All of lore.kernel.org
 help / color / mirror / Atom feed
From: Borislav Petkov <bp@alien8.de>
To: Joerg Roedel <joro@8bytes.org>
Cc: x86@kernel.org, Joerg Roedel <jroedel@suse.de>,
	Brijesh Singh <brijesh.singh@amd.com>,
	Tom Lendacky <thomas.lendacky@amd.com>,
	hpa@zytor.com, Andy Lutomirski <luto@kernel.org>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	Peter Zijlstra <peterz@infradead.org>,
	Jiri Slaby <jslaby@suse.cz>,
	Dan Williams <dan.j.williams@intel.com>,
	Juergen Gross <jgross@suse.com>,
	Kees Cook <keescook@chromium.org>,
	David Rientjes <rientjes@google.com>,
	Cfir Cohen <cfir@google.com>, Erdem Aktas <erdemaktas@google.com>,
	Masami Hiramatsu <mhiramat@kernel.org>,
	Mike Stunes <mstunes@vmware.com>,
	Sean Christopherson <seanjc@google.com>,
	Martin Radev <martin.b.radev@gmail.com>,
	Arvind Sankar <nivedita@alum.mit.edu>,
	linux-coco@lists.linux.dev, linux-kernel@vger.kernel.org,
	kvm@vger.kernel.org, virtualization@lists.linux-foundation.org
Subject: Re: [PATCH 2/3] x86/sev: Add defines for GHCB version 2 MSR protocol requests
Date: Wed, 23 Jun 2021 11:32:50 +0200	[thread overview]
Message-ID: <YNL/wpVY1PmGJASW@zn.tnic> (raw)
In-Reply-To: <YNLXQIZ5e1wjkshG@8bytes.org>

On Wed, Jun 23, 2021 at 08:40:00AM +0200, Joerg Roedel wrote:
> From: Brijesh Singh <brijesh.singh@amd.com>
> 
> Add the necessary defines for supporting the GHCB version 2 protocol.
> This includes defines for:
> 
> 	- MSR-based AP hlt request/response
> 	- Hypervisor Feature request/response
> 
> This is the bare minimum of requests that need to be supported by a GHCB
> version 2 implementation. There are more requests in the specification,
> but those depend on Secure Nested Paging support being available.
> 
> These defines are shared between SEV host and guest support, so they are
> submitted as an individual patch without users yet to avoid merge
> conflicts in the future.
> 
> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
> Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
> Signed-off-by: Joerg Roedel <jroedel@suse.de>
> ---
>  arch/x86/include/asm/sev-common.h | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/x86/include/asm/sev-common.h b/arch/x86/include/asm/sev-common.h
> index 1cc9e7dd8107..9aa2f29b4c97 100644
> --- a/arch/x86/include/asm/sev-common.h
> +++ b/arch/x86/include/asm/sev-common.h
> @@ -47,6 +47,21 @@
>  		(((unsigned long)reg & GHCB_MSR_CPUID_REG_MASK) << GHCB_MSR_CPUID_REG_POS) | \
>  		(((unsigned long)fn) << GHCB_MSR_CPUID_FUNC_POS))
>  
> +/* AP Reset Hold */
> +#define GHCB_MSR_AP_RESET_HOLD_REQ		0x006
> +#define GHCB_MSR_AP_RESET_HOLD_RESP		0x007
> +#define GHCB_MSR_AP_RESET_HOLD_RESULT_POS	12
> +#define GHCB_MSR_AP_RESET_HOLD_RESULT_MASK	GENMASK_ULL(51, 0)
> +
> +/* GHCB Hypervisor Feature Request/Response */
> +#define GHCB_MSR_HV_FT_REQ			0x080
> +#define GHCB_MSR_HV_FT_RESP			0x081
> +#define GHCB_MSR_HV_FT_POS			12
> +#define GHCB_MSR_HV_FT_MASK			GENMASK_ULL(51, 0)
> +
> +#define GHCB_MSR_HV_FT_RESP_VAL(v)		\
> +	((unsigned long)((v) >> GHCB_MSR_HV_FT_POS) & GHCB_MSR_HV_FT_MASK)
> +

Ok, so I took a critical look at this and it doesn't make sense to have
a differently named define each time you need the [63:12] slice of
GHCBData. So you can simply use GHCB_DATA(msr_value) instead, see below.

Complaints?

