From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D60BBC433EF for ; Wed, 29 Dec 2021 23:30:23 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233286AbhL2XaW (ORCPT ); Wed, 29 Dec 2021 18:30:22 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40252 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233131AbhL2XaU (ORCPT ); Wed, 29 Dec 2021 18:30:20 -0500 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [IPv6:2001:4b98:dc2:55:216:3eff:fef7:d647]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9A3F7C061574; Wed, 29 Dec 2021 15:30:20 -0800 (PST) Received: from pendragon.ideasonboard.com (62-78-145-57.bb.dnainternet.fi [62.78.145.57]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 278682A5; Thu, 30 Dec 2021 00:30:18 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1640820618; bh=7slk1BTJSQ2MNvLZf4HMKHSD+agLM/Pr6AQQ0aueOvo=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=QtaIB/7dNo9A+AMXc/YOGtE8UoCeVrBc0Jl/LIgtRLJ/LTwksGeJXbiqXq0HsP+xR kggcnIx6a7EgI7uC/bPA/nWWBMzNI+PnEygjPGo6YIv5CKCBMnwf3b5NRaFkVH/W1u rf1rt+Qgjd8C+472L5tYs0RPIlKS/sGXB6AGPjbE= Date: Thu, 30 Dec 2021 01:30:16 +0200 From: Laurent Pinchart To: Pratyush Yadav Cc: Vinod Koul , Paul Kocialkowski , Tomi Valkeinen , Vignesh Raghavendra , Kishon Vijay Abraham I , Rob Herring , Swapnil Jakhade , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org Subject: Re: [PATCH v7 1/4] phy: cadence: Add Cadence D-PHY Rx driver Message-ID: References: <20211227105545.4852-1-p.yadav@ti.com> <20211227105545.4852-2-p.yadav@ti.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: <20211227105545.4852-2-p.yadav@ti.com> Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Pratyush, Thank you for the patch. On Mon, Dec 27, 2021 at 04:25:42PM +0530, Pratyush Yadav wrote: > The Cadence D-PHY can be configured in Tx (DSI) mode or Rx (CSI) mode. > Both modes have a different programming sequence and share little among > them. In addition, a PHY configured in Tx mode cannot be used in Rx mode > and vice versa. For this reason, create a separate driver for the Rx > mode to make it easier to read and maintain. > > Signed-off-by: Pratyush Yadav > > --- > > Changes in v7: > - Add spaces after { and before } in the bands table. > - Drop the wrapping around the for loop on cdns_dphy_rx_get_band_ctrl(). > - Make cdns_dphy_rx_wait_for_bit() inline. > - Print an error message if registering PHY provider fails. > > Changes in v6: > - Move to a separate driver. > > Changes in v5: > - Use the new cdns_dphy_info to specify PHY ops. > - Re-order include in alphabetical order. > - Make bands const. > - Drop num_bands. > - Make i, lanes unsigned. > - Drop the maximum check in cdns_dphy_rx_get_band_ctrl(). Let the loop > complete and return -EOPNOTSUPP when we reach the end. > - Drop the "rate < bands[i].min_rate" check since the bands are in > ascending order. > - Move data_lane_ctrl to start of function and make it static const. > > Changes in v4: > - Drop the submode parts. Use a different compatible for the Rx ops. > - Make bands and num_bands static. > > Changes in v3: > - Use a table to select the