From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 8029CC4332F for ; Thu, 24 Mar 2022 13:26:36 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1350435AbiCXN2G (ORCPT ); Thu, 24 Mar 2022 09:28:06 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:34936 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236979AbiCXN2E (ORCPT ); Thu, 24 Mar 2022 09:28:04 -0400 Received: from mail-ot1-f41.google.com (mail-ot1-f41.google.com [209.85.210.41]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DD2A8A775A; Thu, 24 Mar 2022 06:26:31 -0700 (PDT) Received: by mail-ot1-f41.google.com with SMTP id w17-20020a056830111100b005b22c584b93so3269757otq.11; Thu, 24 Mar 2022 06:26:31 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:content-transfer-encoding :in-reply-to; bh=y0IvWNV6/MhmG/UNa7hi1l+d8pm1zx4Wo+VChftwr80=; b=ZpLPnOk4Y0+V4MgrxC2fcjpgdmvo1ubqZgP0YptkEWAHI0ysRn5+JBOEKPTy78xiPI BPidlX5pSAHNABd20kkXpIyyUYDrHbiRvKMKTayJrzz3WyNaeIhdS3mM/0Q4xM46JGif rnWlQ8vKeNX+/qTospT3p3QlLzWeXPkRvNMq5+LNtD7i1JbMlJHgI4Ra/3eKoQO3vAsx EhWkH1JaXbcR3JAJBi2g+wEun/WS51JjO24Ls5IiuAei/0oFD2wMWomC1WvWz1goQNM5 BKKplCAyt6id76Rjhu0WGD4Cs/2w0f/N0jRu90Zsz4SnAUZ43k7V6T5Kz51rBQ7L+Qjd nrJQ== X-Gm-Message-State: AOAM5323P2QiL3AgyYgzZRtMr2eDcFQ5O4XbAa4Ql8UmT96VE6pYsR3M GLelBzGJvAH1ZAhZ2MZiCQ== X-Google-Smtp-Source: ABdhPJws75hWIqsgautO0Ly6fZPQe3oBPYNsg71ris//OG6b7yyrLy4tHt5DfXoXKhuuQNmpDXhqqg== X-Received: by 2002:a05:6830:11d6:b0:5b2:5a37:3cc7 with SMTP id v22-20020a05683011d600b005b25a373cc7mr2031481otq.381.1648128390986; Thu, 24 Mar 2022 06:26:30 -0700 (PDT) Received: from robh.at.kernel.org (66-90-144-107.dyn.grandenetworks.net. [66.90.144.107]) by smtp.gmail.com with ESMTPSA id d20-20020a056830005400b005b22a187045sm1337116otp.11.2022.03.24.06.26.29 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 24 Mar 2022 06:26:30 -0700 (PDT) Received: (nullmailer pid 1918774 invoked by uid 1000); Thu, 24 Mar 2022 13:26:28 -0000 Date: Thu, 24 Mar 2022 08:26:28 -0500 From: Rob Herring To: Sui Jingfeng <15330273260@189.cn> Cc: Qing Zhang , David Airlie , Jiaxun Yang , linux-kernel@vger.kernel.org, Sam Ravnborg , Krzysztof Kozlowski , Dan Carpenter , devicetree@vger.kernel.org, suijingfeng , Thomas Zimmermann , Roland Scheidegger , Andrey Zhizhikin , dri-devel@lists.freedesktop.org, Thomas Bogendoerfer , linux-mips@vger.kernel.org, "David S . Miller" Subject: Re: [PATCH v11 5/7] dt-bindings: display: Add Loongson display controller Message-ID: References: <20220321162916.1116541-1-15330273260@189.cn> <20220321162916.1116541-6-15330273260@189.cn> <199a2869-cd83-d24e-0ad0-25d15d76fc13@189.cn> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Thu, Mar 24, 2022 at 09:48:19AM +0800, Sui Jingfeng wrote: > > On 2022/3/23 21:03, Rob Herring wrote: > > On Wed, Mar 23, 2022 at 11:38:55AM +0800, Sui Jingfeng wrote: > > > On 2022/3/23 04:55, Rob Herring wrote: > > > > On Tue, Mar 22, 2022 at 10:33:45AM +0800, Sui Jingfeng wrote: > > > > > On 2022/3/22 07:20, Rob Herring wrote: > > > > > > On Tue, Mar 22, 2022 at 12:29:14AM +0800, Sui Jingfeng wrote: > > > > > > > From: suijingfeng > > > > > > > > > > > > > Needs a commit message. > > > > > > > > > > > > > Signed-off-by: suijingfeng > > > > > > > Signed-off-by: Sui Jingfeng <15330273260@189.cn> > > > > > > Same person? Don't need both emails. > > > > > Yes,  suijingfeng@loongson.cn is my company's email. But it can not be used > > > > > to send patches to dri-devel, > > > > > > > > > > when send patches with this email, the patch will not be shown on patch > > > > > works. > > > > > > > > > > Emails  are either blocked or got  rejected  by loongson's mail server.  