From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D69B0C433EF for ; Sun, 20 Feb 2022 12:17:27 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S243707AbiBTMRr (ORCPT ); Sun, 20 Feb 2022 07:17:47 -0500 Received: from mxb-00190b01.gslb.pphosted.com ([23.128.96.19]:33496 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S243691AbiBTMRq (ORCPT ); Sun, 20 Feb 2022 07:17:46 -0500 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [IPv6:2001:4b98:dc2:55:216:3eff:fef7:d647]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 6FAC14D608 for ; Sun, 20 Feb 2022 04:17:24 -0800 (PST) Received: from pendragon.ideasonboard.com (62-78-145-57.bb.dnainternet.fi [62.78.145.57]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 9D7BF25B; Sun, 20 Feb 2022 13:17:22 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1645359442; bh=dZZUndK8wpQY2PnynRgyDsTRMI1YwmXBpx65hmYGgk8=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=vJdL+u6NTdURc6EDUaoH0l7Vvw5pvYjFq0MmmwMp7M8q/4pFZlZoq4gi2MRI6eAB6 ciC/TNxmCZix8RAfV38B5xcvuvOSLi62t540OXohliVvdJMJ/MEquKcRpwcdIvjADU BZt20hcmG+V0A8LUjvW1G0N0nqEvcdEH4POG8D5E= Date: Sun, 20 Feb 2022 14:17:12 +0200 From: Laurent Pinchart To: Jacopo Mondi Cc: Steve Longerbeam , sakari.ailus@iki.fi, hverkuil-cisco@xs4all.nl, mirela.rabulea@nxp.com, xavier.roumegue@oss.nxp.com, tomi.valkeinen@ideasonboard.com, hugues.fruchet@st.com, prabhakar.mahadev-lad.rj@bp.renesas.com, aford173@gmail.com, festevam@gmail.com, Eugen.Hristev@microchip.com, jbrunet@baylibre.com, Mauro Carvalho Chehab , linux-media@vger.kernel.org Subject: Re: [PATCH v2 07/23] media: ov5640: Rework CSI-2 clock tree Message-ID: References: <20220210110458.152494-1-jacopo@jmondi.org> <20220210110458.152494-8-jacopo@jmondi.org> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: <20220210110458.152494-8-jacopo@jmondi.org> Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Hi Jacopo, Thank you for the patch. On Thu, Feb 10, 2022 at 12:04:42PM +0100, Jacopo Mondi wrote: > Re-work the ov5640_set_mipi_pclk() function to calculate the > PLL configuration using the pixel_rate and link_freq values set at > s_fmt time. > > Rework the DVP clock mode settings to calculate the pixel clock > internally and remove the assumption on the 16bpp format. > > Tested in MIPI CSI-2 mode with 1 and 2 data lanes with: > - all the sensor supported resolutions in UYVY and RGB565 formats. > - resolutions >= 1280x720 in RAW Bayer format. > - resolutions < 1280x720 in RGB888 format. > > Signed-off-by: Jacopo Mondi > --- > drivers/media/i2c/ov5640.c | 189 ++++++++++++++++++------------------- > 1 file changed, 90 insertions(+), 99 deletions(-) > > diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c > index 50b611697470..eb4789ae6abf 100644 > --- a/drivers/media/i2c/ov5640.c > +++ b/drivers/media/i2c/ov5640.c > @@ -90,6 +90,7 @@ > #define OV5640_REG_POLARITY_CTRL00 0x4740 > #define OV5640_REG_MIPI_CTRL00 0x4800 > #define OV5640_REG_DEBUG_MODE 0x4814 > +#define OV5640_REG_PCLK_PERIOD 0x4837 > #define OV5640_REG_ISP_FORMAT_MUX_CTRL 0x501f > #define OV5640_REG_PRE_ISP_TEST_SET1 0x503d > #define OV5640_REG_SDE_CTRL0 0x5580 > @@ -922,20 +923,10 @@ static int ov5640_mod_reg(struct ov5640_dev *sensor, u16 reg, > * +-----+-----+ > * +------------> PCLK > * > - * This is deviating from the datasheet at least for the register > - * 