band. > - Use a table to poll the data lane ready bits. > - Multiply the DPHY HS clock rate by 2 to get the bit rate since the > clock is DDR. > > drivers/phy/cadence/Kconfig | 8 + > drivers/phy/cadence/Makefile | 1 + > drivers/phy/cadence/cdns-dphy-rx.c | 255 +++++++++++++++++++++++++++++ > 3 files changed, 264 insertions(+) > create mode 100644 drivers/phy/cadence/cdns-dphy-rx.c > > diff --git a/drivers/phy/cadence/Kconfig b/drivers/phy/cadence/Kconfig > index a62910ff5591..1adde2d99ae7 100644 > --- a/drivers/phy/cadence/Kconfig > +++ b/drivers/phy/cadence/Kconfig > @@ -22,6 +22,14 @@ config PHY_CADENCE_DPHY > system. If M is selected, the module will be called > cdns-dphy. > > +config PHY_CADENCE_DPHY_RX > + tristate "Cadence D-PHY Rx Support" > + depends on HAS_IOMEM && OF > + select GENERIC_PHY > + select GENERIC_PHY_MIPI_DPHY > + help > + Support for Cadence D-PHY in Rx configuration. > + > config PHY_CADENCE_SIERRA > tristate "Cadence Sierra PHY Driver" > depends on OF && HAS_IOMEM && RESET_CONTROLLER > diff --git a/drivers/phy/cadence/Makefile b/drivers/phy/cadence/Makefile > index 26e16bd34efe..e17f035ddece 100644 > --- a/drivers/phy/cadence/Makefile > +++ b/drivers/phy/cadence/Makefile > @@ -1,5 +1,6 @@ > # SPDX-License-Identifier: GPL-2.0-only > obj-$(CONFIG_PHY_CADENCE_TORRENT) += phy-cadence-torrent.o > obj-$(CONFIG_PHY_CADENCE_DPHY) += cdns-dphy.o > +obj-$(CONFIG_PHY_CADENCE_DPHY_RX) += cdns-dphy-rx.o > obj-$(CONFIG_PHY_CADENCE_SIERRA) += phy-cadence-sierra.o > obj-$(CONFIG_PHY_CADENCE_SALVO) += phy-cadence-salvo.o > diff --git a/drivers/phy/cadence/cdns-dphy-rx.c b/drivers/phy/cadence/cdns-dphy-rx.c > new file mode 100644 > index 000000000000..47a5b67ded58 > --- /dev/null > +++ b/drivers/phy/cadence/cdns-dphy-rx.c > @@ -0,0 +1,255 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#define DPHY_PMA_CMN(reg) (reg) > +#define DPHY_PCS(reg) (0xb00 + (reg)) > +#define DPHY_ISO(reg) (0xc00 + (reg)) > + > +#define DPHY_CMN_SSM DPHY_PMA_CMN(0x20) > +#define DPHY_CMN_RX_MODE_EN BIT(10) > +#define DPHY_CMN_RX_BANDGAP_TIMER_MASK GENMASK(8, 1) > +#define DPHY_CMN_SSM_EN BIT(0) > + > +#define DPHY_CMN_RX_BANDGAP_TIMER 0x14 > + > +#define DPHY_BAND_CFG DPHY_PCS(0x0) > +#define DPHY_BAND_CFG_RIGHT_BAND GENMASK(9, 5) > +#define DPHY_BAND_CFG_LEFT_BAND GENMASK(4, 0) > + > +#define DPHY_POWER_ISLAND_EN_DATA DPHY_PCS(0x8) > +#define DPHY_POWER_ISLAND_EN_DATA_VAL 0xaaaaaaaa > + > +#define DPHY_POWER_ISLAND_EN_CLK DPHY_PCS(0xc) > +#define DPHY_POWER_ISLAND_EN_CLK_VAL 0xaa > + > +#define DPHY_ISO_CL_CTRL_L DPHY_ISO(0x10) > +#define DPHY_ISO_DL_CTRL_L0 DPHY_ISO(0x14) > +#define DPHY_ISO_DL_CTRL_L1 DPHY_ISO(0x20) > +#define DPHY_ISO_DL_CTRL_L2 DPHY_ISO(0x30) > +#define DPHY_ISO_DL_CTRL_L3 DPHY_ISO(0x3c) > + > +#define DPHY_ISO_LANE_READY_BIT 0 > +#define DPHY_ISO_LANE_READY_TIMEOUT_MS 100UL > + > +#define DPHY_LANES_MIN 1 > +#define DPHY_LANES_MAX 4 > + > +struct cdns_dphy_rx { > + void __iomem *regs; > + struct device *dev; > + struct phy *phy; > +}; > + > +struct cdns_dphy_rx_band { > + /* Rates are in Mbps. */ > + unsigned int min_rate; > + unsigned int max_rate; > +}; > + > +/* Order