All of lore.kernel.org
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH] dmadev: introduce DMA device library
@ 2021-07-02 13:18 Chengwen Feng
  2021-07-02 13:59 ` Bruce Richardson
                   ` (29 more replies)
  0 siblings, 30 replies; 339+ messages in thread
From: Chengwen Feng @ 2021-07-02 13:18 UTC (permalink / raw)
  To: thomas, ferruh.yigit, bruce.richardson, jerinj, jerinjacobk
  Cc: dev, mb, nipun.gupta, hemant.agrawal, maxime.coquelin,
	honnappa.nagarahalli, david.marchand, sburla, pkapoor,
	konstantin.ananyev, liangma

This patch introduces 'dmadevice' which is a generic type of DMA
device.

The APIs of dmadev library exposes some generic operations which can
enable configuration and I/O with the DMA devices.

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
---
 MAINTAINERS                  |   4 +
 config/rte_config.h          |   3 +
 lib/dmadev/meson.build       |   6 +
 lib/dmadev/rte_dmadev.c      | 438 +++++++++++++++++++++
 lib/dmadev/rte_dmadev.h      | 919 +++++++++++++++++++++++++++++++++++++++++++
 lib/dmadev/rte_dmadev_core.h |  98 +++++
 lib/dmadev/rte_dmadev_pmd.h  | 210 ++++++++++
 lib/dmadev/version.map       |  32 ++
 lib/meson.build              |   1 +
 9 files changed, 1711 insertions(+)
 create mode 100644 lib/dmadev/meson.build
 create mode 100644 lib/dmadev/rte_dmadev.c
 create mode 100644 lib/dmadev/rte_dmadev.h
 create mode 100644 lib/dmadev/rte_dmadev_core.h
 create mode 100644 lib/dmadev/rte_dmadev_pmd.h
 create mode 100644 lib/dmadev/version.map

diff --git a/MAINTAINERS b/MAINTAINERS
index 4347555..2019783 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -496,6 +496,10 @@ F: drivers/raw/skeleton/
 F: app/test/test_rawdev.c
 F: doc/guides/prog_guide/rawdev.rst
 
+Dma device API
+M: Chengwen Feng <fengchengwen@huawei.com>
+F: lib/dmadev/
+
 
 Memory Pool Drivers
 -------------------
diff --git a/config/rte_config.h b/config/rte_config.h
index 590903c..331a431 100644
--- a/config/rte_config.h
+++ b/config/rte_config.h
@@ -81,6 +81,9 @@
 /* rawdev defines */
 #define RTE_RAWDEV_MAX_DEVS 64
 
+/* dmadev defines */
+#define RTE_DMADEV_MAX_DEVS 64
+
 /* ip_fragmentation defines */
 #define RTE_LIBRTE_IP_FRAG_MAX_FRAG 4
 #undef RTE_LIBRTE_IP_FRAG_TBL_STAT
diff --git a/lib/dmadev/meson.build b/lib/dmadev/meson.build
new file mode 100644
index 0000000..c918dae
--- /dev/null
+++ b/lib/dmadev/meson.build
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2021 HiSilicon Limited.
+
+sources = files('rte_dmadev.c')
+headers = files('rte_dmadev.h', 'rte_dmadev_pmd.h')
+indirect_headers += files('rte_dmadev_core.h')
diff --git a/lib/dmadev/rte_dmadev.c b/lib/dmadev/rte_dmadev.c
new file mode 100644
index 0000000..a94e839
--- /dev/null
+++ b/lib/dmadev/rte_dmadev.c
@@ -0,0 +1,438 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2021 HiSilicon Limited.
+ */
+
+#include <ctype.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdint.h>
+
+#include <rte_log.h>
+#include <rte_debug.h>
+#include <rte_dev.h>
+#include <rte_memory.h>
+#include <rte_memzone.h>
+#include <rte_malloc.h>
+#include <rte_errno.h>
+#include <rte_string_fns.h>
+
+#include "rte_dmadev.h"
+#include "rte_dmadev_pmd.h"
+
+struct rte_dmadev rte_dmadevices[RTE_DMADEV_MAX_DEVS];
+
+uint16_t
+rte_dmadev_count(void)
+{
+	uint16_t count = 0;
+	uint16_t i;
+
+	for (i = 0; i < RTE_DMADEV_MAX_DEVS; i++) {
+		if (rte_dmadevices[i].attached)
+			count++;
+	}
+
+	return count;
+}
+
+int
+rte_dmadev_get_dev_id(const char *name)
+{
+	uint16_t i;
+
+	if (name == NULL)
+		return -EINVAL;
+
+	for (i = 0; i < RTE_DMADEV_MAX_DEVS; i++)
+		if ((strcmp(rte_dmadevices[i].name, name) == 0) &&
+		    (rte_dmadevices[i].attached == RTE_DMADEV_ATTACHED))
+			return i;
+
+	return -ENODEV;
+}
+
+int
+rte_dmadev_socket_id(uint16_t dev_id)
+{
+	struct rte_dmadev *dev;
+
+	RTE_DMADEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+	dev = &rte_dmadevices[dev_id];
+
+	return dev->socket_id;
+}
+
+int
+rte_dmadev_info_get(uint16_t dev_id, struct rte_dmadev_info *dev_info)
+{
+	struct rte_dmadev *dev;
+	int diag;
+
+	RTE_DMADEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+	RTE_FUNC_PTR_OR_ERR_RET(dev_info, -EINVAL);
+
+	dev = &rte_dmadevices[dev_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_info_get, -ENOTSUP);
+
+	memset(dev_info, 0, sizeof(struct rte_dmadev_info));
+	diag = (*dev->dev_ops->dev_info_get)(dev, dev_info);
+	if (diag != 0)
+		return diag;
+
+	dev_info->device = dev->device;
+	dev_info->driver_name = dev->driver_name;
+	dev_info->socket_id = dev->socket_id;
+
+	return 0;
+}
+
+int
+rte_dmadev_configure(uint16_t dev_id, const struct rte_dmadev_conf *dev_conf)
+{
+	struct rte_dmadev *dev;
+	int diag;
+
+	RTE_DMADEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+	RTE_FUNC_PTR_OR_ERR_RET(dev_conf, -EINVAL);
+
+	dev = &rte_dmadevices[dev_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_configure, -ENOTSUP);
+
+	if (dev->started) {
+		RTE_DMADEV_LOG(ERR,
+		   "device %u must be stopped to allow configuration", dev_id);
+		return -EBUSY;
+	}
+
+	diag = (*dev->dev_ops->dev_configure)(dev, dev_conf);
+	if (diag != 0)
+		RTE_DMADEV_LOG(ERR, "device %u dev_configure failed, ret = %d",
+			       dev_id, diag);
+	else
+		dev->attached = 1;
+
+	return diag;
+}
+
+int
+rte_dmadev_start(uint16_t dev_id)
+{
+	struct rte_dmadev *dev;
+	int diag;
+
+	RTE_DMADEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+
+	dev = &rte_dmadevices[dev_id];
+	if (dev->started != 0) {
+		RTE_DMADEV_LOG(ERR, "device %u already started", dev_id);
+		return 0;
+	}
+
+	if (dev->dev_ops->dev_start == NULL)
+		goto mark_started;
+
+	diag = (*dev->dev_ops->dev_start)(dev);
+	if (diag != 0)
+		return diag;
+
+mark_started:
+	dev->started = 1;
+	return 0;
+}
+
+int
+rte_dmadev_stop(uint16_t dev_id)
+{
+	struct rte_dmadev *dev;
+	int diag;
+
+	RTE_DMADEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+
+	dev = &rte_dmadevices[dev_id];
+
+	if (dev->started == 0) {
+		RTE_DMADEV_LOG(ERR, "device %u already stopped", dev_id);
+		return 0;
+	}
+
+	if (dev->dev_ops->dev_stop == NULL)
+		goto mark_stopped;
+
+	diag = (*dev->dev_ops->dev_stop)(dev);
+	if (diag != 0)
+		return diag;
+
+mark_stopped:
+	dev->started = 0;
+	return 0;
+}
+
+int
+rte_dmadev_close(uint16_t dev_id)
+{
+	struct rte_dmadev *dev;
+
+	RTE_DMADEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+
+	dev = &rte_dmadevices[dev_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_close, -ENOTSUP);
+
+	/* Device must be stopped before it can be closed */
+	if (dev->started == 1) {
+		RTE_DMADEV_LOG(ERR, "device %u must be stopped before closing",
+			       dev_id);
+		return -EBUSY;
+	}
+
+	return (*dev->dev_ops->dev_close)(dev);
+}
+
+int
+rte_dmadev_reset(uint16_t dev_id)
+{
+	struct rte_dmadev *dev;
+
+	RTE_DMADEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+
+	dev = &rte_dmadevices[dev_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_reset, -ENOTSUP);
+
+	/* Reset is not dependent on state of the device */
+	return (*dev->dev_ops->dev_reset)(dev);
+}
+
+int
+rte_dmadev_queue_setup(uint16_t dev_id,
+		       const struct rte_dmadev_queue_conf *conf)
+{
+	struct rte_dmadev *dev;
+
+	RTE_DMADEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+	RTE_FUNC_PTR_OR_ERR_RET(conf, -EINVAL);
+
+	dev = &rte_dmadevices[dev_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->queue_setup, -ENOTSUP);
+
+	return (*dev->dev_ops->queue_setup)(dev, conf);
+}
+
+int
+rte_dmadev_queue_release(uint16_t dev_id, uint16_t vq_id)
+{
+	struct rte_dmadev *dev;
+
+	RTE_DMADEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+
+	dev = &rte_dmadevices[dev_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->queue_release, -ENOTSUP);
+
+	return (*dev->dev_ops->queue_release)(dev, vq_id);
+}
+
+int