---
From: Brijesh Singh <brijesh.singh@amd.com>
Date: Wed, 23 Jun 2021 08:40:00 +0200
Subject: [PATCH] x86/sev: Add defines for GHCB version 2 MSR protocol requests

Add the necessary defines for supporting the GHCB version 2 protocol.
This includes defines for:

	- MSR-based AP hlt request/response
	- Hypervisor Feature request/response

This is the bare minimum of requests that need to be supported by a GHCB
version 2 implementation. There are more requests in the specification,
but those depend on Secure Nested Paging support being available.

These defines are shared between SEV host and guest support.

  [ bp: Fold in https://lkml.kernel.org/r/20210622144825.27588-2-joro@8bytes.org too.
        Simplify the brewing macro maze into readability. ]

Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/YNLXQIZ5e1wjkshG@8bytes.org
---
 arch/x86/include/asm/sev-common.h | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/sev-common.h b/arch/x86/include/asm/sev-common.h
index 629c3df243f0..2cef6c5a52c2 100644
--- a/arch/x86/include/asm/sev-common.h
+++ b/arch/x86/include/asm/sev-common.h
@@ -9,8 +9,13 @@
 #define __ASM_X86_SEV_COMMON_H
 
 #define GHCB_MSR_INFO_POS		0
-#define GHCB_MSR_INFO_MASK		(BIT_ULL(12) - 1)
+#define GHCB_DATA_LOW			12
+#define GHCB_MSR_INFO_MASK		(BIT_ULL(GHCB_DATA_LOW) - 1)
 
+#define GHCB_DATA(v)			\
+	(((unsigned long)(v) & ~GHCB_MSR_INFO_MASK) >> GHCB_DATA_LOW)
+
+/* SEV Information Request/Response */
 #define GHCB_MSR_SEV_INFO_RESP		0x001
 #define GHCB_MSR_SEV_INFO_REQ		0x002
 #define GHCB_MSR_VER_MAX_POS		48
@@ -28,6 +33,7 @@
 #define GHCB_MSR_PROTO_MAX(v)		(((v) >> GHCB_MSR_VER_MAX_POS) & GHCB_MSR_VER_MAX_MASK)
 #define GHCB_MSR_PROTO_MIN(v)		(((v) >> GHCB_MSR_VER_MIN_POS) & GHCB_MSR_VER_MIN_MASK)
 
+/* CPUID Request/Response */
 #define GHCB_MSR_CPUID_REQ		0x004
 #define GHCB_MSR_CPUID_RESP		0x005
 #define GHCB_MSR_CPUID_FUNC_POS		32
@@ -45,6 +51,14 @@
 		(((unsigned long)reg & GHCB_MSR_CPUID_REG_MASK) << GHCB_MSR_CPUID_REG_POS) | \
 		(((unsigned long)fn) << GHCB_MSR_CPUID_FUNC_POS))
 
+/* AP Reset Hold */
+#define GHCB_MSR_AP_RESET_HOLD_REQ		0x006
+#define GHCB_MSR_AP_RESET_HOLD_RESP		0x007
+
+/* GHCB Hypervisor Feature Request/Response */
+#define GHCB_MSR_HV_FT_REQ			0x080
+#define GHCB_MSR_HV_FT_RESP			0x081
+
 #define GHCB_MSR_TERM_REQ		0x100
 #define GHCB_MSR_TERM_REASON_SET_POS	12
 #define GHCB_MSR_TERM_REASON_SET_MASK	0xf
-- 
2.29.2

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette

WARNING: multiple messages have this Message-ID (diff)
From: Borislav Petkov <bp@alien8.de>
To: Joerg Roedel <joro@8bytes.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>,
	kvm@vger.kernel.org, Peter Zijlstra <peterz@infradead.org>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	virtualization@lists.linux-foundation.org,
	Arvind Sankar <nivedita@alum.mit.edu>,
	hpa@zytor.com, Jiri Slaby <jslaby@suse.cz>,
	x86@kernel.org, David Rientjes <rientjes@google.com>,
	Martin Radev <martin.b.radev@gmail.com>,
	Tom Lendacky <thomas.lendacky@amd.com>,
	Joerg Roedel <jroedel@suse.de>, Kees Cook <keescook@chromium.org>,
	Cfir Cohen <cfir@google.com>,
	linux-coco@lists.linux.dev, Andy Lutomirski <luto@kernel.org>,
	Dan Williams <dan.j.williams@intel.com>,
	Juergen Gross <jgross@suse.com>, Mike Stunes <mstunes@vmware.com>,
	Sean Christopherson <seanjc@google.com>,
	linux-kernel@vger.kernel.org,
	Masami Hiramatsu <mhiramat@kernel.org>,
	Erdem Aktas <erdemaktas@google.com>
Subject: Re: [PATCH 2/3] x86/sev: Add defines for GHCB version 2 MSR protocol requests
Date: Wed, 23 Jun 2021 11:32:50 +0200	[thread overview]
Message-ID: <YNL/wpVY1PmGJASW@zn.tnic> (raw)
In-Reply-To: <YNLXQIZ5e1wjkshG@8bytes.org>