of bands is important since the index is the band number. */ > +static const struct cdns_dphy_rx_band bands[] = { > + { 80, 100 }, { 100, 120 }, { 120, 160 }, { 160, 200 }, { 200, 240 }, > + { 240, 280 }, { 280, 320 }, { 320, 360 }, { 360, 400 }, { 400, 480 }, > + { 480, 560 }, { 560, 640 }, { 640, 720 }, { 720, 800 }, { 800, 880 }, > + { 880, 1040 }, { 1040, 1200 }, { 1200, 1350 }, { 1350, 1500 }, > + { 1500, 1750 }, { 1750, 2000 }, { 2000, 2250 }, { 2250, 2500 } It could be possible to store only the min or max rate, as bands[i].max_rate == bands[i+1].min_rate. Up to you. > +}; > + > +static int cdns_dphy_rx_power_on(struct phy *phy) > +{ > + struct cdns_dphy_rx *dphy = phy_get_drvdata(phy); > + > + /* Start RX state machine. */ > + writel(DPHY_CMN_SSM_EN | DPHY_CMN_RX_MODE_EN | > + FIELD_PREP(DPHY_CMN_RX_BANDGAP_TIMER_MASK, > + DPHY_CMN_RX_BANDGAP_TIMER), > + dphy->regs + DPHY_CMN_SSM); > + > + return 0; > +} > + > +static int cdns_dphy_rx_power_off(struct phy *phy) > +{ > + struct cdns_dphy_rx *dphy = phy_get_drvdata(phy); > + > + writel(0, dphy->regs + DPHY_CMN_SSM); > + > + return 0; > +} > + > +static int cdns_dphy_rx_get_band_ctrl(unsigned long hs_clk_rate) > +{ > + unsigned int rate, i; > + > + rate = hs_clk_rate / 1000000UL; > + /* Since CSI-2 clock is DDR, the bit rate is twice the clock rate. */ > + rate *= 2; > + > + if (rate < bands[0].min_rate) > + return -EOPNOTSUPP; > + > + for (i = 0; i < ARRAY_SIZE(bands); i++) > + if (rate < bands[i].max_rate) > + return i; > + > + return -EOPNOTSUPP; > +} > + > +static inline int cdns_dphy_rx_wait_for_bit(void __iomem *addr, > + unsigned int bit) > +{ > + u32 val; > + > + return readl_relaxed_poll_timeout(addr, val, val & BIT(bit), 10, > + DPHY_ISO_LANE_READY_TIMEOUT_MS * 1000); > +} > + > +static int cdns_dphy_rx_wait_lane_ready(struct cdns_dphy_rx *dphy, > + unsigned int lanes) > +{ > + static const u32 data_lane_ctrl[] = {DPHY_ISO_DL_CTRL_L0, > + DPHY_ISO_DL_CTRL_L1, > + DPHY_ISO_DL_CTRL_L2, > + DPHY_ISO_DL_CTRL_L3}; > + void __iomem *reg = dphy->regs; > + unsigned int i; > + int ret; > + > + /* Data lanes. Minimum one lane is mandatory. */ > + if (lanes < DPHY_LANES_MIN || lanes > DPHY_LANES_MAX) > + return -EINVAL; How about moving this at the beginning of cdns_dphy_rx_configure(), to avoid starting the configuration sequence if the parameter is wrong ? > + > + /* Clock lane */ > + ret = cdns_dphy_rx_wait_for_bit(reg + DPHY_ISO_CL_CTRL_L, > + DPHY_ISO_LANE_READY_BIT); > + if (ret) > + return ret; > + > + for (i = 0; i < lanes; i++) { > + ret = cdns_dphy_rx_wait_for_bit(reg + data_lane_ctrl[i], > + DPHY_ISO_LANE_READY_BIT); > + if (ret) > + return ret; > + } > + > + return 0; > +} > + > +static int cdns_dphy_rx_configure(struct phy *phy, > + union phy_configure_opts *opts) > +{ > + struct cdns_dphy_rx *dphy = phy_get_drvdata(phy); > + unsigned int reg; > + int band_ctrl, ret; > + > + band_ctrl = cdns_dphy_rx_get_band_ctrl(opts->mipi_dphy.hs_clk_rate); > + if (band_ctrl < 0) > + return band_ctrl; > + > + reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, band_ctrl) | > + FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, band_ctrl); > + writel(reg, dphy->regs + DPHY_BAND_CFG); > + > + /* > + * Set the required power island phase 2 time. This is mandated by DPHY > + * specs. > + */ > + reg = DPHY_POWER_ISLAND_EN_DATA_VAL; > + writel(reg, dphy->regs + DPHY_POWER_ISLAND_EN_DATA); > + reg = DPHY_POWER_ISLAND_EN_CLK_VAL; > + writel(reg, dphy->regs + DPHY_POWER_ISLAND_EN_CLK); > + > + ret = cdns_dphy_rx_wait_lane_ready(dphy, opts->mipi_dphy.lanes); > + if (ret) { > + dev_err(dphy->dev, "DPHY wait for lane ready timeout\n"); > + return ret; > + } > + > + return 0; > +} > + > +static int cdns_dphy_rx_validate(struct phy *phy, enum phy_mode mode, > + int submode, union phy_configure_opts *opts) > +{ > + int ret; > + > + if (mode != PHY_MODE_MIPI_DPHY) > + return -EINVAL; > + > + ret = cdns_dphy_rx_get_band_ctrl(opts->mipi_dphy.hs_clk_rate); > + if (ret < 0) > + return ret; > + > + return phy_mipi_dphy_config_validate(&opts->mipi_dphy); > +} > + > +static const struct phy_ops cdns_dphy_rx_ops = { > + .power_on = cdns_dphy_rx_power_on, > + .power_off = cdns_dphy_rx_power_off, > + .configure = cdns_dphy_rx_configure, > + .validate = cdns_dphy_rx_validate, > +}; > + > +static int cdns_dphy_rx_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct phy_provider *provider; > + struct cdns_dphy_rx *dphy; > + > + dphy = devm_kzalloc(dev, sizeof(*dphy), GFP_KERNEL); > + if (!dphy) > + return -ENOMEM; > + > + dev_set_drvdata(dev, dphy); > + dphy->dev = dev; > + > + dphy->regs = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(dphy->regs)) > + return PTR_ERR(dphy->regs); > + > + dphy->phy = devm_phy_create(dev, NULL, &cdns_dphy_rx_ops); > + if (IS_ERR(dphy->phy)) { > + dev_err(dev, "Failed to create PHY: %d\n", PTR_ERR(dphy->phy)); > + return PTR_ERR(dphy->phy); > + } > + > + phy_set_drvdata(dphy->phy, dphy); > + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); > + if (IS_ERR(provider)) { > + dev_err(dev, "Failed to register PHY provider: %d\n", > + PTR_ERR(provider)); > + return PTR_ERR(provider); > + } > + > + return 0; > +} > + > +static const struct of_device_id cdns_dphy_rx_of_match[] = { > + { .compatible = "cdns,dphy-rx" }, > + { /* sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(of, cdns_dphy_rx_of_match); > + > +static struct platform_driver cdns_dphy_rx_platform_driver = { > + .probe = cdns_dphy_rx_probe, > + .driver = { > + .name = "cdns-mipi-dphy-rx", > + .of_match_table = cdns_dphy_rx_of_match, > + }, > +}; > +module_platform_driver(cdns_dphy_rx_platform_driver); > + > +MODULE_AUTHOR("Pratyush Yadav "); > +MODULE_DESCRIPTION("Cadence D-PHY Rx Driver"); > +MODULE_LICENSE("GPL v2"); This should be "GPL". "GPL v2" exists for historical reasons (see Documentation/process/license-rules.rst). Reviewed-by: Laurent Pinchart -- Regards, Laurent Pinchart From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 2377FC433FE for ; Wed, 29 Dec 2021 23:30:23 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:In-Reply-To:MIME-Version:References: Message-ID:Subject:Cc:To:From:Date:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=aGn3UAftXfagxkqyxyU99Iw7eOa2Y8+EOnKXJAnHtJ4=; b=Lv642y7ZZ91qxD