2 -
drivers/iio/adc/max1241.c | 2 -
drivers/iio/adc/mxs-lradc-adc.c | 3 +-
drivers/iio/adc/ti-adc084s021.c | 3 -
drivers/iio/adc/ti-ads1015.c | 5 +-
drivers/iio/adc/ti-ads124s08.c | 2 -
drivers/iio/adc/ti-ads8688.c | 3 +-
drivers/iio/adc/ti-tsc2046.c | 2 -
drivers/iio/chemical/atlas-sensor.c | 13 +-
.../iio/common/hid-sensors/hid-sensor-attributes.c | 32 ++-
.../iio/common/hid-sensors/hid-sensor-trigger.c | 14 +-
.../iio/common/hid-sensors/hid-sensor-trigger.h | 3 +
drivers/iio/common/scmi_sensors/Makefile | 2 +-
drivers/iio/dummy/Kconfig | 1 +
drivers/iio/frequency/adf4350.c | 6 +-
drivers/iio/gyro/hid-sensor-gyro-3d.c | 6 +-
drivers/iio/humidity/hid-sensor-humidity.c | 2 +
drivers/iio/imu/adis16400.c | 2 -
drivers/iio/imu/adis16460.c | 2 -
drivers/iio/imu/adis16475.c | 1 -
drivers/iio/imu/adis16480.c | 2 -
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 24 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 6 +-
drivers/iio/light/hid-sensor-als.c | 6 +-
drivers/iio/light/hid-sensor-prox.c | 6 +-
drivers/iio/light/ltr501.c | 25 ++-
drivers/iio/light/si1133.c | 18 +-
drivers/iio/light/si1145.c | 10 +-
drivers/iio/light/tcs3472.c | 6 +-
drivers/iio/light/vcnl4000.c | 2 +-
drivers/iio/light/vcnl4035.c | 3 +-
drivers/iio/magnetometer/hid-sensor-magn-3d.c | 7 +-
drivers/iio/magnetometer/rm3100-core.c | 3 +-
drivers/iio/orientation/hid-sensor-incl-3d.c | 6 +-
drivers/iio/orientation/hid-sensor-rotation.c | 5 +-
.../iio/position/hid-sensor-custom-intel-hinge.c | 3 +
drivers/iio/pressure/hid-sensor-press.c | 6 +-
drivers/iio/pressure/icp10100.c | 5 +-
drivers/iio/proximity/isl29501.c | 2 +-
drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 4 +-
drivers/iio/temperature/hid-sensor-temperature.c | 2 +
drivers/rtc/rtc-hid-sensor-time.c | 1 +
include/linux/iio/adc/ad_sigma_delta.h | 4 +-
78 files changed, 713 insertions(+), 822 deletions(-)
delete mode 100644 Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
delete mode 100644 Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PULL] 2nd set of IIO and Counter features, cleanups etc for the 5.14 cycle.
2021-06-17 14:31 [PULL] 2nd set of IIO and Counter features, cleanups etc for the 5.14 cycle Jonathan Cameron
@ 2021-06-17 16:24 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2021-06-17 16:24 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
On Thu, Jun 17, 2021 at 03:31:32PM +0100, Jonathan Cameron wrote:
> The following changes since commit 6771fb0b940eb74f1a68fe3f180a7668103397d3:
>
> Merge tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next (2021-06-09 12:11:49 +0200)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.14b
Pulled and pushed out, thanks.
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-06-17 16:25 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-17 14:31 [PULL] 2nd set of IIO and Counter features, cleanups etc for the 5.14 cycle Jonathan Cameron
2021-06-17 16:24 ` Greg KH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.