It > > > > > can only receive emails > > > > > > > > > > from you and other people, but not dri-devel. so have to use my personal > > > > > email(15330273260@189.cn) to send patches. > > > > > > > > > > > > --- > > > > > > > .../loongson/loongson,display-controller.yaml | 230 ++++++++++++++++++ > > > > > > > 1 file changed, 230 insertions(+) > > > > > > > create mode 100644 Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml > > > > > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml > > > > > > > new file mode 100644 > > > > > > > index 000000000000..7be63346289e > > > > > > > --- /dev/null > > > > > > > +++ b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml > > > > > > > @@ -0,0 +1,230 @@ > > > > > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > > > > > +%YAML 1.2 > > > > > > > +--- > > > > > > > +$id: http://devicetree.org/schemas/display/loongson/loongson,display-controller.yaml# > > > > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > > > > + > > > > > > > +title: Loongson LS7A1000/LS2K1000/LS2K0500 Display Controller Device Tree Bindings > > > > > > > + > > > > > > > +maintainers: > > > > > > > + - Sui Jingfeng > > > > > > > + > > > > > > > +description: |+ > > > > > > > + > > > > > > > + Loongson display controllers are simple which require scanout buffers > > > > > > > + to be physically contiguous. LS2K1000/LS2K0500 is a SOC, only system > > > > > > > + memory is available. LS7A1000/LS7A2000 is bridge chip which is equipped > > > > > > > + with a dedicated video RAM which is 64MB or more, precise size can be > > > > > > > + read from the PCI BAR 2 of the GPU device(0x0014:0x7A15) in the bridge > > > > > > > + chip. > > > > > > > + > > > > > > > + LSDC has two display pipes, each way has a DVO interface which provide > > > > > > > + RGB888 signals, vertical & horizontal synchronisations, data enable and > > > > > > > + the pixel clock. LSDC has two CRTC, each CRTC is able to scanout from > > > > > > > + 1920x1080 resolution at 60Hz. Each CRTC has two FB address registers. > > > > > > > + > > > > > > > + For LS7A1000, there are 4 dedicated GPIOs whose control register is > > > > > > > + located at the DC register space. They are used to emulate two way i2c, > > > > > > > + One for DVO0, another for DVO1. > > > > > > > + > > > > > > > + LS2K1000 and LS2K0500 SoC grab i2c adapter from other module, either > > > > > > > + general purpose GPIO emulated i2c or hardware i2c in the SoC. > > > > > > > + > > > > > > > + LSDC's display pipeline have several components as below description, > > > > > > > + > > > > > > > + The display controller in LS7A1000: > > > > > > > + ___________________ _________ > > > > > > > + | -------| | | > > > > > > > + | CRTC0 --> | DVO0 ----> Encoder0 ---> Connector0 ---> | Monitor | > > > > > > > + | _ _ -------| ^ ^ |_________| > > > > > > > + | | | | | -------| | | > > > > > > > + | |_| |_| | i2c0 <--------+-------------+ > > > > > > > + | -------| > > > > > > > + | DC IN LS7A1000 | > > > > > > > + | _ _ -------| > > > > > > > + | | | | | | i2c1 <--------+-------------+ > > > > > > > + | |_| |_| -------| | | _________ > > > > > > > + | -------| | | | | > > > > > > > + | CRTC1 --> | DVO1 ----> Encoder1 ---> Connector1 ---> | Panel | > > > > > > > + | -------| |_________| > > > > > > > + |___________________| > > > > > > > + > > > > > > > + Simple usage of LS7A1000 with LS3A4000 CPU: > > > > > > > + > > > > > > > + +------+ +-----------------------------------+ > > > > > > > + | DDR4 | | +-------------------+ | > > > > > > > + +------+ | | PCIe Root complex | LS7A1000 | > > > > > > > + || MC0 | +--++---------++----+ | > > > > > > > + +----------+ HT 3.0 | || || | > > > > > > > + | LS3A4000 |<-------->| +---++---+ +--++--+ +---------+ +------+ > > > > > > > + | CPU |<-------->| | GC1000 | | LSDC |<-->| DDR3 MC |<->| VRAM | > > > > > > > + +----------+ | +--------+ +-+--+-+ +---------+ +------+ > > > > > > > + || MC1 +---------------|--|----------------+ > > > > > > > + +------+ | | > > > > > > > + | DDR4 | +-------+ DVO0 | | DVO1 +------+ > > > > > > > + +------+ VGA <--|ADV7125|<--------+ +-------->|TFP410|--> DVI/HDMI > > > > > > > + +-------+ +------+ > > > > > > > + > > > > > > > + The display controller in LS2K1000/LS2K0500: > > > > > > > + ___________________ _________ > > > > > > > + | -------| | | > > > > > > > + | CRTC0 --> | DVO0 ----> Encoder0 ---> Connector0 ---> | Monitor | > > > > > > > + | _ _ -------| ^ ^ |_________| > > > > > > > + | | | | | | | | > > > > > > > + | |_| |_| | +------+ | > > > > > > > + | <---->| i2c0 |<---------+ > > > > > > > + | DC IN LS2K1000 | +------+ > > > > > > > + | _ _ | +------+ > > > > > > > + | | | | | <---->| i2c1 |----------+ > > > > > > > + | |_| |_| | +------+ | _________ > > > > > > > + | -------| | | | | > > > > > > > + | CRTC1 --> | DVO1 ----> Encoder1 ---> Connector1 ---> | Panel | > > > > > > > + | -------| |_________| > > > > > > > + |___________________| > > > > > > > + > > > > > > > +properties: > > > > > > > + $nodename: > > > > > > > + pattern: "^display-controller@[0-9a-f],[0-9a-f]$" > > > > > > > + > > > > > > > + compatible: > > > > > > > + oneOf: > > > > > > > + - items: > > > > > > > + - enum: > > > > > > > + - loongson,ls7a1000-dc > > > > > > > + - loongson,ls2k1000-dc > > > > > > > + - loongson,ls2k0500-dc > > > > > > > + > > > > > > > + reg: > > > > > > > + maxItems: 1 > > > > > > > + > > > > > > > + interrupts: > > > > > > > + maxItems: 1 > > > > > > > + > > > > > > > + '#address-cells': > > > > > > > + const: 1 > > > > > > > + > > > > > > > + '#size-cells': > > > > > > > + const: 0 > > > > > > > + > > > > > > > + i2c-gpio@0: > > > > > > > + description: | > > > > > > > + Built-in GPIO emulate i2c exported for external display bridge > > > > > > If you have i2c-gpio, that belongs at the DT top-level, not here. > > > > > > > > > > > > > + configuration, onitor detection and edid read back etc, for ls7a1000 > > > > > > > + only. Its compatible must be lsdc,i2c-gpio-0. The reg property can be > > > > > > No, there's a defined i2c-gpio compatible already. > > > > > This is different from the i2c-gpio already defined under drivers/i2c/busses/i2c-gpio.c, > > > > > By design, my i2c-gpio is vendor specific properties, lsdc device driver create the i2c > > > > > adapter at runtime. These are 4 dedicated GPIOs whose control register is located at the > > > > > LSDC register space, not general purpose GPIOs with separate control register resource. > > > > > So i think it is the child node of display-controller@6,1, it belongs to LSDC. > > > > > It seems that put it at the DT top-level break the hierarchy and relationship. > > > > Okay, I see. Then just 'i2c' for the node names. You need a reference to > > > > i2c-controller.yaml for these nodes too. > > > > > > > > The compatible should not have an index in it. > > > OK, i will fix this at the next version. thanks. > > > > > > > + used to specify a I2c adapter bus number, if you don't specify one > > > > > > > + i2c driver core will dynamically assign a bus number. Please specify > > > > > > Bus numbers are a linux detail not relevant to DT binding. > > > > > > > > > > > > > + it only when its bus number matters. Bus