vYg7akqTtPyUO96gelKJuhnSw64A3poWE6e/8kd7dnMHsd167KO13QSrl7PDGnPCcAN03RDhs2bNK dRD4ywTLTrGpV/AtYh0tGyBVHh5zhYPH3+0q9NA+bhKSQuxKsmTOvyNvsaUwwrtCdNRZ/9RhGhGhd YKxwyC3RdU26AvLGbXbmkJIpvRgILQximS25bsFkcBfTRESZGgVjXwQQpK+ZUUa7Tsa2OLv9TOU0d g4RVNl+33/VzK/M1t2RRQCPCDd1cN4J8URkLsr4od9HgK73Vs3WM1y2gM+SaPmnILCmso4VTCFt1A Ab+vtaqNBa60CF/0QYgg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1n2iOl-003UkX-BU; Wed, 29 Dec 2021 23:30:23 +0000 Received: from perceval.ideasonboard.com ([213.167.242.64]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1n2iOh-003Uk5-Qz for linux-phy@lists.infradead.org; Wed, 29 Dec 2021 23:30:22 +0000 Received: from pendragon.ideasonboard.com (62-78-145-57.bb.dnainternet.fi [62.78.145.57]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 278682A5; Thu, 30 Dec 2021 00:30:18 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1640820618; bh=7slk1BTJSQ2MNvLZf4HMKHSD+agLM/Pr6AQQ0aueOvo=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=QtaIB/7dNo9A+AMXc/YOGtE8UoCeVrBc0Jl/LIgtRLJ/LTwksGeJXbiqXq0HsP+xR kggcnIx6a7EgI7uC/bPA/nWWBMzNI+PnEygjPGo6YIv5CKCBMnwf3b5NRaFkVH/W1u rf1rt+Qgjd8C+472L5tYs0RPIlKS/sGXB6AGPjbE= Date: Thu, 30 Dec 2021 01:30:16 +0200 From: Laurent Pinchart To: Pratyush Yadav Cc: Vinod Koul , Paul Kocialkowski , Tomi Valkeinen , Vignesh Raghavendra , Kishon Vijay Abraham I , Rob Herring , Swapnil Jakhade , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org Subject: Re: [PATCH v7 1/4] phy: cadence: Add Cadence D-PHY Rx driver Message-ID: References: <20211227105545.4852-1-p.yadav@ti.com> <20211227105545.4852-2-p.yadav@ti.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20211227105545.4852-2-p.yadav@ti.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20211229_153020_063672_D3130A43 X-CRM114-Status: GOOD ( 44.89 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org Hi Pratyush, Thank you for the patch. On Mon, Dec 27, 2021 at 04:25:42PM +0530, Pratyush Yadav wrote: > The Cadence D-PHY can be configured in Tx (DSI) mode or Rx (CSI) mode. > Both modes have a different programming sequence and share little among > them. In addition, a PHY configured in Tx mode cannot be used in Rx mode > and vice versa. For this reason, create a separate driver for the Rx > mode to make it easier to read and maintain. > > Signed-off-by: Pratyush Yadav > > --- > > Changes in v7: > - Add spaces after { and before } in the bands table. > - Drop the wrapping around the for loop on cdns_dphy_rx_get_band_ctrl(). > - Make cdns_dphy_rx_wait_for_bit() inline. > - Print an error message if registering PHY provider fails. > > Changes in v6: > - Move to a separate driver. > > Changes in v5: > - Use the new cdns_dphy_info to specify PHY ops. > - Re-order include in alphabetical order. > - Make bands const. > - Drop num_bands. > - Make i, lanes unsigned. > - Drop the maximum check in cdns_dphy_rx_get_band_ctrl(). Let the loop > complete and return -EOPNOTSUPP when we reach the end. > - Drop the "rate < bands[i].min_rate" check since the bands are in > ascending order. > - Move data_lane_ctrl