+rte_dmadev_queue_info_get(uint16_t dev_id, uint16_t vq_id,
+			  struct rte_dmadev_queue_info *info)
+{
+	struct rte_dmadev *dev;
+
+	RTE_DMADEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+	RTE_FUNC_PTR_OR_ERR_RET(info, -EINVAL);
+
+	dev = &rte_dmadevices[dev_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->queue_info_get, -ENOTSUP);
+
+	memset(info, 0, sizeof(struct rte_dmadev_queue_info));
+	return (*dev->dev_ops->queue_info_get)(dev, vq_id, info);
+}
+
+int
+rte_dmadev_stats_get(uint16_t dev_id, int vq_id,
+		     struct rte_dmadev_stats *stats)
+{
+	struct rte_dmadev *dev;
+
+	RTE_DMADEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+	RTE_FUNC_PTR_OR_ERR_RET(stats, -EINVAL);
+
+	dev = &rte_dmadevices[dev_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->stats_get, -ENOTSUP);
+
+	return (*dev->dev_ops->stats_get)(dev, vq_id, stats);
+}
+
+int
+rte_dmadev_stats_reset(uint16_t dev_id, int vq_id)
+{
+	struct rte_dmadev *dev;
+
+	RTE_DMADEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+
+	dev = &rte_dmadevices[dev_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->stats_reset, -ENOTSUP);
+
+	return (*dev->dev_ops->stats_reset)(dev, vq_id);
+}
+
+static int
+xstats_get_count(uint16_t dev_id)
+{
+	struct rte_dmadev *dev = &rte_dmadevices[dev_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->xstats_get_names, -ENOTSUP);
+
+	return (*dev->dev_ops->xstats_get_names)(dev, NULL, 0);
+}
+
+int
+rte_dmadev_xstats_names_get(uint16_t dev_id,
+			    struct rte_dmadev_xstats_name *xstats_names,
+			    uint32_t size)
+{
+	struct rte_dmadev *dev;
+	int cnt_expected_entries;
+
+	RTE_DMADEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+
+	cnt_expected_entries = xstats_get_count(dev_id);
+
+	if (xstats_names == NULL || cnt_expected_entries < 0 ||
+	    (int)size < cnt_expected_entries || size == 0)
+		return cnt_expected_entries;
+
+	dev = &rte_dmadevices[dev_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->xstats_get_names, -ENOTSUP);
+	return (*dev->dev_ops->xstats_get_names)(dev, xstats_names, size);
+}
+
+int
+rte_dmadev_xstats_get(uint16_t dev_id, const uint32_t ids[],
+		      uint64_t values[], uint32_t n)
+{
+	struct rte_dmadev *dev;
+
+	RTE_DMADEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+	RTE_FUNC_PTR_OR_ERR_RET(ids, -EINVAL);
+	RTE_FUNC_PTR_OR_ERR_RET(values, -EINVAL);
+
+	dev = &rte_dmadevices[dev_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->xstats_get, -ENOTSUP);
+
+	return (*dev->dev_ops->xstats_get)(dev, ids, values, n);
+}
+
+int
+rte_dmadev_xstats_reset(uint16_t dev_id, const uint32_t ids[], uint32_t nb_ids)
+{
+	struct rte_dmadev *dev;
+
+	RTE_DMADEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+
+	dev = &rte_dmadevices[dev_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->xstats_reset, -ENOTSUP);
+
+	return (*dev->dev_ops->xstats_reset)(dev, ids, nb_ids);
+}
+
+int
+rte_dmadev_selftest(uint16_t dev_id)
+{
+	struct rte_dmadev *dev;
+
+	RTE_DMADEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL);
+
+	dev = &rte_dmadevices[dev_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_selftest, -ENOTSUP);
+
+	return (*dev->dev_ops->dev_selftest)(dev_id);
+}
+
+static inline uint16_t
+rte_dmadev_find_free_device_index(void)
+{
+	uint16_t i;
+
+	for (i = 0; i < RTE_DMADEV_MAX_DEVS; i++) {
+		if (rte_dmadevices[i].attached == RTE_DMADEV_DETACHED)
+			return i;
+	}
+
+	return RTE_DMADEV_MAX_DEVS;
+}
+
+struct rte_dmadev *
+rte_dmadev_pmd_allocate(const char *name, size_t dev_priv_size, int socket_id)
+{
+	struct rte_dmadev *dev;
+	uint16_t dev_id;
+
+	if (rte_dmadev_get_dev_id(name) >= 0) {
+		RTE_DMADEV_LOG(ERR,
+			"device with name %s already allocated!", name);
+		return NULL;
+	}
+
+	dev_id = rte_dmadev_find_free_device_index();
+	if (dev_id == RTE_DMADEV_MAX_DEVS) {
+		RTE_DMADEV_LOG(ERR, "reached maximum number of DMA devices");
+		return NULL;
+	}
+
+	dev = &rte_dmadevices[dev_id];
+
+	if (dev_priv_size > 0) {
+		dev->dev_private = rte_zmalloc_socket("dmadev private",
+				     dev_priv_size,
+				     RTE_CACHE_LINE_SIZE,
+				     socket_id);
+		if (dev->dev_private == NULL) {
+			RTE_DMADEV_LOG(ERR,
+				"unable to allocate memory for dmadev");
+			return NULL;
+		}
+	}
+
+	dev->dev_id = dev_id;
+	dev->socket_id = socket_id;
+	dev->started = 0;
+	strlcpy(dev->name, name, RTE_DMADEV_NAME_MAX_LEN);
+
+	dev->attached = RTE_DMADEV_ATTACHED;
+
+	return dev;
+}
+
+int
+rte_dmadev_pmd_release(struct rte_dmadev *dev)
+{
+	int ret;
+
+	if (dev == NULL)
+		return -EINVAL;
+
+	ret = rte_dmadev_close(dev->dev_id);
+	if (ret != 0)
+		return ret;
+
+	if (dev->dev_private != NULL)
+		rte_free(dev->dev_private);
+
+	memset(dev, 0, sizeof(struct rte_dmadev));
+	dev->attached = RTE_DMADEV_DETACHED;
+
+	return 0;
+}
+
+RTE_LOG_REGISTER(libdmadev_logtype, lib.dmadev, INFO);
diff --git a/lib/dmadev/rte_dmadev.h b/lib/dmadev/rte_dmadev.h
new file mode 100644
index 0000000..f74fc6a
--- /dev/null
+++ b/lib/dmadev/rte_dmadev.h
@@ -0,0 +1,919 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2021 HiSilicon Limited.
+ */
+
+#ifndef _RTE_DMADEV_H_
+#define _RTE_DMADEV_H_
+
+/**
+ * @file rte_dmadev.h
+ *
+ * RTE DMA (Direct Memory Access) device APIs.
+ *
+ * The generic DMA device diagram:
+ *
+ *            ------------     ------------
+ *            | HW-queue |     | HW-queue |
+ *            ------------     ------------
+ *                   \            /
+ *                    \          /
+ *                     \        /
+ *                  ----------------
+ *                  |dma-controller|
+ *                  ----------------
+ *
+ *   The DMA could have multiple HW-queues, each HW-queue could have multiple
+ *   capabilities, e.g. whether to support fill operation, supported DMA
+ *   transfter direction and etc.
+ *
+ * The DMA framework is built on the following abstraction model:
+ *
+ *     ------------    ------------
+ *     |virt-queue|    |virt-queue|
+ *     ------------    ------------
+ *            \           /
+ *             \         /
+ *              \       /
+ *            ------------     ------------
+ *            | HW-queue |     | HW-queue |
+ *            ------------     ------------
+ *                   \            /
+ *                    \          /
+ *                     \        /
+ *                     ----------
+ *                     | dmadev |
+ *                     ----------
+ *
+ *   a) The DMA operation request must be submitted to the virt queue, virt
+ *      queues must be created based on HW queues, the DMA device could have
+ *      multiple HW queues.
+ *   b) The virt queues on the same HW-queue could represent different contexts,
+ *      e.g. user could create virt-queue-0 on HW-queue-0 for mem-to-mem
+ *      transfer scenario, and create virt-queue-1 on the same HW-queue for
+ *      mem-to-dev transfer scenario.
+ *   NOTE: user could also create multiple virt queues for mem-to-mem transfer
+ *         scenario as long as the corresponding driver supports.
+ *
+ * The control plane APIs include configure/queue_setup/queue_release/start/
+ * stop/reset/close, in order to start device work, the call sequence must be
+ * as follows:
+ *     - rte_dmadev_configure()
+ *     - rte_dmadev_queue_setup()
+ *     - rte_dmadev_start()
+ *
+ * The dataplane APIs include two parts:
+ *   a) The first part is the submission of operation requests:
+ *        - rte_dmadev_copy()
+ *        - rte_dmadev_copy_sg() - scatter-gather form of copy
+ *        - rte_dmadev_fill()
+ *        - rte_dmadev_fill_sg() - scatter-gather form of fill
+ *        - rte_dmadev_fence()   - add a fence force ordering between operations
+ *        - rte_dmadev_perform() - issue doorbell to hardware
+ *      These APIs could work with different virt queues which have different
+ *      contexts.
