All of lore.kernel.org
 help / color / mirror / Atom feed
From: Minchan Kim <minchan@kernel.org>
To: Yu Zhao <yuzhao@google.com>
Cc: Mauricio Faria de Oliveira <mfo@canonical.com>,
	"Huang, Ying" <ying.huang@intel.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Linux-MM <linux-mm@kvack.org>,
	linux-block@vger.kernel.org, Miaohe Lin <linmiaohe@huawei.com>,
	Yang Shi <shy828301@gmail.com>
Subject: Re: [PATCH v2] mm: fix race between MADV_FREE reclaim and blkdev direct IO read
Date: Thu, 13 Jan 2022 16:35:31 -0800	[thread overview]
Message-ID: <YeDFU3k7pkMpTl6T@google.com> (raw)
In-Reply-To: <CAOUHufZk1YF5g4b33Sz8WHaKooCcF-KoiHO+sw3XjiHEGhkPEQ@mail.gmail.com>

On Thu, Jan 13, 2022 at 12:29:51AM -0700, Yu Zhao wrote:
> On Wed, Jan 12, 2022 at 2:53 PM Mauricio Faria de Oliveira
> <mfo@canonical.com> wrote:
> >
> > Hi Minchan Kim,
> >
> > Thanks for handling the hard questions! :)
> >
> > On Wed, Jan 12, 2022 at 2:33 PM Minchan Kim <minchan@kernel.org> wrote:
> > >
> > > On Wed, Jan 12, 2022 at 09:46:23AM +0800, Huang, Ying wrote:
> > > > Yu Zhao <yuzhao@google.com> writes:
> > > >
> > > > > On Wed, Jan 05, 2022 at 08:34:40PM -0300, Mauricio Faria de Oliveira wrote:
> > > > >> diff --git a/mm/rmap.c b/mm/rmap.c
> > > > >> index 163ac4e6bcee..8671de473c25 100644
> > > > >> --- a/mm/rmap.c
> > > > >> +++ b/mm/rmap.c
> > > > >> @@ -1570,7 +1570,20 @@ static bool try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
> > > > >>
> > > > >>                    /* MADV_FREE page check */
> > > > >>                    if (!PageSwapBacked(page)) {
> > > > >> -                          if (!PageDirty(page)) {
> > > > >> +                          int ref_count = page_ref_count(page);
> > > > >> +                          int map_count = page_mapcount(page);
> > > > >> +
> > > > >> +                          /*
> > > > >> +                           * The only page refs must be from the isolation
> > > > >> +                           * (checked by the caller shrink_page_list() too)
> > > > >> +                           * and one or more rmap's (dropped by discard:).
> > > > >> +                           *
> > > > >> +                           * Check the reference count before dirty flag
> > > > >> +                           * with memory barrier; see __remove_mapping().
> > > > >> +                           */
> > > > >> +                          smp_rmb();
> > > > >> +                          if ((ref_count - 1 == map_count) &&
> > > > >> +                              !PageDirty(page)) {
> > > > >>                                    /* Invalidate as we cleared the pte */
> > > > >>                                    mmu_notifier_invalidate_range(mm,
> > > > >>                                            address, address + PAGE_SIZE);
> > > > >
> > > > > Out of curiosity, how does it work with COW in terms of reordering?
> > > > > Specifically, it seems to me get_page() and page_dup_rmap() in
> > > > > copy_present_pte() can happen in any order, and if page_dup_rmap()
> > > > > is seen first, and direct io is holding a refcnt, this check can still
> > > > > pass?
> > > >
> > > > I think that you are correct.
> > > >
> > > > After more thoughts, it appears very tricky to compare page count and
> > > > map count.  Even if we have added smp_rmb() between page_ref_count() and
> > > > page_mapcount(), an interrupt may happen between them.  During the
> > > > interrupt, the page count and map count may be changed, for example,
> > > > unmapped, or do_swap_page().
> > >
> > > Yeah, it happens but what specific problem are you concerning from the
> > > count change under race? The fork case Yu pointed out was already known
> > > for breaking DIO so user should take care not to fork under DIO(Please
> > > look at O_DIRECT section in man 2 open). If you could give a specific
> > > example, it would be great to think over the issue.
> > >
> > > I agree it's little tricky but it seems to be way other place has used
> > > for a long time(Please look at write_protect_page in ksm.c).
> >
> > Ah, that's great to see it's being used elsewhere, for DIO particularly!
> >
> > > So, here what we missing is tlb flush before the checking.
> >
> > That shouldn't be required for this particular issue/case, IIUIC.
> > One of the things we checked early on was disabling deferred TLB flush
> > (similarly to what you've done), and it didn't help with the issue; also, the
> > issue happens on uniprocessor mode too (thus no remote CPU involved.)
> 
> Fast gup doesn't block tlb flush; it only blocks IPI used when freeing
> page tables. So it's expected that forcing a tlb flush doesn't fix the
> problem.
> 
> But it still seems to me the fix is missing smp_mb(). IIUC, a proper
> fix would require, on the dio side
> inc page refcnt
> smp_mb()
> read pte
> 
> and on the rmap side
> clear pte
> smp_mb()
> read page refcnt
> 
> try_grab_compound_head() implies smp_mb, but i don't think
> ptep_get_and_clear() does.
> 
> mapcount, as Minchan said, probably is irrelevant given dio is already
> known to be broken with fork.
> 
> I glanced at the thread and thought it might be worth menthing.