to start of function and make it static const. > > Changes in v4: > - Drop the submode parts. Use a different compatible for the Rx ops. > - Make bands and num_bands static. > > Changes in v3: > - Use a table to select the band. > - Use a table to poll the data lane ready bits. > - Multiply the DPHY HS clock rate by 2 to get the bit rate since the > clock is DDR. > > drivers/phy/cadence/Kconfig | 8 + > drivers/phy/cadence/Makefile | 1 + > drivers/phy/cadence/cdns-dphy-rx.c | 255 +++++++++++++++++++++++++++++ > 3 files changed, 264 insertions(+) > create mode 100644 drivers/phy/cadence/cdns-dphy-rx.c > > diff --git a/drivers/phy/cadence/Kconfig b/drivers/phy/cadence/Kconfig > index a62910ff5591..1adde2d99ae7 100644 > --- a/drivers/phy/cadence/Kconfig > +++ b/drivers/phy/cadence/Kconfig > @@ -22,6 +22,14 @@ config PHY_CADENCE_DPHY > system. If M is selected, the module will be called > cdns-dphy. > > +config PHY_CADENCE_DPHY_RX > + tristate "Cadence D-PHY Rx Support" > + depends on HAS_IOMEM && OF > + select GENERIC_PHY > + select GENERIC_PHY_MIPI_DPHY > + help > + Support for Cadence D-PHY in Rx configuration. > + > config PHY_CADENCE_SIERRA > tristate "Cadence Sierra PHY Driver" > depends on OF && HAS_IOMEM && RESET_CONTROLLER > diff --git a/drivers/phy/cadence/Makefile b/drivers/phy/cadence/Makefile > index 26e16bd34efe..e17f035ddece 100644 > --- a/drivers/phy/cadence/Makefile > +++ b/drivers/phy/cadence/Makefile > @@ -1,5 +1,6 @@ > # SPDX-License-Identifier: GPL-2.0-only > obj-$(CONFIG_PHY_CADENCE_TORRENT) += phy-cadence-torrent.o > obj-$(CONFIG_PHY_CADENCE_DPHY) += cdns-dphy.o > +obj-$(CONFIG_PHY_CADENCE_DPHY_RX) += cdns-dphy-rx.o > obj-$(CONFIG_PHY_CADENCE_SIERRA) += phy-cadence-sierra.o > obj-$(CONFIG_PHY_CADENCE_SALVO) += phy-cadence-salvo.o > diff --git a/drivers/phy/cadence/cdns-dphy-rx.c b/drivers/phy/cadence/cdns-dphy-rx.c > new file mode 100644 > index 000000000000..47a5b67ded58 > --- /dev/null > +++ b/drivers/phy/cadence/cdns-dphy-rx.c > @@ -0,0 +1,255 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#define DPHY_PMA_CMN(reg) (reg) > +#define DPHY_PCS(reg) (0xb00 + (reg)) > +#define DPHY_ISO(reg) (0xc00 + (reg)) > + > +#define DPHY_CMN_SSM DPHY_PMA_CMN(0x20) > +#define DPHY_CMN_RX_MODE_EN BIT(10) > +#define DPHY_CMN_RX_BANDGAP_TIMER_MASK GENMASK(8, 1) > +#define DPHY_CMN_SSM_EN BIT(0) > + > +#define DPHY_CMN_RX_BANDGAP_TIMER 0x14 > + > +#define DPHY_BAND_CFG DPHY_PCS(0x0) > +#define DPHY_BAND_CFG_RIGHT_BAND GENMASK(9, 5) > +#define DPHY_BAND_CFG_LEFT_BAND GENMASK(4, 0) > + > +#define DPHY_POWER_ISLAND_EN_DATA DPHY_PCS(0x8) > +#define DPHY_POWER_ISLAND_EN_DATA_VAL 0xaaaaaaaa > + > +#define DPHY_POWER_ISLAND_EN_CLK DPHY_PCS(0xc) > +#define DPHY_POWER_ISLAND_EN_CLK_VAL 0xaa > + > +#define DPHY_ISO_CL_CTRL_L DPHY_ISO(0x10) > +#define DPHY_ISO_DL_CTRL_L0 DPHY_ISO(0x14) > +#define DPHY_ISO_DL_CTRL_L1 DPHY_ISO(0x20) > +#define DPHY_ISO_DL_CTRL_L2 DPHY_ISO(0x30) > +#define DPHY_ISO_DL_CTRL_L3 DPHY_ISO(0x3c) > + > +#define DPHY_ISO_LANE_READY_BIT 0 > +#define DPHY_ISO_LANE_READY_TIMEOUT_MS 100UL > + > +#define DPHY_LANES_MIN 1 > +#define DPHY_LANES_MAX 