+ *      The first four APIs are used to submit the operation request to the virt
+ *      queue, if the submission is successful, a cookie (as type
+ *      'dma_cookie_t') is returned, otherwise a negative number is returned.
+ *   b) The second part is to obtain the result of requests:
+ *        - rte_dmadev_completed()
+ *            - return the number of operation requests completed successfully.
+ *        - rte_dmadev_completed_fails()
+ *            - return the number of operation requests failed to complete.
+ *
+ * The misc APIs include info_get/queue_info_get/stats/xstats/selftest, provide
+ * information query and self-test capabilities.
+ *
+ * About the dataplane APIs MT-safe, there are two dimensions:
+ *   a) For one virt queue, the submit/completion API could be MT-safe,
+ *      e.g. one thread do submit operation, another thread do completion
+ *      operation.
+ *      If driver support it, then declare RTE_DMA_DEV_CAPA_MT_VQ.
+ *      If driver don't support it, it's up to the application to guarantee
+ *      MT-safe.
+ *   b) For multiple virt queues on the same HW queue, e.g. one thread do
+ *      operation on virt-queue-0, another thread do operation on virt-queue-1.
+ *      If driver support it, then declare RTE_DMA_DEV_CAPA_MT_MVQ.
+ *      If driver don't support it, it's up to the application to guarantee
+ *      MT-safe.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rte_common.h>
+#include <rte_memory.h>
+#include <rte_errno.h>
+#include <rte_compat.h>
+
+/**
+ * dma_cookie_t - an opaque DMA cookie
+ *
+ * If dma_cookie_t is >=0 it's a DMA operation request cookie, <0 it's a error
+ * code.
+ * When using cookies, comply with the following rules:
+ * a) Cookies for each virtual queue are independent.
+ * b) For a virt queue, the cookie are monotonically incremented, when it reach
+ *    the INT_MAX, it wraps back to zero.
+ * c) The initial cookie of a virt queue is zero, after the device is stopped or
+ *    reset, the virt queue's cookie needs to be reset to zero.
+ * Example:
+ *    step-1: start one dmadev
+ *    step-2: enqueue a copy operation, the cookie return is 0
+ *    step-3: enqueue a copy operation again, the cookie return is 1
+ *    ...
+ *    step-101: stop the dmadev
+ *    step-102: start the dmadev
+ *    step-103: enqueue a copy operation, the cookie return is 0
+ *    ...
+ */
+typedef int32_t dma_cookie_t;
+
+/**
+ * dma_scatterlist - can hold scatter DMA operation request
+ */
+struct dma_scatterlist {
+	void *src;
+	void *dst;
+	uint32_t length;
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Get the total number of DMA devices that have been successfully
+ * initialised.
+ *
+ * @return
+ *   The total number of usable DMA devices.
+ */
+__rte_experimental
+uint16_t
+rte_dmadev_count(void);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Get the device identifier for the named DMA device.
+ *
+ * @param name
+ *   DMA device name to select the DMA device identifier.
+ *
+ * @return
+ *   Returns DMA device identifier on success.
+ *   - <0: Failure to find named DMA device.
+ */
+__rte_experimental
+int
+rte_dmadev_get_dev_id(const char *name);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Return the NUMA socket to which a device is connected.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ *
+ * @return
+ *   The NUMA socket id to which the device is connected or
+ *   a default of zero if the socket could not be determined.
+ *   - -EINVAL: dev_id value is out of range.
+ */
+__rte_experimental
+int
+rte_dmadev_socket_id(uint16_t dev_id);
+
+/**
+ * The capabilities of a DMA device
+ */
+#define RTE_DMA_DEV_CAPA_M2M	(1ull << 0) /**< Support mem-to-mem transfer */
+#define RTE_DMA_DEV_CAPA_M2D	(1ull << 1) /**< Support mem-to-dev transfer */
+#define RTE_DMA_DEV_CAPA_D2M	(1ull << 2) /**< Support dev-to-mem transfer */
+#define RTE_DMA_DEV_CAPA_D2D	(1ull << 3) /**< Support dev-to-dev transfer */
+#define RTE_DMA_DEV_CAPA_COPY	(1ull << 4) /**< Support copy ops */
+#define RTE_DMA_DEV_CAPA_FILL	(1ull << 5) /**< Support fill ops */
+#define RTE_DMA_DEV_CAPA_SG	(1ull << 6) /**< Support scatter-gather ops */
+#define RTE_DMA_DEV_CAPA_FENCE	(1ull << 7) /**< Support fence ops */
+#define RTE_DMA_DEV_CAPA_IOVA	(1ull << 8) /**< Support IOVA as DMA address */
+#define RTE_DMA_DEV_CAPA_VA	(1ull << 9) /**< Support VA as DMA address */
+#define RTE_DMA_DEV_CAPA_MT_VQ	(1ull << 10) /**< Support MT-safe of one virt queue */
+#define RTE_DMA_DEV_CAPA_MT_MVQ	(1ull << 11) /**< Support MT-safe of multiple virt queues */
+
+/**
+ * A structure used to retrieve the contextual information of
+ * an DMA device
+ */
+struct rte_dmadev_info {
+	/**
+	 * Fields filled by framewok
+	 */
+	struct rte_device *device; /**< Generic Device information */
+	const char *driver_name; /**< Device driver name */
+	int socket_id; /**< Socket ID where memory is allocated */
+
+	/**
+	 * Specification fields filled by driver
+	 */
+	uint64_t dev_capa; /**< Device capabilities (RTE_DMA_DEV_CAPA_) */
+	uint16_t max_hw_queues; /**< Maximum number of HW queues. */
+	uint16_t max_vqs_per_hw_queue;
+	/**< Maximum number of virt queues to allocate per HW queue */
+	uint16_t max_desc;
+	/**< Maximum allowed number of virt queue descriptors */
+	uint16_t min_desc;
+	/**< Minimum allowed number of virt queue descriptors */
+
+	/**
+	 * Status fields filled by driver
+	 */
+	uint16_t nb_hw_queues; /**< Number of HW queues configured */
+	uint16_t nb_vqs; /**< Number of virt queues configured */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Retrieve the contextual information of a DMA device.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ *
+ * @param[out] dev_info
+ *   A pointer to a structure of type *rte_dmadev_info* to be filled with the
+ *   contextual information of the device.
+ * @return
+ *   - =0: Success, driver updates the contextual information of the DMA device
+ *   - <0: Error code returned by the driver info get function.
+ *
+ */
+__rte_experimental
+int
+rte_dmadev_info_get(uint16_t dev_id, struct rte_dmadev_info *dev_info);
+
+/**
+ * dma_address_type
+ */
+enum dma_address_type {
+	DMA_ADDRESS_TYPE_IOVA, /**< Use IOVA as dma address */
+	DMA_ADDRESS_TYPE_VA, /**< Use VA as dma address */
+};
+
+/**
+ * A structure used to configure a DMA device.
+ */
+struct rte_dmadev_conf {
+	enum dma_address_type addr_type; /**< Address type to used */
+	uint16_t nb_hw_queues; /**< Number of HW-queues enable to use */
+	uint16_t max_vqs; /**< Maximum number of virt queues to use */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Configure a DMA device.
+ *
+ * This function must be invoked first before any other function in the
+ * API. This function can also be re-invoked when a device is in the
+ * stopped state.
+ *
+ * The caller may use rte_dmadev_info_get() to get the capability of each
+ * resources available for this DMA device.
+ *
+ * @param dev_id
+ *   The identifier of the device to configure.
+ * @param dev_conf
+ *   The DMA device configuration structure encapsulated into rte_dmadev_conf
+ *   object.
+ *
+ * @return
+ *   - =0: Success, device configured.
+ *   - <0: Error code returned by the driver configuration function.
+ */
+__rte_experimental
+int
+rte_dmadev_configure(uint16_t dev_id, const struct rte_dmadev_conf *dev_conf);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start a DMA device.
+ *
+ * The device start step is the last one and consists of setting the DMA
+ * to start accepting jobs.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ *
+ * @return
+ *   - =0: Success, device started.
+ *   - <0: Error code returned by the driver start function.
+ */
+__rte_experimental
+int
+rte_dmadev_start(uint16_t dev_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Stop a DMA device.
+ *
+ * The device can be restarted with a call to rte_dmadev_start()
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ *
+ * @return
+ *   - =0: Success, device stopped.
+ *   - <0: Error code returned by the driver stop function.
+ */
+__rte_experimental
+int
+rte_dmadev_stop(uint16_t dev_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Close a DMA device.
+ *
+ * The device cannot be restarted after this call.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ *
+ * @return
+ *  - =0: Successfully closing device
+ *  - <0: Failure to close device
+ */
+__rte_experimental
+int
+rte_dmadev_close(uint16_t dev_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Reset a DMA device.
+ *
+ * This is different from cycle of rte_dmadev_start->rte_dmadev_stop in the
+ * sense similar to hard or soft reset.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ *
+ * @return
+ *   - =0: Successful reset device.
+ *   - <0: Failure to reset device.
+ *   - (-ENOTSUP): If the device doesn't support this function.