number greater than 6 is safe > > > > > > > + because ls7a1000 bridge have 6 hardware I2C controller integrated. > > > > > > > + > > > > > > > + i2c-gpio@1: > > > > > > > + description: | > > > > > > > + Built-in GPIO emulate i2c exported for external display bridge > > > > > > > + configuration, onitor detection and edid read back etc, for ls7a1000 > > > > > > > + only. Its compatible must be lsdc,i2c-gpio-1. > > > > > > > + > > > > > > > + ports: > > > > > > > + $ref: /schemas/graph.yaml#/properties/ports > > > > > > > + > > > > > > > + properties: > > > > > > > + port@0: > > > > > > > + $ref: /schemas/graph.yaml#/properties/port > > > > > > > + description: output port node connected with DPI panels or external encoders, with only one endpoint. > > > > > > > + > > > > > > > + port@1: > > > > > > > + $ref: /schemas/graph.yaml#/properties/port > > > > > > > + description: output port node connected with DPI panels or external encoders, with only one endpoint. > > > > > > > + > > > > > > > + required: > > > > > > > + - port@0 > > > > > > > + - port@1 > > > > > > > + > > > > > > > +required: > > > > > > > + - compatible > > > > > > > + - reg > > > > > > > + - interrupts > > > > > > > + - ports > > > > > > > + > > > > > > > +additionalProperties: false > > > > > > > + > > > > > > > +examples: > > > > > > > + - | > > > > > > > + #include > > > > > > > + bus { > > > > > > > + > > > > > > > + #address-cells = <3>; > > > > > > > + #size-cells = <2>; > > > > > > > + #interrupt-cells = <2>; > > > > > > > + > > > > > > > + display-controller@6,1 { > > > > > > > + compatible = "loongson,ls7a1000-dc"; > > > > > > > + reg = <0x3100 0x0 0x0 0x0 0x0>; > > > > > > > + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; > > > > > > > + > > > > > > > + #address-cells = <1>; > > > > > > > + #size-cells = <0>; > > > > > > > + > > > > > > > + i2c-gpio@0 { > > > > > > > + compatible = "lsdc,i2c-gpio-0"; > > > > > > > + reg = <6>; > > > > 'reg' needs to be documented with some description of what 6 and 7 > > > > represent. If they are the control register offset, then make the > > > > address translatable (use 'ranges' and define the size). > > > By design, the reg property is used to specify a I2c adapter bus number, > > > if we don't specify one, i2c driver core will dynamically assign a bus number. > > > then the nr of the i2c adapter will started from 0. I want is start from 6 > > > to avoid potential conflict feature hardware I2C driver. > > > > > > Because LS7A1000 bridge chip have 6 hardware I2C controller integrated, > > > but its driver is not up-streamed yet. By default these hardware I2C controller's > > > nr is started from 0. > > Linux's numbering doesn't belong in DT. So no, you can't use 'reg' in > > that way. > Then,  can i use something like lsdc,nr = <6> ? > > > Even through i2c driver core can dynamically generate a number, i still want it > > > to be fixed and keep consistent and explicit. That is, i2c6 is for display pipe 0, > > > i2c7 is for display pipe 1. This follow the convention and flexible enough. > > You may want that, but that is not how the kernel works. Specific > > numbers are not guaranteed. I'm sure you've seen this for disks, network > > interfaces, etc. > > > > Rob > > 2c_bit_add_numbered_bus() will guarantee it for you as long as If no devices > have pre-been declared for this bus. > > you can read the comment of 2c_bit_add_numbered_bus() at > drivers/i2c/i2c-core-base.c I didn't say it wasn't possible. It is not best practice. Grep i2c_bit_add_numbered_bus and see how many users there are. Even if the kernel allows specifying