Hi Chris,

sorry for the long delay.

All looks good except for this:

> @@ -806,6 +954,7 @@ static int bcm_iproc_i2c_xfer_wait(struct bcm_iproc_i2c_dev *iproc_i2c,
>  		/* flush both TX/RX FIFOs */
>  		val = BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT);
>  		iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val);
> +		iproc_i2c_lockup_recover(iproc_i2c);
>  		return -ETIMEDOUT;
>  	}
>  
> @@ -814,6 +963,7 @@ static int bcm_iproc_i2c_xfer_wait(struct bcm_iproc_i2c_dev *iproc_i2c,
>  		/* flush both TX/RX FIFOs */
>  		val = BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT);
>  		iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val);
> +		iproc_i2c_lockup_recover(iproc_i2c);
>  		return ret;
>  	}

I2C specs suggest recovery at the beginning of a transfer when SDA is
detected low. Not at the end of a transfer.

Happy hacking,

   Wolfram