+ */
+__rte_experimental
+int
+rte_dmadev_reset(uint16_t dev_id);
+
+/**
+ * dma_transfer_direction
+ */
+enum dma_transfer_direction {
+	DMA_MEM_TO_MEM,
+	DMA_MEM_TO_DEV,
+	DMA_DEV_TO_MEM,
+	DMA_DEV_TO_DEV,
+};
+
+/**
+ * A structure used to configure a DMA virt queue.
+ */
+struct rte_dmadev_queue_conf {
+	enum dma_transfer_direction direction;
+	/**< Associated transfer direction */
+	uint16_t hw_queue_id; /**< The HW queue on which to create virt queue */
+	uint16_t nb_desc; /**< Number of descriptor for this virt queue */
+	uint64_t dev_flags; /**< Device specific flags */
+	void *dev_ctx; /**< Device specific context */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Allocate and set up a virt queue.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param conf
+ *   The queue configuration structure encapsulated into rte_dmadev_queue_conf
+ *   object.
+ *
+ * @return
+ *   - >=0: Allocate virt queue success, it is virt queue id.
+ *   - <0: Error code returned by the driver queue setup function.
+ */
+__rte_experimental
+int
+rte_dmadev_queue_setup(uint16_t dev_id,
+		       const struct rte_dmadev_queue_conf *conf);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Release a virt queue.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vq_id
+ *   The identifier of virt queue which return by queue setup.
+ *
+ * @return
+ *   - =0: Successful release the virt queue.
+ *   - <0: Error code returned by the driver queue release function.
+ */
+__rte_experimental
+int
+rte_dmadev_queue_release(uint16_t dev_id, uint16_t vq_id);
+
+/**
+ * A structure used to retrieve information of a DMA virt queue.
+ */
+struct rte_dmadev_queue_info {
+	enum dma_transfer_direction direction;
+	/**< Associated transfer direction */
+	uint16_t hw_queue_id; /**< The HW queue on which to create virt queue */
+	uint16_t nb_desc; /**< Number of descriptor for this virt queue */
+	uint64_t dev_flags; /**< Device specific flags */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Retrieve information of a DMA virt queue.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vq_id
+ *   The identifier of virt queue which return by queue setup.
+ * @param[out] info
+ *   The queue info structure encapsulated into rte_dmadev_queue_info object.
+ *
+ * @return
+ *   - =0: Successful retrieve information.
+ *   - <0: Error code returned by the driver queue release function.
+ */
+__rte_experimental
+int
+rte_dmadev_queue_info_get(uint16_t dev_id, uint16_t vq_id,
+			  struct rte_dmadev_queue_info *info);
+
+#include "rte_dmadev_core.h"
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Enqueue a copy operation onto the DMA virt queue.
+ *
+ * This queues up a copy operation to be performed by hardware, but does not
+ * trigger hardware to begin that operation.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vq_id
+ *   The identifier of virt queue.
+ * @param src
+ *   The address of the source buffer.
+ * @param dst
+ *   The address of the destination buffer.
+ * @param length
+ *   The length of the data to be copied.
+ * @param flags
+ *   An opaque flags for this operation.
+ *
+ * @return
+ *   dma_cookie_t: please refer to the corresponding definition.
+ *
+ * NOTE: The caller must ensure that the input parameter is valid and the
+ *       corresponding device supports the operation.
+ */
+__rte_experimental
+static inline dma_cookie_t
+rte_dmadev_copy(uint16_t dev_id, uint16_t vq_id, void *src, void *dst,
+		uint32_t length, uint64_t flags)
+{
+	struct rte_dmadev *dev = &rte_dmadevices[dev_id];
+	return (*dev->copy)(dev, vq_id, src, dst, length, flags);
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Enqueue a scatter list copy operation onto the DMA virt queue.
+ *
+ * This queues up a scatter list copy operation to be performed by hardware,
+ * but does not trigger hardware to begin that operation.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vq_id
+ *   The identifier of virt queue.
+ * @param sg
+ *   The pointer of scatterlist.
+ * @param sg_len
+ *   The number of scatterlist elements.
+ * @param flags
+ *   An opaque flags for this operation.
+ *
+ * @return
+ *   dma_cookie_t: please refer to the corresponding definition.
+ *
+ * NOTE: The caller must ensure that the input parameter is valid and the
+ *       corresponding device supports the operation.
+ */
+__rte_experimental
+static inline dma_cookie_t
+rte_dmadev_copy_sg(uint16_t dev_id, uint16_t vq_id,
+		   const struct dma_scatterlist *sg,
+		   uint32_t sg_len, uint64_t flags)
+{
+	struct rte_dmadev *dev = &rte_dmadevices[dev_id];
+	return (*dev->copy_sg)(dev, vq_id, sg, sg_len, flags);
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Enqueue a fill operation onto the DMA virt queue
+ *
+ * This queues up a fill operation to be performed by hardware, but does not
+ * trigger hardware to begin that operation.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vq_id
+ *   The identifier of virt queue.
+ * @param pattern
+ *   The pattern to populate the destination buffer with.
+ * @param dst
+ *   The address of the destination buffer.
+ * @param length
+ *   The length of the destination buffer.
+ * @param flags
+ *   An opaque flags for this operation.
+ *
+ * @return
+ *   dma_cookie_t: please refer to the corresponding definition.
+ *
+ * NOTE: The caller must ensure that the input parameter is valid and the
+ *       corresponding device supports the operation.
+ */
+__rte_experimental
+static inline dma_cookie_t
+rte_dmadev_fill(uint16_t dev_id, uint16_t vq_id, uint64_t pattern,
+		void *dst, uint32_t length, uint64_t flags)
+{
+	struct rte_dmadev *dev = &rte_dmadevices[dev_id];
+	return (*dev->fill)(dev, vq_id, pattern, dst, length, flags);
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Enqueue a scatter list fill operation onto the DMA virt queue
+ *
+ * This queues up a scatter list fill operation to be performed by hardware,
+ * but does not trigger hardware to begin that operation.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vq_id
+ *   The identifier of virt queue.
+ * @param pattern
+ *   The pattern to populate the destination buffer with.
+ * @param sg
+ *   The pointer of scatterlist.
+ * @param sg_len
+ *   The number of scatterlist elements.
+ * @param flags
+ *   An opaque flags for this operation.
+ *
+ * @return
+ *   dma_cookie_t: please refer to the corresponding definition.
+ *
+ * NOTE: The caller must ensure that the input parameter is valid and the
+ *       corresponding device supports the operation.
+ */
+__rte_experimental
+static inline dma_cookie_t
+rte_dmadev_fill_sg(uint16_t dev_id, uint16_t vq_id, uint64_t pattern,
+		   const struct dma_scatterlist *sg, uint32_t sg_len,
+		   uint64_t flags)
+{
+	struct rte_dmadev *dev = &rte_dmadevices[dev_id];
+	return (*dev->fill_sg)(dev, vq_id, pattern, sg, sg_len, flags);
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Add a fence to force ordering between operations
+ *
+ * This adds a fence to a sequence of operations to enforce ordering, such that
+ * all operations enqueued before the fence must be completed before operations
+ * after the fence.
+ * NOTE: Since this fence may be added as a flag to the last operation enqueued,
+ * this API may not function correctly when called immediately after an
+ * "rte_dmadev_perform" call i.e. before any new operations are enqueued.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vq_id
+ *   The identifier of virt queue.
+ *
+ * @return
+ *   - =0: Successful add fence.
+ *   - <0: Failure to add fence.
+ *
+ * NOTE: The caller must ensure that the input parameter is valid and the
+ *       corresponding device supports the operation.
+ */
+__rte_experimental
+static inline int
+rte_dmadev_fence(uint16_t dev_id, uint16_t vq_id)
+{
+	struct rte_dmadev *dev = &rte_dmadevices[dev_id];
+	return (*dev->fence)(dev, vq_id);
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Trigger hardware to begin performing enqueued operations
+ *
+ * This API is used to write the "doorbell" to the hardware to trigger it
+ * to begin the operations previously enqueued by rte_dmadev_copy/fill()
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vq_id
+ *   The identifier of virt queue.
+ *
+ * @return
+ *   - =0: Successful trigger hardware.
+ *   - <0: Failure to trigger hardware.
+ *
+ * NOTE: The caller must ensure that the input parameter is valid and the
+ *       corresponding device supports the operation.
+ */
+__rte_experimental
+static inline int
+rte_dmadev_perform(uint16_t dev_id, uint16_t vq_id)
+{
+	struct rte_dmadev *dev = &rte_dmadevices[dev_id];
+	return (*dev->perform)(dev, vq_id);
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Returns the number of operations that have been successful completed.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vq_id
+ *   The identifier of virt queue.
+ * @param nb_cpls
+ *   The maximum number of completed operations that can be processed.
+ * @param[out] cookie
+ *   The last completed operation's cookie.
+ * @param[out] has_error
+ *   Indicates if there are transfer error.
+ *
+ * @return
+ *   The number of operations that successful completed.
+ *
+ * NOTE: The caller must ensure that the input parameter is valid and the
+ *       corresponding device supports the operation.
+ */
+__rte_experimental
+static inline uint16_t
+rte_dmadev_completed(uint16_t dev_id, uint16_t vq_id, const uint16_t nb_cpls,
+		     dma_cookie_t *cookie, bool *has_error)
+{
+	struct rte_dmadev *dev = &rte_dmadevices[dev_id];
+	has_error = false;
+	return (*dev->completed)(dev, vq_id, nb_cpls, cookie, has_error);
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Returns the number of operations that failed to complete.
+ * NOTE: This API was used when rte_dmadev_completed has_error was set.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vq_id
+ *   The identifier of virt queue.
+ * @param nb_status
+ *   Indicates the size of status array.
+ * @param[out] status
+ *   The error code of operations that failed to complete.
+ * @param[out] cookie
+ *   The last failed completed operation's cookie.
+ *
+ * @return
+ *   The number of operations that failed to complete.
+ *
+ * NOTE: The caller must ensure that the input parameter is valid and the
+ *       corresponding device supports the operation.
+ */
+__rte_experimental
+static inline uint16_t
+rte_dmadev_completed_fails(uint16_t dev_id, uint16_t vq_id,
+			   const uint16_t nb_status, uint32_t *status,
+			   dma_cookie_t *cookie)
+{
+	struct rte_dmadev *dev = &rte_dmadevices[dev_id];
+	return (*dev->completed_fails)(dev, vq_id, nb_status, status, cookie);
+}
+
+struct rte_dmadev_stats {
+	uint64_t enqueue_fail_count;
+	/**< Conut of all operations which failed enqueued */
+	uint64_t enqueued_count;
+	/**< Count of all operations which successful enqueued */
+	uint64_t completed_fail_count;
+	/**< Count of all operations which failed to complete */
+	uint64_t completed_count;
+	/**< Count of all operations which successful complete */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Retrieve basic statistics of a or all DMA virt queue(s).
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vq_id
+ *   The identifier of virt queue, -1 means all virt queues.
+ * @param[out] stats
+ *   The basic statistics structure encapsulated into rte_dmadev_stats
+ *   object.
+ *
+ * @return
+ *   - =0: Successful retrieve stats.
+ *   - <0: Failure to retrieve stats.
+ */
+__rte_experimental
+int
+rte_dmadev_stats_get(uint16_t dev_id, int vq_id,
+		     struct rte_dmadev_stats *stats);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Reset basic statistics of a or all DMA virt queue(s).
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param vq_id
+ *   The identifier of virt queue, -1 means all virt queues.
+ *
+ * @return
+ *   - =0: Successful retrieve stats.
+ *   - <0: Failure to retrieve stats.
+ */
+__rte_experimental
+int
+rte_dmadev_stats_reset(uint16_t dev_id, int vq_id);
+
+/** Maximum name length for extended statistics counters */
+#define RTE_DMA_DEV_XSTATS_NAME_SIZE 64
+
+/**
+ * A name-key lookup element for extended statistics.
+ *
+ * This structure is used to map between names and ID numbers
+ * for extended ethdev statistics.
+ */
+struct rte_dmadev_xstats_name {
+	char name[RTE_DMA_DEV_XSTATS_NAME_SIZE];
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Retrieve names of extended statistics of a DMA device.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param[out] xstats_names
+ *   Block of memory to insert names into. Must be at least size in capacity.
+ *   If set to NULL, function returns required capacity.
+ * @param size
+ *   Capacity of xstats_names (number of names).
+ * @return
+ *   - positive value lower or equal to size: success. The return value
+ *     is the number of entries filled in the stats table.
+ *   - positive value higher than size: error, the given statistics table
+ *     is too small. The return value corresponds to the size that should
+ *     be given to succeed. The entries in the table are not valid and
+ *     shall not be used by the caller.
+ *   - negative value on error.
+ */
+__rte_experimental
+int
+rte_dmadev_xstats_names_get(uint16_t dev_id,
+			    struct rte_dmadev_xstats_name *xstats_names,
+			    uint32_t size);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Retrieve extended statistics of a DMA device.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param ids
+ *   The id numbers of the stats to get. The ids can be got from the stat
+ *   position in the stat list from rte_dmadev_get_xstats_names().
+ * @param[out] values
+ *   The values for each stats request by ID.
+ * @param n
+ *   The number of stats requested.
+ *
+ * @return
+ *   - positive value: number of stat entries filled into the values array.
+ *   - negative value on error.
+ */
+__rte_experimental
+int
+rte_dmadev_xstats_get(uint16_t dev_id, const uint32_t ids[],
+		      uint64_t values[], uint32_t n);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Reset the values of the xstats of the selected component in the device.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ * @param ids
+ *   Selects specific statistics to be reset. When NULL, all statistics
+ *   will be reset. If non-NULL, must point to array of at least
+ *   *nb_ids* size.
+ * @param nb_ids
+ *   The number of ids available from the *ids* array. Ignored when ids is NULL.
+ *
+ * @return
+ *   - zero: successfully reset the statistics to zero.
+ *   - negative value on error.
+ */
+__rte_experimental
+int
+rte_dmadev_xstats_reset(uint16_t dev_id, const uint32_t ids[], uint32_t nb_ids);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Trigger the dmadev self test.
+ *
+ * @param dev_id
+ *   The identifier of the device.
+ *
+ * @return
+ *   - 0: Selftest successful.
+ *   - -ENOTSUP if the device doesn't support selftest
+ *   - other values < 0 on failure.
+ */
+__rte_experimental
+int
+rte_dmadev_selftest(uint16_t dev_id);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_DMADEV_H_ */
diff --git a/lib/dmadev/rte_dmadev_core.h b/lib/dmadev/rte_dmadev_core.h
new file mode 100644
index 0000000..a3afea2
--- /dev/null
+++ b/lib/dmadev/rte_dmadev_core.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2021 HiSilicon Limited.
+ */
+
+#ifndef _RTE_DMADEV_CORE_H_
+#define _RTE_DMADEV_CORE_H_
+
+/**
+ * @file
+ *
+ * RTE DMA Device internal header.
+ *
+ * This header contains internal data types. But they are still part of the
+ * public API because they are used by inline public functions.
+ */
+
+struct rte_dmadev;
+
+typedef dma_cookie_t (*dmadev_copy_t)(struct rte_dmadev *dev, uint16_t vq_id,
+				      void *src, void *dst,
+				      uint32_t length, uint64_t flags);
+/**< @internal Function used to enqueue a copy operation. */
+
+typedef dma_cookie_t (*dmadev_copy_sg_t)(struct rte_dmadev *dev, uint16_t vq_id,
+					 const struct dma_scatterlist *sg,
+					 uint32_t sg_len, uint64_t flags);
+/**< @internal Function used to enqueue a scatter list copy operation. */
+
+typedef dma_cookie_t (*dmadev_fill_t)(struct rte_dmadev *dev, uint16_t vq_id,
+				      uint64_t pattern, void *dst,
+				      uint32_t length, uint64_t flags);
+/**< @internal Function used to enqueue a fill operation. */
+
+typedef dma_cookie_t (*dmadev_fill_sg_t)(struct rte_dmadev *dev, uint16_t vq_id,
+			uint64_t pattern, const struct dma_scatterlist *sg,
+			uint32_t sg_len, uint64_t flags);
+/**< @internal Function used to enqueue a scatter list fill operation. */
+
+typedef int (*dmadev_fence_t)(struct rte_dmadev *dev, uint16_t vq_id);
+/**< @internal Function used to add a fence ordering between operations. */
+
+typedef int (*dmadev_perform_t)(struct rte_dmadev *dev, uint16_t vq_id);
+/**< @internal Function used to trigger hardware to begin performing. */
+
+typedef uint16_t (*dmadev_completed_t)(struct rte_dmadev *dev, uint16_t vq_id,
+				       const uint16_t nb_cpls,
+				       dma_cookie_t *cookie, bool *has_error);
+/**< @internal Function used to return number of successful completed operations */
+
+typedef uint16_t (*dmadev_completed_fails_t)(struct rte_dmadev *dev,
+			uint16_t vq_id, const uint16_t nb_status,
+			uint32_t *status, dma_cookie_t *cookie);
+/**< @internal Function used to return number of failed completed operations */
+
+#define RTE_DMADEV_NAME_MAX_LEN	64 /**< Max length of name of DMA PMD */
+
+struct rte_dmadev_ops;
+
+/**
+ * The data structure associated with each DMA device.
+ */
+struct rte_dmadev {
+	/**< Enqueue a copy operation onto the DMA device. */
+	dmadev_copy_t copy;
+	/**< Enqueue a scatter list copy operation onto the DMA device. */
+	dmadev_copy_sg_t copy_sg;
+	/**< Enqueue a fill operation onto the DMA device. */
+	dmadev_fill_t fill;
+	/**< Enqueue a scatter list fill operation onto the DMA device. */
+	dmadev_fill_sg_t fill_sg;
+	/**< Add a fence to force ordering between operations. */
+	dmadev_fence_t fence;
+	/**< Trigger hardware to begin performing enqueued operations. */
+	dmadev_perform_t perform;
+	/**< Returns the number of operations that successful completed. */
+	dmadev_completed_t completed;
+	/**< Returns the number of operations that failed to complete. */
+	dmadev_completed_fails_t completed_fails;
+
+	void *dev_private; /**< PMD-specific private data */
+	const struct rte_dmadev_ops *dev_ops; /**< Functions exported by PMD */
+
+	uint16_t dev_id; /**< Device ID for this instance */
+	int socket_id; /**< Socket ID where memory is allocated */
+	struct rte_device *device;
+	/**< Device info. supplied during device initialization */
+	const char *driver_name; /**< Driver info. supplied by probing */
+	char name[RTE_DMADEV_NAME_MAX_LEN]; /**< Device name */
+
+	RTE_STD_C11
+	uint8_t attached : 1; /**< Flag indicating the device is attached */
+	uint8_t started : 1; /**< Device state: STARTED(1)/STOPPED(0) */
+
+} __rte_cache_aligned;
+
+extern struct rte_dmadev rte_dmadevices[];
+
+#endif /* _RTE_DMADEV_CORE_H_ */
diff --git a/lib/dmadev/rte_dmadev_pmd.h b/lib/dmadev/rte_dmadev_pmd.h
new file mode 100644
index 0000000..ef03cf7
--- /dev/null
+++ b/lib/dmadev/rte_dmadev_pmd.h
@@ -0,0 +1,210 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2021 HiSilicon Limited.
+ */
+
+#ifndef _RTE_DMADEV_PMD_H_
+#define _RTE_DMADEV_PMD_H_
+
+/** @file
+ * RTE DMA PMD APIs
+ *
+ * @note
+ * Driver facing APIs for a DMA device. These are not to be called directly by
+ * any application.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <string.h>
+
+#include <rte_dev.h>
+#include <rte_log.h>
+#include <rte_common.h>
+
+#include "rte_dmadev.h"
+
+extern int libdmadev_logtype;
+
+#define RTE_DMADEV_LOG(level, fmt, args...) \
+	rte_log(RTE_LOG_ ## level, libdmadev_logtype, "%s(): " fmt "\n", \
+		__func__, ##args)
+
+/* Macros to check for valid device */
+#define RTE_DMADEV_VALID_DEVID_OR_ERR_RET(dev_id, retval) do { \
+	if (!rte_dmadev_pmd_is_valid_dev((dev_id))) { \
+		RTE_DMADEV_LOG(ERR, "Invalid dev_id=%d", dev_id); \
+		return retval; \
+	} \
+} while (0)
+
+#define RTE_DMADEV_VALID_DEVID_OR_RET(dev_id) do { \
+	if (!rte_dmadev_pmd_is_valid_dev((dev_id))) { \
+		RTE_DMADEV_LOG(ERR, "Invalid dev_id=%d", dev_id); \
+		return; \
+	} \
+} while (0)
+
+#define RTE_DMADEV_DETACHED  0
+#define RTE_DMADEV_ATTACHED  1
+
+/**
+ * Validate if the DMA device index is a valid attached DMA device.
+ *
+ * @param dev_id
+ *   DMA device index.
+ *
+ * @return
+ *   - If the device index is valid (1) or not (0).
+ */
+static inline unsigned
+rte_dmadev_pmd_is_valid_dev(uint16_t dev_id)
+{
+	struct rte_dmadev *dev;
+
+	if (dev_id >= RTE_DMADEV_MAX_DEVS)
+		return 0;
+
+	dev = &rte_dmadevices[dev_id];
+	if (dev->attached != RTE_DMADEV_ATTACHED)
+		return 0;
+	else
+		return 1;
+}
+
+/**
+ * Definitions of control-plane functions exported by a driver through the
+ * generic structure of type *rte_dmadev_ops* supplied in the *rte_dmadev*
+ * structure associated with a device.
+ */
+
+typedef int (*dmadev_info_get_t)(struct rte_dmadev *dev,
+				 struct rte_dmadev_info *dev_info);
+/**< @internal Function used to get device information of a device. */
+
+typedef int (*dmadev_configure_t)(struct rte_dmadev *dev,
+				  const struct rte_dmadev_conf *dev_conf);
+/**< @internal Function used to configure a device. */
+
+typedef int (*dmadev_start_t)(struct rte_dmadev *dev);
+/**< @internal Function used to start a configured device. */
+
+typedef int (*dmadev_stop_t)(struct rte_dmadev *dev);
+/**< @internal Function used to stop a configured device. */
+
+typedef int (*dmadev_close_t)(struct rte_dmadev *dev);
+/**< @internal Function used to close a configured device. */
+
+typedef int (*dmadev_reset_t)(struct rte_dmadev *dev);
+/**< @internal Function used to reset a configured device. */
+
+typedef int (*dmadev_queue_setup_t)(struct rte_dmadev *dev,
+				    const struct rte_dmadev_queue_conf *conf);
+/**< @internal Function used to allocate and set up a virt queue. */
+
+typedef int (*dmadev_queue_release_t)(struct rte_dmadev *dev, uint16_t vq_id);
+/**< @internal Function used to release a virt queue. */
+
+typedef int (*dmadev_queue_info_t)(struct rte_dmadev *dev, uint16_t vq_id,
+				   struct rte_dmadev_queue_info *info);
+/**< @internal Function used to retrieve information of a virt queue. */
+
+typedef int (*dmadev_stats_get_t)(struct rte_dmadev *dev, int vq_id,
+				  struct rte_dmadev_stats *stats);
+/**< @internal Function used to retrieve basic statistics. */
+
+typedef int (*dmadev_stats_reset_t)(struct rte_dmadev *dev, int vq_id);
+/**< @internal Function used to reset basic statistics. */
+
+typedef int (*dmadev_xstats_get_names_t)(const struct rte_dmadev *dev,
+		struct rte_dmadev_xstats_name *xstats_names,
+		uint32_t size);
+/**< @internal Function used to get names of extended stats. */
+
+typedef int (*dmadev_xstats_get_t)(const struct rte_dmadev *dev,
+		const uint32_t ids[], uint64_t values[], uint32_t n);
+/**< @internal Function used to retrieve extended stats. */
+
+typedef int (*dmadev_xstats_reset_t)(struct rte_dmadev *dev,
+				     const uint32_t ids[], uint32_t nb_ids);
+/**< @internal Function used to reset extended stats. */
+
+typedef int (*dmadev_selftest_t)(uint16_t dev_id);
+/**< @internal Function used to start dmadev selftest. */
+
+/** DMA device operations function pointer table */
+struct rte_dmadev_ops {
+	/**< Get device info. */
+	dmadev_info_get_t dev_info_get;
+	/**< Configure device. */
+	dmadev_configure_t dev_configure;
+	/**< Start device. */
+	dmadev_start_t dev_start;
+	/**< Stop device. */
+	dmadev_stop_t dev_stop;
+	/**< Close device. */
+	dmadev_close_t dev_close;
+	/**< Reset device. */
+	dmadev_reset_t dev_reset;
+
+	/**< Allocate and set up a virt queue. */
+	dmadev_queue_setup_t queue_setup;
+	/**< Release a virt queue. */
+	dmadev_queue_release_t queue_release;
+	/**< Retrieve information of a virt queue */
+	dmadev_queue_info_t queue_info_get;
+
+	/**< Get basic statistics. */
+	dmadev_stats_get_t stats_get;
+	/**< Reset basic statistics. */
+	dmadev_stats_reset_t stats_reset;
+	/**< Get names of extended stats. */
+	dmadev_xstats_get_names_t xstats_get_names;
+	/**< Get extended statistics. */
+	dmadev_xstats_get_t xstats_get;
+	/**< Reset extended statistics values. */
+	dmadev_xstats_reset_t xstats_reset;
+
+	/**< Device selftest function */
+	dmadev_selftest_t dev_selftest;
+};
+
+/**
+ * Allocates a new dmadev slot for an DMA device and returns the pointer
+ * to that slot for the driver to use.
+ *
+ * @param name
+ *   Unique identifier name for each device
+ * @param dev_private_size
+ *   Size of private data memory allocated within rte_dmadev object.
+ *   Set to 0 to disable internal memory allocation and allow for
+ *   self-allocation.
+ * @param socket_id
+ *   Socket to allocate resources on.
+ *
+ * @return
+ *   - NULL: Failure to allocate
+ *   - Other: The rte_dmadev structure pointer for the new device
+ */
+struct rte_dmadev *
+rte_dmadev_pmd_allocate(const char *name, size_t dev_private_size,
+			int socket_id);
+
+/**
+ * Release the specified dmadev device.
+ *
+ * @param dev
+ *   The *dmadev* pointer is the address of the *rte_dmadev* structure.