4 > + > +struct cdns_dphy_rx { > + void __iomem *regs; > + struct device *dev; > + struct phy *phy; > +}; > + > +struct cdns_dphy_rx_band { > + /* Rates are in Mbps. */ > + unsigned int min_rate; > + unsigned int max_rate; > +}; > + > +/* Order of bands is important since the index is the band number. */ > +static const struct cdns_dphy_rx_band bands[] = { > + { 80, 100 }, { 100, 120 }, { 120, 160 }, { 160, 200 }, { 200, 240 }, > + { 240, 280 }, { 280, 320 }, { 320, 360 }, { 360, 400 }, { 400, 480 }, > + { 480, 560 }, { 560, 640 }, { 640, 720 }, { 720, 800 }, { 800, 880 }, > + { 880, 1040 }, { 1040, 1200 }, { 1200, 1350 }, { 1350, 1500 }, > + { 1500, 1750 }, { 1750, 2000 }, { 2000, 2250 }, { 2250, 2500 } It could be possible to store only the min or max rate, as bands[i].max_rate == bands[i+1].min_rate. Up to you. > +}; > + > +static int cdns_dphy_rx_power_on(struct phy *phy) > +{ > + struct cdns_dphy_rx *dphy = phy_get_drvdata(phy); > + > + /* Start RX state machine. */ > + writel(DPHY_CMN_SSM_EN | DPHY_CMN_RX_MODE_EN | > + FIELD_PREP(DPHY_CMN_RX_BANDGAP_TIMER_MASK, > + DPHY_CMN_RX_BANDGAP_TIMER), > + dphy->regs + DPHY_CMN_SSM); > + > + return 0; > +} > + > +static int cdns_dphy_rx_power_off(struct phy *phy) > +{ > + struct cdns_dphy_rx *dphy = phy_get_drvdata(phy); > + > + writel(0, dphy->regs + DPHY_CMN_SSM); > + > + return 0; > +} > + > +static int cdns_dphy_rx_get_band_ctrl(unsigned long hs_clk_rate) > +{ > + unsigned int rate, i; > + > + rate = hs_clk_rate / 1000000UL; > + /* Since CSI-2 clock is DDR, the bit rate is twice the clock rate. */ > + rate *= 2; > + > + if (rate < bands[0].min_rate) > + return -EOPNOTSUPP; > + > + for (i = 0; i < ARRAY_SIZE(bands); i++) > + if (rate < bands[i].max_rate) > + return i; > + > + return -EOPNOTSUPP; > +} > + > +static inline int cdns_dphy_rx_wait_for_bit(void __iomem *addr, > + unsigned int bit) > +{ > + u32 val; > + > + return readl_relaxed_poll_timeout(addr, val, val & BIT(bit), 10, > + DPHY_ISO_LANE_READY_TIMEOUT_MS * 1000); > +} > + > +static int cdns_dphy_rx_wait_lane_ready(struct cdns_dphy_rx *dphy, > + unsigned int lanes) > +{ > + static const u32 data_lane_ctrl[] = {DPHY_ISO_DL_CTRL_L0, > + DPHY_ISO_DL_CTRL_L1, > + DPHY_ISO_DL_CTRL_L2, > + DPHY_ISO_DL_CTRL_L3}; > + void __iomem *reg = dphy->regs; > + unsigned int i; > + int ret; > + > + /* Data lanes. Minimum one lane is mandatory. */ > + if (lanes < DPHY_LANES_MIN || lanes > DPHY_LANES_MAX) > + return -EINVAL; How about moving this at the beginning of cdns_dphy_rx_configure(), to avoid starting the configuration sequence if the parameter is wrong ? > + > + /* Clock lane */ > + ret = cdns_dphy_rx_wait_for_bit(reg + DPHY_ISO_CL_CTRL_L, > + DPHY_ISO_LANE_READY_BIT); > + if (ret) > + return ret; > + > + for (i = 0; i < lanes; i++) { > + ret = cdns_dphy_rx_wait_for_bit(reg + data_lane_ctrl[i], > + DPHY_ISO_LANE_READY_BIT); > + if (ret) > + return ret; > + } > + > + return 0; > +} > + > +static int cdns_dphy_rx_configure(struct phy *phy, > + union phy_configure_opts *opts) > +{ > + struct cdns_dphy_rx *dphy = phy_get_drvdata(phy); > + unsigned int reg; > + int