bus numbers, your Linux bus numbers don't belong in DT. Rob From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 7D55FC433F5 for ; Thu, 24 Mar 2022 13:26:33 +0000 (UTC) Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id A5B7A10E8B6; Thu, 24 Mar 2022 13:26:32 +0000 (UTC) Received: from mail-ot1-f41.google.com (mail-ot1-f41.google.com [209.85.210.41]) by gabe.freedesktop.org (Postfix) with ESMTPS id E8F8910E8B6 for ; Thu, 24 Mar 2022 13:26:31 +0000 (UTC) Received: by mail-ot1-f41.google.com with SMTP id x8-20020a9d6288000000b005b22c373759so3277234otk.8 for ; Thu, 24 Mar 2022 06:26:31 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:content-transfer-encoding :in-reply-to; bh=y0IvWNV6/MhmG/UNa7hi1l+d8pm1zx4Wo+VChftwr80=; b=L+7bQcFdB9G3aKTnBSmulVXDY6Y++nPVqSEiT0HeQUQ9GvBrkQNFgMYqraejQrB22+ r3fr6Vmz3xa1ej0kBOStcmUfqNfBBvRWAO0PRYWCQvp6L78qbeGGBq+ledS8EDpKLCn1 7+eTYjFxGWvPsZzOzDGEgbXWzSGsQ9tsfx+LQpT2ip8WDKk8rGXXA1CIzw3kxiSuMmoR HGNIwTuY1JU/A0Cqobtm4P9GrZN4sxF+OGMnAsc6znmISzZkuv6R/lmn9nxPyuEVIZ/U Epuv98XgQxrHkfzzuPxax956V+VbSG6brPo1Hzj+u/4wjhgwfoo8LAo48gw8zoxzFT0t Dihw== X-Gm-Message-State: AOAM532b8cEOEFUnnJEdSKuZR7HuxcBcIqKpBe2pzqFmwEA8dzuvEsfw g+GEtKR0CB356t7SvGGPlg== X-Google-Smtp-Source: ABdhPJws75hWIqsgautO0Ly6fZPQe3oBPYNsg71ris//OG6b7yyrLy4tHt5DfXoXKhuuQNmpDXhqqg== X-Received: by 2002:a05:6830:11d6:b0:5b2:5a37:3cc7 with SMTP id v22-20020a05683011d600b005b25a373cc7mr2031481otq.381.1648128390986; Thu, 24 Mar 2022 06:26:30 -0700 (PDT) Received: from robh.at.kernel.org (66-90-144-107.dyn.grandenetworks.net. [66.90.144.107]) by smtp.gmail.com with ESMTPSA id d20-20020a056830005400b005b22a187045sm1337116otp.11.2022.03.24.06.26.29 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 24 Mar 2022 06:26:30 -0700 (PDT) Received: (nullmailer pid 1918774 invoked by uid 1000); Thu, 24 Mar 2022 13:26:28 -0000 Date: Thu, 24 Mar 2022 08:26:28 -0500 From: Rob Herring To: Sui Jingfeng <15330273260@189.cn> Subject: Re: [PATCH v11 5/7] dt-bindings: display: Add Loongson display controller Message-ID: References: <20220321162916.1116541-1-15330273260@189.cn> <20220321162916.1116541-6-15330273260@189.cn> <199a2869-cd83-d24e-0ad0-25d15d76fc13@189.cn> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, Qing Zhang , Thomas Bogendoerfer , suijingfeng , David Airlie , dri-devel@lists.freedesktop.org, Roland Scheidegger , linux-kernel@vger.kernel.org, Krzysztof Kozlowski , linux-mips@vger.kernel.org, Andrey Zhizhikin , Jiaxun Yang , Thomas Zimmermann , Sam Ravnborg , "David S . Miller" , Dan Carpenter Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" On Thu, Mar 24, 2022 at 09:48:19AM +0800, Sui Jingfeng wrote: > > On 2022/3/23 21:03, Rob Herring wrote: > > On Wed, Mar 23, 2022 at 11:38:55AM +0800, Sui Jingfeng wrote: > > > On 2022/3/23 04:55, Rob Herring wrote: > > > > On Tue, Mar 22, 2022 at 10:33:45AM +0800, Sui Jingfeng wrote: > > > > > On 2022/3/22 07:20, Rob Herring wrote: > > > > > > On Tue, Mar 22, 2022 at 12:29:14AM +0800, Sui Jingfeng wrote: > > > > > > > From: suijingfeng > > > > > > > > > > > > > Needs a commit message. > > > > > > > > > > > > > Signed-off-by: suijingfeng > > > > > > > Signed-off-by: Sui Jingfeng <15330273260@189.cn> > > > > > > Same person? Don't need both emails. > > > > > Yes,  suijingfeng@loongson.cn is my company's email. But it can not be used > > > > > to send patches to dri-devel, > > > > > > > > > > when send patches with this email, the patch will not be shown on patch > > > > > works. > > > > > > > > > > Emails  are either blocked or got  rejected  by loongson's mail server.  