0x3108, since it's said here that the PCLK would be clocked from > - * the PLL. > - * > - * There seems to be also (unverified) constraints: > + * There seems to be also constraints: > * - the PLL pre-divider output rate should be in the 4-27MHz range > * - the PLL multiplier output rate should be in the 500-1000MHz range > * - PCLK >= SCLK * 2 in YUV, >= SCLK in Raw or JPEG > - * > - * In the two latter cases, these constraints are met since our > - * factors are hardcoded. If we were to change that, we would need to > - * take this into account. The only varying parts are the PLL > - * multiplier and the system clock divider, which are shared between > - * all these clocks so won't cause any issue. > */ > > /* > @@ -954,13 +945,6 @@ static int ov5640_mod_reg(struct ov5640_dev *sensor, u16 reg, > #define OV5640_SYSDIV_MIN 1 > #define OV5640_SYSDIV_MAX 16 > > -/* > - * Hardcode these values for scaler and non-scaler modes. > - * FIXME: to be re-calcualted for 1 data lanes setups > - */ > -#define OV5640_MIPI_DIV_PCLK 2 > -#define OV5640_MIPI_DIV_SCLK 1 > - > /* > * This is supposed to be ranging from 1 to 2, but the value is always > * set to 2 in the vendor kernels. > @@ -1071,69 +1055,77 @@ static unsigned long ov5640_calc_sys_clk(struct ov5640_dev *sensor, > * ov5640_set_mipi_pclk() - Calculate the clock tree configuration values > * for the MIPI CSI-2 output. > * > - * @rate: The requested bandwidth per lane in bytes per second. > - * 'Bandwidth Per Lane' is calculated as: > - * bpl = HTOT * VTOT * FPS * bpp / num_lanes; > - * > - * This function use the requested bandwidth to calculate: > - * - sample_rate = bpl / (bpp / num_lanes); > - * = bpl / (PLL_RDIV * BIT_DIV * PCLK_DIV * MIPI_DIV / num_lanes); > - * > - * - mipi_sclk = bpl / MIPI_DIV / 2; ( / 2 is for CSI-2 DDR) > - * > - * with these fixed parameters: > - * PLL_RDIV = 2; > - * BIT_DIVIDER = 2; (MIPI_BIT_MODE == 8 ? 2 : 2,5); > - * PCLK_DIV = 1; > - * > - * The MIPI clock generation differs for modes that use the scaler and modes > - * that do not. In case the scaler is in use, the MIPI_SCLK generates the MIPI > - * BIT CLk, and thus: > - * > - * - mipi_sclk = bpl / MIPI_DIV / 2; > - * MIPI_DIV = 1; > - * > - * For modes that do not go through the scaler, the MIPI BIT CLOCK is generated > - * from the pixel clock, and thus: > - * > - * - sample_rate = bpl / (bpp / num_lanes); > - * = bpl / (2 * 2 * 1 * MIPI_DIV / num_lanes); > - * = bpl / (4 * MIPI_DIV / num_lanes); > - * - MIPI_DIV = bpp / (4 * num_lanes); > - * > - * FIXME: this have been tested with 16bpp and 2 lanes setup only. > - * MIPI_DIV is fixed to value 2, but it -might- be changed according to the > - * above formula for setups with 1 lane or image formats with different bpp. > - * > - * FIXME: this deviates from the sensor manual documentation which is quite > - * thin on the MIPI clock tree generation part. > + * FIXME: tested with 2 lanes only. Not true anymore, is it ? > */ > -static int ov5640_set_mipi_pclk(struct ov5640_dev *sensor, > - unsigned long rate) > +static int ov5640_set_mipi_pclk(struct ov5640_dev *sensor) > { > - const struct ov5640_mode_info *mode = sensor->current_mode; > + u8 bit_div, mipi_div, p_div, sclk_div, sclk2x_div, root_div; > + struct v4l2_mbus_framefmt *fmt = &sensor->fmt; > u8 prediv, mult, sysdiv; > - u8 mipi_div; > + unsigned