band_ctrl, ret; > + > + band_ctrl = cdns_dphy_rx_get_band_ctrl(opts->mipi_dphy.hs_clk_rate); > + if (band_ctrl < 0) > + return band_ctrl; > + > + reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, band_ctrl) | > + FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, band_ctrl); > + writel(reg, dphy->regs + DPHY_BAND_CFG); > + > + /* > + * Set the required power island phase 2 time. This is mandated by DPHY > + * specs. > + */ > + reg = DPHY_POWER_ISLAND_EN_DATA_VAL; > + writel(reg, dphy->regs + DPHY_POWER_ISLAND_EN_DATA); > + reg = DPHY_POWER_ISLAND_EN_CLK_VAL; > + writel(reg, dphy->regs + DPHY_POWER_ISLAND_EN_CLK); > + > + ret = cdns_dphy_rx_wait_lane_ready(dphy, opts->mipi_dphy.lanes); > + if (ret) { > + dev_err(dphy->dev, "DPHY wait for lane ready timeout\n"); > + return ret; > + } > + > + return 0; > +} > + > +static int cdns_dphy_rx_validate(struct phy *phy, enum phy_mode mode, > + int submode, union phy_configure_opts *opts) > +{ > + int ret; > + > + if (mode != PHY_MODE_MIPI_DPHY) > + return -EINVAL; > + > + ret = cdns_dphy_rx_get_band_ctrl(opts->mipi_dphy.hs_clk_rate); > + if (ret < 0) > + return ret; > + > + return phy_mipi_dphy_config_validate(&opts->mipi_dphy); > +} > + > +static const struct phy_ops cdns_dphy_rx_ops = { > + .power_on = cdns_dphy_rx_power_on, > + .power_off = cdns_dphy_rx_power_off, > + .configure = cdns_dphy_rx_configure, > + .validate = cdns_dphy_rx_validate, > +}; > + > +static int cdns_dphy_rx_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct phy_provider *provider; > + struct cdns_dphy_rx *dphy; > + > + dphy = devm_kzalloc(dev, sizeof(*dphy), GFP_KERNEL); > + if (!dphy) > + return -ENOMEM; > + > + dev_set_drvdata(dev, dphy); > + dphy->dev = dev; > + > + dphy->regs = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(dphy->regs)) > + return PTR_ERR(dphy->regs); > + > + dphy->phy = devm_phy_create(dev, NULL, &cdns_dphy_rx_ops); > + if (IS_ERR(dphy->phy)) { > + dev_err(dev, "Failed to create PHY: %d\n", PTR_ERR(dphy->phy)); > + return PTR_ERR(dphy->phy); > + } > + > + phy_set_drvdata(dphy->phy, dphy); > + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); > + if (IS_ERR(provider)) { > + dev_err(dev, "Failed to register PHY provider: %d\n", > + PTR_ERR(provider)); > + return PTR_ERR(provider); > + } > + > + return 0; > +} > + > +static const struct of_device_id cdns_dphy_rx_of_match[] = { > + { .compatible = "cdns,dphy-rx" }, > + { /* sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(of, cdns_dphy_rx_of_match); > + > +static struct platform_driver cdns_dphy_rx_platform_driver = { > + .probe = cdns_dphy_rx_probe, > + .driver = { > + .name = "cdns-mipi-dphy-rx", > + .of_match_table = cdns_dphy_rx_of_match, > + }, > +}; > +module_platform_driver(cdns_dphy_rx_platform_driver); > + > +MODULE_AUTHOR("Pratyush Yadav "); > +MODULE_DESCRIPTION("Cadence D-PHY Rx Driver"); > +MODULE_LICENSE("GPL v2"); This should be "GPL". "GPL v2" exists for historical reasons (see Documentation/process/license-rules.rst). Reviewed-by: Laurent Pinchart -- Regards, Laurent Pinchart -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy