On Wed, Dec 15, 2021 at 05:52:24PM +0300, Dmitry Osipenko wrote:
> 15.12.2021 17:01, Thierry Reding пишет:
> > On Sun, Dec 12, 2021 at 12:13:55AM +0300, Dmitry Osipenko wrote:
> > [...]
> >> +		i2c@1 {
> >> +			reg = <1>;
> >> +			#address-cells = <1>;
> >> +			#size-cells = <0>;
> >> +
> >> +			dsi-bridge@7 {
> >> +				compatible = "toshiba,tc358768";
> >> +				reg = <0x7>;
> >> +
> >> +				#address-cells = <1>;
> >> +				#size-cells = <0>;
> >> +
> >> +				clocks = <&tc358768_osc>;
> >> +				clock-names = "refclk";
> >> +
> >> +				reset-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>;
> >> +
> >> +				vddc-supply = <&vdd_1v2_mipi>;
> >> +				vddio-supply = <&vdd_1v8_vio>;
> >> +				vddmipi-supply = <&vdd_1v2_mipi>;
> >> +
> >> +				ports {
> >> +					#address-cells = <1>;
> >> +					#size-cells = <0>;
> >> +
> >> +					port@0 {
> >> +						reg = <0>;
> >> +
> >> +						bridge_input: endpoint {
> >> +							remote-endpoint = <&dpi_output>;
> >> +							data-lines = <24>;
> >> +						};
> >> +					};
> >> +
> >> +					port@1 {
> >> +						reg = <1>;
> >> +
> >> +						bridge_output: endpoint {
> >> +							remote-endpoint = <&panel_input>;
> >> +						};
> >> +					};
> >> +				};
> >> +
> >> +				/*
> >> +				 * Panasonic VVX10F004B00 or HYDIS HV101WU1-1E1
> >> +				 * LCD SuperIPS+ Full HD panel.
> >> +				 */
> >> +				panel@1 {
> >> +					compatible = "panasonic,vvx10f004b00";
> >> +					reg = <1>;
> >> +
> >> +					power-supply = <&vdd_pnl>;
> >> +					backlight = <&backlight>;
> >> +
> >> +					port {
> >> +						panel_input: endpoint {
> >> +							remote-endpoint = <&bridge_output>;
> >> +						};
> >> +					};
> >> +				};
> > 
> > make dtbs_check complains about this and says that panel@1 (as well as
> > #address-cells and #size-cells) are not allowed here. And indeed the
> > binding for the Toshiba bridge doesn't mention them here.
> > 
> > Do we need this here or should this be moved to the top level to fix
> > those warnings? I guess what you're doing above is describe a DSI bus
> > created by the DSI bridge, which also makes sense, so another
> > alternative would be to fix up the binding and let it accept those
> > properties.
> 
> Toshiba bridge binding is incomplete. David has patch for that [1], I
> don't think that it was sent out yet.
> 
> [1]
> https://github.com/okias/linux/commit/0875230062294b6db17f395ced0a8384a4c1cfc7

Okay, please make sure this finds its way upstream eventually. That
patch looks quite similar to what I tried to do to fix this up locally.

Thierry