If the madv_freed page is shared among processes, it means the ptes
pointing the page are CoW state. If DIO is about to work with the
page, gup_fast will fallback to slow path and then break the CoW
using faultin_page before the submit bio. Thus, the page is not
shared any longer and the pte was alrady marked as dirty on fault
handling. Thus, I think there is no race.

Only, problem is race between DIO and reclaim on exclusive private
madv_free page. In the case, page_count would be only racy.
If ptep_get_and_clear is unordered, yeah, we need barrier there.
(Looks like unorder since ARM uses xchg_relaxed).

  reply	other threads:[~2022-01-14  0:35 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-05 23:34 [PATCH v2] mm: fix race between MADV_FREE reclaim and blkdev direct IO read Mauricio Faria de Oliveira
2022-01-06 23:15 ` Minchan Kim
2022-01-07  0:11   ` Yang Shi
2022-01-07  1:08     ` Yang Shi
2022-01-11  1:34   ` Huang, Ying
2022-01-11  6:48 ` Yu Zhao
2022-01-11 18:54   ` Minchan Kim
2022-01-11 19:29     ` John Hubbard
2022-01-11 20:20       ` Minchan Kim
2022-01-11 20:21         ` Minchan Kim
2022-01-11 21:59           ` Minchan Kim
2022-01-11 23:38             ` John Hubbard
2022-01-12  0:01               ` Minchan Kim
2022-01-12  1:46   ` Huang, Ying
2022-01-12 17:33     ` Minchan Kim
2022-01-12 21:53       ` Mauricio Faria de Oliveira
2022-01-12 22:37         ` Minchan Kim
2022-01-13  8:54           ` Huang, Ying
2022-01-13 12:30             ` Huang, Ying
2022-01-13 14:54               ` Mauricio Faria de Oliveira
2022-01-13 14:30           ` Mauricio Faria de Oliveira
2022-01-13  7:29         ` Yu Zhao
2022-01-14  0:35           ` Minchan Kim [this message]
2022-01-31 23:10             ` Mauricio Faria de Oliveira
2022-01-13  5:47       ` Huang, Ying
2022-01-13  6:37         ` Miaohe Lin
2022-01-13  8:04           ` Huang, Ying

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YeDFU3k7pkMpTl6T@google.com \
    --to=minchan@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=linmiaohe@huawei.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mfo@canonical.com \
    --cc=shy828301@gmail.com \
    --cc=ying.huang@intel.com \
    --cc=yuzhao@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.