It > > > > > can only receive emails > > > > > > > > > > from you and other people, but not dri-devel. so have to use my personal > > > > > email(15330273260@189.cn) to send patches. > > > > > > > > > > > > --- > > > > > > > .../loongson/loongson,display-controller.yaml | 230 ++++++++++++++++++ > > > > > > > 1 file changed, 230 insertions(+) > > > > > > > create mode 100644 Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml > > > > > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml > > > > > > > new file mode 100644 > > > > > > > index 000000000000..7be63346289e > > > > > > > --- /dev/null > > > > > > > +++ b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml > > > > > > > @@ -0,0 +1,230 @@ > > > > > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > > > > > +%YAML 1.2 > > > > > > > +--- > > > > > > > +$id: http://devicetree.org/schemas/display/loongson/loongson,display-controller.yaml# > > > > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > > > > + > > > > > > > +title: Loongson LS7A1000/LS2K1000/LS2K0500 Display Controller Device Tree Bindings > > > > > > > + > > > > > > > +maintainers: > > > > > > > + - Sui Jingfeng > > > > > > > + > > > > > > > +description: |+ > > > > > > > + > > > > > > > + Loongson display controllers are simple which require scanout buffers > > > > > > > + to be physically contiguous. LS2K1000/LS2K0500 is a SOC, only system > > > > > > > + memory is available. LS7A1000/LS7A2000 is bridge chip which is equipped > > > > > > > + with a dedicated video RAM which is 64MB or more, precise size can be > > > > > > > + read from the PCI BAR 2 of the GPU device(0x0014:0x7A15) in the bridge > > > > > > > + chip. > > > > > > > + > > > > > > > + LSDC has two display pipes, each way has a DVO interface which provide > > > > > > > + RGB888 signals, vertical & horizontal synchronisations, data enable and > > > > > > > + the pixel clock. LSDC has two CRTC, each CRTC is able to scanout from > > > > > > > + 1920x1080 resolution at 60Hz. Each CRTC has two FB address registers. > > > > > > > + > > > > > > > + For LS7A1000, there are 4 dedicated GPIOs whose control register is > > > > > > > + located at the DC register space. They are used to emulate two way i2c, > > > > > > > + One for DVO0, another for DVO1. > > > > > > > + > > > > > > > + LS2K1000 and LS2K0500 SoC grab i2c adapter from other module, either > > > > > > > + general purpose GPIO emulated i2c or hardware i2c in the SoC. > > > > > > > + > > > > > > > + LSDC's display pipeline have several components as below description, > > > > > > > + > > > > > > > + The display controller in LS7A1000: > > > > > > > + ___________________ _________ > > > > > > > + | -------| | | > > > > > > > + | CRTC0 --> | DVO0 ----> Encoder0 ---> Connector0 ---> | Monitor | > > > > > > > + | _ _ -------| ^ ^ |_________| > > > > > > > + | | | | | -------| | | > > > > > > > + | |_| |_| | i2c0 <--------+-------------+ > > > > > > > + | -------| > > > > > > > + | DC IN LS7A1000 | > > > > > > > + | _ _ -------| > > > > > > > + | | | | | | i2c1 <--------+-------------+ > > > > > > > + | |_| |_| -------| | | _________ > > > > > > > + | -------| | | | | > > > > > > > + | CRTC1 --> | DVO1 ----> Encoder1 ---> Connector1 ---> | Panel | > > > > > > > + | -------| |_________| > > > > > > > + |___________________| > > > > > > > + > > > > > > > + Simple usage of LS7A1000 with LS3A4000 CPU: > > > > > > > + > > > > > > > + +------+ +-----------------------------------+ > > > > > > > + | DDR4 | | +-------------------+ | > > > > > > > + +------+ | | PCIe Root complex | LS7A1000 | > > > > > > > + || MC0 | +--++---------++----+ | > > > > > > > + +----------+ HT 3.0 | || || | > > > > > > > + | LS3A4000 |<-------->| +---++---+ +--++--+ +---------+ +------+ > > > > > > > + | CPU |<-------->| | GC1000 | | LSDC |<-->| DDR3 MC |<->| VRAM | > > > > > > > + +----------+ | +--------+ +-+--+-+ +---------+ +------+ > > > > > > > + || MC1 +---------------|--|----------------+ > > > > > > > + +------+ | | > > > > > > > + | DDR4 | +-------+ DVO0 | | DVO1 +------+ > > > > > > > + +------+ VGA <--|ADV7125|<--------+ +-------->|TFP410|--> DVI/HDMI > > > > > > > + +-------+ +------+ > > > > > > > + > > > > > > > + The display controller in LS2K1000/LS2K0500: > > > > > > > + ___________________ _________ > > > > > > > + | -------| | | > > > > > > > + | CRTC0 --> | DVO0 ----> Encoder0 ---> Connector0 ---> | Monitor | > > > > > > > + | _ _ -------| ^ ^ |_________| > > > > > > > + | | | | | | | | > > > > > > > + | |_| |_| | +------+ | > > > > > > > + | <---->| i2c0 |<---------+ > > > > > > > + | DC IN LS2K1000 | +------+ > > > > > > > + | _ _ | +------+ > > > > > > > + | | | | | <---->| i2c1 |----------+ > > > > > > > + | |_| |_| | +------+ | _________ > > > > > > > + | -------| | | | | > > > > > > > + | CRTC1 --> | DVO1 ----> Encoder1 ---> Connector1 ---> | Panel | > > > > > > > + | -------| |_________| > > > > > > > + |___________________| > > > > > > > + > > > > > > > +properties: > > > > > > > + $nodename: > > > > > > > + pattern: "^display-controller@[0-9a-f],[0-9a-f]$" > > > > > > > + > > > > > > > + compatible: > > > > > > > + oneOf: > > > > > > > + - items: > > > > > > > + - enum: > > > > > > > + - loongson,ls7a1000-dc > > > > > > > + - loongson,ls2k1000-dc > > > > > > > + - loongson,ls2k0500-dc > > > > > > > + > > > > > > > + reg: > > > > > > > + maxItems: 1 > > > > > > > + > > > > > > > + interrupts: > > > > > > > + maxItems: 1 > > > > > > > + > > > > > > > + '#address-cells': > > > > > > > + const: 1 > > > > > > > + > > > > > > > + '#size-cells': > > > > > > > + const: 0 > > > > > > > + > > > > > > > + i2c-gpio@0: > > > > > > > + description: | > > > > > > > + Built-in GPIO emulate i2c exported for external display bridge > > > > > > If you have i2c-gpio, that belongs at the DT top-level, not here. > > > > > > > > > > > > > + configuration, onitor detection and edid read back etc, for ls7a1000 > > > > > > > + only. Its compatible must be lsdc,i2c-gpio-0. The reg property can be > > > > > > No, there's a defined i2c-gpio compatible already. > > > > > This is different from the i2c-gpio already defined under drivers/i2c/busses/i2c-gpio.c, > > > > > By design, my i2c-gpio is vendor specific properties, lsdc device driver create the i2c > > > > > adapter at runtime. These are 4 dedicated GPIOs whose control register is located at the > > > > > LSDC register space, not general purpose GPIOs with separate control register resource. > > > > > So i think it is the child node of display-controller@6,1, it belongs to LSDC. > > > > > It seems that put it at the DT top-level break the hierarchy and relationship. > > > > Okay, I see. Then just 'i2c' for the node names. You need a reference to > > > > i2c-controller.yaml for these nodes too. > > > > > > > > The compatible should not have an index in it. > > > OK, i will fix this at the next version. thanks. > > > > > > > + used to specify a I2c adapter bus number, if you don't specify one > > > > > > > + i2c driver core will dynamically assign a bus number. Please specify > > > > > > Bus numbers are a linux detail not relevant to DT binding. > > > > > > > > > > > > > + it only when its bus number matters. Bus number greater than 6 is safe > > > > > > > + because