+ *
+ * @return
+ *   - 0 on success, negative on error
+ */
+int
+rte_dmadev_pmd_release(struct rte_dmadev *dev);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_DMADEV_PMD_H_ */
diff --git a/lib/dmadev/version.map b/lib/dmadev/version.map
new file mode 100644
index 0000000..383b3ca
--- /dev/null
+++ b/lib/dmadev/version.map
@@ -0,0 +1,32 @@
+EXPERIMENTAL {
+	global:
+
+	rte_dmadev_count;
+	rte_dmadev_get_dev_id;
+	rte_dmadev_socket_id;
+	rte_dmadev_info_get;
+	rte_dmadev_configure;
+	rte_dmadev_start;
+	rte_dmadev_stop;
+	rte_dmadev_close;
+	rte_dmadev_reset;
+	rte_dmadev_queue_setup;
+	rte_dmadev_queue_release;
+	rte_dmadev_queue_info_get;
+	rte_dmadev_copy;
+	rte_dmadev_copy_sg;
+	rte_dmadev_fill;
+	rte_dmadev_fill_sg;
+	rte_dmadev_fence;
+	rte_dmadev_perform;
+	rte_dmadev_completed;
+	rte_dmadev_completed_fails;
+	rte_dmadev_stats_get;
+	rte_dmadev_stats_reset;
+	rte_dmadev_xstats_names_get;
+	rte_dmadev_xstats_get;
+	rte_dmadev_xstats_reset;
+	rte_dmadev_selftest;
+
+	local: *;
+};
diff --git a/lib/meson.build b/lib/meson.build
index 1673ca4..68d239f 100644
--- a/lib/meson.build
+++ b/lib/meson.build
@@ -60,6 +60,7 @@ libraries = [
         'bpf',
         'graph',
         'node',
+        'dmadev',
 ]
 
 if is_windows
-- 
2.8.1


^ permalink raw reply related	[flat|nested] 339+ messages in thread

end of thread, other threads:[~2021-10-17 19:17 UTC | newest]

Thread overview: 339+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-02 13:18 [dpdk-dev] [PATCH] dmadev: introduce DMA device library Chengwen Feng
2021-07-02 13:59 ` Bruce Richardson
2021-07-04  9:30 ` Jerin Jacob
2021-07-05 10:52   ` Bruce Richardson
2021-07-05 11:12     ` Morten Brørup
2021-07-05 13:44       ` Bruce Richardson
2021-07-05 15:55     ` Jerin Jacob
2021-07-05 17:16       ` Bruce Richardson
2021-07-07  8:08         ` Jerin Jacob
2021-07-07  8:35           ` Bruce Richardson
2021-07-07 10:34             ` Jerin Jacob
2021-07-07 11:01               ` Bruce Richardson
2021-07-08  3:11                 ` fengchengwen
2021-07-08 18:35                   ` Jerin Jacob
2021-07-09  9:14                     ` Bruce Richardson
2021-07-11  7:14                       ` Jerin Jacob
2021-07-12  7:01                         ` Morten Brørup
2021-07-12  7:59                           ` Jerin Jacob
2021-07-06  8:20     ` fengchengwen
2021-07-06  9:27       ` Bruce Richardson
2021-07-06  3:01   ` fengchengwen
2021-07-06 10:01     ` Bruce Richardson
2021-07-04 14:57 ` Andrew Rybchenko
2021-07-06  3:56   ` fengchengwen
2021-07-06 10:02     ` Bruce Richardson
2021-07-04 15:21 ` Matan Azrad
2021-07-06  6:25   ` fengchengwen
2021-07-06  6:50     ` Matan Azrad
2021-07-06  9:08       ` fengchengwen
2021-07-06  9:17         ` Matan Azrad
2021-07-06 20:28 ` [dpdk-dev] [RFC UPDATE PATCH 0/9] dmadev rfc suggested updates Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 1/9] dmadev: add missing exports Bruce Richardson
2021-07-07  8:26     ` David Marchand
2021-07-07  8:36       ` Bruce Richardson
2021-07-07  8:57         ` David Marchand
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 2/9] dmadev: change virtual addresses to IOVA Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 3/9] dmadev: add dump function Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 4/9] dmadev: remove xstats functions Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 5/9] dmadev: drop cookie typedef Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 6/9] dmadev: allow NULL parameters to completed ops call Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 7/9] dmadev: stats structure updates Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 8/9] drivers: add dma driver category Bruce Richardson
2021-07-06 20:28   ` [dpdk-dev] [RFC UPDATE PATCH 9/9] app/test: add basic dmadev unit test Bruce Richardson
2021-07-07  3:16   ` [dpdk-dev] [RFC UPDATE PATCH 0/9] dmadev rfc suggested updates fengchengwen
2021-07-07  8:11     ` Bruce Richardson
2021-07-07  8:14     ` Bruce Richardson
2021-07-07 10:42     ` Jerin Jacob
2021-07-11  9:25 ` [dpdk-dev] [PATCH v2] dmadev: introduce DMA device library Chengwen Feng
2021-07-11  9:42   ` fengchengwen
2021-07-11 13:34     ` Jerin Jacob
2021-07-12  7:40       ` Morten Brørup
2021-07-11 14:25   ` Jerin Jacob
2021-07-12  7:15   ` Morten Brørup
2021-07-12  9:59   ` Jerin Jacob
2021-07-12 13:32     ` Bruce Richardson
2021-07-12 16:34       ` Jerin Jacob
2021-07-12 17:00         ` Bruce Richardson
2021-07-13  8:59           ` Jerin Jacob
2021-07-12 12:05   ` Bruce Richardson
2021-07-12 15:50   ` Bruce Richardson
2021-07-13  9:07     ` Jerin Jacob
2021-07-13 14:19   ` Ananyev, Konstantin
2021-07-13 14:28     ` Bruce Richardson
2021-07-13 12:27 ` [dpdk-dev] [PATCH v3] " Chengwen Feng
2021-07-13 13:06   ` fengchengwen
2021-07-13 13:37     ` Bruce Richardson
2021-07-15  6:44       ` Jerin Jacob
2021-07-15  8:25         ` Bruce Richardson
2021-07-15  9:49           ` Jerin Jacob
2021-07-15 10:00             ` Bruce Richardson
2021-07-13 16:02   ` Bruce Richardson
2021-07-14 12:22   ` Nipun Gupta
2021-07-15  8:29     ` fengchengwen
2021-07-15 11:16       ` Nipun Gupta
2021-07-15 12:11         ` Bruce Richardson
2021-07-15 12:31           ` Jerin Jacob
2021-07-15 12:34             ` Nipun Gupta
2021-07-14 16:05   ` Bruce Richardson
2021-07-15  7:10   ` Jerin Jacob
2021-07-15  9:03     ` Bruce Richardson
2021-07-15  9:30       ` Jerin Jacob
2021-07-15 10:03         ` Bruce Richardson
2021-07-15 10:05           ` Bruce Richardson
2021-07-15 15:41 ` [dpdk-dev] [PATCH v4] " Chengwen Feng
2021-07-15 16:04   ` fengchengwen
2021-07-15 16:33     ` Bruce Richardson
2021-07-16  3:04       ` fengchengwen
2021-07-16  9:50         ` Bruce Richardson
2021-07-16 12:34           ` Jerin Jacob
2021-07-16 12:40         ` Jerin Jacob
2021-07-16 12:48           ` Bruce Richardson
2021-07-16 12:54     ` Jerin Jacob
2021-07-16  2:45 ` [dpdk-dev] [PATCH v5] " Chengwen Feng
2021-07-16 13:20   ` Jerin Jacob
2021-07-16 14:41   ` Bruce Richardson
2021-07-19  3:29 ` [dpdk-dev] [PATCH v6] " Chengwen Feng
2021-07-19  6:21   ` Jerin Jacob
2021-07-19 13:20     ` fengchengwen
2021-07-19 13:36       ` Jerin Jacob
2021-07-19 13:05 ` [dpdk-dev] [PATCH v7] " Chengwen Feng
2021-07-20  1:14 ` [dpdk-dev] [PATCH v8] " Chengwen Feng
2021-07-20  5:03   ` Jerin Jacob
2021-07-20  6:53     ` fengchengwen
2021-07-20  9:43       ` Jerin Jacob
2021-07-20 10:13       ` Bruce Richardson
2021-07-20 11:12 ` [dpdk-dev] [PATCH v9] " Chengwen Feng
2021-07-20 12:05   ` Bruce Richardson
2021-07-20 12:46 ` [dpdk-dev] [PATCH v10] " Chengwen Feng
2021-07-26  6:53   ` fengchengwen
2021-07-26  8:31     ` Bruce Richardson
2021-07-27  3:57       ` fengchengwen
2021-07-26 11:03     ` Morten Brørup
2021-07-26 11:21       ` Jerin Jacob
2021-07-27  3:39 ` [dpdk-dev] [PATCH v11 0/2] support dmadev Chengwen Feng
2021-07-27  3:39   ` [dpdk-dev] [PATCH v11 1/2] dmadev: introduce DMA device library Chengwen Feng
2021-07-28 11:13     ` Bruce Richardson
2021-07-29  1:26       ` fengchengwen
2021-07-29  9:15         ` Bruce Richardson
2021-07-29 13:33           ` fengchengwen
2021-07-29 10:44         ` Jerin Jacob
2021-07-29 13:30           ` fengchengwen
2021-07-27  3:40   ` [dpdk-dev] [PATCH v11 2/2] doc: add dmadev library guide Chengwen Feng
2021-07-29 11:02     ` Jerin Jacob
2021-07-29 13:13       ` fengchengwen
2021-07-29 13:28         ` fengchengwen
2021-07-29 13:06 ` [dpdk-dev] [PATCH v12 0/6] support dmadev Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 5/6] doc: add DMA device library guide Chengwen Feng
2021-07-29 13:06   ` [dpdk-dev] [PATCH v12 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-03 11:29 ` [dpdk-dev] [PATCH v13 0/6] support dmadev Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-05 12:56     ` Walsh, Conor
2021-08-05 13:12       ` fengchengwen
2021-08-05 13:44         ` Conor Walsh
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 5/6] doc: add DMA device library guide Chengwen Feng
2021-08-03 14:55     ` Jerin Jacob
2021-08-05 13:15       ` fengchengwen
2021-08-03 11:29   ` [dpdk-dev] [PATCH v13 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-03 11:46   ` [dpdk-dev] [PATCH v13 0/6] support dmadev fengchengwen
2021-08-10 11:54 ` [dpdk-dev] [PATCH v14 " Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 5/6] doc: add DMA device library guide Chengwen Feng
2021-08-10 15:27     ` Walsh, Conor
2021-08-11  0:47       ` fengchengwen
2021-08-13  9:20       ` fengchengwen
2021-08-13 10:12         ` Walsh, Conor
2021-08-10 11:54   ` [dpdk-dev] [PATCH v14 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-13  9:09 ` [dpdk-dev] [PATCH v15 0/6] support dmadev Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 1/6] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-19 14:52     ` Bruce Richardson
2021-08-23  3:43       ` fengchengwen
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 2/6] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 3/6] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 4/6] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 5/6] doc: add DMA device library guide Chengwen Feng
2021-08-13  9:09   ` [dpdk-dev] [PATCH v15 6/6] maintainers: add for dmadev Chengwen Feng
2021-08-23  3:31 ` [dpdk-dev] [PATCH v16 0/9] support dmadev Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 1/9] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 2/9] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 3/9] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 4/9] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 5/9] doc: add DMA device library guide Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 6/9] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-08-26 18:39     ` Bruce Richardson
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 7/9] dma/skeleton: add test cases Chengwen Feng
2021-08-23 14:03     ` Bruce Richardson
2021-08-26  9:30       ` fengchengwen
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 8/9] test: enable dmadev skeleton test Chengwen Feng
2021-08-23  3:31   ` [dpdk-dev] [PATCH v16 9/9] maintainers: add for dmadev Chengwen Feng
2021-08-28  7:29 ` [dpdk-dev] [PATCH v17 0/8] support dmadev Chengwen Feng
2021-08-28  7:29   ` [dpdk-dev] [PATCH v17 1/8] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 2/8] dmadev: introduce DMA device library internal header Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 3/8] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 4/8] dmadev: introduce DMA device library implementation Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 5/8] doc: add DMA device library guide Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 6/8] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 7/8] app/test: add dmadev API test Chengwen Feng
2021-08-28  7:30   ` [dpdk-dev] [PATCH v17 8/8] maintainers: add for dmadev Chengwen Feng
2021-08-28  8:25     ` fengchengwen
2021-08-30  8:19       ` Bruce Richardson
2021-09-02 10:54 ` [dpdk-dev] [PATCH v18 0/8] support dmadev Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 1/8] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 2/8] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 3/8] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 4/8] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 5/8] doc: add DMA device library guide Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 6/8] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 7/8] app/test: add dmadev API test Chengwen Feng
2021-09-02 10:54   ` [dpdk-dev] [PATCH v18 8/8] maintainers: add for dmadev Chengwen Feng
2021-09-02 11:51     ` Bruce Richardson
2021-09-02 13:39       ` fengchengwen
2021-09-03 12:59         ` Maxime Coquelin
2021-09-04  7:02           ` fengchengwen
2021-09-06  1:46             ` Li, Xiaoyun
2021-09-06  8:00               ` fengchengwen
2021-09-06  2:03           ` Xia, Chenbo
2021-09-06  8:01             ` fengchengwen
2021-09-02 13:13 ` [dpdk-dev] [PATCH v19 0/7] support dmadev Chengwen Feng
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 1/7] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-03 11:42     ` Gagandeep Singh
2021-09-04  1:31       ` fengchengwen
2021-09-06  6:48         ` Gagandeep Singh
2021-09-06  7:52           ` fengchengwen
2021-09-06  8:06             ` Jerin Jacob
2021-09-06  8:08             ` Bruce Richardson
2021-09-07 12:55             ` fengchengwen
2021-09-03 13:03     ` Bruce Richardson
2021-09-04  3:05       ` fengchengwen
2021-09-04 10:10       ` Morten Brørup
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:35     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 2/7] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:35     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 3/7] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:35     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 4/7] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-03 15:30       ` Bruce Richardson
2021-09-03 15:35     ` Conor Walsh
2021-09-04  8:52       ` fengchengwen
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 5/7] doc: add DMA device library guide Chengwen Feng
2021-09-03 15:13     ` Kevin Laatz
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 6/7] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-03 15:14     ` Kevin Laatz
2021-09-04  7:17       ` fengchengwen
2021-09-03 15:36     ` Conor Walsh
2021-09-02 13:13   ` [dpdk-dev] [PATCH v19 7/7] app/test: add dmadev API test Chengwen Feng
2021-09-02 14:11     ` Walsh, Conor
2021-09-03  0:39       ` fengchengwen
2021-09-03 15:38         ` Walsh, Conor
2021-09-04  7:22           ` fengchengwen
2021-09-03 15:14     ` Kevin Laatz
2021-09-04 10:10 ` [dpdk-dev] [PATCH v20 0/7] support dmadev Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 1/7] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 2/7] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-06 13:35     ` Bruce Richardson
2021-09-07 13:05       ` fengchengwen
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 3/7] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 4/7] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 5/7] doc: add DMA device library guide Chengwen Feng
2021-09-04 10:17     ` Jerin Jacob
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 6/7] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-04 10:10   ` [dpdk-dev] [PATCH v20 7/7] app/test: add dmadev API test Chengwen Feng
2021-09-06 13:37   ` [dpdk-dev] [PATCH v20 0/7] support dmadev Bruce Richardson
2021-09-07 12:56 ` [dpdk-dev] [PATCH v21 " Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 1/7] dmadev: introduce DMA device library public APIs Chengwen Feng
2021-09-09 10:33     ` Thomas Monjalon
2021-09-09 11:18       ` Bruce Richardson
2021-09-09 11:29         ` Thomas Monjalon
2021-09-09 12:45           ` Bruce Richardson
2021-09-09 13:54             ` fengchengwen
2021-09-09 14:26               ` Thomas Monjalon
2021-09-09 14:31                 ` Bruce Richardson
2021-09-09 14:28               ` Bruce Richardson
2021-09-09 15:12                 ` Morten Brørup
2021-09-09 13:33       ` fengchengwen
2021-09-09 14:19         ` Thomas Monjalon
2021-09-16  3:57       ` fengchengwen
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 2/7] dmadev: introduce DMA device library internal header Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 3/7] dmadev: introduce DMA device library PMD header Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 4/7] dmadev: introduce DMA device library implementation Chengwen Feng
2021-09-08  9:54     ` Walsh, Conor
2021-09-09 13:25       ` fengchengwen
2021-09-15 13:51     ` Kevin Laatz
2021-09-15 14:34       ` Bruce Richardson
2021-09-15 14:47         ` Kevin Laatz
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 5/7] doc: add DMA device library guide Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 6/7] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-07 12:56   ` [dpdk-dev] [PATCH v21 7/7] app/test: add dmadev API test Chengwen Feng
2021-09-16  3:41 ` [dpdk-dev] [PATCH v22 0/5] support dmadev Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 1/5] dmadev: introduce DMA device library Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 2/5] dmadev: add control plane function support Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 3/5] dmadev: add data " Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 4/5] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-16  3:41   ` [dpdk-dev] [PATCH v22 5/5] app/test: add dmadev API test Chengwen Feng
2021-09-24 10:53 ` [dpdk-dev] [PATCH v23 0/6] support dmadev Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-04 21:12     ` Radha Mohan
2021-10-05  8:24       ` Kevin Laatz
2021-10-05 16:39         ` Radha Mohan
2021-10-08  1:52       ` fengchengwen
2021-10-06 10:26     ` Thomas Monjalon
2021-10-08  7:13       ` fengchengwen
2021-10-08 10:09         ` Thomas Monjalon
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 2/6] dmadev: add control plane function support Chengwen Feng
2021-10-05 10:16     ` Matan Azrad
2021-10-08  3:28       ` fengchengwen
2021-10-06 10:46     ` Thomas Monjalon
2021-10-08  7:55       ` fengchengwen
2021-10-08 10:18         ` Thomas Monjalon
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 3/6] dmadev: add data " Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 4/6] dmadev: add multi-process support Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-09-24 10:53   ` [dpdk-dev] [PATCH v23 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-09  9:33 ` [dpdk-dev] [PATCH v24 0/6] support dmadev Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 2/6] dmadev: add control plane API support Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 3/6] dmadev: add data " Chengwen Feng
2021-10-09 10:03     ` fengchengwen
2021-10-11 10:40     ` Bruce Richardson
2021-10-11 12:31       ` fengchengwen
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 4/6] dmadev: add multi-process support Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-10-09  9:33   ` [dpdk-dev] [PATCH v24 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-11  7:33 ` [dpdk-dev] [PATCH v25 0/6] support dmadev Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-12 19:09     ` Thomas Monjalon
2021-10-13  0:21       ` fengchengwen
2021-10-13  7:41         ` Thomas Monjalon
2021-10-15  8:29           ` Thomas Monjalon
2021-10-15  9:59             ` fengchengwen
2021-10-15 13:46               ` Thomas Monjalon
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 2/6] dmadev: add control plane API support Chengwen Feng
2021-10-11 15:44     ` Bruce Richardson
2021-10-12  3:57       ` fengchengwen
2021-10-12 18:57     ` Thomas Monjalon
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 3/6] dmadev: add data " Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 4/6] dmadev: add multi-process support Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-10-11  7:33   ` [dpdk-dev] [PATCH v25 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-13 12:24 ` [dpdk-dev] [PATCH v26 0/6] support dmadev Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 1/6] dmadev: introduce DMA device library Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 2/6] dmadev: add control plane API support Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 3/6] dmadev: add data " Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 4/6] dmadev: add multi-process support Chengwen Feng
2021-10-13 12:24   ` [dpdk-dev] [PATCH v26 5/6] dma/skeleton: introduce skeleton dmadev driver Chengwen Feng
2021-10-13 12:25   ` [dpdk-dev] [PATCH v26 6/6] app/test: add dmadev API test Chengwen Feng
2021-10-17 19:17   ` [dpdk-dev] [PATCH v26 0/6] support dmadev Thomas Monjalon

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.