All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nithin Dabilpuram <nithind1988@gmail.com>
To: "Li, Xiaoyun" <xiaoyun.li@intel.com>
Cc: "jerinj@marvell.com" <jerinj@marvell.com>,
	"dev@dpdk.org" <dev@dpdk.org>,
	"stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 1/2] app/testpmd: fix csumonly mode when run without outer chksum
Date: Tue, 17 Aug 2021 16:28:36 +0530	[thread overview]
Message-ID: <YRuWXIVjSMvPPtw8@gmail.com> (raw)
In-Reply-To: <DM4PR11MB5534A2163EC04B2EF7AACCFB99FE9@DM4PR11MB5534.namprd11.prod.outlook.com>

On Tue, Aug 17, 2021 at 01:43:27AM +0000, Li, Xiaoyun wrote:
> 
> 
> > -----Original Message-----
> > From: Nithin Dabilpuram <nithind1988@gmail.com>
> > Sent: Monday, August 16, 2021 18:56
> > To: Li, Xiaoyun <xiaoyun.li@intel.com>
> > Cc: jerinj@marvell.com; dev@dpdk.org; jia.guo@intel.com; stable@dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH 1/2] app/testpmd: fix csumonly mode when run
> > without outer chksum
> > 
> > On Mon, Aug 16, 2021 at 08:48:20AM +0000, Li, Xiaoyun wrote:
> > > Hi
> > >
> > > > -----Original Message-----
> > > > From: Nithin Dabilpuram <ndabilpuram@marvell.com>
> > > > Sent: Monday, August 16, 2021 15:10
> > > > To: Li, Xiaoyun <xiaoyun.li@intel.com>
> > > > Cc: jerinj@marvell.com; dev@dpdk.org; Nithin Dabilpuram
> > > > <ndabilpuram@marvell.com>; jia.guo@intel.com; stable@dpdk.org
> > > > Subject: [PATCH 1/2] app/testpmd: fix csumonly mode when run without
> > > > outer chksum
> > > >
> > > > Donot use outer metadata when neither outer ip checksum nor outer
> > > > udp checksum is enabled. PMD's will ignore the outer_l2_len and
> > > > outer_l3_len in cases where none of the outer checksum is enabled
> > > > and hence only l2_len and l3_len will be used to calculate the offsets for L2
> > or L3 header.
> > >
> > > I don't understand.
> > > In process_outer_chksum, only PKT_TX_OUTER_IPV6 Will be set if it's ipv6
> > packets.
> > > So PKT_TX_OUTER_IPV6 means this packet is tunnel ipv6 packet. So it actually
> > needs outer l2 len and outer l3 len put them to hw.
> > > At least i40e needs outer l2 len and outer l3 len as far as I know.
> > 
> > Ok, do you mean m->outer_l2_len and m->outer_l3_len will be referred in i40e
> > driver even when both DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM and
> > DEV_TX_OFFLOAD_OUTER_UDP_CKSUM are not enabled in ethdev Tx offloads ?
> > 
> > I thought as per spec, those fields will only be used when the Outer offloads are
> > enabled.
> 
> Checked again. You're right. Tx offloads are enough.

Ack, thanks.
> 
> > 
> > >
> > > >
> > > > Fixes: 3c32113a1aac ("app/testpmd: fix IPv6 tunnel checksum")
> > > > Cc: jia.guo@intel.com
> > > > Cc: stable@dpdk.org
> > > >
> > > > Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
> > > > ---
> > > >  app/test-pmd/csumonly.c | 3 +--
> > > >  1 file changed, 1 insertion(+), 2 deletions(-)
> > > >
> > > > diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c index
> > > > 607c889..38cc256 100644
> > > > --- a/app/test-pmd/csumonly.c
> > > > +++ b/app/test-pmd/csumonly.c
> > > > @@ -961,8 +961,7 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
> > > >  			    (tx_offloads &
> > > >  			     DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM) ||
> > > >  			    (tx_offloads &
> > > > -			     DEV_TX_OFFLOAD_OUTER_UDP_CKSUM) ||
> > > > -			    (tx_ol_flags & PKT_TX_OUTER_IPV6)) {
> > > > +			     DEV_TX_OFFLOAD_OUTER_UDP_CKSUM)) {
> > > >  				m->outer_l2_len = info.outer_l2_len;
> > > >  				m->outer_l3_len = info.outer_l3_len;
> > > >  				m->l2_len = info.l2_len;
> > > > --
> > > > 2.8.4
> > >

  reply	other threads:[~2021-08-17 10:59 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-16  7:09 [dpdk-dev] [PATCH 1/2] app/testpmd: fix csumonly mode when run without outer chksum Nithin Dabilpuram
2021-08-16  7:09 ` [dpdk-dev] [PATCH 2/2] app/testpmd: fix verbose mode dump for Tx Nithin Dabilpuram
2021-08-17  1:54   ` Li, Xiaoyun
2021-08-17  7:54     ` Raslan Darawsheh
2021-08-16  8:48 ` [dpdk-dev] [PATCH 1/2] app/testpmd: fix csumonly mode when run without outer chksum Li, Xiaoyun
2021-08-16 10:55   ` Nithin Dabilpuram
2021-08-17  1:43     ` Li, Xiaoyun
2021-08-17 10:58       ` Nithin Dabilpuram [this message]
2021-08-17  1:44 ` Li, Xiaoyun
2021-08-25 12:57   ` [dpdk-dev] [dpdk-stable] " Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YRuWXIVjSMvPPtw8@gmail.com \
    --to=nithind1988@gmail.com \
    --cc=dev@dpdk.org \
    --cc=jerinj@marvell.com \
    --cc=stable@dpdk.org \
    --cc=xiaoyun.li@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.