On Wed, Jun 23, 2021 at 08:40:00AM +0200, Joerg Roedel wrote:
> From: Brijesh Singh <brijesh.singh@amd.com>
> 
> Add the necessary defines for supporting the GHCB version 2 protocol.
> This includes defines for:
> 
> 	- MSR-based AP hlt request/response
> 	- Hypervisor Feature request/response
> 
> This is the bare minimum of requests that need to be supported by a GHCB
> version 2 implementation. There are more requests in the specification,
> but those depend on Secure Nested Paging support being available.
> 
> These defines are shared between SEV host and guest support, so they are
> submitted as an individual patch without users yet to avoid merge
> conflicts in the future.
> 
> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
> Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
> Signed-off-by: Joerg Roedel <jroedel@suse.de>
> ---
>  arch/x86/include/asm/sev-common.h | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/x86/include/asm/sev-common.h b/arch/x86/include/asm/sev-common.h
> index 1cc9e7dd8107..9aa2f29b4c97 100644
> --- a/arch/x86/include/asm/sev-common.h
> +++ b/arch/x86/include/asm/sev-common.h
> @@ -47,6 +47,21 @@
>  		(((unsigned long)reg & GHCB_MSR_CPUID_REG_MASK) << GHCB_MSR_CPUID_REG_POS) | \
>  		(((unsigned long)fn) << GHCB_MSR_CPUID_FUNC_POS))
>  
> +/* AP Reset Hold */
> +#define GHCB_MSR_AP_RESET_HOLD_REQ		0x006
> +#define GHCB_MSR_AP_RESET_HOLD_RESP		0x007
> +#define GHCB_MSR_AP_RESET_HOLD_RESULT_POS	12
> +#define GHCB_MSR_AP_RESET_HOLD_RESULT_MASK	GENMASK_ULL(51, 0)
> +
> +/* GHCB Hypervisor Feature Request/Response */
> +#define GHCB_MSR_HV_FT_REQ			0x080
> +#define GHCB_MSR_HV_FT_RESP			0x081
> +#define GHCB_MSR_HV_FT_POS			12
> +#define GHCB_MSR_HV_FT_MASK			GENMASK_ULL(51, 0)
> +
> +#define GHCB_MSR_HV_FT_RESP_VAL(v)		\
> +	((unsigned long)((v) >> GHCB_MSR_HV_FT_POS) & GHCB_MSR_HV_FT_MASK)
> +

Ok, so I took a critical look at this and it doesn't make sense to have
a differently named define each time you need the [63:12] slice of
GHCBData. So you can simply use GHCB_DATA(msr_value) instead, see below.

Complaints?

---
From: Brijesh Singh <brijesh.singh@amd.com>
Date: Wed, 23 Jun 2021 08:40:00 +0200
Subject: [PATCH] x86/sev: Add defines for GHCB version 2 MSR protocol requests

Add the necessary defines for supporting the GHCB version 2 protocol.
This includes defines for:

	- MSR-based AP hlt request/response
	- Hypervisor Feature request/response

This is the bare minimum of requests that need to be supported by a GHCB
version 2 implementation. There are more requests in the specification,
but those depend on Secure Nested Paging support being available.

These defines are shared between SEV host and guest support.

  [ bp: Fold in https://lkml.kernel.org/r/20210622144825.27588-2-joro@8bytes.org too.
        Simplify the brewing macro maze into readability. ]

Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/YNLXQIZ5e1wjkshG@8bytes.org
---
 arch/x86/include/asm/sev-common.h | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/sev-common.h b/arch/x86/include/asm/sev-common.h
index 629c3df243f0..2cef6c5a52c2 100644
--- a/arch/x86/include/asm/sev-common.h
+++ b/arch/x86/include/asm/sev-common.h
@@ -9,8 +9,13 @@
 #define __ASM_X86_SEV_COMMON_H
 
 #define GHCB_MSR_INFO_POS		0
-#define GHCB_MSR_INFO_MASK		(BIT_ULL(12) - 1)
+#define GHCB_DATA_LOW			12
+#define GHCB_MSR_INFO_MASK		(BIT_ULL(GHCB_DATA_LOW) - 1)
 
+#define GHCB_DATA(v)			\
+	(((unsigned long)(v) & ~GHCB_MSR_INFO_MASK) >> GHCB_DATA_LOW)
+
+/* SEV Information Request/Response */
 #define GHCB_MSR_SEV_INFO_RESP		0x001
 #define GHCB_MSR_SEV_INFO_REQ		0x002
 #define GHCB_MSR_VER_MAX_POS		48
@@ -28,6 +33,7 @@
 #define GHCB_MSR_PROTO_MAX(v)		(((v) >> GHCB_MSR_VER_MAX_POS) & GHCB_MSR_VER_MAX_MASK)
 #define GHCB_MSR_PROTO_MIN(v)		(((v) >> GHCB_MSR_VER_MIN_POS) & GHCB_MSR_VER_MIN_MASK)
 
+/* CPUID Request/Response */
 #define GHCB_MSR_CPUID_REQ		0x004
 #define GHCB_MSR_CPUID_RESP		0x005
 #define GHCB_MSR_CPUID_FUNC_POS		32
@@ -45,6 +51,14 @@
 		(((unsigned long)reg & GHCB_MSR_CPUID_REG_MASK) << GHCB_MSR_CPUID_REG_POS) | \
 		(((unsigned long)fn) << GHCB_MSR_CPUID_FUNC_POS))
 
+/* AP Reset Hold */
+#define GHCB_MSR_AP_RESET_HOLD_REQ		0x006
+#define GHCB_MSR_AP_RESET_HOLD_RESP		0x007
+
+/* GHCB Hypervisor Feature Request/Response */
+#define GHCB_MSR_HV_FT_REQ			0x080
+#define GHCB_MSR_HV_FT_RESP			0x081
+
 #define GHCB_MSR_TERM_REQ		0x100
 #define GHCB_MSR_TERM_REASON_SET_POS	12
 #define GHCB_MSR_TERM_REASON_SET_MASK	0xf
-- 
2.29.2

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

  reply	other threads:[~2021-06-23  9:39 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-22 14:48 [PATCH 0/3] x86/sev: Minor updates for SEV guest support Joerg Roedel
2021-06-22 14:48 ` Joerg Roedel
2021-06-22 14:48 ` [PATCH 1/3] x86/sev: Add Comments to existing GHCB MSR protocol defines Joerg Roedel
2021-06-22 14:48   ` Joerg Roedel
2021-06-22 14:48 ` [PATCH 2/3] x86/sev: Add defines for GHCB version 2 MSR protocol requests Joerg Roedel
2021-06-22 14:48   ` Joerg Roedel
2021-06-22 16:19   ` Tom Lendacky
2021-06-22 16:19     ` Tom Lendacky via Virtualization
2021-06-22 16:34     ` Brijesh Singh
2021-06-22 16:34       ` Brijesh Singh via Virtualization
2021-06-23  6:40   ` Joerg Roedel
2021-06-23  6:40     ` Joerg Roedel
2021-06-23  9:32     ` Borislav Petkov [this message]
2021-06-23  9:32       ` Borislav Petkov
2021-06-23  9:49       ` Joerg Roedel
2021-06-23  9:49         ` Joerg Roedel
2021-06-23 12:33       ` Brijesh Singh
2021-06-23 12:33         ` Brijesh Singh via Virtualization
2021-06-23 13:12       ` Tom Lendacky
2021-06-23 13:12         ` Tom Lendacky via Virtualization
2021-06-23 13:32     ` [tip: x86/sev] " tip-bot2 for Brijesh Singh
2021-06-22 14:48 ` [PATCH 3/3] x86/sev: Use "SEV: " prefix for messages from sev.c Joerg Roedel
2021-06-22 14:48   ` Joerg Roedel
2021-06-23 13:32   ` [tip: x86/sev] " tip-bot2 for Joerg Roedel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YNL/wpVY1PmGJASW@zn.tnic \
    --to=bp@alien8.de \
    --cc=brijesh.singh@amd.com \
    --cc=cfir@google.com \
    --cc=dan.j.williams@intel.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=erdemaktas@google.com \
    --cc=hpa@zytor.com \
    --cc=jgross@suse.com \
    --cc=joro@8bytes.org \
    --cc=jroedel@suse.de \
    --cc=jslaby@suse.cz \
    --cc=keescook@chromium.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-coco@lists.linux.dev \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=martin.b.radev@gmail.com \
    --cc=mhiramat@kernel.org \
    --cc=mstunes@vmware.com \
    --cc=nivedita@alum.mit.edu \
    --cc=peterz@infradead.org \
    --cc=rientjes@google.com \
    --cc=seanjc@google.com \
    --cc=thomas.lendacky@amd.com \
    --cc=virtualization@lists.linux-foundation.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.