long sysclk; > + unsigned long sample_rate; > + u8 pclk_period; > + s64 link_freq; > int ret; > > + /* Use the link frequency computed at ov5640_update_pixel_rate() time. */ > + link_freq = ov5640_csi2_link_freqs[sensor->ctrls.link_freq->cur.val]; > + > /* > - * 1280x720 is reported to use 'SUBSAMPLING' only, > - * but according to the sensor manual it goes through the > - * scaler before subsampling. > + * - mipi_div - Additional divider for the MIPI lane clock. > + * > + * Higher link frequencies would make sysclk > 1GHz. > + * Keep the sysclk low and do not divide in the MIPI domain. > */ > - if (mode->dn_mode == SCALING || > - (mode->id == OV5640_MODE_720P_1280_720)) > - mipi_div = OV5640_MIPI_DIV_SCLK; > + if (link_freq > OV5640_LINK_RATE_MAX) > + mipi_div = 1; > else > - mipi_div = OV5640_MIPI_DIV_PCLK; > + mipi_div = 2; > > - ov5640_calc_sys_clk(sensor, rate, &prediv, &mult, &sysdiv); > + sysclk = link_freq * mipi_div; > + ov5640_calc_sys_clk(sensor, sysclk, &prediv, &mult, &sysdiv); > > - ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL0, > - 0x0f, OV5640_PLL_CTRL0_MIPI_MODE_8BIT); > + /* > + * Adjust PLL parameters to maintain the MIPI_SCLK-to-PCLK ratio; s/;/:/ ? > + * > + * - root_div = 2 (fixed) > + * - bit_div : MIPI 8-bit = 2 > + * MIPI 10-bit = 2.5 > + * - p_div = 1 (fixed) > + * - pll_div = (2 lanes ? mipi_div : 2 * mipi_div) There's no pll_div variable in the code, nothing called "PLL div" in comments, and nothing in the datasheet either as far as I can tell. Based on your reply to the v1 review, I think you mean "p_div" instead of "pll_div". Also, you mentioned there that P_DIV is equal to - 1 data lane = MIPI_DIV (0x3035[3:0]) - 2 data lane = 2 * MIPI_DIV while here you write the opposite. MIPI_DIV * number data lanes seems more logical to me, as the CSI-2 clock frequency should be lower with more data lanes. You could thus write * - p_div is set by the sensor to mipi_div * number of data lanes Let's add a blank line here, and * * This results in the following MIPI_SCLK depending on the number * of lanes: * > + * 2 lanes: MIPI_SCLK = (4 or 5) * PCLK > + * 1 lanes: MIPI_SCLK = (8 or 10) * PCLK > + */ > + root_div = OV5640_PLL_CTRL3_PLL_ROOT_DIV_2; > + bit_div = OV5640_PLL_CTRL0_MIPI_MODE_8BIT; > + p_div = OV5640_PLL_SYS_ROOT_DIVIDER_BYPASS; > > - ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL1, > - 0xff, sysdiv << 4 | mipi_div); > + /* > + * Scaler clock: > + * - YUV: PCLK >= 2 * SCLK > + * - RAW or JPEG: PCLK >= SCLK > + * - sclk2x_div = sclk_div / 2 > + * > + * TODO: test with JPEG. > + */ > + sclk_div = ilog2(OV5640_SCLK_ROOT_DIV); > + sclk2x_div = ilog2(OV5640_SCLK2X_ROOT_DIV); > + > + /* > + * Set the sample period expressed in ns with 1-bit decimal > + * (0x01=0.5ns). > + */ > + sample_rate = ov5640_pixel_rates[sensor->current_mode->pixel_rate] > + * (ov5640_code_to_bpp(fmt->code) / 8); > + pclk_period = 2000000000U / sample_rate; > + > + /* Program the clock tree registers. */ > + ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL0, 0x0f, bit_div); > + if (ret) > + return ret; > + > + ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL1, 0xff, > + (sysdiv << 4) | mipi_div); > if (ret) > return ret; > > @@ -1141,13 +1133,27 @@ static int ov5640_set_mipi_pclk(struct ov5640_dev *sensor, > if (ret) > return ret; > > - ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL3, > - 0x1f, OV5640_PLL_CTRL3_PLL_ROOT_DIV_2 | prediv); > + ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL3, 0x1f, > + root_div | prediv); > + if (ret) > + return ret; > + > + ret = ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x3f, > + (p_div << 4) | (sclk2x_div << 2) | sclk_div); Bits 5:4 of this register are named "PCLK root divider" in the datasheet. Can you rename the variable to pclk_div to match the clock tree diagram in the driver that names it "PCLK Div" ? Another option would be to name ie pclk_root_div and update the clock tree diagram accordingly. The p_div mention in the comment above should be renamed too. > if (ret) > return ret; > > - return ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, > - 0x30, OV5640_PLL_SYS_ROOT_DIVIDER_BYPASS); > + return ov5640_write_reg(sensor, OV5640_REG_PCLK_PERIOD, pclk_period); > +} > + > +static u32 ov5640_calc_pixel_rate(struct ov5640_dev *sensor) > +{ > + u32 rate; > + > + rate = sensor->current_mode->vtot * sensor->current_mode->htot; > + rate *= ov5640_framerates[sensor->current_fr]; > + > + return rate; > } > > static unsigned long ov5640_calc_pclk(struct ov5640_dev *sensor, > @@ -1167,11 +1173,16 @@ static unsigned long ov5640_calc_pclk(struct ov5640_dev *sensor, > return _rate / *pll_rdiv / *bit_div / *pclk_div; > } > > -static int ov5640_set_dvp_pclk(struct ov5640_dev *sensor, unsigned long rate) > +static int ov5640_set_dvp_pclk(struct ov5640_dev *sensor) > { > u8 prediv, mult, sysdiv, pll_rdiv, bit_div, pclk_div; > + u32 rate; > int ret; > > + rate = ov5640_calc_pixel_rate(sensor); > + rate *= ov5640_code_to_bpp(sensor->fmt.code); > + rate /= sensor->ep.bus.parallel.bus_width; > + > ov5640_calc_pclk(sensor, rate, &prediv, &mult, &sysdiv, &pll_rdiv, > &bit_div, &pclk_div); > > @@ -1696,16 +1707,6 @@ ov5640_find_mode(struct ov5640_dev *sensor, enum ov5640_frame_rate fr, > return mode; > } > > -static u64 ov5640_calc_pixel_rate(struct ov5640_dev *sensor) > -{ > - u64 rate; > - > - rate = sensor->current_mode->vtot * sensor->current_mode->htot; > - rate *= ov5640_framerates[sensor->current_fr]; > - > - return rate; > -} > - > /* > * sensor changes between scaling and subsampling, go through > * exposure calculation > @@ -1887,7 +1888,6 @@ static int ov5640_set_mode(struct ov5640_dev *sensor) > enum ov5640_downsize_mode dn_mode, orig_dn_mode; > bool auto_gain = sensor->ctrls.auto_gain->val == 1; > bool auto_exp = sensor->ctrls.auto_exp->val == V4L2_EXPOSURE_AUTO; > - unsigned long rate; > int ret; > > dn_mode = mode->dn_mode; > @@ -1906,19 +1906,10 @@ static int ov5640_set_mode(struct ov5640_dev *sensor) > goto restore_auto_gain; > } > > - /* > - * All the formats we support have 16 bits per pixel, seems to require > - * the same rate than YUV, so we can just use 16 bpp all the time. > - */ > - rate = ov5640_calc_pixel_rate(sensor) * 16; > - if (ov5640_is_csi2(sensor)) { > - rate = rate / sensor->ep.bus.mipi_csi2.num_data_lanes; > - ret = ov5640_set_mipi_pclk(sensor, rate); > - } else { > - rate = rate / sensor->ep.bus.parallel.bus_width; > - ret = ov5640_set_dvp_pclk(sensor, rate); > - } > - > + if (ov5640_is_csi2(sensor)) > + ret = ov5640_set_mipi_pclk(sensor); > + else > + ret = ov5640_set_dvp_pclk(sensor); > if (ret < 0) > return 0; > -- Regards, Laurent Pinchart