ls7a1000 bridge have 6 hardware I2C controller integrated. > > > > > > > + > > > > > > > + i2c-gpio@1: > > > > > > > + description: | > > > > > > > + Built-in GPIO emulate i2c exported for external display bridge > > > > > > > + configuration, onitor detection and edid read back etc, for ls7a1000 > > > > > > > + only. Its compatible must be lsdc,i2c-gpio-1. > > > > > > > + > > > > > > > + ports: > > > > > > > + $ref: /schemas/graph.yaml#/properties/ports > > > > > > > + > > > > > > > + properties: > > > > > > > + port@0: > > > > > > > + $ref: /schemas/graph.yaml#/properties/port > > > > > > > + description: output port node connected with DPI panels or external encoders, with only one endpoint. > > > > > > > + > > > > > > > + port@1: > > > > > > > + $ref: /schemas/graph.yaml#/properties/port > > > > > > > + description: output port node connected with DPI panels or external encoders, with only one endpoint. > > > > > > > + > > > > > > > + required: > > > > > > > + - port@0 > > > > > > > + - port@1 > > > > > > > + > > > > > > > +required: > > > > > > > + - compatible > > > > > > > + - reg > > > > > > > + - interrupts > > > > > > > + - ports > > > > > > > + > > > > > > > +additionalProperties: false > > > > > > > + > > > > > > > +examples: > > > > > > > + - | > > > > > > > + #include > > > > > > > + bus { > > > > > > > + > > > > > > > + #address-cells = <3>; > > > > > > > + #size-cells = <2>; > > > > > > > + #interrupt-cells = <2>; > > > > > > > + > > > > > > > + display-controller@6,1 { > > > > > > > + compatible = "loongson,ls7a1000-dc"; > > > > > > > + reg = <0x3100 0x0 0x0 0x0 0x0>; > > > > > > > + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; > > > > > > > + > > > > > > > + #address-cells = <1>; > > > > > > > + #size-cells = <0>; > > > > > > > + > > > > > > > + i2c-gpio@0 { > > > > > > > + compatible = "lsdc,i2c-gpio-0"; > > > > > > > + reg = <6>; > > > > 'reg' needs to be documented with some description of what 6 and 7 > > > > represent. If they are the control register offset, then make the > > > > address translatable (use 'ranges' and define the size). > > > By design, the reg property is used to specify a I2c adapter bus number, > > > if we don't specify one, i2c driver core will dynamically assign a bus number. > > > then the nr of the i2c adapter will started from 0. I want is start from 6 > > > to avoid potential conflict feature hardware I2C driver. > > > > > > Because LS7A1000 bridge chip have 6 hardware I2C controller integrated, > > > but its driver is not up-streamed yet. By default these hardware I2C controller's > > > nr is started from 0. > > Linux's numbering doesn't belong in DT. So no, you can't use 'reg' in > > that way. > Then,  can i use something like lsdc,nr = <6> ? > > > Even through i2c driver core can dynamically generate a number, i still want it > > > to be fixed and keep consistent and explicit. That is, i2c6 is for display pipe 0, > > > i2c7 is for display pipe 1. This follow the convention and flexible enough. > > You may want that, but that is not how the kernel works. Specific > > numbers are not guaranteed. I'm sure you've seen this for disks, network > > interfaces, etc. > > > > Rob > > 2c_bit_add_numbered_bus() will guarantee it for you as long as If no devices > have pre-been declared for this bus. > > you can read the comment of 2c_bit_add_numbered_bus() at > drivers/i2c/i2c-core-base.c I didn't say it wasn't possible. It is not best practice. Grep i2c_bit_add_numbered_bus and see how many users there are. Even if the kernel allows specifying bus numbers, your Linux bus numbers don't belong in DT. Rob